Exactly what are you using in your config files, and what commands are you
running? Which image are you using? Are you using a configuration that's
known to work with your network on another machine?
You could also try using wpa_cli to tell you a bit more about what's going on.
Using the /etc/n
did you
ifconfig eth0 up
before?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
over here wifi is up and runninng using wpa-psk. i get almost the same errors,
only missing the lines with
ioctl[SIOCSIWENCODE]: Input/output error
- but its working. you could try running wpa_supplicant with the -dd option
(and | less, maybe) and see what the output tells you.
my wpa_s
After updating and upgrading i now get exactly the same error as when i
specified -Dwext, so something is wrong something still :/
anyone got any ideas?
regards
Kristoffer
flexd skrev:
> This is not working (adding -Dwext) i only get additional errors then:
>
> ioctl[SIOCSIWENCODEEXT]: Operati
This is not working (adding -Dwext) i only get additional errors then:
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Input/output error
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODE]: Input/output error
ioctl[SIOCSIWENCODEEXT]: Operation not supporte
I am using WPA-PSK successfully on the Freerunner using a simple
wpa_supplicant.conf and one extra line in /etc/network/interfaces as
described at the end of http://wiki.openmoko.org/wiki/GTA02_wlan
It is on interface eth0 and the driver is compiled into the kernel rather than
being a module.
well, i did an
opkg update && opkg upgrade
earlier (incl reboot -- new kernel) and it worked with wpa.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
After some test and error on my FR, i have come to the conclusion that
encryption (any type of encryption) does not work on the FR (atleast not
the image it comes with), this seems to be either a kernel
bug/misconfiguration or a problem with wpa_supplicant itself, it seems
to be using PRISM2 dr
iwlist scanning works for me. I followed this guide:
http://wiki.openmoko.org/wiki/GTA02_wlan
On Sat, Jul 5, 2008 at 10:55 PM, Flyin_bbb8 <[EMAIL PROTECTED]> wrote:
> iwconfig? Or
> iwlist scanning?
>
> On 7/5/08, Christoph Anton Mitterer <[EMAIL PROTECTED]> wrote:
>> Hi.
>>
>> I've received my GT
iwconfig? Or
iwlist scanning?
On 7/5/08, Christoph Anton Mitterer <[EMAIL PROTECTED]> wrote:
> Hi.
>
> I've received my GTA02 yesterday :-)
>
> Flashed it to the most recent version
> (http://downloads.openmoko.org/releases/Freerunner/)...
> Unfortunately,... when I try to use WLAN I get this:
> [
On my FR it is device eth0. I'm using my own build of 2007.2.
>
> -- Forwarded message --
> From: Christoph Anton Mitterer <[EMAIL PROTECTED]>
> To: List for Openmoko community discussion
> Date: Sat, 05 Jul 2008 21:52:16 +0200
> Subject: WLAN not wo
Isn't it suppose to be ifconfig eth0 up for that card since it is a hardmac
chip?
Also I'm not sure because I get my FR on ~ Monday, but maybe you have to
modprobe the driver?
On 7/5/08 12:52 PM, "Christoph Anton Mitterer" <[EMAIL PROTECTED]>
wrote:
> Hi.
>
> I've received my GTA02 yesterday :
Hi.
I've received my GTA02 yesterday :-)
Flashed it to the most recent version
(http://downloads.openmoko.org/releases/Freerunner/)...
Unfortunately,... when I try to use WLAN I get this:
[EMAIL PROTECTED]:~# ifup wlan0
Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0
13 matches
Mail list logo