On 16/12/06, Junichi Uekawa [EMAIL PROTECTED] wrote:
1. Is it timing out on the client side?
It seems to happen quite instantly. Plus wget gets the content well also
without delay, so I doubt it.
2. Is the server sending the wrong Content-Lentgth
The content length is 39165 but the
Package: postfix
Version: 2.3.5-2
Severity: wishlist
Tags: patch l10n
Please find the updated German debconf translation for postfix
attached.
Please place this file in debian/po/ as de.po for your next upload.
If you update your template, please use
'msgfmt --statistics pofile.po'
to check
Hello,
the new strings added in 2.3.5-2 also add the following new typo:
-mydomain must be specified, since hostname(2) is not a fully-quallified
+mydomain must be specified, since hostname(2) is not a fully-qualified
Greetings
Helge
--
Dr. Helge Kreutzmann
Package: debbugs
Version: Bugs server gets HTTP 500 error when wrong content type is posted
to itSeverity: normal
I tried to simulate a request from apt-listbugs using wget and forgot to
override the Content-Type header of the request. This caused soap.cgi to
generate a 500 Server Error
Package: kdict
Version: 4:3.5.5-3
I'm using Debian Etch and KDE. I can use kdict normally when launched
from command line (i.e., $ kdict). When kdict is docked on the panel as
an applet (i.e., right click on the panel - Add Applet to Panel -
Dictionary), the icon shows up on the panel. I
On Saturday 16 December 2006 01:38, Daniel Dent wrote:
The system comes up fine and correctly configured after it
has been booted. However, it doesn't shutdown properly.
Because / is on LVM the volume group refuses to deactivate
because / is still mounted (even though it is only read only
by
Package: mailman
Version: 1:2.1.9-3
Severity: grave
On upgrade from a version between 1:2.1.8-3 and 1:2.1.9-2 to
1:2.1.9-3, the private copy of the pythonlib module email is not
symlinked in /var/lib/mailman; that's because dpkg will not replace a
directory by a symlink; we need to do it by hand
Package: wpasupplicant
Version: 0.5.5-4
Severity: normal
Hello,
I just discovered that current wpa_supplicant just segfaults if the
specified interface is not available at all. Here the log and strace
log, as executed by ifup:
ifup eth1=kpax
ioctl[SIOCSIWPMKSA]: No such device
severity 402844 normal
tags 402844 moreinfo
thanks
Sam: any chance you could send your configuration to this bug?
Specifically, the following files:
/etc/krb5.conf
/etc/cyrus.conf
/etc/imapd.conf
/etc/default/saslauthd (unless you use an auxprop mechanism, of course)
Michael:
On Thu,
tags 395252 etch-ignore
thanks
On Fri, Dec 15, 2006 at 11:58:10AM +0100, A Mennucc wrote:
Steve Langasek ha scritto:
On Wed, Dec 13, 2006 at 09:24:05AM +0100, A Mennucc wrote:
Just for the record: the release team had already expressed his view
(in a sense): in Oct, there was already a
tags #403300 confirmed pending
thanks
On Sat, Dec 16, 2006 at 12:48:53AM +, Tristan Hill wrote:
Setting up nagios2-common (2.6-1) ...
Adding system-user for nagios
Creating config file /etc/nagios2/apache2.conf with new version
Creating config file
Don't use the Debian/GNU 3.1 with software RAID1 and kernel 2.6.18.
I tested with SCSI and IDE drives with different controllers and PCs
and IMPORTANT DATA LOSS can occur. It seems to be a problem with mdadm,
maybe a new version of mdadm is required.
Coman Catalin
--
To UNSUBSCRIBE, email to
On Sat, 9 Dec 2006 17:29:03 +0100 Holger Wansing wrote:
On Sat, 09 Dec 2006 16:02:03 +0100 Liniger Simon wrote:
sorry the programm doesen't work the normal mode and the epert
mode are both uncompatible with my system.
--
We need more informations on this incompatibility to solve
this:
On Fri, Dec 15, 2006 at 01:02:55PM +0100, A Mennucc wrote:
lets come to today
today, the ffmpeg inside Debian is 6 months older then the one in
MPlayer; for that reason , DynLEF fails . When I tried it,
I also tried 'make -k' , to see if there were few failures that I could
fix; but the
On Saturday, 16 December 2006, you (Eduard Bloch) wrote:
Please test them and report problems if you find any, and add your
config then. Or report success and I will try to push an update of the
package into Etch.
Hello,
I downloaded and tested: http://rootfs.net/debs/icewm_1.2.28-4_i386.deb
* Sven Luther [EMAIL PROTECTED] [2006-12-16 00:26]:
- powerpc/chrp_pegasos)
+ powerpc/chrp_pegasos|powerpc/chrp_efika)
This conflicts with #403295 which defines EFIKA as
powerpc/chrp_pegasos...
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Le samedi 16 décembre 2006 04:18, Rob Browning a écrit :
[EMAIL PROTECTED] writes:
Do you know how to use an etch chroot on vaughan? (I guess this is the
only mipsel machine available to developers?)
Thanks in advance.
I just started a build in the vaughan sid chroot, and it's well
Package: exaile
Version: 0.2.6+debian-1
Severity: normal
Hi there,
I wanted to try Exaile out, but after apt-getting it I received this error:
[EMAIL PROTECTED]:~$ exaile
Traceback (most recent call last):
File /usr/bin/exaile, line 67, in ?
from xl import *
File
On Sat, Dec 16, 2006 at 09:43:51AM +0100, Frans Pop wrote:
On Saturday 16 December 2006 01:38, Daniel Dent wrote:
The system comes up fine and correctly configured after it
has been booted. However, it doesn't shutdown properly.
Because / is on LVM the volume group refuses to deactivate
Package: openvpn
Version: 2.0.7-1
Severity: serious
Justification: breaks user config
Hi,
yesterday, I upgraded my notebook to etch. Before that, I moved the
S??openvpn link in /etc/rc2.d to K??openvpn, because I don't use the
VPN at the moment. After the upgrade, the links was back, at S16.
Package: wpasupplicant
Version: 0.5.5-4
Severity: normal
Hello,
I just hat to swear once again about wpa_supplicant. After consolidation
of my config some weeks ago I have kept wpa-essid directions there,
and I assumed that they are correct because nothing complained. However,
it does not work!
On Saturday December 16, [EMAIL PROTECTED] wrote:
Don't use the Debian/GNU 3.1 with software RAID1 and kernel 2.6.18.
I tested with SCSI and IDE drives with different controllers and PCs
and IMPORTANT DATA LOSS can occur. It seems to be a problem with mdadm,
maybe a new version of mdadm is
On Dec 14, Hendrik Sattler [EMAIL PROTECTED] wrote:
Let's say it this way: which devices that use the MMC protocol (or SD
storage)
are non-removable?
Nevermind, I tought that the MTD drivers shared the same infrastructure.
I will upload a new udev package forcing all mmc, firewire, usb and
Package: cryopid
Version: 0.5.9.1-1
Severity: serious
Hello,
There was a problem while autobuilding your package:
Automatic build of cryopid_0.5.9.1-1 on avidan by sbuild/i386 98
Build started at 20061215-1058
**
...
Package: sysfence
Version: 0.14-1
Severity: wishlist
I found quite strange you do not provide an easy init script for
sysfence. It works as a daemon and you could provide a silly script
which starts/stop it using an /etc/sysfence.conf file, with usual conventions
about /etc/default/sysfence
tags 403034 - security
severity 403034 normal
thanks
Firstly, this isn't a security issue. Clamav does segfault if you give
it a $loop value of about 10,000, but that wouldn't cause a DoS.
As it's not a security issue, it's not grave.
Important is defined as:
a bug which has a major effect
Package: flashrom
Version: 0.0+r2526-1
Severity: serious
Hello,
There was a problem while autobuilding your package:
At 1166224091 time_t, [EMAIL PROTECTED] wrote:
Automatic build of flashrom_0.0+r2526-1 on avidan by sbuild/i386 98
Build started at 20061216-0007
On Fri, Dec 15, 2006, Mathieu Malaterre wrote:
Package: totem
Severity: important
I cannot watch the following movie:
http://homepage.mac.com/rossetantoine/osirix/PICTS/HeadFlyThru.mov
Is this with totem-xine or totem-gstreamer?
Please use reportbug to report bugs.
--
Loïc Minier
On Fri, 2006-12-15 at 23:58 -0500, Matt `da Wolf wrote:
It's not just limited to the NV driver. I'm on VESA. This didn't start
happening tilll I did a dist-upgrade back around March. I was on an NV
card back then. I'm on an ATI Radeon 9500. Happens on both cards.
Before that, it was rock
tags 403245 upstream
tags 403267 upstream
clone 403245 -1
reassign -1 dvipdfmx
thanks
Norbert Preining [EMAIL PROTECTED] wrote:
clone 403245 -1
reassign -1 texlive-base-bin
thanks
I guess the same will happen with dvipdfm in texlive.
And with dvipdfmx, it has the same code in pdfdoc.c.
Package: libdanga-socket-perl
Version: 1.55-1
Severity: serious
Hello,
There was a problem while autobuilding your package:
Automatic build of libdanga-socket-perl_1.55-1 on avidan by sbuild/i386 98
Build started at 20061215-1003
Michael Kerrisk [EMAIL PROTECTED] wrote:
Hi Michael,
The prototype was fixed after another report -- the fis will be in upstream
2.44.
I've fixed this bit for upstream 2.44.
Thanks for your report.
Thanks for the quick fix !
JB.
--
Julien BLACHE [EMAIL PROTECTED] | Debian, because
Package: libsys-syscall-perl
Version: 0.22-1
Severity: serious
Hello,
There was a problem while autobuilding your package:
Automatic build of libsys-syscall-perl_0.22-1 on avidan by sbuild/i386 98
Build started at 20061215-1004
reassign 401006 linux-2.6
severity 401006 grave
retitle 401006 mm/msync leading to filesystem corruption
thanks
Seems other people see problems with mm/msync too.
* [EMAIL PROTECTED] [EMAIL PROTECTED] [2006-12-16 13:32]:
I think something got wrong with this change, regarding mmap/msync on
[preface: the following is just for the sake of discussion - I am
satisfied by how we reached an agreement]
Steve Langasek ha scritto:
On Fri, Dec 15, 2006 at 01:02:55PM +0100, A Mennucc wrote:
ffmpeg is developed inside MPlayer ; for that reason, they (correctly)
feel free to improve it in
Package: vde2
Version: 2.1.4-1
Severity: minor
First of all: thanks for getting vde2 in Debian!
The manpage for wirefilter contains some mistakes though:
Below DESCRIPTION:
...
dpipe vde_plug /tmp/s1 = wirefilter -l 10 = vde_plug /tmp/s1
creates a wire between two vde_switches (with sockets
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alexander Sack - Debian Bugmail wrote:
| On Thu, Dec 14, 2006 at 02:31:17PM +0100, Caspar Bothmer wrote:
|line rewritten so one can easily see this information. I first did a
|search for this pattern, removing all found messages.
| How is this done?
clone 403268 -1
reassign 403268 rootskel
tag 403268 + pending
reassign -1 directfb
retitle -1 [G-I] Use of ps2mouse module freezes Toshiba Satellite A40
thanks
On Saturday 16 December 2006 02:45, Attilio Fiandrotti wrote:
I guess your hardware is a bit different from mine (IIUC your
Package: file
Version: 4.17-4
Severity: wishlist
Hi,
file has no idea of what the file is when feeded with a cpickled hash.
$ file baz
baz:
$
steps to reproduce:
python EOF
a = {}
a['foobar'] = 'asdfadf'
import cPickle
f = open(baz, 'w')
cPickle.dump(a,f)
f.close()
EOF
however, it is
Vincent Lefevre [EMAIL PROTECTED] wrote Sat, Dec 16, 2006:
BTW, I wonder why color is disabled by default in xterm-xfree86!
The other applications have no problem with it.
ELinks only has a handful[1] of built-in terminal configurations.
I have no such problem in the shell, for instance.
Package: zaptel
Version: 1:1.2.11.dfsg-2~sarge.2778
Severity: wishlist
Zaptel 1.2.12 and asterisk 1.2.14 has been released.
It would be nice to have latest stable release before Etch is released
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (90, 'testing')
Hi
I have upgraded the package to version 4.2.2 but I have not found anyone
willing to upload it for me. I will fix your bug and try once more with
getting someone to upload the new version for me this weekend.
Regards
Gudjon
Þann Föstudagur 15. desember 2006 16:30 skrifaði Ana Guerrero:
Package: f-spot
Version: 0.3.0-1
Followup-For: Bug #315484
Hi,
I'm trying to use f-spot to import photos from my canon eos 350d wich
use USB/PTP mode (no mass storage available). When trying to select it
in the import window, it crashes giving a backtrace (attached). gtkam,
gthumb and gphoto
Jan Wagner [EMAIL PROTECTED] wrote:
The above patch fixes the problem for me. No more out of memory messages in
phpmyadmin when exporting databases after applying the patch and recompiling
the package.
I've been bitten by the same bug as I'm running Sarge with PHP5 from
backports.org.
I
severity 402926 grave
tags 402926 -unreproducible
found 402926 3.6.0-19
found 402926 3.6.0-20.2
thanks
On Sat, Dec 16, 2006 at 12:44:01AM +0100, Ana Guerrero wrote:
I just built this package without problems in a pbuilder i386/sid.
The bug reported was that atlas3-headers can't be used for
Package: gcc-doc
Version: 4:4.0.3-4
Severity: serious
Justification: Policy 7.5
Preparing to replace gcc-doc 4:4.0.3-4 (using
.../gcc-doc_4%3a4.1.1.nf2_all.deb) ...
Removing old /usr/share/doc/gcc-doc symlink.
Unpacking replacement gcc-doc ...
dpkg: error processing
Hi Gudjon,
On Sat, Dec 16, 2006 at 11:38:50AM +0100, Gudjon I. Gudjonsson wrote:
Hi
I have upgraded the package to version 4.2.2 but I have not found anyone
willing to upload it for me. I will fix your bug and try once more with
getting someone to upload the new version for me this
Lionel Elie Mamane wrote:
On upgrade from a version between 1:2.1.8-3 and 1:2.1.9-2 to
1:2.1.9-3, the private copy of the pythonlib module email is not
symlinked in /var/lib/mailman; that's because dpkg will not replace a
directory by a symlink; we need to do it by hand in the postinst. And
From the looks of the code, puzzle generation is dependent on a good solve
method:
[GNUDoku.C]
void GNUDoku::generatePuzzle(float const difficulty, int const seed){
...
Sudoku::solve(stack, top, flag_data, visited);
...
}
Glancing at the solve algorithm, it looks like the solve method
Hello,
I have added a little script in the initrd image to wait for the hard
drives to be up.
Sometimes, the udev script in init-premoutnt finish before the hard
drives are detected. This is due to the firmware loading.
Then mdadm in local-top do not find my devices and the boot fails.
I used
On Sat, 16 Dec 2006 10:55:34 +0100, Julien Danjou wrote:
There was a problem while autobuilding your package:
t/01-epoll...Can't bind : IO::Socket::INET: Bad protocol 'udp'
I've fixed this bug by adding netbase to Build-Depends-Indep in our
svn repository.
Could someone please
On Sat, Dec 16, 2006 at 11:15:05AM +0100, Caspar Bothmer wrote:
Alexander Sack - Debian Bugmail wrote:
| On Thu, Dec 14, 2006 at 02:31:17PM +0100, Caspar Bothmer wrote:
|line rewritten so one can easily see this information. I first did a
|search for this pattern, removing all found
Op 16-12-2006 om 10:05 schreef Martin Michlmayr:
This conflicts with #403295 which defines EFIKA as
powerpc/chrp_pegasos...
s/295/239/ so being http://bugs.debian.org/403293
GSt
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Op 16-12-2006 om 00:21 schreef Sven Luther:
--- src/system/subarch-powerpc-linux.c(révision 43393)
+++ src/system/subarch-powerpc-linux.c(copie de travail)
@@ -21,6 +21,7 @@
static struct map map_machine[] = {
{ PReP, prep },
{ CHRP Pegasos, chrp_pegasos },
+
Karai Csaba wrote:
Ok I run valgrind on krusader.
Basicly there are some X server errors printed to stdout, perhaps this
is fault of testing Xorg versions in my debian testing,
and other errors like null hash (QT or krusader error)
and warnings about layout problems (I suppose krusader fault?)
Package: eterm
Version: 0.9.4.0debian1-2
Severity: important
Seems that the file-parameter is not io...
Also, it seems, that the programm lacks to check for the result, as it
does not fail (it also ask the question, but does not wait for user input).
Exit-Code is also 0 even if a failure
On Wed, Dec 13, 2006 at 10:13:58AM -0800, Thomas Bushnell BSG wrote:
This however does not solve the name clash with Aleph. So I think there
are three possibilities (repeating here what Frank already said
somewhat):
1) Leave things alone, and ignore the problem. This, it seems to me,
On (15/12/06 02:56), Felix Palmen wrote:
Hallo James,
The error was thrown from x509_b64.c:449. The reason was very obvious
then: My key just starts with -BEGIN PRIVATE KEY- (no RSA or
DSA).
After a little research, I found that this could mean it's in PKCS#8
format. Indeed, I
Btw, I suggest you adjust the debconf template to be more like exim's (i.e.,
user can enter a :-separated string with all the IPs, or leave it blank).
--
Robert Millan
My spam trap is [EMAIL PROTECTED] Note: this address is only intended for
spam harvesters. Writing to it will get you added
On Sat, 16 Dec 2006, Frans Pop wrote:
I have some doubts about that. / on LVM on RAID is known to work
correctly. Are you sure that the RAID had been fully synced before you
shut down? It seems to me the most likely cause of it being dirty was
that the drives had not yet had a chance to complete
Let's add this to the bug report:
* Gordon Farquharson [EMAIL PROTECTED] [2006-12-16 04:00]:
it would still be nice if you could identify _which_ of the mm
patches is responsible.
2.6.18-8 with just the first patch
(features/mm-tracking-shared-dirty-pages.patch) applied causes the
owner 322097 !
retitle 322097 ITA: libconvert-ber-perl -- Perl implementation of Basic
Encoding Rules (BER)
thanks
On Friday 15 December 2006 10:58, Michael Ablassmeier wrote:
#322097 493 libconvert-ber-perl
Mine too. :-)
--
bye,
- Nacho
http://criptonita.com/~nacho
Frans Pop wrote:
clone 403268 -1
reassign 403268 rootskel
tag 403268 + pending
reassign -1 directfb
retitle -1 [G-I] Use of ps2mouse module freezes Toshiba Satellite A40
thanks
On Saturday 16 December 2006 02:45, Attilio Fiandrotti wrote:
I guess your hardware is a bit different from mine
On Tue, 12 Dec 2006, Brian May wrote:
FYI.
Also see the update-inetd thread I started on debian-devel.
heimdal (0.7.2.dfsg.1-7) unstable; urgency=high
* Don't change services on upgrades, only on fresh installation, purge, and
upgrade from old versions. Closes: #401258.
Please
tags 280537 patch
thanks
Hi!
Here's a patch for multiple interfaces (separated by :).
--
Robert Millan
My spam trap is [EMAIL PROTECTED] Note: this address is only intended for
spam harvesters. Writing to it will get you added to my black list.
diff -ur portmap-5.old/portmap.c
Package: realtime-lsm
Version: 0.8.7-2
Severity: wishlist
I would report this bug against realtime-lsm-source, however, as
reported in #389043, documentation for that package is included in
realtime-lsm, so I report this bug here.
When the user is installing realtime-lsm, it is likely to use it
On Sat, 16 Dec 2006 10:54:45 +0100, Julien Danjou wrote:
There was a problem while autobuilding your package:
t/10-events...couldn't create socket at t/10-events.t line 67.
I've fixed this by adding netbase to Build-Depends-Indep in our svn
repository.
Could someone please check/upload?
Package: ffmpeg
Version: 0.cvs20060823-4
Severity: normal
hi Sam
this bug is just a placeholder to ask you (again) to update ffmpeg
(after Etch release): I really need a newer version, to address
bug 395252
Some time ago, I packed a version 0.svn6767-2 of ffmpeg (it is in
Don Armstrong [EMAIL PROTECTED] wrote:
I did already explain recisely what the problem is.
I've read the logs, and I still have no idea what you're talking
about.
What information do you need?
Let me spell it out the process even more clearly:
1) Send mail explaining precisely what
Hi,
On 12/15/06, Rafal Maj [EMAIL PROTECTED] wrote:
Karai Csaba wrote:
1. Is it possible that you don't have debug mode Krusader?
How to install it on debian?
Take a look at
http://krusader.sourceforge.net/phpBB/viewtopic.php?p=8449#8449
for compiling Krusader-cvs on Debian and
Peter Samuelson [EMAIL PROTECTED] wrote:
[Joerg Schilling]
I did give an example: use what(1) on a binary compiled from the
source before and after the change to see the difference.
If you did look at the SVN, if you did have a look at the most recent
changes. it would be easy to
On 2006-12-16 11:19:51 +0100, Jonas Fonseca wrote:
Vincent Lefevre [EMAIL PROTECTED] wrote Sat, Dec 16, 2006:
BTW, I wonder why color is disabled by default in xterm-xfree86!
The other applications have no problem with it.
ELinks only has a handful[1] of built-in terminal configurations.
Package: gdebi
Version: 0.1.6
Severity: important
In pt_BR, it asks:
Você quer instalar o pacote? [s/N]
But if I press 's' it exits, I have to press y to proceed.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:
Hi,
Here is a new version of the templates.pot file.
Regards,
Pierre
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR [EMAIL PROTECTED], YEAR.
#
#, fuzzy
msgid
msgstr
Package: cvs
Version: 1.12.13-5
Severity: serious
I just noticed that cvs breaks my configuration on upgrades.
I added pserver to the inetd.conf:
| intrepid:~# tail -n1 /etc/inetd.conf
| cvspserver stream tcp nowait.400 root/usr/sbin/tcpd
/usr/sbin/cvs-pserver
| intrepid:~#
Package: cupsys
Version: 1.2.7-1~bpo.1
Severity: important
I have experienced this three times, I think always with USB printers.
At http://localhost:631/admin, the printer is shown correctly as newly
found. After clicking on Add this printer, the browser displays
Loading, but nothing happens,
Package: libcgi-perl
Version: 2.76-24
Hi,
perl-modules conflicts with CGI-modules. The latter package name is
not allowed by policy (upper case letters are not allowd in package
names). This confuses some tools. Since CGI-modules is no longer known
to madison this might be good time to drop
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alexander Sack - Debian Bugmail wrote:
| Sorry for the wrong cut in my quoting ... my how is this done
| ment how do you rewrite subject of spam?
That's quite a different thing, yes :-))
I don't rewrite the subject myself. My provider changes the
Package: dvd+rw-tools
Version: 7.0-4
Severity: normal
This package still depends on 'mkisofs', which nowadays is (in both
testing and unstable) a dummy transition package on 'genisoimage'.
Please update this dependency so that the dummy mkisofs package can be
removed.
Thanks,
--Jeroen
--
Am Donnerstag 14 Dezember 2006 09:47 schrieb Modestas Vainius:
2. # dpkg -i --force-all
kdebase-kio-plugins_3.5.5a.dfsg.1-4~mdx1_i386.deb (I think, force will
be needed due to dependences).
Hello Modestas,
Thanks for all your efforts.
This installed nicely without --force-anything
3. $
On Thu, Dec 14, 2006 at 09:10:49PM +0100, Andreas Henriksson wrote:
tags 403056 + patch
thanks
Patch attached.
Tnx, i'll test it after this weekend.
Regards
--
-
|Marco Nenciarini| Debian/GNU Linux Developer -
reopen 402331
thanks
On Wed, Dec 13, 2006 at 07:40:46PM -0600, Jon Marler wrote:
The way qmail works in Debian is a hack. It's ugly, and it's not the most
graceful thing, but it works. You both seem like smart guys, and I'm sure you
can figure out how to add a user. I'm not the one who
Package: hslogger
Version: 1.0.1
Severity: serious
Hello,
There was a problem while autobuilding your package:
Automatic build of hslogger_1.0.1 on nasya by sbuild/sparc 0.50
Build started at 20061216-1241
...
./setup build
/usr/bin/ar: creating dist/build/libHShslogger-1.0.1
On Fri, Dec 15, 2006 at 10:53:37PM +0100, Raphael Hertzog wrote:
Hi,
On Fri, 15 Dec 2006, Francesco Cecconi wrote:
Hi Florian,
Looking good so far, but why do you edit in debian/changelog the date
fields of 0.09-4 and 0.09-3? Removing the trailing space in
0.09-dfsg-1 is
Am Donnerstag, den 07.12.2006, 19:01 +0100 schrieb Carl Fürstenberg:
Package: automake
Version: 1.9.6
Severity: minor
From a build:
/usr/share/aclocal/xdelta.m4:7: warning: underquoted definition of
AM_PATH_XDELTA
run info '(automake)Extending aclocal'
or see
On Saturday 16 December 2006 12:44, Joerg Schilling wrote:
The removed text is needed in order to allow people to check the original
version information and Copyright for all relevent files using the what(1)
command.
Until this bug, I had no clue about that what(1) existed. It does also only
On Sat, Dec 16, 2006 at 11:51:38AM +0100, Geert Stappers wrote:
Op 16-12-2006 om 00:21 schreef Sven Luther:
--- src/system/subarch-powerpc-linux.c (révision 43393)
+++ src/system/subarch-powerpc-linux.c (copie de travail)
@@ -21,6 +21,7 @@
static struct map map_machine[] = {
Package: munin-node
Version: 1.2.5-1
Severity: normal
when I make this change the plugin works:
o9:~# diff postfix_mailstats /usr/share/munin/plugins/postfix_mailstats
239c239
$cause = 'OTHER' unless $1 =/^\d+$/;
---
$cause = 'OTHER' unless $1 =~ /^\d+$/;
the
Sven Arvidsson wrote:
Does this bug still happen with the version of gnome-cups-manager
from unstable, currently 0.31-3?
I'm afraid I wont find the time to install gnome anytime soon. It should
be easy enough for anyone to verify the existence of this bug. Just
change the background color
ou are not allowed to store it in your Windows computer.
MIME-Version: 1.0
Content-Type: Multipart/Mixed;
boundary=Boundary-00=_/r+gFn8n9xu7wkl
Message-Id: [EMAIL PROTECTED]
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2005_01_02
(1.212-2003-09-23-exp) on spohr.debian.org
in the file ./wxMaxima change the line
maxima=1
to the correct path, eg:
maxima=/usr/bin/maxima
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Package: aide
Version: 0.13-1
Severity: important
*** Please type your report below this line ***
The FILES section in man aideinit is still wrong!
FILES
/var/lib/aide.db
Default location for AIDE database
/var/lib/aide.db.new
Default location for
On Thu, Dec 14, 2006 at 03:12:30PM -0500, Luke Reeves wrote:
Hi Sean, when I uninstall php4-imap I then get this message:
PHP Warning: Unknown(): Unable to load dynamic library
'/usr/lib/php4/20050606+lfs/imap.so' -
/usr/lib/php4/20050606+lfs/imap.so: cannot open shared object file: No
On Sat, Dec 16, 2006 at 10:05:24AM +0100, Martin Michlmayr wrote:
* Sven Luther [EMAIL PROTECTED] [2006-12-16 00:26]:
- powerpc/chrp_pegasos)
+ powerpc/chrp_pegasos|powerpc/chrp_efika)
This conflicts with #403295 which defines EFIKA as
powerpc/chrp_pegasos...
Oh my, ...
Sorry, you
Hi all,
On Saturday 16 December 2006 11:43, Chris Samuel wrote:
Jan Wagner [EMAIL PROTECTED] wrote:
The above patch fixes the problem for me. No more out of memory messages
in phpmyadmin when exporting databases after applying the patch and
recompiling the package.
It'd be great if this
In order to try these solutions, I created a completely new user (no
existing gconf nor .gnome* dirs).
Unfortunately, even that user had the problem... So unsetting gconf or
deleting the .gnome* dirs does not solve the issue.
Any other idea?
Thanks a lot.
Philippe
--
To UNSUBSCRIBE, email to
Package: gaim
Version: 2.0.0+beta5-8
Hi,
This bug report is going to be a bit vaguer than I would have liked it, so
I can only hope that someone will be able to make sense out of it. I'm
running unstable Debian on an Intel P3.
I was using gaim to connect to IRC at Freenode, but before
The only problem with the script that thttpd ships right now is a missing
space between ^ and $PID:
if ps ax | grep -q ^ $PID; then
since ps ax puts a space in the begining.
Otherwise i think is an overkill to have stop) and force-stop) with the
same content except for the echo,
#. Type: multiselect
#. Description
#: ../glpi.templates:1002
msgid Which web server would you like to reconfigure automatically:
Hmmm, worded like a question but not exactly a question. As
interrogative form is discouraged for select/multiselect, I'd suggest:
Web server to reconfigure
Renaming /usr/bin/aleph will break scripts that #! it...
I dunno if that's common, or actually possible in the language, but it's
something to keep in mind.
Anyway, PDO says it's out of testing now anyway... I guess that's
what happens when you're the first non-not-in-testing RC bug of
the week.
1 - 100 of 342 matches
Mail list logo