Hi all!
I just bought an Ascend Pipeline 25fx and I don't know where to start in
the installation/configuration process. It has an ethernet-to-ISDN
bridge and routing for 4 IP's.
I would appreciate any help!!
Thanks,
Ian
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe
> Hey everyone!
>
> Simple (hopefully) question. I've got an IDE drive on an Tyan
> motherboard with an Award BIOS. I recently went out and bought a
> Seagate Cheetah drive on a Symbios Logic (aka NCR) 53c875 host
> adapter (an AWESOME combination, BTW ) How do I make the system
> boot from the
Hello,
I have been running sendmail on my machine at home for a long time
with few problems. I use mh and exmh, and sometimes elm.
When I recently installed Debian on a machine at work I decided to try
exim instead of sendmail. I liked it so I replaced sendmail with exim
on my machine at home.
Phil,
> This is because you created you mdtab by hand, and not with mdcreate.
> Mdcreate computes a checksum and puts it in the mdtab. When mdrunning a
> md partition, the checksum is computed and is compared to the one stored
> in the mdtab. If they're different, the md device isn't started.
Keith Beattie wrote:
>
> Severs? We don't need no stinkin' servers! Use multicast!
Nope. I need to use the 'off the shelf' Microsnot product.
> Seriously though, I'm not terribly familiar with all the functionality
> of netmeeting but at my first glance, it appeared to have taken quite
> a few h
Tim Sailer wrote:
> I was wondering if there was any software out there that would do
> the job of the microsoft ils servers that netmeeting use. We have
> a very small group that wants to set up a semi-private network
> and use netmeeting for documentation purposes..
>
Severs? We don't need no
Timothy Phan wrote:
>Hi,
>
> Has anyone done any benchmark/comparison between these databases?
>mSQL, MySQL, PostGres95
> in term of performance, application interfaces such as perl, tcl,
> and drivers such as odbc, jdbc, etc.
There have been some comparisons on the PostgreSQL m
Hi,
I've just reinstall the debian 1.3.1 and I apparently have missed
some setup somehow. How, the innxmit always give me this problem:
--8<
$ /usr/lib/news/bin/innxmit -d localhost /var/lib/news/batch.news.dhc.net.479
I was wondering if there was any software out there that would do
the job of the microsoft ils servers that netmeeting use. We have
a very small group that wants to set up a semi-private network
and use netmeeting for documentation purposes..
Tim
--
(work) [EMAIL PROTECTED] / (home) [EMAIL PROT
On Fri, 17 Oct 1997, Marcus Brinkmann wrote:
> > > #define AWE_DEFAULT_BASE_ADDR 0x620 /* base port address */
> > > #define AWE_DEFAULT_MEM_SIZE 4096 /* kbytes */
> > >
> > > Then it should work.
> >
> > Done, but I still get this with kernel 2.0.30: AWE32 Sound Driver v0.3.3e
> > (DRAM 286
According to Bruce Perens:
> The HP CDR drive was designed and manufactured by Philips. It has slightly
> different firmware. I'd suggest the Yamaha.
We always used the Yamaha 102 writer and worked fine for us.
This week we purchased the CDR400T (6x4) from Yamaha.
So far we have been unable to get
On Thu, 16 Oct 1997, Daniel J. Mashao wrote:
> I am looking for xload package and I don't know where it is?
It's in the xproc package.
> How can I find out where it is w/o having to waste bandwidth?
There are Contents.gz files in the same locations as the binary-i386-dirs
on every mirror.
> a
Dale Scheetz <[EMAIL PROTECTED]> writes:
> I have used Philips CDRs exclusively and have not been satisfied. For the
> usual reasons, I am replacing my current CDR and want something that will
> last a while. I can get an "HP SureStore CD-Writer 6020" for a
> "reasonable" price. I am curious if an
Torsten Hilbrich wrote:
> Another way:
>
> runvc false
>
> where runvc is the following script:
>
>#!/bin/sh
># Run something on a VC, from X, and switch back to X when done.
># GPL Joey Hess, Thu, 10 Jul 1997 23:27:08 -0400
>exec open -s -- sh -c "$* ; chvt `getvc`"
Hm,
On Fri, 17 Oct 1997, Lukas Eppler wrote:
> I am relatively new to linux. I am asking back: What is bad about one big
> partition? I have it like that, I am flexible as hell, and have no clear
> problems with it.
Well, if you wanted to export part of your drive (say /usr) to another
machine so t
On Fri, 17 Oct 1997 [EMAIL PROTECTED] wrote:
> My install Problems. ...
> Well IT DONT WORK!!
> How I installed it -
> ...
>- I did NOT have the packages.gz file.
This is the problem. Dselect needs to have a structure like this:
path/to/debian/basedir/
\__stable
\__binary-all
\__
Excuse my naivete, but won't printing a bunch of blank lines clear it?
Thanks
Bruce
--
Can you get your operating system fixed when you need it?
Linux - the supportable operating system. http://www.debian.org/support.html
Bruce Perens K6BP [EMAIL PROTECTED] NEW PHONE NUMBER:
The HP CDR drive was designed and manufactured by Philips. It has slightly
different firmware. I'd suggest the Yamaha.
Bruce
--
Can you get your operating system fixed when you need it?
Linux - the supportable operating system. http://www.debian.org/support.html
Bruce Perens K6BP [EMAIL
Dale Scheetz <[EMAIL PROTECTED]> writes:
> Isn't there a non-debian tarball of dpkg somewhere?
[...] Debian/project/experimental> ls -l dpkg*nondebbin*
-r--r--r-- 1 adminroot 555827 Oct 8 17:17
dpkg_1.4.0.19_alpha.nondebbin.tar.gz
-r--r--r-- 1 adminroot 459539 Jul 21 23:48
Hi,
I was wondering whether there is a system administration tool
which permits the monitoring of specified commands, file access attempts,
by users.
Thanks
George
--
On Thu, 16 Oct 1997, Bruce Perens wrote:
> Try unpacking the package, tarring up the result, and moving it to the
> slackware system that way. If it doesn't work, you might have to
> run autoconfig and build it from source under slackware.
>
> Be sure the /var/lib/dpkg directory gets bootstrapped
Hi,
Has anyone done any benchmark/comparison between these databases?
mSQL, MySQL, PostGres95
in term of performance, application interfaces such as perl, tcl,
and drivers such as odbc, jdbc, etc.
Thanks!
--
Timothy C. Phan ([EMAIL PROTECTED])
--
Sorry about that I'v gone brain dead again. I am looking for gated
but it was routed that I was thinking of and that's fine.
> I was looking for a daemon to do rip. It was in one of the net
> packages but I don't see it now. Very possible that I overlooked it.
>
>
I was looking for a daemon to do rip. It was in one of the net
packages but I don't see it now. Very possible that I overlooked it.
Chris
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTE
>From: "Marcelo E. Magallon" <[EMAIL PROTECTED]>
>Cc: debian-user@lists.debian.org
>
>On 16 Oct 1997, Pedro Quaresma de Almeida wrote:
>
>> test-list: :include:/var/lib/majordomo/lists/test
>>
>> it is not the correct one!?
>
>I think that's ok (don't take my word for this). But probably the
>con
On Fri, 17 Oct 1997 [EMAIL PROTECTED] wrote:
> As I have had some experience with slackware please all you
> ex slackers think what were your experience when switching to
> debian.
>
> * What are the major differences between Slackware
> and Debian?
Well, besides being better :)
Debian's
On Fri, 17 Oct 1997, Zsolt Varga wrote:
> ...could you help me,
> In this times, I have to install some virtual domain 'handler' to our mail
> server...
>
> at the moment it's running with Deb 1.3 and with sendmail 8.8.5
> is it hard to make virtual domain/virtual pop3 services with sendmail
Sen
Lukas Eppler <[EMAIL PROTECTED]> writes:
> I just wanted to remind you that libc6 is unstable and in development. So
> problems about it should go in [EMAIL PROTECTED] .
>
Thanks for the reminder. As I suspected, 99% of the problems I was
having with NIS were from misconfiguration of nsswitch.co
Hi,
I'm having this message when trying to mount an exported fs.
Both machines are Debian, running almost same versions.
Does somebody have a hint about this?
The fs was mounted once and work for long time. After the last
power fail I can't mount it anymore.
Richard A. Guay wrote:
>
> On 16-Oct-97 Lawrence wrote:
> > make sure you are in 256 colour mode, at first.
> >
>
> Are you saying that the jdk will not run in other graphics mode but 256
> colour?
> I sure hope that that is not the case.
>
It isn't. I run the jdk daily for my development wor
Mario Jorge Nunes Filipe wrote:
>Once again I'm here to talk about Postgres.
>
>It was suggested previously that a new package to exist should be
>created using libc6. But (and correct me if i'm wrong) libc6 will only
>be final with hamm, so it might make some sense to create a package
As for the problems with \special{landscape} not implemented in xdvi,
I think that the answer is in the configuration of teTeX. Run texconfig
and check that you have properly configured xdvi.
Hope it helps
--
**
Miguel A. Arranz
Dpt. of Economics
Univers
Hello ALL,
I have just joined this list. Hello to all you debian people.
I have just received my debian 1.3.1 CD and have had my
first try at installing it. ( Well it failled sob .. more on that later )
I have been running Slackware for several years now. However
I am no expert. I have
I bought a ASUS P55T2P4 recently and it came with Award BIOS v4.51, which
does allow booting off of SCSI devices (although I only have ide). You
might try going to Award's site and getting an upgrade.
cheers,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.4
Ulf,
Thanks for your reply. I have a 1.3.1 CD with xtetris on it, and since
I've upgraded to hamm fully, it's no longer available thru dselect. I
tried what you suggested, but xtetris wouldn't run at all, so I removed
it. I think it's odd to have packages available in dselect which have
depende
John Goerzen <[EMAIL PROTECTED]> writes:
> Hey everyone!
>
> Simple (hopefully) question. I've got an IDE drive on an Tyan
> motherboard with an Award BIOS. I recently went out and bought a
> Seagate Cheetah drive on a Symbios Logic (aka NCR) 53c875 host
> adapter (an AWESOME combination, BTW )
Dale Harrison <[EMAIL PROTECTED]> writes:
> ([EMAIL PROTECTED])$ xdvi
> /usr/X11R6/bin
> Error: XsraSelFile: can't get font 9x15
> Any ideas as to
>
> - Which 9x15 font it's looking for?
I assume the normal 9x15 from X. It is in the xfntbase package
Hi
Once again I'm here to talk about Postgres.
It was suggested previously that a new package to exist should be
created using libc6. But (and correct me if i'm wrong) libc6 will only
be final with hamm, so it might make some sense to create a package
still using libc5 and maybe another one with
hello everybody,
I've just installed the base system on my computer at home but
I don't have any ftp-connection or CD-drive in it.
But I've downloaded the stable/msdos-i386 packages to my
parallel Iomega-ZIP drive.
How can I install these packages with this?
thank you,
Antje
--
TO UNSUBSCRIBE
Will Lowe wrote:
> On Thu, 16 Oct 1997, Matt Thompson wrote:
>
> > that needed xforms. When I tried to install xforms from dselect, it said
> > I needed elf-x11r6lib, but that it doesn't appear to be available?
>
> gs-alladin depends on it, too, but I couldn't find it either.
This is a wrong
On Fri, Oct 17, 1997 at 12:48:55AM -0400, Damir J. Naden wrote:
> I have installed new mutt package compiled for libc5 (THANKS to Ray for
> keeping us with libc5 in mind!), ver. 0.84-0, and all was running fine
> so I deleted my old package 0.74-3. BUT, I didn't try to send an Email
> and sure enou
Hi,
It appears that in the default keyboard mapping for xfree86 (xkb
disabled), both the backspace key *and* the delete key are mapped to the
KeySym 'Delete'. Can someone tell me where this is being done?
I don't want these keys mapped.
In other words, I'd like the
delete key = keysym Delete
On Mon, 13 Oct 1997, Paul Miller wrote:
> How can I clear the scroll-back buffer when a use logs out (other than
> changing tty's)?
if you have SVGATextMode installed, executing 'stm' will do it.
-brad
- Free the West Memphis Three - http://www.pobox.com/~mms/wm3/
[EMAIL PROTECTED] - http://web
i had the same problem earlier today, so i fixed by just reinstalling
a bunch of packages (dpkg and the gang, perl, libc6). i think the one
that did was libc6. or maybe it was just a coincidence.
--alex--
--
| I believe the moment is at hand when, by a paranoiac and active |
| advance of the mi
On Thu, 16 Oct 1997 13:28:57 EDT Dale Scheetz ([EMAIL PROTECTED])
wrote:
> I have used Philips CDRs exclusively and have not been satisfied. For the
> usual reasons, I am replacing my current CDR and want something that will
> last a while. I can get an "HP SureStore CD-Writer 6020" for a
> "rea
On Thu, 09 Oct 1997 14:26:02 +0200 Pere Camps ([EMAIL PROTECTED])
wrote:
> I have a linear partition on my linux box (/dev/md0 =
> hdb7+hdb9+hdb11), and when I run the `mdadd -ar`, and I then mount the
> filesystem something like the following comes up:
>
> Warning: /dev/md0 has no
Hi,
I must have a problem with perl, I get the following error when trying
dselect with ftp:
Can't locate IO/Socket.pm in @INC at /usr/lib/perl5/Net/FTP.pm line 378.
BEGIN failed--compilation aborted at /usr/lib/perl5/Net/FTP.pm line 378.
BEGIN failed--compilation aborted at /usr/lib/dpkg/methods
Hello !
...could you help me,
In this times, I have to install some virtual domain 'handler' to our mail
server...
at the moment it's running with Deb 1.3 and with sendmail 8.8.5
is it hard to make virtual domain/virtual pop3 services with sendmail
or it's better to do with Qmail?
than
Hi, everybody --
I have installed new mutt package compiled for libc5 (THANKS to Ray for
keeping us with libc5 in mind!), ver. 0.84-0, and all was running fine
so I deleted my old package 0.74-3. BUT, I didn't try to send an Email
and sure enough that is the only function I can not get to work. I
Date: Mon, 13 Oct 1997 16:28:12 +0200
From: Thomas SCHIEX <[EMAIL PROTECTED]>
I'd like to know if anybody has experience in finely controlling the FPU
under Linux (I'm under Debian 1.3.1). I need to control the rounding mode of
the FPU (rounding up or down instead of "to nearest").
On Thu, 16 Oct 1997, Matt Thompson wrote:
> I have Netscape 4.03 (non-beta, full release) and it comes with it's own
> installer. Just download the file from:
[cut]
Yeah, I guess I'll just break down and do that.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAI
I have Netscape 4.03 (non-beta, full release) and it comes with it's own
installer. Just download the file from:
ftp://ftp9.netscape.com//pub/communicator/4.03/shipping/english/unix/linux20
/base_install (you can modify the url if you want something slightly
different, like navigator only)
...
Try unpacking the package, tarring up the result, and moving it to the
slackware system that way. If it doesn't work, you might have to
run autoconfig and build it from source under slackware.
Be sure the /var/lib/dpkg directory gets bootstrapped with something
sensible.
Thanks
B
R. Chris Ross wrote:
> For the past couple of weeks I have been using a package called
> MRTG.
It's already a debian package:
[EMAIL PROTECTED]:~>dpkg -s mrtg
Package: mrtg
Status: install ok installed
Priority: extra
Section: contrib/net
Installed-Size: 223
Maintainer: Dermot Bradley <[EMA
I'm trying to get the netscape 4 beta installer, but its doesn't seem to
be going well...
In dselect I did an Update, and cleared everything. So my list is up to
date. I selected the netscape beta package. Went to Install, and
then...nothing.
It won't find it during the install page. Doesn't
For the past couple of weeks I have been using a package called
MRTG. Both the current release and the beta for the next release are
running nicely, showing html graphic display of SNMP data. The package is
set up for monitoring network traffic but can be easily modified to monitor
other
On Thu, 16 Oct 1997, Matt Thompson wrote:
> that needed xforms. When I tried to install xforms from dselect, it said
> I needed elf-x11r6lib, but that it doesn't appear to be available?
gs-alladin depends on it, too, but I couldn't find it either.
Hello all. I have finally gottne nis setup on a few machines but nfs is
giving me problems. Basically what happens is when the client mounts the
server all ownerships are lost. I have tried using map_daemon in /etc/exports
of the server and running ugidd but to no avail. Has anyone gotten nis
hi, y'all,
I've upgraded to hamm across the board, and found that xmix doesn't work
anymore. (I even tried installing it from dselect and I get a
Segmentation fault both as mattyt and as root). So I found another mixer
that needed xforms. When I tried to install xforms from dselect, it said
I n
59 matches
Mail list logo
