Did the sealant and tape delam from the window or the boat ?
Fred Hazzard
S/V Fury
C 44
Portland Or
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list -
required some additional
adjustment. I ordered my plexi on-line and had the pieces cut locally based on
wooden patterns that I made from very thin plywood.
From: Eric Baumes via CnC-List
Sent: Thursday, August 16, 2018 1:17 PM
To: cnc-list
Cc: Eric Baumes
Subject: Re: Stus-List Windows gone bad
See below
On Thu, Aug 16, 2018 at 11:37 AM, Bill Dakin via CnC-List <
cnc-list@cnc-list.com> wrote:
> Eric, where did you buy your windows?
>
EAB: Plastic-Craft Products in West Nyack NY (local)
> Did you have a pattern from the old ones to cut your own?
>
*EAB: I made a patterns before I
Port Orchard YC, WA.
Original message From: Eric Baumes via CnC-List
Date: 8/16/18 07:28 (GMT-08:00) To: cnc-list
Cc: Eric Baumes Subject:
Stus-List Windows gone bad
Hello,
I re-did my windows this spring on my 34/36.
I used the VHB tape and the 3m building caulk.
3 out
Eric, where did you buy your windows? Did you have a pattern from the old
ones to cut your own? Where did you source your VHB tape?
bd
On Thu, Aug 16, 2018 at 9:28 AM, Eric Baumes via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hello,
>
> I re-did my windows this spring on my 34/36.
>
> I used
via CnC-List
Sent: Thursday, August 16, 2018 11:23 AM
To: cnc-list@cnc-list.com
Cc: Morgan Ellis
Subject: Re: Stus-List Windows gone bad
Hi Eric, Just curious, what was the temperature when you did the project? Did
it stay dry/warm while it was setting?
This is a project that I need to tackle
Hi Eric, Just curious, what was the temperature when you did the project?
Did it stay dry/warm while it was setting?
This is a project that I need to tackle soon and I am really hoping that
you find the issue so that myself and others can avoid the pit fall?
Regards,
Morgan Ellis
SV Meandher
C
(and in your case the caulk).
Good luck.
From: Eric Baumes via CnC-List
Sent: Thursday, August 16, 2018 10:28 AM
To: cnc-list
Cc: Eric Baumes
Subject: Stus-List Windows gone bad
Hello,
I re-did my windows this spring on my 34/36.
I used the VHB tape and the 3m building caulk.
3 out of 4 seemed
I wiped with Acetone prior to bonding :(
On Thu, Aug 16, 2018 at 11:06 AM, Gary Russell via CnC-List <
cnc-list@cnc-list.com> wrote:
> I'm guessing that the surfaces weren't clean enough. I used alcohol to
> clean the surfaces. They must be very clean for VHB or silicone to bond.
>
> Gary
>
I'm guessing that the surfaces weren't clean enough. I used alcohol to
clean the surfaces. They must be very clean for VHB or silicone to bond.
Gary
S/V Kaylarah
'90 C 37+
East Greenwich, RI, USA
~~~_/)~~
On Thu, Aug 16, 2018 at 10:28 AM, Eric Baumes via CnC-List <
Hello,
I re-did my windows this spring on my 34/36.
I used the VHB tape and the 3m building caulk.
3 out of 4 seemed to come out ok, but on the fourth the tape did not bond
very highly.
It started on the very front of the stb port, but I was on the boat when it
was raining and it seems the
11 matches
Mail list logo
