a soundblaster live, using the alsa drivers
Are you sure you're using the alsa drivers?
What gives lsmod?
I have an snd-fm801 card and it works perfectly using the alsa
driver (from xmms-alsa-0.9.5-1mdk).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
install which is forbidden and dangerous -
titi agreed to remove it for now, so it should maybe fix a few
other side-effect problems.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
times and I ended up having to hit cancel.
Things went downhill from there, and I ended up having to reboot.
The short story is that I received messages about:
1) mkinitrd failed
Ok, thanks, after more brainstorming we guessed what happened.
It's fixed in the CVS. Thanks!
--
Guillaume
to help?
As root:
modprobe loop
mkinitrd initrd-2.4.19-13mdk.img 2.4.19-13mdk
lilo
This doesn't interest us as it's only a workaround for the
problem - it doesn't help us understand the causes of the
problem.
Don't reboot until you do this.
--
Guillaume Cottenceau - http
..).
it's supposed to authenticate through saslauthd now, but it doesn't
for some reason.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
!!
When in doubt, Luke, let the source be with you! I couldn't
have looked though the code and fixed my own problem if this was
closed source.
Since you looked at the source, can you send a patch proposal on
the source, so we can fix for everyone without needing an ln-s?
Thanks!
--
Guillaume
Jeremy Lacroix [EMAIL PROTECTED] writes:
Okay it worked :-) THX a lot... urpmi seems to work too now, rpmdrake is
segmenting fault.
At what point? Anything in the logs? are you sure rpm/urpmi do
work?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
kernel but can't confirm
this. Anyone?
You'll have to try with noauto, expert, and with a 2.2.19
based alternative boot floppy.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Bryan Whitehead [EMAIL PROTECTED] writes:
Mandrake? any comment? or tips to resolve this?
I've forwarded to the kernel team. I don't know if Juan will have
the time to look over it..
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
module is
here.
Then you may restart devfsd (devfsd /dev) then retry.
If it still fails you may try to modprobe loop by hand.
And tell us what are the results of that all.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
directory should it be?
I never heard about such a smtpd.conf file. I use postfix and I
have no such file on my harddisk.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
to
civserver.bin first):
thx, fixing.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Ben Reser [EMAIL PROTECTED] writes:
On Mon, Sep 16, 2002 at 11:12:46AM +0200, Guillaume Cottenceau wrote:
Is devfsd dead by any chance?
I can't be sure now because I've since rebooted with the new kernel. Is
there something I can do to test this for you?
Next time you see the bug, check
with an nvidia geforec 2 mx.
some cards are known to be bugged when XFree runs along with
bootsplash (e.g. framebuffer mode), so it's simply disabled.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
1.0rc3 encoded streams.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
. Will be in mkinitrd 31mdk.
So a few questions:
in the error message:
'kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno=2'
What is 'errno=2'?
No such file or directory (see /usr/include/asm/errno.h). Which
is pretty strange.
--
Guillaume Cottenceau - http
Jean-Michel Dault [EMAIL PROTECTED] writes:
Le ven 13/09/2002 à 09:39, Guillaume Cottenceau a écrit :
Jean-Michel Dault [EMAIL PROTECTED] writes:
By the way,
When trying to use mkinitrd using the rescue mode of the CD, it
complains about missing /sbin/nash and /sbin/insmod
then. You made me open my eyes on myself,
thanks.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Jerome Whelan [EMAIL PROTECTED] writes:
This update was successful and after applying the updates, my postfix system
is back to normal operation.
Cool! Thanks,
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Guillaume Rousse [EMAIL PROTECTED] writes:
http://freshmeat.net/releases/96879/
bullshit
There are bugfixes in this release, i'm sure they are critical enough to
justify inclusion in 9.0 final :-)
we already have 1.13.0 in cooker!?
--
Guillaume Cottenceau - http://people.mandrakesoft.com
new to
using uucp, have one 8.2 box running fine, using rmail, and just got
mail from the admin of our 'nexthop' box for a machine running rc2
regarding using rmail.postfix intead of rmail).
Buchan
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
in floppy drive,
and type bug
- it will put report.bug on floppy and this file interests us
I'm not sure we can fix, because of vmware, though.
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
SpamKill [EMAIL PROTECTED] writes:
FYI:
RPMDrake - still has no Summary or Description when clicking on a
Package to install.
FYI: you need to right click on the description window to select
Maximum information to get what you want
--
Guillaume Cottenceau - http
. Though
they seem overworked.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
somehow in the drak* tools ? If not, the
you may use the postfix config from webmin.
/var/spool/mail/postfix mailbox gets filled
up without ever beeing read by someone on a
default installation with postfix mail server.
Regards,
Reinhard Katzmann
--
Guillaume Cottenceau - http
have an error which prevents innd from starting:
Can you try inn-2.3.3-1mdk uploaded two days ago and tell us if
it works?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
upgrade to mkbootdisk-1.4.5-3mdk and syslinux-1.76-2mdk and see
the bootdisk creation problem fixed.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Jerome Whelan [EMAIL PROTECTED] writes:
Now if INND would just install and start
Have you tried 2.3.3-1mdk ?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Guillaume Cottenceau [EMAIL PROTECTED] writes:
Reinhard Katzmann [EMAIL PROTECTED] writes:
Hi!
I encountered one problem with postfix: After every
reboot I don't see any other possibility but to set
manually the root alias in the /etc/aliases file
from postfix to my user account
subscribe to
[EMAIL PROTECTED] (see our website).
xxx thanks!
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
the word software because package doesn't
say a thing to beginners.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
=0x50
6 End_Request:I/O error, dev 16:00(HDC), sector (1225708)
And then it just repeats, but the only difference is that the sectors
are different.
Thanks, I'm asking our kernel guys for assistance in interpreting
these errors.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
for I think it should work ok.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Adam Williamson [EMAIL PROTECTED] writes:
On Mon, 2002-09-09 at 10:43, Guillaume Cottenceau wrote:
(13) 3D acceleration: whatever does this refer to?
why would 3.3.6 give 3D, but not 4.2.0, and why is it experimental?
There is no free software 3d acceleration for nvidia in XFree-4
succeeds on the old version
the old version is pre10 instead of pre11
what difference? what are you talking about? the logs you show
are from a successful installation of the tulip driver, I see no
problem. what's your problem? please be descriptive..
--
Guillaume Cottenceau - http
Matias Griese [EMAIL PROTECTED] writes:
On 9 Sep 2002, Guillaume Cottenceau wrote:
thanks, fixed! btw, the finnish i18n needs work, if you want to
volunteer in mdk i18n team you're more than welcome! :-)
I know. For last two years I've tried to maintain the Finnish
translation
[EMAIL PROTECTED] (Robert Fox) writes:
Sorry - report wrong machine on last post - the machine I had prblesm
with has 768Meg of memory
Please test latest upload, it should work now. Problem was that
the debugging symbols were left in the rpmlib, enlarging too much
the rescue.
--
Guillaume
Michael E. Jaggers [EMAIL PROTECTED] writes:
In RC2, the line at the top of the first stage install screen identifies
the build as (cooker). This should be changed to reflect the current
build name.
thanks, fixing.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
drive,
then the installation goes smoothly with Mandrake.
Could anyone explain why it happens that way. Don't
tell me my drive is bad. After installation, I can use
it any way I want.
when you boot with ide=nodma, does it fix anything?
--
Guillaume Cottenceau - http://people.mandrakesoft.com
config scripts in your homedir. Try making a new user and
logging in as that user. I'm willing to be you can't replicate it if
you do that.
Or maybe you have some .rpmnew files lying around.
# rpmdrake --merge-all-rpmnew
may help.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
they be restored to the better old format?
no way.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
software wrongly told me they were installed.
yep.
i succeeded in re-installing the 3 packages using 'rpm -i',
after which they correctly re-appeared in the Remove software listing.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
are very likely to have hardware
failures. Many times with similar bugs we spent time trying to
investigate, just to see that it was only due to h/w failure, so
most of the times we don't bother.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
: mkbootdisk --noprompt --appendargs devfs=mount --device /dev/fd0
2.4.19-9mdk with root /mnt
mke2fs 1.27ea (14-Mar-2002)
* step `createBootdisk' finished
So the step seems OK, according to the logs... making it much
hard to debug!... see my other mail.
--
Guillaume Cottenceau - http
heard mdk policy about software licenses ?
E.g. we don't put non free software on the free software CD's
(3 first CD's, more or less).
BTW, maybe they could be a FAQ automatically sent to people
subscribing cooker ?
There's one (or at least there was one), writtent by glee and me.
--
Guillaume
tarvid [EMAIL PROTECTED] writes:
On Tuesday 10 September 2002 05:58 am, Guillaume Cottenceau wrote:
Jim Tarvid [EMAIL PROTECTED] writes:
On Monday 09 September 2002 05:56 am, you wrote:
Jim Tarvid [EMAIL PROTECTED] writes:
A network.img from cooker 2002-05-09 works on a box where
tarvid [EMAIL PROTECTED] writes:
reverse name lookup on DNS failed (this succeeds on the 2002-05-09 cooker
version)
just tested with both DHCP and Static ip attribution, works for
me. are you sure you don't have a problem on your side (dns
server)?
--
Guillaume Cottenceau - http
on the
importance of the bugs found and the quality of our tests.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Philip Webb [EMAIL PROTECTED] writes:
020910 Guillaume Cottenceau wrote:
Philip Webb [EMAIL PROTECTED] writes:
in the old (somewhat defective) Softdrake in Mandrake 8.2
there was a single display which could be switched between 'install-ed/able'.
IMHO it was bad design.
well, that's
for your efforts, it paid off at last.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
professional and have zarro
boogs, but this time because they all fixed them in a minute?
I'm sure all our competitors are like that.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
bugzilla has never quite worked well for us. At least
we're a number of developers who do close our bugs (when bugzilla
decides to work). This ML is a prefered way to report problems
for the cooker version and the installation program, though.
--
Guillaume Cottenceau - http
Philip Webb [EMAIL PROTECTED] writes:
020910 Guillaume Cottenceau wrote:
Felix Miata [EMAIL PROTECTED] writes:
I don't see how you can release a product incapable
of creating a rescue floppy either during or post install.
It's not a rescue floppy, it's a boot floppy. To rescue your
cases and cannot begin to prove it.
ide=nodma may help (slowing down, though).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
.
And for you?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Robert B [EMAIL PROTECTED] writes:
Hi,
When trying to install Mandrake 9.0 RC2 I get an error message during the
installation saying XFree 4.2 can not be installed.
When I switch to the console it says XFree86 is a bad package.
can you attach /root/drakx/report.bug.gz ?
--
Guillaume
kernel problem after my own investigations) but they never fixed
it (probably a mix of don't have enough time and don't care).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
to investigate a bit by yourself, it may help us a
lot
it would be cool also if you searched archives of this list[1] if
your bug is already reported addressed.
thanks!
Ref:
[1] http://marc.theaimsgroup.com/?l=mandrake-cooker
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
(except our broken english of course).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
, cdrom, network
card) please can you test?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
machine.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
the two releases,
the harder for us to let it work :-).
Should I have upgraded from 8.1 to 8.2 and then to 9.0RC1? (I did
have some problems, see previous post)
I think you should upgrade directly from 8.1 to latest.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
from the previous stable version to the
latest cooker/beta/rc, e.g. for currently, from 8.2 to RC2.
Thanks!
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
J.A. Magallon [EMAIL PROTECTED] writes:
On 2002.09.06 Guillaume Cottenceau wrote:
22mdk
- --changelog-first will make the maximum information mode
shows the changelog before the filelist
Isn't more useful to have by default changelog first, and give a
--filelist-first ? I
- it will put report.bug on floppy and this file interests us
you can also get it after the install in /root/drakx/
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
connection to rpmdrake. The rpmlib is
doing all the job of upgrading the packages. Have you tried rpm
in the console?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
known before reporting the Gyach problem 5 times.)
I suppose the following would work:
# cd /contrib/RPMS
# rpm -e `ls | perl -pi -e 's/-[^-]+-[^-]+\.[^\.]+\.rpm$//'`
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Jim Tarvid [EMAIL PROTECTED] writes:
A network.img from cooker 2002-05-09 works on a box where a network.img from
rc2 fails.
Network card is a Netgear LC82C169C
What's the problem? Please report useful information from
consoles #3 and #4.
--
Guillaume Cottenceau - http
details.
Well, it's just that we prefer playing Quake3 than working.
and of course, thanx to all the people who do the work.
Thanks :-).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
installation of software packages.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
- it will put report.bug on floppy and this file interests us
you can also get it after the install in /root/drakx/
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
with the bright idea of
reversing a convention I'd gotten used to over the years? (That
of Yes/Ok being on the left and No/Cancel being on the right.)
I'm curious to learn how this is connected to Cooker?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
you're more than welcome! :-)
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Oden Eriksson [EMAIL PROTECTED] writes:
so what?
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
anyone try to find out :-(
I don't see this as an important bug, moreover. It's eating up a
couple of kilobytes of memory? blaah.. :-)
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Pixel [EMAIL PROTECTED] writes:
if you have usb-ehci in modules.conf, upgrade initscripts, it will fix
pixel means ehci-hcd
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
that rather than installing the rpm's it does this. Let me know if you need
any more info on this and I'll be glad to post anything I find.
In my tests, it did work.. maybe if you could see what's going
on with logs, strace, anything..
--
Guillaume Cottenceau - http://people.mandrakesoft.com
it was not translated as well.
Ok, fixed, thanks.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
my test box
up where my sister is staying once they get the cable
modem installed. It will probably be post-9.0
Well I'd really like to have it fixed for 9.0, but still can't
get any access nowhere in such situation :-(.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
devmode=0664,devgid=43 none /proc/bus/usb
Then, do:
# cat /proc/bus/usb
And check if your USB devices seem to be listed there.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
to /usr/bin/edit-urpm-sources.pl, I think
it's not important enough to make a mess of symlinks only for
that.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
in the future, I think people will
hopefully think twice before raising hell over it.
Well I think it's because I added the features people wanted back
(or discussed why I would not). If it was still like -1mdk people
would still complain loud about it.
--
Guillaume Cottenceau - http
[EMAIL PROTECTED] (Robert Fox) writes:
REPOST - MANY MESSAGES NOT COMING THROUGH!
I've already seen this message, yesterday.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Jerome Whelan [EMAIL PROTECTED] writes:
Sorry for repeat, but I can't find any other info in cooker or Mandrake
expert about INND.
Has anyone tried this?
The server team has this package in the list of its rebuilds.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Victor Pelt [EMAIL PROTECTED] writes:
Not a HASH reference at /usr/lib/libDrakX/ugtk.pm line 506
happens when you upgraded drakconf but not drakxtools
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
J.A. Magallon [EMAIL PROTECTED] writes:
I was about to ask for the same. Nice for unattended installs,
whe you trust your sources...
you might try the -20mdk and yell at me if it doesn't work.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
(=33mdk)
- you should have no more new cores
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
David Walser [EMAIL PROTECTED] writes:
Why not /usr/sbin/rpmdrake-sources? Any good reason
to keep the other name?
I think it's too late to bother with such non-important things
because of programs launching it (drakconf, menus).
--
Guillaume Cottenceau - http://people.mandrakesoft.com
Charles A Edwards [EMAIL PROTECTED] writes:
On 05 Sep 2002 12:30:38 +0200
Guillaume Cottenceau [EMAIL PROTECTED] wrote:
you might try the -20mdk and yell at me if it doesn't work.
I don't like to yell on a list.
Nice of you :-).
In -20 it does not work.
Still get sign verification
to be translated (it's a bit late).
i'll do it after 9.0.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Charles A Edwards [EMAIL PROTECTED] writes:
On a side note the same option does not work with urpmi
urpmi --noverify-rpm
urpmi: unknown option --noverify-rpm, check usage with --help
double check your typing ;p.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
the same as before the install.
Florin, I sort of agree. Our general policy is to have a default
configuration only when it's sensible (e.g. ftp server); the
default configuration is block everything appears not very
sensible to me... But it's up to you, WDYT?
--
Guillaume Cottenceau - http
, of course :-).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Sep 03 2002 Guillaume Cottenceau [EMAIL PROTECTED] 2.0-19mdk
- fix should not report everything installed successfully when not
(please test ;p).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Charles A Edwards [EMAIL PROTECTED] writes:
Would it be possible to have rpmdrake accept and use the
--no-verify-rpm flag when requested by user.
Yes.
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
file, and I didn't get any thing
at the end to look at it... :o(
A pity since as of -19mdk it's colourful :-).
http://people.mandrakesoft.com/~gc/t/rpmdrake2-diff.png
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
.
When I look in /proc/bus, I see no usb (only pci).
Can you run the following commands as root and send the output:
# service usb status
# service usb start
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
901 - 1000 of 3341 matches
Mail list logo
