Re: Stus-List Epoxy or not.

. D.* > > *Gulf Stream Associates, LLC* > > > *(401) 419-4650 * > > -- > *From:* CnC-List on behalf of Hoyt, Mike > via CnC-List > *Sent:* Wednesday, February 20, 2019 11:52 AM > *To:* cnc-list@cnc-list.com > *Cc:* Hoyt, Mike > *Su

Stus-List Epoxy or not

I purchased Alegria in 2006.  Th teak was in and shapebut could have been lots worse.  I sanded to fresh teak, applied 3 coats of Cetol and 2 to coats of clear per their instructions.  Going on 12 years later with only a scotchbright ruff up and cleaning.I have a few dings to clean up, b

Re: Stus-List Epoxy or not.

es, LLC > (401) 419-4650 > > From: CnC-List on behalf of Hoyt, Mike via > CnC-List > Sent: Wednesday, February 20, 2019 11:52 AM > To: cnc-list@cnc-list.com > Cc: Hoyt, Mike > Subject: Re: Stus-List Epoxy or not. > > Hi Marc > > Cetol Light is a bi

Re: Stus-List Epoxy or not.

-list.com Cc: Hoyt, Mike Subject: Re: Stus-List Epoxy or not. Hi Marc Cetol Light is a bit less orange than regular Cetol. I normally use a brush to apply. It still has an orange tinge but looks oh so much better than a weathered peeling handrail! Somewhat less work than varnish as in my

Re: Stus-List Epoxy or not.

f Of David via CnC-List Sent: Tuesday, February 19, 2019 8:02 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: David Subject: Re: Stus-List Epoxy or not. I have stripped twice. 6 coats of Cetol with one maintenance coat per season. Done. From my Android _

Re: Stus-List Epoxy or not.

*David > via CnC-List > *Sent:* Tuesday, February 19, 2019 8:02 PM > *To:* cnc-list@cnc-list.com > *Cc:* David > *Subject:* Re: Stus-List Epoxy or not. > > > > I have stripped twice. 6 coats of Cetol with one maintenance coat per > season. Done. > > From my Andro

Re: Stus-List Epoxy or not.

coats every year or two. Mike Persistence Halifax, NS www.hoytsailing.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent: Tuesday, February 19, 2019 8:02 PM To: cnc-list@cnc-list.com Cc: David Subject: Re: Stus-List Epoxy or not. I have stripped

Re: Stus-List epoxy or not

ter to go with a UV-protectant varnish which, unlike with stainless, you will be doing again someday.     Good luck.     Matt From: John Conklin via CnC-List Sent: Monday, February 18, 2019 10:10 PM To: cnc-list@cnc-list.com Cc: John Conklin Subject: Re: Stus-List Epoxy or not. Me too 2nd  t

Re: Stus-List Epoxy or not.

nce the epoxy isn't UV protected, cover it with 3 or 4 coats of varnish. You may have to clean and reapply the varnish as usual, but the penetrating epoxy will last for life and keep the wood sealed. Steve Original Message ---- Subject: Stus-List Epoxy or not. From: Bev Parslo

Re: Stus-List Epoxy or not.

February 19, 2019 6:18 PM > To: CnClist > Cc: Dennis C. > Subject: Re: Stus-List Epoxy or not. > > Why not plastic teak handrails? > > https://www.plasteak.com/plasteak-recycled-plastic-product/custom-handrails-78in-wide > > Dennis C. > Touche' 35-1 #83 > M

Re: Stus-List Epoxy or not.

Yes I like that stuff! I think Beneteau (cough) also uses it just for a nice toe rail on newer models. John Conklin S/V Halcyon On Feb 19, 2019, at 6:17 PM, Dennis C. via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Why not plastic teak handrails? https://www.plasteak.com/plasteak-recycled-

Re: Stus-List Epoxy or not.

list Cc: Dennis C. Subject: Re: Stus-List Epoxy or not. Why not plastic teak handrails? https://www.plasteak.com/plasteak-recycled-plastic-product/custom-handrails-78in-wide Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Feb 19, 2019, 8:19 AM Dreuge via CnC-List mailto:cnc

Re: Stus-List Epoxy or not.

Why not plastic teak handrails? https://www.plasteak.com/plasteak-recycled-plastic-product/custom-handrails-78in-wide Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Feb 19, 2019, 8:19 AM Dreuge via CnC-List wrote: > I’m a big stainless fan, but not so much for handrails in the summer sun. >

Re: Stus-List Epoxy or not.

the epoxy isn't UV protected, cover it with 3 or 4 coats of varnish. You > may have to clean and reapply the varnish as usual, but the penetrating > epoxy will last for life and keep the wood sealed. > > Steve > > > ---- Original Message > Subject: Stus-Lis

Re: Stus-List Epoxy or not.

Another 2 cents.  I would use penetrating epoxy on them.  It soaks into the wood and seals everything (not to mention looks exceptional).  Since the epoxy isn't UV protected, cover it with 3 or 4 coats of varnish.  You may have to clean and reapply the varnish as usual, but the penetrating epoxy wi

Re: Stus-List Epoxy or not.

Starboard. Probably could. From: John Irvin via CnC-List Sent: Tuesday, February 19, 2019 11:34 AM To: cnc-list@cnc-list.com Cc: John Irvin Subject: Re: Stus-List Epoxy or not. I have always wondered if you could make them from the plastic used in cutting boards, etc. Forget what it’s

Re: Stus-List Epoxy or not.

N. Bush  2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original Message- From: Jim Reinardy via CnC-List To: cnc-list Cc: Jim Reinardy Sent: Tue, Feb 19, 2019 11:32 am Subject: Re: Stus-List Epoxy or not. My solution was to have some Sunbrella cover

Re: Stus-List Epoxy or not.

tationary (at the dock or on anchor).  Marek1994 C270 Legato Ottawa, ON From: Dreuge via CnC-ListSent: Tuesday, February 19, 2019 10:19To: cnc-list@cnc-list.com Cc: Dreuge Subject: Re: Stus-List Epoxy or not. I’m a big stainless fan, but not so much for handrails in the summer sun.  I w

Re: Stus-List Epoxy or not.

ls (or any other SS parts) to be hot while sailing. I guess different story when you are stationary (at the dock or on anchor). Marek 1994 C270 Legato Ottawa, ON From: Dreuge via CnC-List Sent: Tuesday, February 19, 2019 10:19 To: cnc-list@cnc-list.com Cc: Dreuge Subject: Re: Stus-List Epoxy or not

Re: Stus-List Epoxy or not.

Sent: Monday, February 18, 2019 9:15:43 PM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List Epoxy or not.   Replace with stainless steel.  I think I paid $100 for each rail.  Custom made to fit the original holes. Whitewatermarine.com https://drive.google.com/folderview?id=0B8pEh5lnv

Re: Stus-List Epoxy or not.

Subject: Re: Stus-List Epoxy or not. I’m a big stainless fan, but not so much for handrails in the summer sun. I was seriously considering stainless for my handrails as I had a friend who went that route. But when I went to admire and be inspired by his rails, I grabbed ahold of one and nearly got

Re: Stus-List Epoxy or not.

quot;C&C List" mailto:cnc-list@cnc-list.com>> > Subject: Re: Stus-List Epoxy or not. > Message-ID: ><mailto:ca+zacrbqcw3b5szxr2q4ehfo45jy2gcald0yyjfb9dzhhe2...@mail.gmail.com>> > Content-Type: text/plain; charset="utf-8" > > Replace w

Re: Stus-List Epoxy or not.

+1 on AwlWood — I did my handrails and dorade boxes a couple of years ago, and they still look great! — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > On Feb 18, 2019, at 5:36 PM, Dave Godwin via CnC-List > wrote: > > You might want

Re: Stus-List Epoxy or not.

-list.com Cc: John Conklin Subject: Re: Stus-List Epoxy or not. Me too 2nd the vote for the stainless! https://drive.google.com/open?id=1ux528c82YTnHOi5ufTJ63xuGtFAm7lYQ John Conklin On Mon, Feb 18, 2019, 6:31 PM Bev Parslow via CnC-List https://www.paypal.me/stumurray

Re: Stus-List Epoxy or not.

: Re: Stus-List Epoxy or not. Replace with stainless steel. I think I paid $100 for each rail. Custom made to fit the original holes. Whitewatermarine.com https://drive.google.com/folderview?id=0B8pEh5lnvP1yd0UxdVVfWkEybjA<https://eur04.safelinks.protection.outlook.com/?url=http

Re: Stus-List Epoxy or not.

Replace with stainless steel. I think I paid $100 for each rail. Custom made to fit the original holes. Whitewatermarine.com https://drive.google.com/folderview?id=0B8pEh5lnvP1yd0UxdVVfWkEybjA Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Mon, Feb 18, 2019, 6:31 PM Bev Parslow via

Re: Stus-List Epoxy or not.

I was advised that if you want to varnish over epoxy that two-part varnish is recommended. I've never tried it. Back in my hole... Dave On Mon, Feb 18, 2019 at 3:56 PM Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: > My experience is that with epoxy/ heavy varnish, when you get a c

Re: Stus-List Epoxy or not.

My experience is that with epoxy/ heavy varnish, when you get a chip or crack down to bare wood, water creeps into the adjoining areas and turns dark. The only fix is strip and do it again. Fred Hazzard S/V Fury C&C 44 Portland, Or On Mon, Feb 18, 2019 at 3:36 PM Dave Godwin via CnC-List < cnc

Re: Stus-List Epoxy or not.

I did one handrail with epoxy first and then several coats of Cabot Spar Varnish. I did the other handrail with just the Spar Varnish. The finish on the epoxied one is more durable. Whatever varnish you use, get one that has UV inhibitors. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR O

Re: Stus-List Epoxy or not.

You might want to investigate AwlWood MA from AwlGrip. I’m using it and like it. Regards, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit > On Feb 18

Stus-List Epoxy or not.

Just doing the teak handrails. They are coming up quite well BUT do I epoxy and then 3-4 coats of varnish or just put the varnish on an skip the epoxy?___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly