Another thing that might well be the same underlying problem:
Using version 2.74.6-2+deb12u1, a Compose sequence like 'Compose " a'
enters nothing in gnome-terminal and emacs.
Using version 2.74.6-2, the same sequence enters an "ä".
Arne
Package: libfreefem++
Version: 4.11+dfsg1-3
Severity: normal
Dear Maintainer,
The conffile /etc/freefem++.pref contains the following lines
loadpath += "/usr/lib/ff++/4.9/lib"
includepath += "/usr/lib/ff++/4.9/idp"
which do not match where files are actually installed.
This leads to errors
Package: resolvconf
Version: 1.91+nmu1
Severity: normal
Dear Maintainer,
Lines like
iface lo inet loopback
dns-search a.example.com b.example.com
in /etc/network/interfaces no longer causes the corresponding entries to show
up in /etc/resolv.conf in bookworm, while they did show up in
Package: unbound
Version: 1.17.1-2
Severity: normal
Dear Maintainer,
When booting with resolvconf installed and the resolvconf update script
(/etc/resolvconf/update.d/unbound) executable, the unbound-resolvconf service
fails:
maj 09 10:47:20 systemd[1]: Started unbound-resolvconf.service -
Den 2023-04-02 kl. 16:22, skrev Arthur de Jong:
On Sun, 2023-02-26 at 10:50 +0100, Arne Nordmark wrote:
The search for enabled services in /etc/nsswitch.conf breaks when
using the Swedish locale.
LANG=C sed -n
's/^[[:space:]]*\([a-z]*\)[[:space:]]*:.*[[:space:]]ldap\([[:space:]].*\)\?/\1/p
Package: libnss-ldapd
Version: 0.9.12-3
Severity: normal
Dear Maintainer,
The search for enabled services in /etc/nsswitch.conf breaks when using the
Swedish locale.
In the debconf ".config" script we have the nss_list_configured() function.
Compare the output in the "C" and the Swedish
Den 2022-07-15 kl. 21:58, skrev Salvatore Bonaccorso:
I would be interested to either pinpoint the regressing commit
upstream beween 5.10.120 and 5.10.127 or conversely the fixing commit
beween 5.10.127 upstream and 5.10.130 where you are not able anymore
to reproduce the error. What I can say,
Sorry for the late reply.
Den 2022-07-13 kl. 12:07, skrev Salvatore Bonaccorso:
Control: tags -1 + moreinfo
Hello Arne,
...
As you seem to reliably reproduce the issue, do you have the
possiblity (on the nonproduction instance) to try to bisect down the
problem? Additionally to the
Package: src:linux
Version: 5.10.127-1
Severity: normal
Dear Maintainer,
The new kernel in Debian 11.4 seems unstable and crashes when serving
NFS. On two different computers, these lockups happens within minutes,
typically when a client runs firefox on an NFS-mounted home directory.
Den 2019-08-09 kl. 03:10, skrev Benjamin Kaduk:
> On Thu, Aug 08, 2019 at 03:16:31PM +0200, Arne Nordmark wrote:
> I will think a bit about whether it is better to leave the akeyconvert
> invocation in openafs-fileserver and make it conditional on akeyconvert's
> presence, add the
Package: openafs-fileserver
Version: 1.8.2-1
Severity: normal
The stanza
if [ -r /etc/openafs/server/rxkad.keytab ] ; then
akeyconvert
fi
in the postinst will fail if openafs-krb5 is not installed or is of version 1.6.
This happens for example when doing a partial upgrade from stretch to
I have also seen this on a couple of SSD-only systems.
I think the problem is that the random number generator takes about two
minutes to initialize, long enough for systemd to give up on these
processes. Unbound is similar, but there unit file keeps trying until
the random numbers are available.
Package: dehydrated
Version: 0.3.1-3+deb9u1
Severity: normal
Since recently, updating a cert no longer works. The challenge works, and the
new cert is created, but creating the cert chain fails:
...
+ Creating fullchain.pem...
+ ERROR: An error occurred while sending get-request to
On Thu, 18 Jan 2018 16:27:35 +0100 Arne Nordmark <nordm...@mech.kth.se>
wrote:
>
> gtlsLoadOurCertKey() uses gnutls_x509_crt_import() on the file data,
and this function only handles one cert.
>
If one uses gnutls_x509_crt_list_import() instead, intermediate certs
cou
Package: rsyslog-gnutls
Version: 8.24.0-1
Severity: normal
The setup consists of a TLS-enabled rsyslog server and TLS-enbled rsyslog
clients without using client certificate authentication.
When DefaultNetstreamDriverCertFile on the server specifies a file with a
single cert (which is signed
Newer OpenAFS versions replace
code = inode_change_ok(inode, );
by
code = setattr_prepare(file_dentry(afile->filp), );
The file_dentry() helper is not present in linux-headers-3.16.0-5
either, but
code = setattr_prepare(afile->filp->f_path.dentry, );
at least seems to compile. Is this the
Control: reassign -1 src:linux
Package: linux-headers-3.16.0-5-amd64
Version: 3.16.51-3+deb8u1
Severity: normal
Since the latest jessie security update, the OpenAFS module (from
openafs-modules-source, version 1.6.9-2+deb8u6)
no longer builds.
The error seems to be:
CC [M]
Package: linux-headers-3.2.0-5-amd64
Version: 3.2.96-3
Severity: normal
Since the latest wheezy security update, the OpenAFS module (from
openafs-modules-source, version 1.6.1-3+deb7u8)
no longer builds.
The error seems to be:
CC [M]
obvious difference (compared to jessie) is the presence of a systemd
unit file in the stretch version.
Is systemd process control clashing with how bos tries to restart itself?
Thanks for maintaining the Debian OpenAFS packages
Arne Nordmark
-- System Information:
Debian Release: 9.0
APT prefers
Note that the man page for dhclient-script says:
The exit status of dhclient-script will be passed to dhclient-exit-hooks
in the exit_sta‐
tus shell variable, and will always be zero if the script succeeded at
the task for which
it was invoked. The rest of the environment as described
For the record: Version 5.1.2-1 (currently in stretch), still shows this
problem, and building --with-libtirpc still resolves the problem.
Are there any known downsides to using libtirpc?
Arne
Den 2016-12-07 kl. 17:35, skrev Emmanuel Bourg:
> Le 7/12/2016 à 13:28, Arne Nordmark a écrit :
>
> Thanks for the info. I'm trying to reproduce the same error but I
> haven't succeeded so far. Here is was I did:
>
...
> 9. Create a test page /var/lib/tomcat7/web
Den 2016-12-07 kl. 11:38, skrev Emmanuel Bourg:
Hi Arne,
Were is located the jar of your JDBC driver?
I have put a symlink in /var/lib/tomcat7/common, so that would be loaded
by the "Common" class loader.
The default Debian configuration in /etc/tomcat7/catalina.properties
seem to be
Den 2016-12-04 kl. 15:00, skrev Markus Koschany:
> On 04.12.2016 09:22, Arne Nordmark wrote:
>> Unfortunately, the newly released wheezy security update 7.0.28-4+deb7u7
>> also suffers from this problem.
>>
>> Can it be so that the important part missing is the loop trav
Unfortunately, the newly released wheezy security update 7.0.28-4+deb7u7
also suffers from this problem.
Can it be so that the important part missing is the loop traversing the
class loaders in validateGlobalResourceAccess():
while (cl != null) {
...
cl = cl.getParent();
}
Arne
Den 2016-11-23 kl. 17:52, skrev Emmanuel Bourg:
> Would you be able to rebuild with this version of the
> ResourceLinkFactory class and see if it works better?
>
> https://raw.githubusercontent.com/apache/tomcat70/TOMCAT_7_0_73/java/org/apache/naming/factory/ResourceLinkFactory.java
>
Indeed,
Den 2016-11-23 kl. 17:52, skrev Emmanuel Bourg:
>
> Would you be able to rebuild with this version of the
> ResourceLinkFactory class and see if it works better?
>
> https://raw.githubusercontent.com/apache/tomcat70/TOMCAT_7_0_73/java/org/apache/naming/factory/ResourceLinkFactory.java
>
I take
Yet another data point:
I rebuilt 7.0.56-3+deb8u5 with CVE-2016-6797.patch deleted, and again
the problem goes away.
Arne
Den 2016-11-23 kl. 14:09, skrev Emmanuel Bourg:
> Did you enable the security manager?
I have not changed that part of /etc/default/tomcat7, so it still reads
#TOMCAT7_SECURITY=no
which should imply that the security manager is not enabled.
Arne
Den 2016-11-23 kl. 12:36, skrev Emmanuel Bourg:
> Hi Arne,
>
> Thank you for reporting this issue. Could you check if it also occurs
> with the tomcat7 package from jessie-backports please?
Thanks for the quick reply.
No, with version 7.0.73-1~bpo8+1 I do not have this problem. I guess
this
Package: tomcat7
Version: 7.0.56-3+deb8u5
Severity: normal
After the security update 7.0.56-3+deb8u5, I get an error message:
ALLVARLIG: Servlet.service() for servlet [Faces Servlet] in context with
path [/mech] threw exception [Filter execution threw an exception] with
root cause
a simple line like
Local-Realms: DAPADAM.NL, UMRK.NL
might do it.
Arne Nordmark
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
/mod_dav_svn.so: undefined symbol:
dav_svn__new_error
Arne Nordmark
-- System Information:
Debian Release: 7.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=sv_SE.UTF-8, LC_CTYPE
It looks like this is down to autofs not handling names using only
IPv6 addresses. Not sure why this happens given that I would have
expected it to just pass this directly to mount(8) but it's
presumably doing more than that. Not sure exactly what the cause
is, though
, and a rebuild in a current
wheezy environment
is enough to solve this problem.
It would be nice to see such a rebuilt in upcoming stable (wheezy) releases.
Thanks
Arne Nordmark
-- System Information:
Debian Release: 7.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500
Package: dh-make-drupal
Version: 1.7-1
Severity: normal
Developer versions of modules are detected as both recommended and
developer,
and selected over recommended versions, when scanning the Drupal site.
kaipak[nordmark]~/tmp dh-make-drupal -D --debug 3 date
D:Parsed options:
---
d_ver: 7
Package: isc-dhcp-client
Version: 4.2.2.dfsg.1-5
Severity: normal
Tags: upstream ipv6 patch
dhclient unconditionally assumes an on-link prefix matching the address
and with a length of 64 when setting an IPv6 address. Like routing
information, on-link prefix information is not part of the
This is reported in network manager upstream as
https://bugzilla.gnome.org/show_bug.cgi?id=656610
A fix was recently committed upstream as
eb460b70dad82d366d35fa5703c0e79a1389e4d1.
Arne
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
2012-03-01 16:31, Jonathan Nieder skrev:
tags 661581 = upstream
forwarded 661581 http://thread.gmane.org/gmane.linux.kernel/1240187/focus=52118
quit
Arne Nordmark wrote:
Some newer ASUS mainboards fails to resume from suspend on
Linux. Instead the computer immediately restarts a few times
Package: network-manager
Version: 0.8.1-6+squeeze1
Severity: normal
Tags: ipv6
On my IPv6 network with prefix length 112, network manager sets the IPv6
address on the interface with prefix length 64:
nordmark@ano7:~$ ip -6 addr
2: eth0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast
2012-03-01 16:31, Jonathan Nieder skrev:
tags 661581 = upstream
forwarded 661581 http://thread.gmane.org/gmane.linux.kernel/1240187/focus=52118
quit
Arne Nordmark wrote:
Some newer ASUS mainboards fails to resume from suspend on
Linux. Instead the computer immediately restarts a few times
Package: linux-2.6
Version: 3.2.4-1~bpo60+1
Severity: normal
Tags: patch
Some newer ASUS mainboards fails to resume from suspend on
Linux. Instead the computer immediately restarts a few times, and then
does a full boot. This has been traced to an ACPI problem, and a symtom
is the kernel
Package: libpam-afs-session
Version: 1.7-2
Severity: normal
When using pam_afs_session with local logins for vsftp, a vsftp
process hangs on wait4() shortly after completing pam_setcred(),
hanging the ftp connection.
While running pam, vsftp has a handler for SIGCHLD installed, recording
the
Package: dovecot-imapd
Version: 1:1.2.15-7
Severity: normal
This seems to be a regression from lenny, and was found to be the
source of the IMP4 web mail system becoming essentially unusable,
since the 5s delay hits just about any operation in the web mail system.
In this case dovecot imapd
Package: grub-pc
Version: 1.98+20100804-13
Severity: normal
Because of #601141,
grub-pc postinst will always ask for devices to install, when
installed on multiple devices. When doing non-intercative parallel
upgrades (in my case using pdsh), this casuses the upgrade process to
stop at that
Package: pdsh
Version: 2.18-6
Severity: normal
Support for gender expressions seems broken:
kaipak[nordmark]~ pdsh -g 'debian=lennyws' uname -v
p...@kaipak: no remote hosts specified
On the other hand:
kaipak[nordmark]~ nodeattr -c 'debian=lennyws'
Consider the check in config-scripts/cups-ssl.m4:
if test x$have_pthread = xyes; then
AC_MSG_WARN([The current version of GNU TLS cannot be
made thread-safe.])
else
have_ssl=1
From the build log:
checking for libgnutls-config... no
Package: cups
Version: 1.4.4-1
Severity: normal
As of the latest squeeze version, TLS support seems to be gone.
/var/log/cups/error_log:
E [06/Jul/2010:07:52:39 +0200] Unknown directive ServerCertificate on line 142.
E [06/Jul/2010:07:52:39 +0200] Unknown directive ServerKey on line 143.
E
Package: sendmail-base
Version: 8.14.3-5+lenny1
Severity: wishlist
update_tls scans sendmail.mc for a line like
include(`/etc/mail/tls/starttls.m4')dnl
and if not found, a warning message is printed and /etc/mail/tls/starttls.m4
is overwritten.
We use only the submit portion of sendmail, with
Ben Hutchings wrote:
On Fri, 2010-06-18 at 16:40 +0200, Arne Nordmark wrote:
My problem seems related to those in Ubuntu report #55
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/55. If I
unload the 3c59x module, I can no longer reproduce this problem, and
wireless is stable
My problem seems related to those in Ubuntu report #55
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/55. If I
unload the 3c59x module, I can no longer reproduce this problem, and
wireless is stable. With the 3c59x module loaded, b43 wireless is
essentially unusable, since the
] ?
irq_thread+0x0/0x1a5
May 8 09:35:48 dhcp190 kernel: [ 1830.644979] [c104439c] ?
kthread+0x61/0x66
May 8 09:35:48 dhcp190 kernel: [ 1830.644991] [c104433b] ?
kthread+0x0/0x66
May 8 09:35:48 dhcp190 kernel: [ 1830.645012] [c1003d47] ?
kernel_thread_helper+0x7/0x10
Arne Nordmark
Sounds like bug #548120.
Arne
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
After rebuilding libpulsecore5 0.9.10-3+lenny2 from source on amd64,
pulseaudio now works for me again. Maybe the build environment for the
security update was broken?
Arne
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: pdsh
Version: 2.16-1
Severity: normal
Running pdsh using a /etc/genders file results in an assertion error:
kaipak[nordmark]~ pdsh -a uptime
pdsh: list.c:288: list_count: Assertion `l != ((void *)0)' failed.
pdsh: list.c:288: list_count: Assertion `l != ((void *)0)' failed.
Running
I can no longer reproduce this in etch (v 1.1-3), so this issue seems to
be fixed.
Thanks,
Arne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello,
I can no longer reproduce this problem in lenny (v 0.2.3-2), so this
problem may be fixed.
Thanks,
Arne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Sorry, The previous message should refer to lenny.
Arne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
at exit hook time, and possibly
keep ntp_servers_setup_remove running at enter hook time.
--
Aleksi Suhonen
Arne Nordmark
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I encountered the same problem.
Maybe the attached patch could be used?
Arne
--- sendmail-8.13.8/sendmail/srvrsmtp.c 2007-09-24 15:46:20.0 +0200
+++ build-tree/sendmail-8.13.8/sendmail/srvrsmtp.c 2007-09-24 15:47:01.0 +0200
@@ -1552,7 +1552,7 @@
break;
}
- if
Subject: geneweb: Action in logrotate file does not work
Package: geneweb
Version: 4.10-25
Severity: normal
*** Please type your report below this line ***
/etc/logrotate.d/geneweb contains the lines
postrotate
invoke-rc.d force-reload /dev/null
which leads to the error
indeed solves the problem.
Thank you
Arne Nordmark
--- neon26-0.26.2/src/ne_auth.c 2007-03-03 07:35:07.0 +0100
+++ ne_auth.c 2007-03-03 07:32:18.0 +0100
@@ -516,7 +516,7 @@
char *sep, *ptr = strchr(duphdr, ' ');
int ret;
-if (strncmp(hdr, Negotiate, ptr - hdr) != 0
I believe that this is the same issue as 412061.
If that is the case, the bugs should be merged.
Thank you for your work.
Arne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: heimdal-clients
Version: 0.7.2.dfsg.1-9
Severity: normal
After logging in using GDM and the libpam-krb5 PAM module,
the ccache env variable is set to
KRB5CCNAME=/tmp/krb5cc_1015_snP3CL
lognan[nordmark]~ klist
Credentials cache: FILE:/tmp/krb5cc_1015_snP3CL
Principal: [EMAIL
Package: libpam-openafs-session
Version: 1.0-6
Severity: normal
In pam_close_session(), one finds
if(setuid(UID) 0) {
called in the current process.
This breaks for example gdm, which can no longer control the X server during
logout, and it subsequently complains about :0 being busy.
If
The code now uses NULL as the cleanup function in pam_set_data().
I recommend closing this bug.
Thanks
Arne
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: libpam-openafs-session
Version: 1.0-5.1
Severity: normal
In pam_sm_close_session() in pam_openafs-krb5_sess.c, one finds the test
if (!pam_get_data (pamh, aklog_run, data) ) {
DLOG (pam_close_session, Aklog never run so not running unlog);
return PAM_SUCCESS;
}
However,
Package: login
Version: 1:4.0.18.1-5
Severity: minor
From src/su.c:
child = fork ();
if (child == 0) { /* child shell */
pam_end (pamh, PAM_SUCCESS);
if (doshell)
(void) shell (shellstr, (char *) args[0], envp);
Russ Allbery wrote:
Arne Nordmark [EMAIL PROTECTED] writes:
Package: openafs-modules-source
Version: 1.4.2-2
Severity: normal
aklog -setpag no longer works with the kernel module from 1.4.2-2. This
breaks libpam-openafs-session, so users no longer get token upon login.
Unfortunately
Package: openafs-modules-source
Version: 1.4.2-2
Severity: normal
aklog -setpag no longer works with the kernel module from 1.4.2-2.
This breaks libpam-openafs-session, so users no longer get token upon login.
[EMAIL PROTECTED]:~$ aklog -setpag
[EMAIL PROTECTED]:~$ tokens
Tokens held by the
Package: winbind
Version: 3.0.23c-2
Severity: normal
/usr/bin/passwd crashes with Segmentation fault when changing password.
passwd: password updated successfully
Segmentation fault
The password is acually changed OK, the crash comes during PAM cleanup.
The problem seems to be these lines
Package: libpam-krb5
Version: 2.4-1
Severity: normal
With
password required pam_cracklib.so retry=3 minlen=4 difok=1
password optional pam_krb5.so use_authtok
in /etc/pam.d/comon-password, /usr/bin/passwd crashes like
Password:
New UNIX password:
Retype new UNIX password:
*** glibc detected
This issue has been solved in CUPS 1.2.2, see upstream STR 1798.
I have verified that in works now in Debian Etch.
Thanks
Arne Nordmark
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I reported this upstream as STR #1887, and a fix is promised for the
upcoming 1.2.3 release.
Thanks
Arne Nordmark
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
consequences.
Thanks,
Arne Nordmark
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8
Package: cupsys
Version: 1.2.1-2
Severity: minor
At the log level setting of
LogLevel info
the informational message about BrowseRelay settings (as recorded in
/var/log/cups/error_log) has the source
and destination fields exchanged. For example having
BrowseRelay ano2.mech.kth.se
Package: cupsys
Version: 1.2.1-2
Severity: normal
Relaying CUPS browse packet does not seem to work. Using
BrowseRelay ano2.mech.kth.se anobhs-bcast.mech.kth.se
cases the follwing error message
E [11/Jun/2006:07:14:19 +0200] cupsdUpdateCUPSBrowse: sendto failed for
relay 1
- Invalid
Hello,
Russ Allbery wrote:
tags 132601 moreinfo
thanks
Greetings,
I'm going through old bugs on the Debian OpenAFS packages, and found this
bug that you had filed a bit over three years ago:
| Package: openafs-modules-source
| Version: 1.2.3final2-0.potato1
|
| The module does not load in a
Package: arla
Version: 0.36.2-11
Severity: normal
udev version 0.053-1 creates the directory /dev/.udevdb instead of
/dev/.udev.tdb so the ugly hack in /etc/init.d/arla no longer works
with kernel-image-2.6.8. Changing the test to
# ugly hack to create the device if running udev
# Should be
80 matches
Mail list logo
