I'm running two debian 2.2 computers on a box on a network connected to
the Internet via a router.
I can telnet in from the outside to both boxes just fine.
I can telnet from box a to box b without problem, but I can't telnet from
box b to box a (or ssh).
In addition, the webmin monitoring
I've decided to buy a PC with Debian Preinstalled. Should I go with
Stable Woody or Development Sarge?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Sep 20, 2004 at 03:19:33PM -0400, Scott Mohnkern wrote:
...
I can telnet from box a to box b without problem, but I can't telnet from
box b to box a (or ssh).
...
Any ideas?
What does traceroute show?
--
Carl Fink [EMAIL PROTECTED]
Jabootu's Minister of
So the solution is to not set a gateway for eth0 and
eth1, but only set
it for bond0?
Yes,
But you also could have gw for your eth's cards, but
you must assure that those routes do not supercede the
bond0.
I am not sure that I understand what you mean by supersede.
The only gateway I have is
--- [EMAIL PROTECTED] wrote:
I've decided to buy a PC with Debian Preinstalled.
Should I go with
Stable Woody or Development Sarge?
I installed stable woody from purchased CD's (which is
what you will be buying) and have been able to upgrade
it to Sarge status by recompiling the source
#secure method=pgp mode=sign
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
S.D.A. [EMAIL PROTECTED] writes:
BTW Flash technology is OPEN Source, it's NOT proprietary. Too much is said
that's not accurate regarding Flash.
You're going to have to back that up. Last I checked, Macromedia held
#secure method=pgp mode=sign
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[EMAIL PROTECTED] writes:
I've decided to buy a PC with Debian Preinstalled. Should I go with
Stable Woody or Development Sarge?
I'd say you're safe with either right now. You'll probably want Sarge
because it's not
traceroute ***
traceroute: Warning: findsaddr: error sending netlink message: Connection
refuse
d
traceroute: Warning: ip checksums disabled
traceroute to ** (**), 30 hops
max, 38 byte packets
1 *
I've got a iMac running Sid that I want to connect to a home network via
wireless. Can someone recommend a USB network adaptor?
Thanks,
Jeff Elkins
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Sep 20, 2004 at 12:54:39PM -0700 or thereabouts, Paul Johnson wrote:
#secure method=pgp mode=sign
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
S.D.A. [EMAIL PROTECTED] writes:
BTW Flash technology is OPEN Source, it's NOT proprietary. Too much is said
that's not accurate
On Mon, 2004-09-20 at 19:47, Tim Kelley wrote:
So we shouldn't purge the mail queue and hints database? Since policy
requires a purged package to vanish without leaving any trace of its
installation, that would be a policy violation.
Huh? There is no such policy. The policy defines purge
Ok, send the
shell~#route -n
output...
On Mon, 20 Sep 2004 22:21:58 +0200, Jacob Larsen wrote:
So the solution is to not set a gateway for eth0 and
eth1, but only set
it for bond0?
Yes,
But you also could have gw for your eth's cards, but
you must assure that those routes do
Sergio Basurto wrote:
Ok, send the
shell~#route -n
output...
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse
Iface
81.7.167.2240.0.0.0 255.255.255.240 U 0 00 eth0
81.7.167.2240.0.0.0
move from your routing table, the entries for your
eth's cards.
route del ...
On Mon, 20 Sep 2004 23:15:45 +0200, Jacob Larsen wrote:
Sergio Basurto wrote:
Ok, send the
shell~#route -n
output...
# route -n
Kernel IP routing table
Destination Gateway Genmask
Sergio Basurto wrote:
move from your routing table, the entries for your
eth's cards.
route del ...
I am not sure I know what to do. If I do something wrong I have to drive
60km to fix it :)
# route del ?
Please help.
Thanks,
Jacob
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Parallel ports generate an interrupt (and so a context switch) for every
byte that goes out, the hardware provides no buffering as serial ports do
(and for some reason, the industry never saw the need).
In NT/XP, MS supports parallel ports grudgingly and encourage you to invest
in a USB
ok,
#route del -net 87.7.167.224 netmask 255.255.255.240
eth0
#route del -net 87.7.167.224 netmask 255.255.255.240
eth1
then run
#route -n
and the output should not have the eth's entries.
#ip neigh show
and send the output
On Mon, 20 Sep 2004 14:19:03 -0700 (PDT), Sergio
Basurto wrote:
This is what I got. Which package do I need for ip neigh show?
# route del -net 87.7.167.224 netmask 255.255.255.240 eth0
SIOCDELRT: No such process
# route del -net 87.7.167.224 netmask 255.255.255.240 eth1
SIOCDELRT: No such process
# route -n
Kernel IP routing table
Destination Gateway
On Mon, Sep 20, 2004 at 05:42:30PM -0400, Icebiker wrote:
In NT/XP, MS supports parallel ports grudgingly and encourage you to invest
in a USB device. I imagine it's the same for Linux.
Just as an aside, NT certainly does nothing of the kind, as it has no clue
what USB is.
--
Marc Wilson |
On Mon, Sep 20, 2004 at 10:58:52AM -0700, Ross Boylan wrote:
Originally I was using lpd in the lpr package. With that, lpd showed
as the CPU consumer. I just switched to CUPS; now parallel:/dev/lp0
shows as the CPU consumer. My guess is that it was before, but the
time was just being
iproute2 under debian : #apt-get install iproute
and try
#route del -host 87.7.167.224 eth0
#route del -host 87.7.167.224 eth1
On Tue, 21 Sep 2004 00:02:29 +0200, Jacob Larsen wrote:
This is what I got. Which package do I need for ip
neigh show?
# route del -net 87.7.167.224 netmask
On Monday 20 September 2004 17:07, Marc Wilson wrote:
Uh, that's a CUPS back-end, not the hardware directly. The port itself
cannot consume CPU. Well, it can, but not in the sense that you mean.
In what way do *you* think it can consume CPU?
--
Kirk Strauser
pgpSLMRaidtRT.pgp
Description:
Sorry, that was written before I installed 0.8-2 ... everything is now
working properly.
Cheers,
Adam.
Alexander Sack wrote:
Adam Bogacki wrote:
Sorry to be a spoil-sport but when replying (TB0.8) to an email I
found the Compose' pane stuck one third of the way down the screen,
and the written
On Sunday 19 September 2004 10:53 am, Nicolas de Sereville wrote:
Following the ATI Radeon Linux How-To, I managed to get the 3D
acceleration with the previous xserver version (4.3.0.dfsg.1-6) but
overwriting the MESA libGL library with the ATI one, through a dpkg
--force-overwrite -i
Sergio Basurto wrote:
#route del -host 87.7.167.224 eth0
#route del -host 87.7.167.224 eth1
# route del -host 87.7.167.224 eth0
SIOCDELRT: No such process
# route del -host 87.7.167.224 eth1
SIOCDELRT: No such process
# ip neigh show
81.7.167.225 dev bond0 lladdr 00:d0:00:e4:fc:0a nud reachable
I
Hi,
Rob Sims wrote:
On Sunday 19 September 2004 10:53 am, Nicolas de Sereville wrote:
Following the ATI Radeon Linux How-To, I managed to get the 3D
acceleration with the previous xserver version (4.3.0.dfsg.1-6) but
overwriting the MESA libGL library with the ATI one, through a dpkg
On Mon, Sep 20, 2004 at 07:50:53PM +0200, Sven Hoexter wrote:
On Sun, Sep 19, 2004 at 05:30:24PM -0700, Stefan O'Rear wrote:
On Sun, Sep 19, 2004 at 05:20:50PM -0700, Cole S. Ashcraft wrote:
Is there an updated version of glibc (2.3) and gcc for woody?
Thanks,
Cole
There is no
[EMAIL PROTECTED] wrote:
I've decided to buy a PC with Debian Preinstalled. Should I go with
Stable Woody or Development Sarge?
Which PC?
Why not build a PC, buy the 14CD's and install Sarge?
Sarge, definitely. But why not wait until Sarge is stable? Then you
won't have to upgrade...
Hugo.
--
On Mon, Sep 20, 2004 at 05:13:05PM -0500, Kirk Strauser wrote:
On Monday 20 September 2004 17:07, Marc Wilson wrote:
Uh, that's a CUPS back-end, not the hardware directly. The port itself
cannot consume CPU. Well, it can, but not in the sense that you mean.
In what way do *you* think
On Mon, Sep 20, 2004 at 12:01:11PM -0500, helices wrote:
What broke? What changed?
I have been running 2.6x kernels on this legacy PPro box for most of
this year -- first kernel-image-2.6.2-1-686, then
kernel-image-2.6.6-2-686 -- without incident.
Today, the only change I made was to
Sid is the testing kernel and is more advanced than
Sarge and will cause you problems; stay away from
that one.
I would disagree. For a production machine definitely but maybe not a
desktop machine. I have run unstable without any problems for 18 months.
Maybe I've been lucky but debian in
On Mon, Sep 20, 2004 at 05:13:05PM -0500, Kirk Strauser wrote:
On Monday 20 September 2004 17:07, Marc Wilson wrote:
Uh, that's a CUPS back-end, not the hardware directly. The port itself
cannot consume CPU. Well, it can, but not in the sense that you mean.
In what way do *you* think
I have been wanting to get a DVD-RW drive and recently someone suggested
I get an external drive, which I had never thought of. It will be more
expensive than an internal drive, but I could use it on all of my
computers to backup data, with less hassle than an internal drive. Also,
I might be
martin f krafft wrote:
Every now and then, coincidence will have it that 10 or 20 users
invoke spamassassin at the same time. Spamassassin is a resource
hog and that will cause the machine to basically become unusable,
with the load going to 30 and higher.
Obviously, I have put limits on
On Mon, Sep 20, 2004 at 08:22:13PM -0400, Adam Aube wrote:
martin f krafft wrote:
Every now and then, coincidence will have it that 10 or 20 users
invoke spamassassin at the same time. Spamassassin is a resource
hog and that will cause the machine to basically become unusable,
with the
Is there a way to install / upgrade to sarge from a debian box running
woody without using apt-get? I have glibc2.3 instsalled.
Cole
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Sep 20, 2004 at 05:59:29PM -0700, Cole S. Ashcraft wrote:
Is there a way to install / upgrade to sarge from a debian box running
woody without using apt-get? I have glibc2.3 instsalled.
Yes.
Download the sarge netinst ISO.
Burn it to CD.
Back up all your data.
Turn off computer.
Stefan O'Rear wrote:
How about a serializing wrapper?
Now, if you make the script NOPASSWD sudo -u sa_learn able, and make
sa_learn only executable by user sa_learn, only one will be running at a
time.
Or you could make the script setGID, then remove world read and execute
rights on the
Hi all,
*Very* new Debian user here, first install ever, though I was surprised at how
easy it was, even though I chose to install from floppies over the internet.
That's pretty cool!
Anyhow, stupid question number one: I would like to have the system boot to a
text mode login, but I cannot
On Mon, Sep 20, 2004 at 09:13:55PM -0400, JoeHill wrote:
Hi all,
*Very* new Debian user here, first install ever, though I was surprised at how
easy it was, even though I chose to install from floppies over the internet.
That's pretty cool!
Anyhow, stupid question number one: I would
On Mon, Sep 20, 2004 at 08:19:27AM -0400, S.D.A. wrote:
On Sun, Sep 19, 2004 at 07:54:13PM -0400 or thereabouts, Michael Marsh wrote:
On Sun, 19 Sep 2004 18:43:07 -0400, Carl Fink [EMAIL PROTECTED] wrote:
Well, the most obvious is flashblock.
I don't think that's what Pigeon had in
On Monday 20 September 2004 07:29 pm, Ross Boylan wrote:
I'm not sure who *you* means, but my original thought was that the
device driver associated with the port might be using a lot of CPU
cycles.
I think that's exactly what's happening, and I was curious as to why
others thought that it
On Mon, 20 Sep 2004 18:36:30 -0700, Stefan O'Rear [EMAIL PROTECTED] wrote:
On Mon, Sep 20, 2004 at 09:13:55PM -0400, JoeHill wrote:
Anyhow, stupid question number one: I would like to have the system boot to a
text mode login, but I cannot find where to make the change in any of the system
On Mon, Sep 20, 2004 at 09:09:27AM -0400, S.D.A. wrote:
On Mon, Sep 20, 2004 at 08:54:09AM -0400 or thereabouts, Michael Marsh wrote:
That's true -- I wasn't aware of that. However, that doesn't address
the issue that some people don't run Flash for one reason or another.
Most of us have
On Mon, 20 Sep 2004 18:36:30 -0700
Stefan O'Rear disseminated the following:
Anyhow, stupid question number one: I would like to have the system boot to
a text mode login, but I cannot find where to make the change in any of the
system administration tools. I plan to (try) to admin the
Doh, you are absolutely right, I meant XP.
/icebiker
- Original Message -
From: Marc Wilson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, September 20, 2004 18:06
Subject: Re: parallel port using lots of CPU
On Mon, Sep 20, 2004 at 05:42:30PM -0400, Icebiker wrote:
In NT/XP, MS
On Tue, 2004-09-21 at 11:59, Michael Marsh wrote:
On Mon, 20 Sep 2004 18:36:30 -0700, Stefan O'Rear [EMAIL PROTECTED] wrote:
On Mon, Sep 20, 2004 at 09:13:55PM -0400, JoeHill wrote:
Anyhow, stupid question number one: I would like to have the system boot to a
text mode login, but I cannot
On Monday 20 September 2004 19:02, robin wrote:
Sid is the testing kernel and is more advanced than
Sarge and will cause you problems; stay away from
that one.
I would disagree. For a production machine definitely but maybe not a
desktop machine. I have run unstable without any problems for
On Mon, Sep 20, 2004 at 08:50:36PM -0500, Kirk Strauser wrote:
On Monday 20 September 2004 07:29 pm, Ross Boylan wrote:
I'm not sure who *you* means, but my original thought was that the
device driver associated with the port might be using a lot of CPU
cycles.
I think that's exactly
On Monday 20 September 2004 10:09 pm, Ross Boylan wrote:
Mine says
parport0: Printer, Lexmark International Lexmark Optra E310
lp0: using parport0 (polling).
parport0: PC-style at 0x378 [PCSPP]
I don't really know what that means, but it apparently has no
interrupts and there's no
* Stefan O'Rear [EMAIL PROTECTED] [2004:09:20:16:02:59-0700] scribed:
On Mon, Sep 20, 2004 at 12:01:11PM -0500, helices wrote:
What broke? What changed?
I have been running 2.6x kernels on this legacy PPro box for most of
this year -- first kernel-image-2.6.2-1-686, then
Selon Andrea Vettorello [EMAIL PROTECTED]:
On Sat, 18 Sep 2004 10:08:33 -0400, Jean-Francois Lefebvre
[EMAIL PROTECTED] wrote:
Hi.
I'm using Debian since 2 weeks, and so far I'm happy with it. But there's
one
problem. I have an ATI Radeon 9000 graphic card, and still when a GL
On Tue, Sep 21, 2004 at 03:06:06AM +0100 or thereabouts, Pigeon wrote:
[...]
There is another issue that I can see with flash (and please correct
me if I'm not accurate :-) ) which is the monolithic, binary nature of
the files - in fact this leads to two issues:
snip for space
You're quite
hi thanks for the reply,
but why is this module-init-tools required?
Raghavendra Bhat wrote:
Vijaya
need 2.4.18 kernel in particular..Is it possible to have that also
after having a higher version
Yes, it is possible. Both can exist peacefully.
Kernel v2.6.x requires you to have
Thomas Hood wrote:
Only a buggy driver (or other kernel component) can make the whole system
hang.
I have tried to reinstall the kernel altogether, but the problem
persists. Where else can I dig? What about the loadable modules? Can I
try checking something there? How can I do it? I can just add
I have small network, two windows 2000 boxes and a debian box. The
two windows machines share a laser printer that is attached to one of
them. I'd like to be able to print from the debian machine too. Can
anybody give me a pointer on how to get that working?
thanks
Christian
--
To
hi all,
i logged into another machine via ssh and while ediitng using mutt for
some reason my network went down..
how do i go to the remote machinea nd save the file which i edited..The
remote machine is accessible..
Regards,
Vijaya
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
On Tuesday 21 September 2004 08:17, Christian Benito wrote:
I have small network, two windows 2000 boxes and a debian box. The
two windows machines share a laser printer that is attached to one of
them. I'd like to be able to print from the debian machine too. Can
anybody give me a pointer on
501 - 558 of 558 matches
Mail list logo
