i got the /etc/ppp/ip-up procedure to send me mail...which was from root
Date: Mon, 9 Mar 1998 16:09:58 -0700 (MST)
From: root [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
so, how do you tell fetchmail and procmail (running as a root daemon)
where to find the dotfiles in my home account??
(or do
I have two, I think related questions.
- How to install a ps/2 mouse. I have a /dev/psaux dev
crw-rw-rw- 1 root sys 10, 1
If I try to configure gpm -m /dev/psaux -t ps2
it says: no such device
Dear ZORO,
do you have ps2 mouse suport compiled into kernel or loaded as a module?
Hey...I've been trying for a few days now to get x windows to work, I tried
using XF86Setup to make my configuration file, but the graphics for it were
screwed up and unreadable...I then tried to use just XF86Config and created
an X configuration filehowever, when I tried to start x, the
On 09 Mar 1998 10:50:15 +0100, wrote:
Note that AFAIK all SMTP mailers (well, sendmail at least) will rewrite the
addresses in the mail headers. That includes rewriting a CNAME pointer to
the canonical name it points to.
If this is what ails my smail, then the vast majority of domains have
On Mon, 09 Mar 1998 19:29:44 EST, Taylen wrote:
Hey...I've been trying for a few days now to get x windows to work, I tried
using XF86Setup to make my configuration file, but the graphics for it were
screwed up and unreadable...I then tried to use just XF86Config and created
an X configuration
Sorry for posting this again, but I'm not sure if anyone answered me the
first time, since ml.org went all screwy right about the time I asked this
the first time..
I was reading through the passwd(5) man page, and I noticed something really
neat, you can set the priority at which the users
For a long time, since two days after I first installed a pre 1.3 debian
system, most of the icons in fvwm2 menus stopped working. Until the latest
afterstep, only root could get all the icons in afterstep, but the latest
afterstep improves this at least to some extent.
Is this a permissions
On Mon, 9 Mar 1998, David Stern wrote:
The correct way to solve this is to not use CNAMEs but to just set
up an extra A + MX record. Or perhaps just an MX record if all you're
using it for is mail.
I don't run sendmail, but what's going on sounds an awful lot like like
what I'm
Do the standard versions of the Debian kernel have IP forwarding and
and IP Masquerading compiled in? Is there an easy way to tell what's
in the kernel and what isn't? Also is there any easy way to tell the
version of the kernel image being used?
Thanks,
JEB
--
E-mail the word unsubscribe
On Mon, Mar 09, 1998 at 02:44:07PM -0300, Mario Olimpio de Menezes wrote:
Can I use the 2.0.33 deb package from hamm in a bo machine without
upgrade the whole system to hamm?
Yes.
Adam Klein
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING
I am trying to upgrade to amanda 2.4.0 on my network. One of the amanda
clients is a Debian 1.2 machine. This machine was working relatively
happily as an amanda 2.3 client.
I compiled amanda with --with-user=amanda --with-group=operator ,
which is the asm
PLEASE UNSUBSCRIBE ME FROM YOUR LIST!
I HAVE BEEN SPOOFED! I DID NOT SUBSCRIBE TO THIS LIST! THESE MESSAGES ARE
UNWELCOME!
THANK YOU!
At 08:44 PM 3/9/98 -0500, Norbert Veber wrote:
Sorry for posting this again, but I'm not sure if anyone answered me the
first time, since ml.org went all
SUMMARY: Has anyone created a business app in Linux/XWin (with something
like Tcl/Tk)? Read on for details.
Hi, my name is Jeff Alami; I am from Vancouver, Canada. At my workplace
we are considering upgrading our current systems and software (mainly
because we don't like the outsourced
When I run uname -a,I get a line like the following:
Linux glitch 2.0.33 #1 Thu Mar 5 17:47:54 CST 1998 i686 unknown
I was just curious what the unknown portion refers to. The man/info
page seems to indicate that the -a option is equivilent to -snrvm,
but when invoked in that fashion I
[ REQUEST FOR DEBIAN TESTING GROUP MEMBERS (for those who don't like humor)]
Greetings earthings.
A few months ago, I posted a request for people interested in the Debian
Testing Group. With the hamm freeze nearing, it's time to do that again.
- Do you enjoy running cutting edge software?
-
Hi all,
i'm expieriencing a problem when compiling different packages which use
Tcl/Tk. The problem is that make ends up with an error complaining about
a missing tcl.h and tk.h. The paths are set accordingly. Do i use the
wrong versions (Tcl7.6, Tk4.2, and all the runtime-libs)?
So i thought, it
At the first point of start Xwindows the Screen like
Linux (Bebian )
Login
Passward
at first time it look big size and I change the resolution by cntl+ alt+ +
the resolution become smaller again Cntl+
Markus Lechner [EMAIL PROTECTED] writes:
ML i'm expieriencing a problem when compiling different packages
ML which use Tcl/Tk. The problem is that make ends up with an error
ML complaining about a missing tcl.h and tk.h. The paths are set
ML accordingly. Do i use the wrong versions (Tcl7.6,
Thanks, this information helps a lot.
Note that if you build the source yourself, dpkg won't
know that you've installed tcl and will give you lots of dependency
errors. This is poor.
I wondered if there is a way to 'mimic' install/remove with dpkg?
Thanks,
Mac
--
E-mail the word
Hi all,
is there a way to tell dpkg to 'mimic' an install/remove of a given
package. For example, i removed a package by hand and want to tell dpkg
that this package can be 'removed'.
Mac
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble?
On Tue, 10 Mar 1998, Abou Anber wrote:
who can I fixed the resoltion of Xwindows at begining?
Your preferred resolution should be the first one listed.
down you will find my XF86Config.
...
Subsection Display
Depth 8
# Omit the Modes line for the Generic
Could you tell me where I can find drivers for YCL9542 PCI card
My addres is [EMAIL PROTECTED]
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED] .
On Tue, 10 Mar 1998, Markus Lechner wrote:
Thanks, this information helps a lot.
Note that if you build the source yourself, dpkg won't
know that you've installed tcl and will give you lots of dependency
errors. This is poor.
I wondered if there is a way to 'mimic' install/remove
Rich Puhek wrote:
If you go to /var/lib/dpkg, you will find a file called status. This
appears to be how dselect keeps track of what's
installed/configured/etc.
The format is pretty self explanitory, so you should be able to hack
the
status line of the package in question, fooling dselect
On Mon, 9 Mar 1998, Ian Keith Setford wrote:
I have a local lan connected to the Internet through a Pipe 50. The
domain I use is real but the domain is NOT routed on the internet right
now. I would like to use smail + pine to send messages. This setup is
currently working but I would like
Is this possible?
My ISP does not allow direct ftp any more. Ftp via lynx works if I use
his proxy , but I want to use ncftp and mc. Any hints or advice welcomed.
Lindsay
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Lindsay Allen [EMAIL PROTECTED] Perth,
On Mon, Mar 09, 1998 at 01:58:29PM -0600, Jeff Noxon wrote:
On Mon, Mar 09, 1998 at 02:01:10PM -0500, Ben Pfaff wrote:
I just installed Raima's Velocis Server 2.0 on an up-to-date hamm
machine. The binaries do not run (segfault), and when I run ldd I
get this:
This means that
We are running a LAN. E-mail clients are Win95 Eudora. Mail Server is a
Linux box running sendmail 8.8.8. We have a server in USA from where
external mail is routed to our linux box.
The problem is that even local mail is being routed to the USA server and
then coming to the respective mailbox,
[EMAIL PROTECTED] (Greg Norris) writes:
When I run uname -a,I get a line like the following:
Linux glitch 2.0.33 #1 Thu Mar 5 17:47:54 CST 1998 i686 unknown
I was just curious what the unknown portion refers to. The man/info
page seems to indicate that the -a option is equivilent to
-BEGIN PGP SIGNED MESSAGE-
Hello, fellow Debian users...
Does anybody know the reason why Sunsite is not mirroring
hamm stuff? It could be so much easier for the world to test
unstable versions with Sunsite involved...
- --
greetz... Arunas Norvaisa - little guy, The Masses Inc.
On Mon, 9 Mar 1998, T-SNAKE wrote:
I want to mostly start anew with my install, since I think during my software
install, I hit some wierd button accidentally and it FLEW through a bunch of
prompted questions and I think totally screwed sendmail... so I'm gonna start
over. BUT, I'm not sure
On Mon, 9 Mar 1998, Dr. Karl-Wilhelm Schulte wrote:
On Mon, Mar 09, 1998 at 05:33:18PM +0200, Daniel Mashao wrote:
I have set up a printer on a Debian Linux box and I have a tough time
# services of this machine. See lpd(8).
machinex.where.iam
machiney.where.iam
Thank you.
After running autoup.sh where do I point dselect to complete the hamm
upgrade from 1.3.1.
Thanks
Henry Hollenberg [EMAIL PROTECTED]
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED] .
Hi,
we have created a new list [EMAIL PROTECTED] This is not
for people who drive airplanes, but for the 3COM Pilot palmtop. GPL works
for it and there is some significant free software that can work with
Linux.
Subscribtion / Unsubscription
-
Our lists are served
Hi,
Yesteday our lists were attacked by some guy or program that
or who subscribes someone to 20 of our lists. We have noticed
this and taken care of it. It will happen again in the future
as we didn't find a mechanism to filter out these requests.
Instead we are able to detect them afterwards
Yep, that's it :-)
Many thanks.
Mac
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED] .
Hi,
I am a would be convert to the linux fraternity
and would like to try my hand at debian.
Would you tell me precisely which directory/ies
and file I have to down load using ftp to get DiD- Drop in Debian. Also I would
appreciate any relevant documentation regarding the same.
Regards.
Is there any way to format a Qic-80 tape on a ftape device? I don't
feel like rebooting to Win95 just to do this. I know I can use mt to
'erase' the tape but that just erases the header on the tape.
Thanks.
Brian
--
Mechanical Engineering [EMAIL PROTECTED]
On Tue, 10 Mar 1998, Henry Hollenberg wrote:
After running autoup.sh where do I point dselect to complete the hamm
upgrade from 1.3.1.
Where you first used stable, contrib and non-free, now use
dists/unstable/main, dists/unstable/contrib and
dists/unstable/non-free. The rest is the same.
On Tue, Mar 10, 1998 at 09:32:48AM +0100, [EMAIL PROTECTED] wrote:
On Mon, Mar 09, 1998 at 01:58:29PM -0600, Jeff Noxon wrote:
On Mon, Mar 09, 1998 at 02:01:10PM -0500, Ben Pfaff wrote:
I just installed Raima's Velocis Server 2.0 on an up-to-date hamm
machine. The binaries do not
Henry Hollenberg [EMAIL PROTECTED] writes:
After running autoup.sh where do I point dselect to complete the hamm
upgrade from 1.3.1.
This is not really appropriate for the developers list, so I have
dropped that list from the address.
From the Debian libc5 to libc6 Mini-HOWTO, by
On Tue, 10 Mar 1998, Daniel Mashao wrote:
On Mon, 9 Mar 1998, Dr. Karl-Wilhelm Schulte wrote:
On Mon, Mar 09, 1998 at 05:33:18PM +0200, Daniel Mashao wrote:
I have set up a printer on a Debian Linux box and I have a tough time
# services of this machine. See lpd(8).
On Tue, 10 Mar 1998, Ahmed Nelson wrote:
Hi,
I am a would be convert to the linux fraternity and would like to try my hand
at debian.
Would you tell me precisely which directory/ies and file I have to down load
using ftp to get DiD- Drop in Debian. Also I would appreciate any relevant
what is a image file?
in the inital boot medium, i use loadlin to boot install from a dos system.
i used the command:- loadlin linux root=dev/ram initrd=root.bin
but i got a error message of:-
not a image file
please enter name of kernel image file followed by optional commmand line
parametersf
Hi,
I am using pine (from the debian distribution), and I would like to know
how to set the return address (instead of the standard
[EMAIL PROTECTED]).
I have an alias on that machine which is the address I use most often, and
I would like my email to list that as the from address. Does
On Wed, 11 Mar 1998, Chris wrote:
I have an alias on that machine which is the address I use most often, and
I would like my email to list that as the from address. Does anyone know
how to do this?
If your username on the local machine is the same as the username in the
email address, then
prompted questions and I think totally screwed sendmail... so I'm
gonna start over. BUT, I'm not sure what the best way to proceed is.
Why not just de-install sendmail and then re-install it again. If you
de-install it you may see messages about x,not why not, etc. Ignore
those and just
Is there any way to format a Qic-80 tape on a ftape device? I don't
feel like rebooting to Win95 just to do this. I know I can use mt to
'erase' the tape but that just erases the header on the tape.
As far as I am aware then you can not use Linux to format these tapes, this
may of course
On 10 Mar, Graham Lillico +44 1785 248131 wrote:
Is there any way to format a Qic-80 tape on a ftape device? I don't
feel like rebooting to Win95 just to do this. I know I can use mt to
'erase' the tape but that just erases the header on the tape.
As far as I am aware then you can not
I know that this has been asked before, but please refresh my memory...
The default screen blanking is shutting off the X windows display preventing
the long term usage of the screen savers. How do I disable the console default
blanking so that I can use the screen savers instead? Thanks.
--
-=
- Do you want to use your computer for world domination?
Sorry to tell you, but it will be the penguins that will rule the
world through 'puters. :)
Woops, forget that last one, I've reserved it for myself. Basically, we
try the upgrade and base disk, see if the programs work, and
I am ready to install netscape on my system, but have a problem. The netscape
loader is for version 3.01. ftp.netscape.com only has version 3.04 or the
newer communicator 4.0x versions. Version 3.01 is not available. My system is
a bo (1.3.1) system. What can I do to get netscape installed?
--
Ftape-3.04d includes the ftformat command. I have installed it from
source, but there is now a .deb package, at least in hamm. The man page
indicates it will format QIC-80 tapes, but I haven't done that.
Bob
On Tue, 10 Mar 1998, Graham Lillico +44 1785 248131 wrote:
Is there any way to
tko,
setterm -blank 0
Steve Mayer
[EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
I know that this has been asked before, but please refresh my memory...
The default screen blanking is shutting off the X windows display preventing
the long term usage of the screen savers. How do I disable
On Tue, Mar 10, 1998 at 08:44:33AM -0600, Jeff Noxon wrote:
There is no rpath. This is a message I got back from their tech support
people. Can anyone think of a workaround? I hate to go back to bo.
-- cut here --
[...
However, because libpthread.0.5 and libpthread.0.6 cannot usefully
On Tue, 10 Mar 1998, T-SNAKE wrote:
prompted questions and I think totally screwed sendmail... so I'm
gonna start over. BUT, I'm not sure what the best way to proceed is.
Why not just de-install sendmail and then re-install it again. If you
de-install it you may see messages about x,not
Find a new ISP :)
Lindsay Allen wrote:
Is this possible?
My ISP does not allow direct ftp any more. Ftp via lynx works if I use
his proxy , but I want to use ncftp and mc. Any hints or advice welcomed.
Lindsay
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Is the version modutils-2.1.85 broken? I was told, by a technical
support guy, that this version had problems removing modules (which
I'm having), and he suggested to donwgrade to modutils-2.1.55.
--
Luiz Otavio L. Zorzella Product Engineer
[EMAIL PROTECTED]
I am using pine (from the debian distribution), and I would like to know
how to set the return address (instead of the standard
[EMAIL PROTECTED]).
Open Pine, go to Setup---Config and down to customized-headers. Hit A to
ADD and entry, the type what you would like your return address(reply-to
After struggling to downgrade some packages I needed to fix a
situation when I tried to upgrade w3-el, but cannot upgrade emacs to
version 20, I found several messages where the package emacs19 is
mentioned, as an alternative to emacs20.
But I can't seem to find this package anywhere! Is this
[EMAIL PROTECTED] writes:
I am ready to install netscape on my system, but have a problem. The netscape
loader is for version 3.01. ftp.netscape.com only has version 3.04 or the
newer communicator 4.0x versions. Version 3.01 is not available. My system is
a bo (1.3.1) system. What can I do to
Thanks for your comments!
I was able to fix the problem by installing libpthread.so.5 in a special
directory and use LD_LIBRARY_PATH.
Jeff
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED] .
After struggling to downgrade some packages I needed to fix a
situation when I tried to upgrade w3-el, but cannot upgrade emacs to
version 20, I found several messages where the package emacs19 is
mentioned, as an alternative to emacs20.
But I can't seem to find this package
Steve Mayer [EMAIL PROTECTED] writes:
tko,
setterm -blank 0
Steve Mayer
[EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
I know that this has been asked before, but please refresh my
memory... The default screen blanking is shutting off the X
windows display preventing the long
T-SNAKE [EMAIL PROTECTED] writes:
prompted questions and I think totally screwed sendmail... so I'm
gonna start over. BUT, I'm not sure what the best way to proceed is.
Why not just de-install sendmail and then re-install it again. If you
de-install it you may see messages about x,not
On Tue, 10 Mar 1998, Mark Phillips wrote:
I have debian installed on a single partition, a partition which
I suspect is greatly fragmented (is there an easy way to tell?). I wish
to use the program e2defrag to defragment it, but have realized this could
be more difficult than I first
hello everybody, I was wondering if anyone new of a good web interface for
the postgres database project. It does not look like Debian has one. Any
one have any ideas.
Paul
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL
On Tue, 10 Mar 1998, Paul McDermott wrote:
hello everybody, I was wondering if anyone new of a good web interface for
the postgres database project. It does not look like Debian has one. Any
one have any ideas.
php3 is a good one. version 3.0b6 is in hamm now. the pgsql module is in a
On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
On 10 Mar, Graham Lillico +44 1785 248131 wrote:
Is there any way to format a Qic-80 tape on a ftape device?
Sorry, I should have checked the HOWTO first, jeez...
4.8. Can I format my tapes under Linux?
No!
Actually, yes, the latest
GPL works
I mean GCC. I'm tired.
Bruce
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST. Trouble? E-mail to [EMAIL PROTECTED] .
On Mon, 9 Mar 1998, Corey Miller wrote:
I have an iomega JAZ (1GB) drive, using a SCSI card based around
the NCR53c406a chipset. I got everything (seemingly) working fine, but I
frequently get errors like the following whenever I read or write to the
drive. I only have the one disk that
Raymond A. Ingles wrote:
On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
On 10 Mar, Graham Lillico +44 1785 248131 wrote:
Is there any way to format a Qic-80 tape on a ftape device?
Sorry, I should have checked the HOWTO first, jeez...
4.8. Can I format my tapes under Linux?
Hello all
I'm still trying to get smail working like I want, but I think I am nearly
there thanks to all your help.
But I have another question.
How can I get my internet mail to my mail server from my isp's pop3 server, so
that my promailrc file will filter all my mail both internet and local,
On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
: Raymond A. Ingles wrote:
:
: On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
:
: On 10 Mar, Graham Lillico +44 1785 248131 wrote:
:Is there any way to format a Qic-80 tape on a ftape device?
:
: Sorry, I should have checked the HOWTO
Work-Needing and Prospective Packages for Debian GNU/Linux
[EMAIL PROTECTED]
$Id: prospective-packages.html,v 1.5 1998/03/10 17:53:12 johnie Exp $
This document is intended to identify areas that need your
contributions. It
On Tue, 10 Mar 1998, Graham Lillico +44 1785 248131 wrote:
How can I get my internet mail to my mail server from my isp's pop3 server, so
that my promailrc file will filter all my mail both internet and local, I am
currently using fetchmail to do this but it doesn't seem to use procmail so
On Tue, 10 Mar 1998, Paul McDermott wrote:
hello everybody, I was wondering if anyone new of a good web interface for
the postgres database project. It does not look like Debian has one. Any
one have any ideas.
Paul
There is a commercial package that I have used for our departmental web
Hi,
mfrattola == mfrattola [EMAIL PROTECTED] writes:
mfrattola Maybe I'm wrong, but doesn't this rewrite 'From' for every
mfrattola message, and not only for those 'going out' of his LAN?
mfrattola Also, doesn't confDELIVERY_MODE=queue queue all messages
mfrattola and wait for runq to
On Tue, 10 Mar 1998 23:10:10 +0800, kaiwei wrote:
what is a image file?
It's an image of a disk (each track is copied, even if empty). To
use it, you'll need the utility rawrite.exe, which can be found in
the /dosutils directory. Read the README file which accompanies it for
more info.
in
Hi!
there is a bug in kernel 2.0.33 which woes files' timestamp on mounted NT4
shares. There is already a bugfix patch, which seems to slip into 2.0.34.
kernel-source-2.0.33-2 didn't include this patch.
My questions:
-shall I report this as bug or wait till kernel-*-2.0.34?
-against what shall
I am new to Debian Linux and I would like to know the following:
Does Debian GNU/Linux have all the abilities of the GNU CC utilities
to cross compile to a Hitachi SH-1 microprocessor?
If so, do I need to jump through some hoops to get my code to the SH-1
On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
I am new to Debian Linux and I would like to know the following:
Does Debian GNU/Linux have all the abilities of the GNU CC utilities
to cross compile to a Hitachi SH-1 microprocessor?
If so, do I need to jump
Greetings,
i have recently purchased a Diamond Stealth II S220. i was wondering what
x-server to use. I've tried a few from the debian site but to no avail.
If it is elsewhere, i would appreciate the site's address. It has 4MB
SGRAM and RAMDAC of 170MHz and a Rendition Verite V2100
Scott Responded:
Debian does not come with cross-compiling tools, since it is
impossible to anticipate the cross-compiling needs of our users.
You will have to build a cross-compiling system yourself, the gcc
and binutils packages from your favorate gnu mirror
On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
Sorry, I should have checked the HOWTO first, jeez...
4.8. Can I format my tapes under Linux?
No!
That applies to the version of ftape which is included in the kernel.
ftape-3.04d, which is installed as modules, has this capability.
On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
Scott Responded:
Debian does not come with cross-compiling tools, since it is
impossible to anticipate the cross-compiling needs of our users.
You will have to build a cross-compiling system yourself, the gcc
On Tue, 10 Mar 1998 [EMAIL PROTECTED] wrote:
I am ready to install netscape on my system, but have a problem. The netscape
loader is for version 3.01. ftp.netscape.com only has version 3.04 or the
newer communicator 4.0x versions. Version 3.01 is not available. My system is
a bo (1.3.1)
On Tue, 10 Mar 1998, Graham Lillico +44 1785 248131 wrote:
Hello all
I'm still trying to get smail working like I want, but I think I am nearly
there thanks to all your help.
But I have another question.
How can I get my internet mail to my mail server from my isp's pop3 server, so
My hamm system crashed and burned yesterday
the problem was related to an accidently installe dpackage not
unmounting filesystems properly on reboot
in any case
today I re-installed. I installed bo then I upgraded to hamm
via autoup.sh and the CD I burned on 3-4-98
then of course
Hi,
In the last few weeks I have been receiving the following message in
syslog with increasing frequency
Mar 10 22:19:46 garfield kernel: eth0: Oversized Ethernet frame spanned
multiple buffers, status 7fffceff!
I have been told that this is normal and should not worry me. However,
as the
I wondered if there is a way to 'mimic' install/remove with dpkg?
Thanks,
Mac
If you go to /var/lib/dpkg, you will find a file called status. This
appears to be how dselect keeps track of what's installed/configured/etc.
The format is pretty self explanitory, so
On Wed, 11 Mar 1998, Chris wrote:
I am using pine (from the debian distribution), and I would like to know
how to set the return address (instead of the standard
[EMAIL PROTECTED]).
I've had luck putting From: ... in my custom header of my pine config. I
believe I had to tell pine I'm
On Tue, 10 Mar 1998, Graham Lillico +44 1785 248131 wrote:
currently using fetchmail to do this but it doesn't seem to use procmail so
You want to get the mail filtering FAQ.
From the FAQ:
FAQ-launcher-URLs:
http://www.jazzie.com/ii/faqs/archive/mail/filtering-faq/
Hi,
mfrattola == mfrattola [EMAIL PROTECTED] writes:
Hi, mfrattola == mfrattola [EMAIL PROTECTED] writes:
mfrattola Am I right in thinking local is used only for localhost
mfrattola bound mail? Where does all this magic come from? Do I have
mfrattola to hand edit sendmail.conf by hand? (any m4
94 matches
Mail list logo
