Hello,
I had to modify my network profile because I was unable to login for unknown
reasons (the network interface was set to eth1, instead of eth0 and my login
and password were also lost).. Anyway, so I used draknet to correct those
settings. Now I am wondering why draknet modifes the proxy
On Wed, 5 Sep 2001, Mordechai Ovits wrote:
Does draknet currently support dynamical ip-addresses and nameserver ??
How would be a selectbox for that in draknet?
Instead of only asking for Nameserver 1 and 2 ...!
leave the nameserver entries blank, and it will use dynamic
Hi !
Does draknet currently support dynamical ip-addresses and nameserver ??
How would be a selectbox for that in draknet?
Instead of only asking for Nameserver 1 and 2 ...!
mfg dominik
--
Backups are for wimps. Real men upload their data to an FTP site and have
everyone else mirror it.
[EMAIL PROTECTED] (Dominik Bittl) writes:
Hi !
Does draknet currently support dynamical ip-addresses and nameserver ??
How would be a selectbox for that in draknet?
Instead of only asking for Nameserver 1 and 2 ...!
leave the nameserver entries blank, and it will use dynamic nameservers.
On Wednesday 05 September 2001 01:14, dam's wrote:
[EMAIL PROTECTED] (Dominik Bittl) writes:
Hi !
Does draknet currently support dynamical ip-addresses and nameserver ??
How would be a selectbox for that in draknet?
Instead of only asking for Nameserver 1 and 2 ...!
leave the
Mordechai Ovits [EMAIL PROTECTED] writes:
On Wednesday 05 September 2001 01:14, dam's wrote:
[EMAIL PROTECTED] (Dominik Bittl) writes:
Hi !
Does draknet currently support dynamical ip-addresses and nameserver ??
How would be a selectbox for that in draknet?
Instead of only
[EMAIL PROTECTED] (Kees de Bruin) writes:
Hi,
I've installed the latest MandrakeFreq on my new box and had no problems
what so ever during the install. However, when I setup my ADSL internet
connection DrakNet asks me if I want to start the connection at boot time,
and although I
Mailing List [EMAIL PROTECTED]
Sent: Tuesday, July 03, 2001 1:35 AM
Subject: [Cooker] Draknet and ADSL
Hi,
I've installed the latest MandrakeFreq on my new box and had no problems
what so ever during the install. However, when I setup my ADSL internet
connection DrakNet asks me if I want
]
Sent: Tuesday, July 03, 2001 1:35 AM
Subject: [Cooker] Draknet and ADSL
Hi,
I've installed the latest MandrakeFreq on my new box and had no problems
what so ever during the install. However, when I setup my ADSL internet
connection DrakNet asks me if I want to start the connection
Hi,
I've installed the latest MandrakeFreq on my new box and had no problems
what so ever during the install. However, when I setup my ADSL internet
connection DrakNet asks me if I want to start the connection at boot time,
and although I responded with yes nothing is started when I boot the PC.
[EMAIL PROTECTED] (Mattias Dahlberg) writes:
Hi!
Draknet has the same problem in Mdk8 that I reported during the beta testing:
Using the Configure LAN that appears after clicking on Expert Mode doesn't
configure eth0, eventhough it says it will.
strange, I can't reproduce
(I use this
Hi!
Draknet has the same problem in Mdk8 that I reported during the beta testing:
Using the Configure LAN that appears after clicking on Expert Mode doesn't
configure eth0, eventhough it says it will.
(I use this way to configure my LAN, 'cause it seems like the most logical way
to keep my
[EMAIL PROTECTED] (Mattias Dahlberg) writes:
I'm trying to accomplish the simple task of configuring eth0 using DrakConf in
RC1. I doesn't work.
First let me say this: Hiding "Configure Internet Access" and "Configure Local
Network" buttons behind the "Expert Mode" title actually makes
I'm trying to accomplish the simple task of configuring eth0 using DrakConf in
RC1. I doesn't work.
First let me say this: Hiding "Configure Internet Access" and "Configure Local
Network" buttons behind the "Expert Mode" title actually makes draknet harder
to understand for a new user and/or
Hi,
In 7.2 at the time of the installation my Token-Ring card ( olympic.o) is
well recognized, but since the 8.0 the Token-Ring cards are not recognized
during the installation and not exit in Draknet.
Can you add the Token-Ring modules in the installation and Draknet.
Vincent GUARDIOLA
[EMAIL PROTECTED] writes:
Hi,
In 7.2 at the time of the installation my Token-Ring card ( olympic.o) is
well recognized, but since the 8.0 the Token-Ring cards are not recognized
during the installation and not exit in Draknet.
Can you add the Token-Ring modules in the installation and
[EMAIL PROTECTED] (Con Kolivas) writes:
The draknet wizard seems to be working quite well now. The only
no, you're probably kidding huh? draknet is for now still very crappy.
problem I have is that I can only configure my cable modem
connection via the "Lan configuration" option rather
[EMAIL PROTECTED] ("Sergio P.Korlowsky") writes:
On Saturday 17 March 2001 08:48, you wrote:
The draknet wizard seems to be working quite well now. The only
problem I have is that I can only configure my cable modem
connection via the "Lan configuration" option rather than "cable". I
Original message from: "dam's" [EMAIL PROTECTED]
The draknet wizard seems to be working quite well now. The only
no, you're probably kidding huh? draknet is for now still very
crappy.
ROFLMHO - no it actually worked a little bit is what I meant. It's all
relative ;-)
problem I have is that
Thanks,
Oh By the way, I cannot find a tool that allows me to switch between one and
two channel ISDN. Is there anything im missing?
Dave
On Friday 16 March 2001 22:23, you wrote:
[EMAIL PROTECTED] (Armisis Aieoln) writes:
Yes sorry
Dave
On Wednesday 14 March 2001 17:25, you wrote:
The draknet wizard seems to be working quite well now. The only
problem I have is that I can only configure my cable modem
connection via the "Lan configuration" option rather than "cable". I
realise there is virtually no difference but I cannot proceed by
clicking on cable. Also it continues
On Saturday 17 March 2001 08:48, you wrote:
The draknet wizard seems to be working quite well now. The only
problem I have is that I can only configure my cable modem
connection via the "Lan configuration" option rather than "cable". I
realise there is virtually no difference but I cannot
Only one channel works in it for some reason, and in order to get that to work
this sounds weird but i have to dial up with kppp on my modem, at the same
time use qtisdn to dial into my isdn isp then disconnect my modem.
I dont get it but it works when i do that and dosent when i do not.
[EMAIL PROTECTED] (Armisis Aieoln) writes:
Yes sorry
Dave
On Wednesday 14 March 2001 17:25, you wrote:
[EMAIL PROTECTED] (Armisis Aieoln) writes:
Looking good so far, just a seg fault after i enter in my isp's info as
soon as i click ok.
in console mode?
ok, I'll look at it
Looking good so far, just a seg fault after i enter in my isp's info as soon
as i click ok.
dave
[EMAIL PROTECTED] (Armisis Aieoln) writes:
Looking good so far, just a seg fault after i enter in my isp's info as soon
as i click ok.
in console mode?
--
dam's
Yes sorry
Dave
On Wednesday 14 March 2001 17:25, you wrote:
[EMAIL PROTECTED] (Armisis Aieoln) writes:
Looking good so far, just a seg fault after i enter in my isp's info as
soon as i click ok.
in console mode?
[EMAIL PROTECTED] (Armisis Aieoln) writes:
Anyword on how draknet is comming along with its fixes?
Im just constantly downloading cooker in hopes of something GRIN
expecialy isdn fix and setup option for CHAP login varification.
I'm working on it.
--
dam's
Thanks alot, Ill be the first to try it out when your ready GRIN thanks
much! and keep up the briliant work!!!
Dave
On Monday 05 March 2001 15:59, you wrote:
[EMAIL PROTECTED] (Armisis Aieoln) writes:
Anyword on how draknet is comming along with its fixes?
Im just
Anyword on how draknet is comming along with its fixes?
Im just constantly downloading cooker in hopes of something GRIN
expecialy isdn fix and setup option for CHAP login varification.
thanx much
Dave
[EMAIL PROTECTED] ("Andrej Borsenkow") writes:
draknet fills chap-secret and pap-secret. With kppp and kisdn you can choose
the way to connect. So you want draknet to be able to connect using both way
isn't it?
I cannot make draknet work in curent cooker, so I can speak only about
On Sat, 24 Feb 2001, Armisis Aieoln wrote:
I have no documentation thats in english the kisdn program is all in german.
but thats what i use anyway for now "kisdn"
dave
On Friday 23 February 2001 16:30, you wrote:
[EMAIL PROTECTED] ("Andrej Borsenkow") writes:
The Draknet isdn
[EMAIL PROTECTED] (Andrej Borsenkow) writes:
On Sat, 24 Feb 2001, Armisis Aieoln wrote:
I have no documentation thats in english the kisdn program is all in german.
but thats what i use anyway for now "kisdn"
dave
On Friday 23 February 2001 16:30, you wrote:
[EMAIL
draknet for modem and isdn is dead, i had to send this from a friends
computer... awaiting a fix thanks
dave
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
draknet fills chap-secret and pap-secret. With kppp and kisdn you can choose
the way to connect. So you want draknet to be able to connect using both way
isn't it?
I cannot make draknet work in curent cooker, so I can speak only about stock
7.2. There I did not have any option to select
I have no documentation thats in english the kisdn program is all in german.
but thats what i use anyway for now "kisdn"
dave
On Friday 23 February 2001 16:30, you wrote:
[EMAIL PROTECTED] ("Andrej Borsenkow") writes:
The Draknet isdn setup needs to offer CHAP login please.
mater of
[EMAIL PROTECTED] ("Andrej Borsenkow") writes:
The Draknet isdn setup needs to offer CHAP login please.
mater of fact any of the dial up tools needs to have chap as an option.
I second that. Actually, there were already several requests/bug reports in
the past several months ...
The Draknet isdn setup needs to offer CHAP login please.
mater of fact any of the dial up tools needs to have chap as an option.
Dave
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Linux - Cause I dont do windows
or ovens!
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
The Draknet isdn setup needs to offer CHAP login please.
mater of fact any of the dial up tools needs to have chap as an option.
I second that. Actually, there were already several requests/bug reports in
the past several months ...
39 matches
Mail list logo
