Re: [Cooker] 7.1 b3 usb zip drive is detected but won't mount

Is this something that setup forgot to do? or why was modules.dep wrong? Tim & Val Litwiller wrote: > Thanks, as you can tell I am still quite new at linux, after depmod -a I did > rmmod ide-scsi and rmmod usb-storage and then modprobe ide-scsi and modprobe > usb-storage and m

Re: [Cooker] 7.1 b3 usb zip drive is detected but won't mount

Thanks, as you can tell I am still quite new at linux, after depmod -a I did rmmod ide-scsi and rmmod usb-storage and then modprobe ide-scsi and modprobe usb-storage and mount /dev/zip /mnt/zip. and it works! Chmouel Boudjnah wrote: > Tim & Val Litwiller <[EMAIL PROTECTED]> wri

Re: [Cooker] 7.1 b3 usb zip drive is detected but won't mount

note also: # ls /dev/zip -all lrwxrwxrwx1 root root4 May 24 03:30 /dev/zip -> sda4 # mount /dev/sda4 /mnt/zip mount: /dev/sda4 is not a valid block device # mount /dev/sda /mnt/zip mount: /dev/sda is not a valid block device Chmouel Boudjnah wrote: > Tim & Val

Re: [Cooker] 7.1 b3 usb zip drive is detected but won't mount

here I try to mount /dev/sda # mount /dev/sda /mnt/zip mount: /dev/sda is not a valid block device Chmouel Boudjnah wrote: > Tim & Val Litwiller <[EMAIL PROTECTED]> writes: > > > here is output from cat /proc/scsi/scsi > > > > Attached devices: > >

Re: [Cooker] 7.1 b3 usb zip drive is detected but won't mount

oh - I just noticed one more thing, when doing a modprobe ide-scsi I get this message # modprobe ide-scsi Note: /etc/conf.modules is more recent than /lib/modules/2.2.15-4mdksmp/modules.dep Chmouel Boudjnah wrote: > Tim & Val Litwiller <[EMAIL PROTECTED]> writes: > >

Re: [Cooker] 7.1 b3 usb zip drive is detected but won't mount

Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 note: this is after I did the modprobe ide-scsi Chmouel Boudjnah wrote: > Tim & Val Litwiller <[EMAIL PROTECTED]> writes: > > > What do I need to check to get my usb zip drive working and

[Cooker] 7.1 b3 usb zip drive is detected but won't mount

I have had 3 successful installs now but on this machine with my sub zip drive I am having a problem The install finds and sets up the usb-scsi drivers, my conf.modules looks like this --- pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start alias net-pf-4 ipx alias scsi_hostadapter ide-scsi al

Re: [Cooker] Bad RPMS on EXT ISO (was RE:Problem with Beta 3 ISO)

So why is your beta 3 iso file different than mine, I have had the best install ever with beta 3. not 1 error all the way thru install, everything works correctly when done. A few small customizations and this install is running better than I have ever seen a Mandrake install before and I have

[Cooker] Beta 3, squid still broken - has been thru all iso's so far

here is the error message when I try to initialize the cache FATAL: getpwnam failed to find userid for effective user 'SQUID' userid in all caps is wrong Squid Cache (Version 2.3.STABLE2): Terminated abnormally. CPU Usage: 0.020 seconds = 0.010 user + 0.010 sys Maximum Resident Size:

Re: [Cooker] Idea for new utility

I think a utility that would ./configure , make , build rpm, install rpm, is what is needed, that way you can more easily uninstall the program and check dependencies of other programs that might need this program. Serge Lussier wrote: > - Original Message - > From: Geoffrey Lee <[EM

[Cooker] 7.1b No telnet, ftp, or web server running

Tim & Val Litwiller wrote: > I have been using Mandrake since version 5.3 and 7.1 is the first that I > have seen that has none of > these services running, I made sure to choose expert and server on > four installs now and they are all the same. > > What good is a

[Cooker] hydrogen - squid not working correctly in mandrake 7.1beta

has an error about the error file missing, then I did a touch for the file that it asked for after that it says the there is no host name so i put the host name in the squid.conf file - never had to do that before , after that I quit getting error messages but squid runs less that 3 seconds before

Re: [Cooker] Rescue ISO?

if you have problems with long line in pico use pico -w to turn of automatic word wrap. I think pico is the perfect quick editor, but I would hate to use it to write a whole web site or some such project. David Hedbor wrote: > "geoffrey lee" <[EMAIL PROTECTED]> writes: > > > E...!! emacs!!

Re: [Cooker] Major Problem

I have to do this also, try this while booting your computer, at the lilo prompt type inlinux mem=128M and then see if all your memory is recognized, if it is then you will want to use your favorite editor to edit lilo.conf and add a line like this append="mem=128M" if you already had an a

Re: [Cooker] Problems with Scsi-Emulation (Air)

so if I just blew up my scd0 by using your command line below instead of checking to make sure that it was correct " it should have been ln -fs scd0 cdrom2" how do I get back my scd0? "Guy T. Rice" wrote: > Silvio Mazzaro wrote: > > > > Il lun, 24 gen 2000, webmedic ha scritto: > > > Actual

[Cooker] [Fwd: no network after install finishes]

Since I never did see this message on the list I am resending it. Tim & Val Litwiller wrote: > I have gone thru the install 3 times now. > > I would call it a mostly flawless install process, except after install > I have no network access. I must be doing something wrong. >

Re: [Cooker] More comments on Oxygen-3

AMD has admitted that the Athlon doesn't work well with AGP video cards. psycho wrote: > how about geForce - detect ? new athlon box here . > > Patrick Goetz wrote: > > > I just finished installing Beta-3. 3 immediate comments: > > > > 1. I noticed that amd was installed by default (as evidence

Re: [Cooker] Is there an ISO for cooker?

I have one I made yesterday - missing locales and emacs to fit on a 74min cd. I can turn on ftp if you really need it. Hoyt wrote: > Is there an iso9660 Cd image for a current cooker? > > Hoyt

Re: [Cooker] gi_network ftp install problem

so... do I need to download the gi_bootnet.img again or just reboot with this one and it will pull the fixed file as it needs it? Pixel wrote: > Timothy Litwiller <[EMAIL PROTECTED]> writes: > > > I am trying to do an ftp install from sunsite.uio.no > > > > > > I get an error after choosing

Re: [Cooker] CD-Burning

I took out the man-* files that had other localisations that I did not need. tracer wrote: > Sunday, November 07, 1999 > > Hello Sergio, > > Sunday, Sunday, November 07, 1999, you wrote: > > Sergio> Can someone who already has burned iso images help me decipher this > Sergio> information > Sergi

Re: [Cooker] xdrake install

now that I look mine has a 2.3 kernel also. Terrapin wrote: > On Sat, 23 Oct 1999, you wrote: > > ok, remirrored it Fri. to take home this weekend. got thru the install proccess >just fine. on reboot got > > lots of scrolling interspersed with numbers and x did not start so I went to >a

Re: [Cooker] xdrake install

ok, remirrored it Fri. to take home this weekend. got thru the install proccess just fine. on reboot got lots of scrolling interspersed with numbers and x did not start so I went to alt-f2 had same screen full of garbage but when I hit enter it went away and let me log in. I ran setup and

[Cooker] /dev/hde problems again

well it worked for about a week and now quit working again I am using a promise ide-max2 card to add aditional ide devices to my computer. The first 2 ide channels are full, so in an attempt to make it easy to upgrade I added this card to my machine when I needed more space. I have a cd-rw attac

Re: [Cooker] DrakX Install Problems

I could help with the html if you need more help Pixel wrote: > "Thomas M. Beaudry" <[EMAIL PROTECTED]> writes: > > > Just finished getting the latest of everything. Went to do a full install. > > DrakX is EXTREMELY slow switching screens. Like it takes thirty seconds > > after clicking OK bef