There is a second bug in supermount which does not update the
freespace on
the floppies.
It is not supermount, it seems to be the general FAT feature. Just try
to mount any FAT filesystem directly, (re-)move some files from/to it
and watch df output.
AFAIK there is no easy way to get free
There is no unmounting because usb-storage doesn't remove the
/dev/sda1
entry when clié is no longer connected.. Therefore, there is no way
to
know the device is here or not :((
It tries to remove it. But it can't because it is held busy by
supermount :(
Can this be changed in the
There is no unmounting because usb-storage doesn't remove the
/dev/sda1
entry when clié is no longer connected.. Therefore, there is no
way
to
know the device is here or not :((
It tries to remove it. But it can't because it is held busy by
supermount :(
Sorry, wrong. It
On Thu Aug 01, 2002 at 03:16:35PM +0200, Oden Eriksson wrote:
[...]
Disable privsep is another way to do it.
that means that sshd in default installation has large bug. If
privsep
results in complete user lockout, then _PLEASE_ disable it by
default.
I have disabled it on server side. And I have restarted server after
it.
With privsep enabled it fails differently (just closes connection
with
different messages logged).
What happens if you compile the client without privsep?
Unfortunately, I have really no time to test it in near
On Fridayen den 2 August 2002 12.19, Borsenkow Andrej wrote:
I have disabled it on server side. And I have restarted server
after
it.
With privsep enabled it fails differently (just closes
connection
with
different messages logged).
What happens if you compile
* Wed Jul 31 2002 Warly [EMAIL PROTECTED] 6.40.2-46mdk
[...]
- rc.sysinit: remove ugly/unneeded setting of symlink /dev/mouse (Pixel)
it is ugly I wholeheartedly agree. But if you update then nobody creates
correct devfsd configuration which means this link will be missing.
It is possible to
Now they are attached.
I cannot find anything unusual either. It probably needs recompiling
ide-scsi with debugging - and you have SMP and it may be not SMP-safe.
Unfortunately I will be off for next three weeks at least. Sorry :-/
-andrej
Michal 'hramrach' Suchanek [EMAIL PROTECTED] writes:
I think emacs/joe/nano would do as well.
In debian there is feature sensible-text-editor which is provided by
packages that supply visual text editor for console.
Emacs is far too large, and joe/nano are far less known than vi.
[bor@iap-pxy-mow1 bor]$ sudo rpm -qa openssh\*
openssh-clients-3.4p1-1.1mdk
openssh-3.4p1-1.1mdk
openssh-server-3.4p1-1.1mdk
I cannot log in if password is aged. It definitely was possible before
update. Sshd list is not clear on that matter, there is bug report 188 but
status is not clear; I do
[I know that I should not answer on top ...]
Could you please show
/proc/cmdline
/etc/modules
/etc/modules.conf
output of dmesg (or /var/log/dmesg if it is scrolled off too far)
list of modules before the first cdrecord, after and after the second.
-andrej
Hello,
Since some time I
I recently installed the 9.0 beta in place of 8.2. Now I periodically
get the following error when I try to access my CDROM:
ls: .: Stale NFS file handle
patch went to Juan more than two months ago and has been posted here as
well.
Worked in 8.2.
unlikely. I do not remember any
On Thursdayen den 1 August 2002 10.03, Borsenkow Andrej wrote:
20020426
- (djm) Disable PAM password expiry until a complete fix for bug
#188
exists
disable where?
Disable privsep is another way to do it.
that means that sshd in default installation has large bug
On Thursdayen den 1 August 2002 13.02, Borsenkow Andrej wrote:
On Thursdayen den 1 August 2002 10.03, Borsenkow Andrej wrote:
20020426
- (djm) Disable PAM password expiry until a complete fix for
bug
#188
exists
disable where?
Disable privsep is another
I attached the dmesg.bz2 file.
Also added lsmod outputs.
lsmod1 after booting
lsmod2 after cdrecord -scanbus (only sg got loaded)
lsmod3 after rmmod/modprobe ide-scsi
lsmod4 after cdrecord -scanbus (no change, not attached)
I am sorry, no attachments (message type text/plain). Could you
As I understand Aurora has been dropped for good, can someone clean
up
the
aurora stuff from the initscripts now?
tested patch accepted :)
I have sent patch to the list (and Warly and I guess fredl) two months
ago. It was enough time to test any patch and find if something is
wrong. I
Jure Repinc wrote:
Pixel wrote:
true (i won't implement this)
To bad. Maybe for some future version?
Oh just one more thing. Where can I edit these locale settings by
hand?
~/.i18n
assuming you are using standard profile(s). If not, you are on your own.
Set them in your
This is a kernel bug that was introduced in, I think,
2.4.18 (stock kernel, not a Mandrake bug). I am
hoping this will be fixed in 2.4.19.
Do you mean bug with specific MB vendor or bug with i815 in general? I
assure you I have i815e based MB that has no problems to power down. I
guess
After installing 9.0beta1, performing a ls /mnt/cdrom without a disk
in the cdrom takes a long time (about a minute) to fail. I first
noticed this with rpmdrake, which takes several minutes to start while
it checks for a disk in the cdrom. Placing a CDROM in the drive
prevents this
surely a bios bug, but windows knows the workaround... what a pity ;))
Yes. Windows is using ACPI for a long time already. Linux does not
(reliably).
-andrej
PAscal
Le Lundi 29 Juillet 2002 10:53, Borsenkow Andrej a écrit :
This is a kernel bug that was introduced in, I think
Do you mean bug with specific MB vendor or bug with
i815 in general? I
The bug isn't specific to i815 or any motherboard.
assure you I have i815e based MB that has no
problems to power down. I
guess in this case we are facing BIOS bug, I have
this with some BIOS
versions on
A new ASUS P4B533 doesn't have this problem with any of the kernels in
cooker (enterprise, secure, smp or up) or my customized one.
^^^
Sure? These kernels are all SMP kernels which means APM is disabled by
default == no software power down. Have you forced APM?
Yes, I am really sure from that. Maybe the problem is the ID type
which
according to fdisk is 83 for the partition formatted under Linux and
35
for
the partition formatted under OS/2.
yeah, that's the pb. I only use signature detection for 0x83.
I add 0x35 as JFS. You'll tell me if
Nathan Hopper wrote on Wed, Jul 24, 2002 at 03:56:17PM -0500 :
In 8.2, after telling the installer than, yes, I have a SCSI
interface,
and
it is an ataraid controller, I'm told that it exists, and ataraid is
loaded,
but that's only the first step. In the disk partitioner, the arrays
- on the laptop I have an error when I start the acpi demon : can't
start acpid : can't open /proc/acpi/event : no such file or directory
Mandrake does not have ACPI.
-andrej
After installing 9.0beta1,
what previous kernel version did you have? And, BTW, what kernel
9.0beta1 has? :-)
-andrej
performing a ls /mnt/cdrom without a disk
in the cdrom takes a long time (about a minute) to fail. I first
noticed this with rpmdrake, which takes several minutes to
On 2002.07.23 Thierry Vignaud wrote:
--=-=-=
Name: bash Relocations: (not
relocateable)
Version : 2.05b Vendor: MandrakeSoft
Release : 1mdk Build Date: Tue Jul 23
22:24:01 2002
Hurra !!!
This
cat /proc/slabinfo
Segmentation fault
uname -r
2.4.18-21mdk
Maybe i need to update some packages but proc filesistem is managed by
kernel right?
Right :-)
1Unable to handle kernel paging request at virtual address 6212e039
c02541e7
*pde =
Oops: 0002
CPU:0
EIP:
Wasn't this an issue fixed in one of the pre-kernels already?
(I saw the bug, they were passing in the wrong stuff to a function but
when
I tried to fix I saw that it was fixed in the BK tree.)
I guess it must be still an issue in the Mandrake kernel. :-)
Hmm ...
2.4.19-pre8:
expect a beta next week, feature freeze the week after, another beta
each 15 days up to the release date between the 5th and 10th of
September.
With broken supermount again?
-andrej
On 18 Jul 2002 19:15:46 +0200
Pixel [EMAIL PROTECTED] wrote:
Strangely enough, Both dvd.conf exists as does the symlink
/dev/dvd-hdc.
wierd. (it has been doing this for several installs now.)
hum, rawdevices service may be started to soon after devfsd is run?
so it seems,
I cannot connect to it (timeout). Anybody else having problem?
http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/SPECS/initscripts
-andrej
÷ ðÎÄ, 08.07.2002, × 09:12, Borsenkow Andrej ÎÁÐÉÓÁÌ:
Unfortunately it does mostly the same. The problem is, init s or init 1
do not kill the shell that is currently running on console but still
start yet another instance of (single user) shell. So now you have two
shells fighting
On both 2.4.18-6mdk (from 8.2) and in current cooker pdcraid oopses
immediately after insertion. The reason is usage of uninitialized
variable in drivers/ide/pdcraid.c:
static void __init probedisk(int devindex,int device, int raidlevel)
{
int i;
int major, minor;
struct
I just deleted a large directory from FAT jaz drive (almost the whole
Cygwin distribution). Still both before rm -rf and after df -k shows me
exactly the same values which is rather surprising.
Looks like either df or rm -r do not work properly on FAT, does not it?
-andrej
Oden Eriksson wrote:
The kernel package does not provide kernel ???
[root@cooker /]# rpm -qi kernel
package kernel is not installed
try rpm -qi kernel-2.4.18.21mdk
rpm -q --whatprovides kernel
installed and provides are different things
On Monday 08 July 2002 01:12, Borsenkow Andrej wrote:
About init s - documentation discourages its usage and it is correct
because none shutdown script is run. Still it _must_ kill everything
...
and it currently does not do it.
Just now I realize that init and telinit are the same
÷ ðÎÄ, 08.07.2002, × 11:03, Florent BERANGER ÎÁÐÉÓÁÌ:
Hello,
here the archives.
For infrared tool, put Infrared.pm in /usr/lib/libDrakx,
InfraredDB.gz in /usr/share/ldetect-lst/ and launch
drakir.pl as root.
The tool simply writes alias and options in
/etc/modules.conf (so the
them in /etc/httpd/conf/ssl?
Oh, yes, me stupid:
- certs go in /etc/ssl/apache
Then /etc/httpd/conf/ssl/ssl.httpd-naat-vhost.conf must be fixed to
point to new location, I guess.
-andrej
Borsenkow Andrej [EMAIL PROTECTED] writes:
{pts/2}% sudo service httpd-naat start
Starting httpd
÷ ðÎÄ, 08.07.2002, × 21:59, Florent BERANGER ÎÁÐÉÓÁÌ:
- your alias is wrong for Mandrake. char-major makes no
sense for devfs,
please check what device nodes are registered under
devfs and use
alias /dev/lirc??? lirc_serial
yes, the device file is /dev/lirc, I'll take a look
oh, this brings back memories with the ehci-hcd.o module as well.
similar scenario that it was being unloaded automatically via the
pcmcia
script but it *could be* manually. turned-out, that the ehci-hcd code
is
correct but it resorted to a *known bug* in pcmcia/cardbus code.
ehci code
÷ ÷ÓË, 07.07.2002, × 10:42, civileme ÎÁÐÉÓÁÌ:
Obviously these tasks have to be accomplished at intervals. Some are
asking if the slocate and makewhatis can be done less frequently for a
workstation install, and that is possible (move them from cron.daily to
cron.weekly, for instance),
Good, for a long time I have a small buglet in evolution - attachments
text (size etc) is using incorrect font (wrong character set) and is
unreadable.
Without gnomecc how do you change font used in this case? Strictly
speaking I am not even sure how to do it with gnomecc, but IIRC I did it
once
÷ ÷ÓË, 07.07.2002, × 12:33, Lonnie Borntreger ÎÁÐÉÓÁÌ:
/usr/bin/gtkhtml-properties-capplet
You can run that directly.
Thank you. Well, all fonts that can be set there are set to use KOI8-R
encoding which looks like a bug in Evolution.
In the CVS version of evolution you can go to
Just curious, is it possible to click on a URL in PDF document and get
it opened in browser. You know, like in this other OS :-)
-andrej
on kdelook.org there is a Crystal theme for MCC from dam's (sorry, do
not remember exact URL). Looks really good. Actually it looks too
beautiful for Gtk :-))) Using Mandrake or Crux theme helps a little.
I wonder if it is possible to include it in Mandrake? Or at least make a
contrib/PLF
On Mon, 8 Jul 2002 04:48, Chuck Shirley wrote:
As it
stands, if I need single user mode, I reboot, and tell lilo.
What does...
init 1
...do for you?
Unfortunately it does mostly the same. The problem is, init s or init 1
do not kill the shell that is currently running on
Nobody says it is bad feature. The problem is it requires support in
each application ... and we already have seen Mandrake reaction to
United Linux idea.
Here is another idea how it can be implemented. Daemon that monitors
specific files (e.g. bookmarks) and then distributes changes according
On Sunday 07 July 2002 21:37, Florent BERANGER wrote:
Hi,
I have done :
- Infrared modules config tool (lirc)
- Wine config tool
If you want to test/improve it, send me an email.
Consider the email sent, for the win config tool
me too specifically for infrared. I would
c++ -DHAVE_CONFIG_H -I. -I. -I../..
-I/usr/X11R6/LessTif/Motif1.2/include -I../../nsplugins
-I/usr/lib/qt3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT
-D_REENTRANT -DNDEBUG -DNO_DEBUG -O2 -O3 -pipe -march=i686 -ffast-math
-fno-strength-reduce -fno-exceptions -fno-check-new
÷ óÂÔ, 06.07.2002, × 12:27, Mattias Dahlberg ÎÁÐÉÓÁÌ:
On Fri, 5 Jul 2002, Todd Lyons wrote:
ls -l /etc/cron.daily
ls -l /etc/cron.hourly
Remove the msec link and you get rid of a small portion of the
clobbering. Remove the slocate link and you get rid of a good bit of
the
÷ óÂÔ, 06.07.2002, × 12:02, Borsenkow Andrej ÎÁÐÉÓÁÌ:
c++ -DHAVE_CONFIG_H -I. -I. -I../..
-I/usr/X11R6/LessTif/Motif1.2/include -I../../nsplugins
-I/usr/lib/qt3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT
-D_REENTRANT -DNDEBUG -DNO_DEBUG -O2 -O3 -pipe -march=i686 -ffast-math
-fno
÷ óÂÔ, 06.07.2002, × 12:52, Laurent Montel ÎÁÐÉÓÁÌ:
What ?
I fixed it yesterday. I add lesstiff-devel.
Strange
I use -2mdk, sorry.
But the --wtih-motif-... paths still look wrong to me.
-andrej
Without it audiocd kioslave is not built.
It is not much fun to find it out after 4 hours of compiling :-) And we
are lucky it results in real error message and not silent skipping of
this module ...
-andrej
This Makefile is only for the CVS repository
This will be deleted before making the distribution
*** YOU'RE USING AUTOCONF 2.13. We suggest updating.
*** autoconf 2.5x works best for now, we will drop
*** support for autoconf 2.13 soon.
Should not we BuildRequire autoconf2.5 and set
I was tired that my floppy/Jaz did not support file names in native
encoding when using auto file system type for supermount. There does not
seem to be any elegant way to pass extra options to supermount and ext2
is the only one file system tried for auto that does not support these
options so
÷ óÂÔ, 06.07.2002, × 15:29, Pixel ÎÁÐÉÓÁÌ:
Borsenkow Andrej [EMAIL PROTECTED] writes:
I was tired that my floppy/Jaz did not support file names in native
encoding when using auto file system type for supermount.
wow, i didn't know that supermount was handling auto now
Kernel-secure enables ACLs but it seems gradm is not provided? Is it
intentional? It looks like new grsecurity release has some improvements
in ACL.
-andrej
Requires: kdebase = 3.0.2-2bor ld-linux.so.2 libc.so.6 libDCOP.so.4
libdl.so.2 libfam.so.0 libfreetype.so.6 libgcc_s.so.1 libGL.so.1
libICE.so.6 libjpeg.so.62 libkdecore.so.4 libkdefx.so.4 libkdesu.so.4
libkdeui.so.4 libkio.so.4 liblcms.so.1 libmng.so.1 libm.so.6 libpng.so.3
libpthread.so.0
Currently kdebase.spec does some nasty trick by linking buildroot faces
- /usr/share/faces and then linking apps/kdm/pics/users -
../../../faces. This seems to fail for non-root (due to some obscure
symlink-relativisation problem).
Anyway, I tried to comment out this:
#cd %buildroot/%_datadir
Reading Mandrake HOWTO I got impression that file marked as
%config(missingok) is not required to exist at package build time - as
implied by sentence The %config(missingok) is frequently used for files
like /etc/rc.d/rc2.d/S55named where the (non-)existence of the symlink
is part of the
How do I configure themes for gnome1 now when gnomecc is gone?
-andrej
* Mon Jul 01 2002 Laurent MONTEL [EMAIL PROTECTED] 3.0.2-2mdk
- Move .kde3 - .kde
not quite, only for simplified menu. For normal menu it does install
correct script but overwrites it later:
%if !%buildfor8_0
install -d -m 0755 %buildroot/etc/menu-methods/
install -m 0755 %SOURCE200
Is menudrake still maintained/developed?
There is interesting discussion in newsgroup about menudrake. Start it,
select KDE environment. Create new directory (submenu). Try to move
standard menus into this newly created submenu. You will find that it is
possible with some of them (e.g. Home or
÷ ÷ÓË, 07.07.2002, × 04:46, Adam Williamson ÎÁÐÉÓÁÌ:
On Sat, 2002-07-06 at 17:40, Borsenkow Andrej wrote:
How do I configure themes for gnome1 now when gnomecc is gone?
Someone from IRC #gnome suggests:
http://www.muhri.net/nav.php3?node=gts
Looks just the job :).
Tnx
-andrej
{pts/2}% sudo service httpd-naat start
Starting httpd-naat: [Fri Jul 5 22:34:16 2002] [warn] module
mod_auth_external.c is already added, skipping
Syntax error on line 32 of
/etc/httpd/conf/ssl/ssl.httpd-naat-vhost.conf:
SSLCertificateFile: file '/etc/httpd/conf/ssl/server.crt' not exists or
On Wed, 2002-07-03 at 01:40, J S wrote:
Hi,
I am not a big fan of the graphical boot
i believe this is the bootsplash*.rpm
rpm -qa bootslash
if you see it turn up, then do:
rpm -e bootsplash
this will remove the bootsplash from the system.
... leaving initrd with
bor@cooker% sudo rpm -Fvh *.rpm
Preparing...###
[100%]
file /usr/bin/readlink from install of fileutils-4.1.8-4mdk conflicts with
file from package tetex-1.0.7-44mdk
file /usr/share/man/man1/readlink.1.bz2
bor@cooker% rpm -bb /wrk/rpm/SPECS/kdebase.spec
error: failed build dependencies:
kdelibs-devel = 3.0.2 is needed by kdebase-3.0.2-2mdk
lm_utils conflicts with kdebase-3.0.2-2mdk
liblm_sensors1 conflicts with kdebase-3.0.2-2mdk
kdebase conflicts
Hi,
I am not a big fan of the graphical boot so I changed
my grub.lst file and removed the
initrd line
such that the linux parition that is booting looks
like:
title linux
kernel (hd0,10)/boot/vmlinuz root=/dev/hda11
devfs=mount vga=788 debug
now this worked and the startup
Msec allow_root_login tries to _replace_ PermitRootLogin line in
sshd_config. Unfortunately after new installation this line is commented out
and msec does _not_ insert new line. It means it does not change defaults
whatever you specify in msec configuration.
Possibly applies to any other
On Tue, 02 Jul 2002 08:45:27 +0200
Thierry Vignaud [EMAIL PROTECTED] wrote:
Florent BERANGER [EMAIL PROTECTED] writes:
I have a version that works fine with ATI Rage 128 and Nvidia
(with
Twin view) and use Mdk libraries (interactive). How include it in
Mandrake ( tvconfig as part
÷ ÷ÔÒ, 02.07.2002, × 04:43, Salane ÎÁÐÉÓÁÌ:
It looks like you need to
On Thursday 27 June 2002 01:33 am, Borsenkow Andrej wrote:
cd /mnt/cdrom2
[root@dhcp-342-187 cdrom2]# ls
ls: .: Stale NFS file handle
Fix has been sent to Juan. It is one line change. If anybody is
interested
÷ ÷ÔÒ, 02.07.2002, × 20:30, Brad Felmey ÎÁÐÉÓÁÌ:
# urpme XFree86-libs
removing package libgtk+1.2-1.2.10-14mdk will break your system
removing package XFree86-libs-4.1.0-17mdk will break your system
#
I can't not have X?
well, X libs != X ... you have many applications that are linked
÷ óÂÔ, 29.06.2002, × 23:08, Goetz Waschk ÎÁÐÉÓÁÌ:
Am Samstag, 29. Juni 2002, 13:58:23 Uhr MET, schrieb Borsenkow Andrej:
Running on PIII 733 and trying to play DivX using dxr3 it segfaults. I
can play VCD or MPEG just fine so it looks like a problem with DivX
rather than with dxr3/fame
Shouldn't urpmq act as 'what would have similar urpmi command done
?'
However, it is obviously different:
[root@silbermann guillaume]# urpmq squirrelmail
squirrelmail
[root@silbermann guillaume]# urpmi squirrelmail
Some package have to be removed for others to be upgraded:
Borsenkow Andrej [EMAIL PROTECTED] writes:
ssmtp conflicts with both sendmail and postfix because it installs
/usr/sbin/sendmail. Is it really squirrelmail requires ssmtp?
Ssmtp can of course be changed to use alternatives. Any takers?
What surprised me was no explicit conflicts
Hello,
Why don't compile ACPI modules in standard mandrake kernel?
If ACPI and APM are compiled togheter always APM is use and for
normal
users all works.
For ACPI's people add apm=off in boot parameters and ACPI is ready to
go! :-)
Please do to marc.theaimsgroup.com and search
Borsenkow Andrej [EMAIL PROTECTED] writes:
What surprised me was no explicit conflicts from ssmtp or postfix
(or
even squiremail).
I am not sure I understand.
bor@cooker% rpm -q --conflicts ssmtp
sendmail
postfix
bor@cooker% rpm -q ssmtp
ssmtp-2.50.3-2mdk
[fpons
{pts/2}% grep divx4 config
codec.divx4_libdivxdecore:libdivxdecore.so
codec.divx4_priority:5
but it does not look like it even loads this plugin:
Hi,
you've just found a bug in the divx4 plugin. It tries to dlopen
libdivxdecore.so, but the libdivx4linux0 package contains only
÷ óÂÔ, 29.06.2002, × 23:17, Michael Reinsch ÎÁÐÉÓÁÌ:
I did some further research on this topic and realized that I got
something wrong: it is not because of libasound.so as I said before. It
seems to depend on /usr/share/alsa/alsa.conf which it (alsamixer in the
case below) tries to
÷ óÂÔ, 29.06.2002, × 20:05, Michael Reinsch ÎÁÐÉÓÁÌ:
Sure I have, it is working for me (tm):
load_plugins: audio output plugin alsa09 successfully loaded.
^^
I tried with simple alsa not alsa09. This one works here as well.
Thank you.
-andrej
÷ óÂÔ, 29.06.2002, × 23:08, Goetz Waschk ÎÁÐÉÓÁÌ:
Am Samstag, 29. Juni 2002, 13:58:23 Uhr MET, schrieb Borsenkow Andrej:
Running on PIII 733 and trying to play DivX using dxr3 it segfaults. I
can play VCD or MPEG just fine so it looks like a problem with DivX
rather than with dxr3/fame
I have a scsi card with a cd-rom and a scanner. And I also have a
ide cdrecorder.
I have compiled in support for scsi-emulution, and scsi-cdrom and
generic
scsi support.
have you also compiled in SCSI support layer as module?
When I start up the machine I get:
SCSI subsystem
Running on PIII 733 and trying to play DivX using dxr3 it segfaults. I
can play VCD or MPEG just fine so it looks like a problem with DivX
rather than with dxr3/fame.
{pts/1}% rpm -qa xine-\* libdivx\* libfame\*
xine-oss-0.9.11a-2mdk
libfame0.9-0.9.0-1plf
xine-alsa-0.9.11a-2mdk
It just says plugin failed to initalize. OSS seems to work. Any idea?
-andrej
÷ óÒÄ, 26.06.2002, × 11:18, Brice Figureau ÎÁÐÉÓÁÌ:
On Sun, 2002-06-23 at 13:01, Borsenkow Andrej wrote:
Anybody had success using them in overlay? In which case I am interested
in details (video card, resolution, color depth etc). I vaguely recall
that not every possible resolution/color
÷ óÂÔ, 29.06.2002, × 14:54, Michael Reinsch ÎÁÐÉÓÁÌ:
Hi!
On Sam, 29 Jun 2002 11:59:20 Borsenkow Andrej wrote:
It just says plugin failed to initalize. OSS seems to work. Any idea?
Current alsa libraries need libalsa2-devel, otherwise they don't work.
Install libalsa2-deve and xine
Le Jeudi 27 Juin 2002 07:32, Borsenkow Andrej a écrit :
I had a crash at some time.
Since then, I have installed packages that appears as not
installed.
And what after rpm --rebuilddb?
[...]
Rebuilding the rpm db doesn't help.
I persist.
rpmdrake relies on urpmq
I only wish they could fix the hanging on exit thing too..., the
shopt -s
huponexit does not allways work. Since this seems to be a
bash/openssh
related problem only I think I will try to use ash for a while and see
if
it
disappears.
I wonder if z shell ever hang on exit? (Andrej?)
I'll try to clarify.
your clarification is no more clear than original description.
lets say we have versions A and B of a package. A is the old version,
B
the
new one.
What is old and what is new? You have installed packages and available
packages not old and new.
urpmq replies that
urpmq NEVER reports installed packages. It ALWAYS reports available
packages.
My mistake.
I know see it more clearly.
I just checked, and in fact, my packages are not installed.
Example :
$rpm -q gedit
gedit-1.199.0-1mdk
$urpmq -m -r gedit
gedit-2.0.0-1mdk
$gedit --version
I have kde3 running our of .kde instead of .kde3 but everytime i
install
or
uninstall something it doesn't come out of my menu..but it
modifies
the
menu entries under .kde3/share/applnk-mdk
/etc/menu-methods/kde3:
rootprefix=/usr/share/applnk-mdk
userprefix=.kde3/share/applnk-mdk
I had a crash at some time.
Since then, I have installed packages that appears as not installed.
And what after rpm --rebuilddb?
-andrej
If I want to install them, they pollute my (and your) bandwidth for
finally
telling me that they are already installed.
Every time I refresh the
cd /mnt/cdrom2
[root@dhcp-342-187 cdrom2]# ls
ls: .: Stale NFS file handle
Fix has been sent to Juan. It is one line change. If anybody is
interested I can post patch here.
http://mosix-ltsp.dynu.com/
Is it worth to be included?
-andrej
./mozilla-installer-bin: error while loading shared
libraries: libstdc++-libc6.1-1.so.2: cannot open
shared object file: No such file or directory
any ideas?
bor@cooker% rpm -qf /usr/lib/libstdc++-libc6.1-1.so.2
libstdc++2.10-2.96-0.79mdk
welcome to cooker
-andrej
I searched
÷ ðÎÄ, 24.06.2002, × 19:31, Peter Ruskin ÎÁÐÉÓÁÌ:
On Monday 24 Jun 2002 09:30, Borsenkow Andrej wrote:
./mozilla-installer-bin: error while loading shared
libraries: libstdc++-libc6.1-1.so.2: cannot open
shared object file: No such file or directory
any ideas?
bor@cooker% rpm
Anybody had success using them in overlay? In which case I am interested
in details (video card, resolution, color depth etc). I vaguely recall
that not every possible resolution/color depth works but am too lazy to
try 'em all :-)
-andrej
{pts/1}% alsamixer store
ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL default
alsamixer: function snd_ctl_open failed for default: No such file or
directory
and strace says it doe snot even try to access card. The same with
alsactl.
{pts/0}% rpm -q alsa-utils libalsa2
1 - 100 of 1849 matches
Mail list logo
