I meant my RPMs that I uploaded to usual place; I updated them a bit
since then.
please get a look.
-Original Message-
>
> Andrey Borzenkov <[EMAIL PROTECTED]> writes:
>
> > > (should module-init-tools not BuildRequire glibc-static-devel ?)
> >
> > yes it should. But because I build i
On Tue, 19 Aug 2003 02:10, Andrey Borzenkov wrote:
> [...]
>
> > It doesn't load 8139too, and maybe cause of that I have completely
> > empy routing-table when I do netstat -rn not even localhost seen?
> > Usually I see three or four entries in netstat -rn.
> > I also see following:
> > "error, som
Andrey Borzenkov <[EMAIL PROTECTED]> writes:
> > (should module-init-tools not BuildRequire glibc-static-devel ?)
>
> yes it should. But because I build it on 9.1 and 9.1 does not have
> glibc-static-devel I was a bit selfish and put something that
> applies to both.
>
> I guess doing urpmi modu
/It seems this one have been squished by cooker, I resent, sorry if you
get it twice./
Andrey Borzenkov a écrit :
On Thursday 14 August 2003 14:10, Fabien ILLIDE wrote:
Andrey Borzenkov a écrit :
Andrey Borzenkov a écrit :
On Wednesday 13 August 2003 20:11, Fabien ILLIDE wrote:
[...]
Advanced
Andrey Borzenkov a écrit :
On Thursday 14 August 2003 14:10, Fabien ILLIDE wrote:
Andrey Borzenkov a écrit :
Andrey Borzenkov a écrit :
On Wednesday 13 August 2003 20:11, Fabien ILLIDE wrote:
[...]
Advanced Linux Sound Architecture Driver Version 0.9.6 (Mon Jul 28
11:08:42 2003 UTC).
ALSA devic
[...]
>
> It doesn't load 8139too, and maybe cause of that I have completely
> empy routing-table when I do netstat -rn not even localhost seen?
> Usually I see three or four entries in netstat -rn.
> I also see following:
> "error, some other host already uses address 127.0.0.1"
> loopback arpi
Mon 18. Aug 2003 15:56, Andrey Borzenkov wrote:
> -Original Message-
>
> > Mon 18. Aug 2003 14:26, Andrey Borzenkov wrote:
> > > please Cc me I do not receive cooker.
> > >
> > > >8139too for the card rtl-8139c
> > > >
> > > >> > I have generated
> > > >> >
> > > >> > modprobe.conf in /etc
-Original Message-
>
> Mon 18. Aug 2003 14:26, Andrey Borzenkov wrote:
> > please Cc me I do not receive cooker.
> >
> > >8139too for the card rtl-8139c
> > >
> > >> > I have generated
> > >> >
> > >> > modprobe.conf in /etc and I have aliases there but no help.
> > >>
> > >> well you d
Mon 18. Aug 2003 14:26, Andrey Borzenkov wrote:
> please Cc me I do not receive cooker.
>
> >8139too for the card rtl-8139c
> >
> >> > I have generated
> >> >
> >> > modprobe.conf in /etc and I have aliases there but no help.
> >>
> >> well you do not tell which modules do not load nor what is in
>
please Cc me I do not receive cooker.
>8139too for the card rtl-8139c
>
>> > I have generated
>>
>> > modprobe.conf in /etc and I have aliases there but no help.
>>
>> well you do not tell which modules do not load nor what is in
>> modprobe.conf ... hard to help.
>>
> There is alias for that modu
Mon 18. Aug 2003 12:19, Andrey Borzenkov wrote:
> > But installing module-init-tools-0.9.13-1bor.src.rpm didn't help.
> > Kernel-2.6 still doesn't load modules I need.
>
> ... which (modules) are ... ?
>
8139too for the card rtl-8139c
> > I have generated
>
> > modprobe.conf in /etc and I have al
> But installing module-init-tools-0.9.13-1bor.src.rpm didn't help.
> Kernel-2.6 still doesn't load modules I need.
... which (modules) are ... ?
I have generated
> modprobe.conf in /etc and I have aliases there but no help.
well you do not tell which modules
17. Aug 2003 13:53, Buchan Milne wrote:
> On Sun, 17 Aug 2003, stronne wrote:
> > Sun 17. Elokuuta 2003 00:55, Adam Williamson wrote:
> > > On Sat, 2003-08-16 at 19:15, stronne wrote:
> > > > I tried to install module-init-tools-0.9.13-1bor.src.rpm
> > > > with # rpm --rebuild
> > > > It said it n
> (should module-init-tools not BuildRequire glibc-static-devel ?)
yes it should. But because I build it on 9.1 and 9.1 does not have
glibc-static-devel I was a bit selfish and put something that applies to
both.
I guess doing urpmi module-init-tools-XXX.src.rpm should pull in that as well,
bu
On Sun, 17 Aug 2003, stronne wrote:
> Viestissä Sunnuntai 17. Elokuuta 2003 00:55, Adam Williamson kirjoitti:
> > On Sat, 2003-08-16 at 19:15, stronne wrote:
> > >
> > > I tried to install module-init-tools-0.9.13-1bor.src.rpm
> > > with # rpm --rebuild
> > > It said it needs /usr/lib/libc.a
> > >
Viestissä Sunnuntai 17. Elokuuta 2003 00:55, Adam Williamson kirjoitti:
> On Sat, 2003-08-16 at 19:15, stronne wrote:
> > 13. Aug 2003 17:22, Andrey Borzenkov wrote:
> > > Argh ...
> > >
> > > please, install module-init-tools and hotplug from
> > >
> > > http://supermount-ng.sf.net/mdk-25/
> > >
On Sat, 2003-08-16 at 19:15, stronne wrote:
> 13. Aug 2003 17:22, Andrey Borzenkov wrote:
> >
> > Argh ...
> >
> > please, install module-init-tools and hotplug from
> >
> > http://supermount-ng.sf.net/mdk-25/
> >
> > (they are SRPM you will have to compile them) then do
> >
> I tried to install m
13. Aug 2003 17:22, Andrey Borzenkov wrote:
>
> Argh ...
>
> please, install module-init-tools and hotplug from
>
> http://supermount-ng.sf.net/mdk-25/
>
> (they are SRPM you will have to compile them) then do
>
I tried to install module-init-tools-0.9.13-1bor.src.rpm
with # rpm --rebuild
It said
> For me, I must modprobe the 3C59x module, and ALSA seems to have worries,
> but it works ! ;o)
What is in your modprobe.conf?
What version of module-init-tools do you have?
What problems do you have with ALSA (because I do not)
do you compile your kernel or install binary form cooker?
thank
stronne a écrit :
Hi,
I downloaded and installed kernel-2.6.0-0.test2.2mdk-1-1mdk.i586.rpm.
It will boot but I don't see any console text?
Try vga=ask in lilo.conf, and choose a low resolution (framebuffer
problem, with my Radeon M6 and seems NVidia also)
For me, I must modprobe the 3C59x module
Hi,
I downloaded and installed kernel-2.6.0-0.test2.2mdk-1-1mdk.i586.rpm.
It will boot but I don't see any console text?
Kde comes up but mice don't work (usb and ps2)?
Any tips appreciated greatly :)
Where I could find mdk specified docs for 2.6?
Greetings
Stronne
On Wednesday 13 August 2003 19:27, Adam Williamson wrote:
[...]
Anyway, I have similar
> problems to the other guy, on my laptop. Lots of stuff that should start
> during boot doesn't, including usb, pcmcia and ALSA. I get no USB stuff
> of any desc
Andrey Borzenkov a écrit :
For me, I must modprobe the 3C59x module, and ALSA seems to have worries,
but it works ! ;o)
What is in your modprobe.conf?
Well, I never touch it, there's :
include /lib/module-init-tools/modprobe.default
include /lib/module-init-tools/modprobe.compat
uncommented line
On Wednesday 13 August 2003 20:11, Fabien ILLIDE wrote:
[...]
> >
> > can you quote exact message?
>
> Here it is :
> Advanced Linux Sound Architecture Driver Version 0.9.6 (Mon Jul 28
> 11:08:42 2003 UTC).
> ALSA device list:
> No soundcards found
>
and what is now in modprobe.conf?
> >>then whe
On Wednesday 13 August 2003 19:27, Adam Williamson wrote:
[...]
>
> Hey Andrey...I'm using my laptop as a 2.6 test station now, since 2.6
> actually seems to work well on that, once I have it set up. It seems
> unstable on my desktop, something to do with disk transfers - any kind
> of heavy disk a
> >>For me, I must modprobe the 3C59x module, and ALSA seems to have worries,
> >>but it works ! ;o)
> >
> >
> > What is in your modprobe.conf?
>
> Well, I never touch it, there's :
> include /lib/module-init-tools/modprobe.default
> include /lib/module-init-tools/modprobe.compat
>
> uncomme
On Wed, 2003-08-13 at 15:22, =?koi8-r?Q?=22?=Andrey
Borzenkov=?koi8-r?Q?=22=20?= wrote:
> > >>For me, I must modprobe the 3C59x module, and ALSA seems to have worries,
> > >>but it works ! ;o)
> > >
> > >
> > > What is in your modprobe.conf?
> >
> > Well, I never touch it, there's :
> > include
Andrey Borzenkov a écrit :
For me, I must modprobe the 3C59x module, and ALSA seems to have worries,
but it works ! ;o)
What is in your modprobe.conf?
Well, I never touch it, there's :
include /lib/module-init-tools/modprobe.default
include /lib/module-init-tools/modprobe.compat
uncommented lines
> Andrey Borzenkov a Иcrit :
> > On Wednesday 13 August 2003 20:11, Fabien ILLIDE wrote:
> > [...]
> >
> >>>can you quote exact message?
> >>
> >>Here it is :
> >>Advanced Linux Sound Architecture Driver Version 0.9.6 (Mon Jul 28
> >>11:08:42 2003 UTC).
> >>ALSA device list:
> >>No soundcards fo
Andrey Borzenkov a écrit :
Andrey Borzenkov a écrit :
On Wednesday 13 August 2003 20:11, Fabien ILLIDE wrote:
[...]
Just about modprobe.conf : do you also have a line similar to
remove snd-intel8x0 { /sbin/modprobe -r snd-pcm-oss; }; /sbin/modprobe -r
--ignore-remove snd-intel8x0
at end of file
Tuesday 12. 8. 2003 20:16, Adam Williamson wrote:
> On Tue, 2003-08-12 at 17:17, stronne wrote:
> > Hi,
> >
> > I downloaded and installed kernel-2.6.0-0.test2.2mdk-1-1mdk.i586.rpm.
> > It will boot but I don't see any console text?
> > Kde comes up but mice don't work (usb and ps2)?
> > Any tips a
On Wed, 2003-08-13 at 08:35, stronne wrote:
> Thank you, now I can see console text :)
> Where I could find .test3, I looked from cooker contrib
> but found only this test2.2?
Look again :). Packages move fast in Cooker.
> Does .test3 support supermount?
Erm, I haven't actually tried. Couldn't
Andrey Borzenkov a écrit :
For me, I must modprobe the 3C59x module, and ALSA seems to have worries,
but it works ! ;o)
What is in your modprobe.conf?
Well, I never touch it, there's :
include /lib/module-init-tools/modprobe.default
include /lib/module-init-tools/modprobe.compat
uncommented lin
On Thursday 14 August 2003 14:10, Fabien ILLIDE wrote:
> Andrey Borzenkov a écrit :
> >>Andrey Borzenkov a écrit :
> >>>On Wednesday 13 August 2003 20:11, Fabien ILLIDE wrote:
> >>>[...]
>
> Just about modprobe.conf : do you also have a line similar to
> remove snd-intel8x0 { /sbin/modprobe -r snd-
Andrey Borzenkov a écrit :
On Wednesday 13 August 2003 20:11, Fabien ILLIDE wrote:
[...]
can you quote exact message?
Here it is :
Advanced Linux Sound Architecture Driver Version 0.9.6 (Mon Jul 28
11:08:42 2003 UTC).
ALSA device list:
No soundcards found
and what is now in modprobe.conf?
Here's th
On Wed, 2003-08-13 at 21:01, Andrey Borzenkov wrote:
> I had the same behaviour with the previous
> > modprobe.conf , which was generated by
> > module-init-tools-0.9.13-0.pre.0.3bor on installation, and looked much
> > the same except without the huge string of alias'es at the top.
>
> and USB d
On Tue, 2003-08-12 at 17:17, stronne wrote:
> Hi,
>
> I downloaded and installed kernel-2.6.0-0.test2.2mdk-1-1mdk.i586.rpm.
> It will boot but I don't see any console text?
> Kde comes up but mice don't work (usb and ps2)?
> Any tips appreciated greatly :)
> Where I could find mdk specified docs f
37 matches
Mail list logo