On Thu, 18 Sep 2003 14:33:43 +0200
Dave Cotton <[EMAIL PROTECTED]> wrote:
> According to the mirrors I've tried sane-backends and libraries are at
> 1.0.12-3mdk and sane-frontends is at 1.0.11-1mdk, neither kooka nor
> xsane allow me to scan.
Could you file a bugreport on bugzilla?
Make sure to h
According to the mirrors I've tried sane-backends and libraries are at
1.0.12-3mdk and sane-frontends is at 1.0.11-1mdk, neither kooka nor
xsane allow me to scan.
--
Dave Cotton <[EMAIL PROTECTED]>
On Sun, 19 Jan 2003 17:57:17 +0100
Till Kamppeter <[EMAIL PROTECTED]> wrote:
> Thank you very much for the contribution, I have put the new SANE onto
> the Cooker now.
Thank you :-)
> Things which need still to be done to setup networked scanning with the
> saned package:
>
> On the server(s)
Hello,
I have made a new release for the sane rpm, which has some preconfiguring for
saned.
I changed the package descriptions a bit now that saned has its own package.
I will upload it to /incoming, and it's also available at:
http://www.chaosmongers.org/download/Mandrake/SRPMS/sane-1.0.9-4mdk.s
I have the same in hp.conf
the error I get from scannerdrake is:
TODO: XSetInputFocus if force_focus
TODO: ensure focus stuff
Use of uninitialized value in split at
/usr/lib/perl5/vendor_perl/5.8.0/MDK/Common/String.pm line 138
(#1)
Use of uninitialized value in numeric eq (==) at
On Sun, 5 Jan 2003, Magnus Holmberg wrote:
> Harddrake craches when I run it. also scannerdrake craches.
>
> yes cdrecord -scanbus list the scanner. It works if I send it as an
> parameter to scanimage or xsane.. the problem was that when I use gimp
> I can not send the scanner as a parameter.
Harddrake craches when I run it. also scannerdrake craches.
yes cdrecord -scanbus list the scanner. It works if I send it as an
parameter to scanimage or xsane.. the problem was that when I use gimp
I can not send the scanner as a parameter.
adding hp to dll.conf helped me out... But harddra
I have a
ScanJet IIcx C2500A 3332 SCSI
scanner.
It worked just fine with Mandrake 8.2
if I do a sane-findscaner it says:
found SCSI processor "HP C2500A 3332" at /dev/scanner
found SCSI processor "HP C2500A 3332" at /dev/sg0
but if I try to run xsane or scanimage -L
it says that i
I have a ScanJet 4200C.
When I choose Scanner in the Mandrake Controle Center, it says:
Found scanjet 4200C shall I configure it?
I click yes.
It says: your scanner i configured use xsane under .. to scan.
But when I try to scan I get an error box that says "No device found".
1. Is the scanner
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
kim marshall wrote:
| Buchan Milne wrote:
|
|> On Sat, 24 Aug 2002, kim marshall wrote:
|>
|>> I wish it were so but I have copied the umax.conf from my old mdk8.2
|>> /etc/sane.d directory and I still get the very same
|>> thing. Even rebooted just
Buchan Milne wrote:
> On Sat, 24 Aug 2002, kim marshall wrote:
>
>>I wish it were so but I have copied the umax.conf from my old mdk8.2 /etc/sane.d
>directory and I still get the very same
>>thing. Even rebooted just in case that mattered but no difference.
>>
>>Igo Izyumin asked for a copy of
On Sat, 24 Aug 2002, kim marshall wrote:
> I wish it were so but I have copied the umax.conf from my old mdk8.2 /etc/sane.d
>directory and I still get the very same
> thing. Even rebooted just in case that mattered but no difference.
>
> Igo Izyumin asked for a copy of the following and I sent i
When I use xsane by calling it from the gimp, it fails to transfer the
image and complaints about not being able to create secure file out.png.
When I use xsane standalone, it works well.
I would debug this one, but since it is almost 5:00AM here and I have to
work tomorrow ...
--
Eugenio Di
Eugenio Diaz <[EMAIL PROTECTED]> writes:
> [root@fulgore:/home/linux/mandrake-devel/cooker/cooker/Mandrake/RPMS]# rpm
> -Fvh libsane1-* sane-*
> error: failed dependencies:
> sane = 1.0.7 is needed by sane-frontends-1.0.7-3mdk
heum ?
seems i forget to upload it..
i sux big times..
so sorry
-
[root@fulgore:/home/linux/mandrake-devel/cooker/cooker/Mandrake/RPMS]#
rpm -Fvh libsane1-* sane-*
error: failed dependencies:
sane = 1.0.7 is needed by sane-frontends-1.0.7-3mdk
[root@fulgore:/home/linux/mandrake-devel/cooker/cooker/Mandrake/RPMS]#
ls -l *sane*
-rw-r--r--1 1137 1100
Hi!
rpm -Uvh sane-frontends-1.0.7-1mdk:
ln: creating symbolic link `/usr/lib/gimp/1.1/plug-ins/xscanimage' to
`/usr/bin/xscanimage': No such file or directory
ln: creating symbolic link `/usr/lib/gimp/1.2/plug-ins/xscanimage' to
`/usr/bin/xscanimage': No such file or directory
error: execution
On Fri, Oct 19, 2001 at 02:08:01PM +0200, Yves Duret wrote:
> strange.. cause all the field are fill (if one one the field like manufacter
> or type or.. is empty, sane-find-scanner wont found any scaner. "feature" known..)
> was your scanner turn on before you start your computer ?
Yes but in t
Stefan Hußfeldt <[EMAIL PROTECTED]> writes:
> Hello,
>
> after updating from an older cooker to todays version
> sane-find-scanner doesn't find the scanner. Any hints?
[...]
> libsane1-1.0.5-3mdk
> |NVIDIA_kernel-1.0-1541
> sane-backends-1.0.5-3mdk
> xsane-0.80-1mdk
> xsane-gimp-0.80-1mdk
st
Hello,
after updating from an older cooker to todays version
sane-find-scanner doesn't find the scanner. Any hints?
[root@kilroy root]# sane-find-scanner -v
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus and some scanners that are connected to the Universa
I have a Mustek 600 III Plus parallel port scanner. got all the new sane
rpms from cooker-- does not work. cannot find my device, even after
i restart. it says: no device found. I installed a driver that someone
on cooker said helped their parport scanner work, but after i installed
that package
On 02 Aug 2001 21:03:05 +0200
Yves Duret <[EMAIL PROTECTED]> wrote:
> Grégoire Colbert <[EMAIL PROTECTED]> writes:
> > I haven't sent anything to this list since a very long time, so I
hope I'm not
> > bothering anyone with this question : is there a chance to get an
easy
> > installation of scan
Hi!
Well I think the task of building scripts to automatize the
configuration of scanners would be quite time-consuming, but I tried to
configure my Plustek parallel scanner yesterday and it failed for some
prehistoric reason ("depmod -a" returned with an error and since it was
late, I stoppe
Would be better if "sane-find-scanner" created this link, that way
if a scanner is added after the install, it is still taken care of.
V
Claudio wrote:
>
> Lately I said that Mustek ScanExpress 12000 didn't work, even if recognized
> by kernel. Now it works again, and I have to say sorry for my
Lately I said that Mustek ScanExpress 12000 didn't work, even if recognized
by kernel. Now it works again, and I have to say sorry for my stupidity. The
fact is that with "sane-find-scanner" I could see the scanner, but "scanimage
-L" (or xsane) didn't see it. Well, I only had to "ln -s /dev/sg
On Fri, Jun 08, 2001 at 03:48:25PM -0100, Claudio wrote:
> Since last sane (that one included with 8.0) does NOT work with mustek and HP
> scanners, is it possible to have a 1.0.5-pre for testing?
> Thanks, C.
worksforme (c) with a HP scanjet 6300 usb.
could you be more precise on the pb ?
ther
Claudio wrote:
>Since last sane (that one included with 8.0) does NOT work with mustek and HP
>scanners, is it possible to have a 1.0.5-pre for testing?
>Thanks, C.
>
Ich glaube, es fixed a prob with HPOJPRO1150C.
Since last sane (that one included with 8.0) does NOT work with mustek and HP
scanners, is it possible to have a 1.0.5-pre for testing?
Thanks, C.
--
Claudio Panichi
SysAdmin at Dept. of Physics
"Tor Vergata" University and INFN - Rome
Remote System is: LINUX!
Hi all,
I've already reported that sane won't work with mustek scanner in actual
8.0pre.
Is it possible to recompile from cvs if someone have access to it?
Claudio
--
Nothing's as simple as it seems...
[root@monster root]# echo "hello world"
[root@monster root]# Segmentation fault (cor
[claudio@monster claudio]$ scanimage -L
device `v4l:/dev/video0' is a V4L BT878(Hauppauge new (bt878)) virtual device
device `v4l:/dev/bttv0' is a V4L BT878(Hauppauge new (bt878)) virtual device
device `mustek:/dev/sgc' is a Mustek ScanExpress 12000SP Plus flatbed scanner
but when I start xsane o
On Sunday 01 April 2001 22:16, you wrote:
> On Sun, Apr 01, 2001 at 07:47:57PM +0200, Claudio wrote:
> > Won't work with my scanner: Mustek 12000 SP plus (scsi, attached on
> > aha-2904) It worked with LM-7.1 and 7.2
> >
> > Claudio
> > --
> > System: Linux Mandrake (8.0-beta 26/03/2001 insta
> Won't work with my scanner: Mustek 12000 SP plus (scsi, attached on aha-2904)
> It worked with LM-7.1 and 7.2
I reported the same problem, the latest SANE version from cvs fixes it.
Replacing only the libmustek files is enough but strangely recompiling
the SRPM with the latest mustek backend f
On Sun, Apr 01, 2001 at 07:47:57PM +0200, Claudio wrote:
> Won't work with my scanner: Mustek 12000 SP plus (scsi, attached on aha-2904)
> It worked with LM-7.1 and 7.2
>
> Claudio
> --
> System: Linux Mandrake (8.0-beta 26/03/2001 install)
> Kernel 2.4.2 on Dual Pentium III - 800 MHz
> 2
Won't work with my scanner: Mustek 12000 SP plus (scsi, attached on aha-2904)
It worked with LM-7.1 and 7.2
Claudio
--
System: Linux Mandrake (8.0-beta 26/03/2001 install)
Kernel 2.4.2 on Dual Pentium III - 800 MHz
256 MB Ram - Raid Level 1
Hey cookers,
I've have a Mustek 12000SP scanner connected to an adaptec 2940 scsi
interface. It was working on M7.2 but it doesnt with the SANE from
cooker (the scanner freezes after doing a preview when trying to start a
scan).
I could get it to work by getting the latest SANE from their CVS. I
(I hope I'm sending this to the maintainer of this package)
Can the sane package please be updated? A new version (1.0.4) of sane
has recently been released (they split it up into a frontend and backend
tar.gz file).
The current cooker version is 1.0.3, it hasn't been building for some
time now
Has anyone else had any problems with SANE with 7.1 or cooker?
I am unable to scan on Mandrake 7.1 or a cooker install, nor am I able to scan
with 7.0 upgraded to a 2.2.16-4mdksmp kernel(I just realized that I haven't
tried it with the monoprocessor kernel). Mandrake 7.0 is fine. I get an I/O
err
37 matches
Mail list logo
