I just cleaned the exhaust elbow on a Yanmar 2GM on a 29 MK? for a client for
the second time in 3-4 years. I have other friends with Yanmars who have never
had to clean the elbow.
This 29 rarely motors longer than from the slip to the harbor entrance and
back. The other boats sometimes motor
Dennis:
I am in the process of replacing the SS wet exhaust muffler with a
Vernalift and, since I am working in the small space, was considering
replacing the whole mixing elbow assembly by removing the piece that
bolts to the exhaust manifold. First, I will remove the 2" hose from
the actua
t [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Robert Abbott
*Sent:* November 16, 2012 12:29
*To:* Dennis C.; cnc-list@cnc-list.com
*Subject:* Stus-List Yanmar exhaust mix elbow pluggage question/survey
Dennis:
I am in the process of replacing the SS wet exhaust muffler with a
Vernali
Dennis:
Questions: When you say "you cleaned the exhaust elbow", was it only the
'U' shaped piece you took off to clean or did you remove the whole
assembly via the 4 bolts from the exhaust manifold?
If it was only the actual 'U' shaped mixing elbow, how did you remove it
from the 'coupler'
th Street, Fourth Floor
Louisville, Kentucky 40202
502-584-7255
-Original Message-
From: Robert Abbott
To: Dennis C. ; cnc-list
Sent: Fri, Nov 16, 2012 9:59 pm
Subject: Stus-List Yanmar exhaust mix elbow pluggage question/survey
Dennis:
Questions: When you say "you cleaned the ex
Dennis,
Unless he is revving the engine at some point, carbon is building up and
never getting blown out. The Yanmar procedure for shut down on my 3GM is
to idle for 5 minutes, then rev the engine to full throttle for several
seconds before returning to idle and shutting down.
Joel
35/3
On Fri
nfirm that this was the
"fix", but sincerely hope so!
Indigo - 25MkIII
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
Sent: Friday, November 16, 2012 10:57 AM
To: Cn Clist
Subject: Stus-List Yanmar exhaust mix elbow pluggage question/survey
There's a place in Halifax that sells them, under 200 I think.
On 2012-11-16, at 12:31 PM, "Robert Abbott"
mailto:robertabb...@eastlink.ca>> wrote:
Dennis:
I am in the process of replacing the SS wet exhaust muffler with a Vernalift
and, since I am working in the small space, was considering r
Bob. That elbow is available for around $150 or less. I'll get the info and
post it.
Rich.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
Abbott
Sent: November 16, 2012 12:29
To: Dennis C.; cnc-list@cnc-list.com
Subject: Stus-List Yanmar exhaust mix
Colonial auto parts I think? No fittings though. Burnside, just off Windmill
road
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich C&C
Sent: Friday, November 16, 2012 12:41 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar exhaust mix elbow pluggage ques
:41 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar exhaust mix elbow pluggage question/survey
Bob. That elbow is available for around $150 or less. I’ll get the info and
post it.
Rich.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Abbott
Sent: November
Bob, (and Joel)
Seems to validate my suspicions. I'll copy that info and send to the owner.
BTW, looking up into the elbow may not show the pluggage. I usually find the
pluggage is more in the small elbow where the water enters. It's also in the
"cup" in the upsweep side of the mix elbow wh
I've got a 2GM20F in my C&C26.
Lake sailing, so out of the mooring field and sails up. Never gets a chance to
warm up.
First season I had the boat, the water just dribbled out the exhaust. Doing the
easy stuff first I unscrewed the small water elbow on top of the mixing elbow.
Plugged solid wit
Yanmar exhaust mix elbow pluggage question/survey
I just cleaned the exhaust elbow on a Yanmar 2GM on a 29 MK? for a client
for the second time in 3-4 years. I have other friends with Yanmars who
have never had to clean the elbow.
This 29 rarely motors longer than from the slip to the harbo
Stus-List Yanmar exhaust mix elbow pluggage question/survey
Dennis:
I am in the process of replacing the SS wet exhaust muffler with a Vernalift
and, since I am working in the small space, was considering replacing the
whole mixing elbow assembly by removing the piece that bolts to the exhaust
..@cnc-list.com] On Behalf Of Dennis C.
Sent: November 16, 2012 12:49 PM
To: Robert Abbott; Cn Clist
Subject: Re: Stus-List Yanmar exhaust mix elbow pluggage question/survey
Bob, (and Joel)
Seems to validate my suspicions. I'll copy that info and send to the owner.
BTW, looking
Bob,
I removed the whole assembly. The main passage of the "U" shaped piece (mix
elbow) was clear.
Here's the whole deal. First I cranked the engine to verify no water
discharge. Then I pulled the manifold water hose from small elbow. Seeing
flow there, I knew the pump, heat exchanger, man
Offices
235 South Fifth Street, Fourth Floor
Louisville, Kentucky 40202
502-584-7255
-Original Message-
From: Robert Abbott
To: Dennis C. ; cnc-list
Sent: Fri, Nov 16, 2012 9:59 pm
Subject: Stus-List Yanmar exhaust mix elbow pluggage question/survey
Dennis:
Questions: When you say
18 matches
Mail list logo