PROTECTED]
Subject: Re: Sound, printing and cdrw
On Tue, 21 Aug 2001, Brice D Ruth wrote:
> I run in runlevel 5 and switching between VTs works fine - even w/
> MOL.
> Since I have linux keycodes enabled, ctrl-alt(option)-Fx does the
> trick for me, previously, ctrl-command-Fx w
On Tue, 21 Aug 2001, Brice D Ruth wrote:
> I run in runlevel 5 and switching between VTs works fine - even w/ MOL.
> Since I have linux keycodes enabled, ctrl-alt(option)-Fx does the trick
> for me, previously, ctrl-command-Fx was necessary.
>
> This is on beta1, not RC1 - still haven't taken t
On Mon, 20 Aug 2001, Jeff Hergan wrote:
> On Monday 20 August 2001 09:13, Brice D Ruth wrote:
> > The problem doesn't seem to be the driver, in this case - it appears to
> > be the format that the data is sent to the printer. From what Vincent
> > wrote, the USB system picks up the wrong format
I run in runlevel 5 and switching between VTs works fine - even w/ MOL.
Since I have linux keycodes enabled, ctrl-alt(option)-Fx does the trick
for me, previously, ctrl-command-Fx was necessary.
This is on beta1, not RC1 - still haven't taken the time to do that ...
still haven't taken the ti
On Monday 20 August 2001 09:13, Brice D Ruth wrote:
> The problem doesn't seem to be the driver, in this case - it appears to
> be the format that the data is sent to the printer. From what Vincent
> wrote, the USB system picks up the wrong format to send the data - hence
> the problem.
>
That's
The problem doesn't seem to be the driver, in this case - it appears to
be the format that the data is sent to the printer. From what Vincent
wrote, the USB system picks up the wrong format to send the data - hence
the problem.
-Brice
Vincent Danen wrote:
>On Sat Aug 18, 2001 at 12:09:34AM
On Mon Aug 20, 2001 at 12:18:36AM -0700, Ben Reser wrote:
> > > > Can't help you with this... I don't think there's much that can be
> > > > done here until the appropriate drivers are written. I've got a
> > > > Lexmark Z22 (USB) that's connected to my mac machine and the drivers
> > > > are e
On Sat Aug 18, 2001 at 12:09:34AM -0700, Ben Reser wrote:
> > Can't help you with this... I don't think there's much that can be
> > done here until the appropriate drivers are written. I've got a
> > Lexmark Z22 (USB) that's connected to my mac machine and the drivers
> > are experimental... c
> Sorry I can't be more specific, but I use Gnome.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Vincent
> Danen
> Sent: Saturday, August 18, 2001 3:01 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Sound, printing and cdrw
mailto:[EMAIL PROTECTED]]On Behalf Of Vincent
> Danen
> Sent: Saturday, August 18, 2001 3:01 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Sound, printing and cdrw
>
> On Fri Aug 17, 2001 at 05:27:49PM -0500, Jeff Hergan wrote:
> > Can someone help me with this?
> >
> >
fic, but I use Gnome.
- -Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Vincent
Danen
Sent: Saturday, August 18, 2001 3:01 AM
To: [EMAIL PROTECTED]
Subject: Re: Sound, printing and cdrw
On Fri Aug 17, 2001 at 05:27:49PM -0500, Jeff Hergan wrote:
> Can so
On Fri, 17 Aug 2001, Brice D Ruth wrote:
> Hi Jeff,
>
> The output from your log is exactly what we're looking for. Once usblp0
> is registered, cups will be able to access it, properly. Try going
> through the CUPS config again - remember, if you restart, you need to
> reload that printer
On Saturday 18 August 2001 01:56, you wrote:
> On Sat, Aug 18, 2001 at 01:35:26AM -0500, Jeff Hergan wrote:
> > I could really use a little hand-holding on this one--especially now that
> > I know it should work.
>
> The instructions are on that page. Scroll down to the drivers. Under
> postscri
On Sat, Aug 18, 2001 at 01:00:57AM -0600, Vincent Danen wrote:
> Can't help you with this... I don't think there's much that can be
> done here until the appropriate drivers are written. I've got a
> Lexmark Z22 (USB) that's connected to my mac machine and the drivers
> are experimental... color
On Fri Aug 17, 2001 at 05:27:49PM -0500, Jeff Hergan wrote:
> Can someone help me with this?
>
> I'm trying to get an HP Laserjet 1200s (USB) running, using cups.
> During the install, it showed a list of drivers but HP Laserjet 1200s
> was not among them. There's even an HP Laserjet utility in
On Sat, Aug 18, 2001 at 01:35:26AM -0500, Jeff Hergan wrote:
> I could really use a little hand-holding on this one--especially now that I
> know it should work.
The instructions are on that page. Scroll down to the drivers. Under
postscript look for the link to Linux Mandrake instructions. T
On Saturday 18 August 2001 00:57, you wrote:
> On Sat, Aug 18, 2001 at 12:32:37AM -0500, Jeff Hergan wrote:
> > Anyway, there is no driver for HP Laserjet 1200 there.
> > I tried Laserjet Series, and Laserjet cups v1.1 but neither works at
> > all--no response from the printer at all.
>
> Hope thi
On Sat, Aug 18, 2001 at 12:32:37AM -0500, Jeff Hergan wrote:
> Anyway, there is no driver for HP Laserjet 1200 there.
> I tried Laserjet Series, and Laserjet cups v1.1 but neither works at all--no
> response from the printer at all.
Hope this helps.
http://www.linuxprinting.org/show_printer.cgi?r
Hi Brice (and all)
Thanks again for your help.
It looks like usblp0 gets detected during startup, but I added
the line to rclocal anyway.
I did as you suggested and reconfigured via the Mandrake Control Center.
There are about 100 HP drivers there. I tried about 30 of them.
None work. But--and I
Hi Jeff,
The output from your log is exactly what we're looking for. Once usblp0
is registered, cups will be able to access it, properly. Try going
through the CUPS config again - remember, if you restart, you need to
reload that printer module, since its not a permanent thing. If you'd
li
rpm -qa | grep -i alsa
works quite well, too :)
Ben Reser wrote:
>On Fri, Aug 17, 2001 at 07:25:33PM -0500, Jeff Hergan wrote:
>
>>But I have no idea where to find the alsa rpms. I'm assuming they're
>>installed. I do see a /usr/share/alsa directory...
>>
>
>rpm -q alsa-lib alsa-utils alsa-l
On Fri, Aug 17, 2001 at 07:25:33PM -0500, Jeff Hergan wrote:
> But I have no idea where to find the alsa rpms. I'm assuming they're
> installed. I do see a /usr/share/alsa directory...
rpm -q alsa-lib alsa-utils alsa-lib-devel
--
Ben Reser <[EMAIL PROTECTED]>
http://ben.reser.org
Wizard's F
OK Here's my /etc/modules.conf.
I wasn't sure what to do with the alias-sound-slot line.
I left as it was:
pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-ohci
alias sound-slot-0 dmasound_awacs
alias scsi_hostadapter ide-scsi
alias eth0 gmac
#
#
#
#
OK, now for the sound - this can get a bit tricky, so bear with me, 'k?
I have an iMac DV (late 2000) w/ sound working fine - so have hope :)
First, you should know that I use alsa for sound - so if you have
something against alsa, this won't work for you.
Step one - configure /etc/modules.co
On Friday 17 August 2001 18:38, Brice D Ruth wrote:
> Hey there - I think I can help you w/ most of these things, but let's
> try to tackle one at a time, eh? :)
>
> First off - with the USB printer, is your printer being recognized by
> the USB subsystem? This would probably require you insertin
Hey there - I think I can help you w/ most of these things, but let's
try to tackle one at a time, eh? :)
First off - with the USB printer, is your printer being recognized by
the USB subsystem? This would probably require you inserting the
'printer' module - something like this should do the
Can someone help me with this?
I'm trying to get an HP Laserjet 1200s (USB) running, using cups.
During the install, it showed a list of drivers but HP Laserjet 1200s
was not among them. There's even an HP Laserjet utility in
the Printing setup menu--but it just won't work.
And the sound thing-
27 matches
Mail list logo
