On Sun, Jan 17, 2010 at 01:41:22AM +0100, Jean-Christophe Valiere wrote:
Salut,
Est-ce que quelqu'un est au courant du statut du mode multipath de
mdadm.
J'envisageais de faire un test DRBD + iSCSI + MDADM en mode
multipath + OCFS2 pour faire un espèce SAN ?
J'ai vu une
Grégory Bulot debian.l...@batman.dyndns.org à écrit le Mon, 2 Feb
2009 10:46:15 +0100
bonjour,
Ayant besoin d'un portable, j'ai récupéré un vieux vaio Piii
la résolution 1280x1024 (après beaucoups de tâtonnement) : occupe la
presque totalité de la dalle (manque 5mm sur les bords latéraux
On 17/01/2010 07:57, Jean-Yves F. Barbier wrote:
Les performances seront inférieures (puisqu'il va y avoir maintenant une
écriture de plus), la sécurité augmente d'un disque (de la même manière
qu'avec l'ajout d'un HD de spare en RAID-5, mais avec le coût temps+CPU en
sus.)
(ouf, il n'a pas trop parlé d'art !)
Pourquoi ? C'est mal quand il parle d'art ?
Ce que j'ai compris aux dernière RMLL, à propos de l'art :
Il y a semble-t-il une volonté de certains artistes de rejoindre le
mouvement copyleft, avec les Creative Commons, notamment...
J'étais présent lors de
Le Sunday 17 Jan 2010 à 07:57:32 (+0100), Jean-Yves F. Barbier a écrit :
Les performances seront inférieures (puisqu'il va y avoir maintenant une
écriture de plus), la sécurité augmente d'un disque (de la même manière
qu'avec l'ajout d'un HD de spare en RAID-5, mais avec le coût temps+CPU en
Le Sat, 16 Jan 2010 22:40:02 +0100, Thierry Chatelet a écrit :
Je n' ai pas de solution directe, mais si tu crée un nouvel utilisateur
et lance une impression; ça donne quoi? C'est une façon de partager en 2
la recherche de problème.'utilisateur ou système.)
Thierry
désolé pour ma réponse un
Grégory Bulot debian.list200...@batman.dyndns.org à écrit le Sun, 17
Jan 2010 12:17:45 +0100
après un full-upgrade, les marges ont été réduites mais maintenant il
y a un décalage entre le pointeur souris, et le clic rendu
(X~30pixels, Y~5pixels)
je suis tombé sur un fil de discussion qui
Salut,
Fanfan a écrit :
Dit autrement, il me semble qu'en RAID5, on peut reconstituer une erreur
sur un disque si on dispose des N-1 autre disques, quelque soit l'erreur
(sur une information de correction ou sur une donnée), alors qu'en
RAID6, on peut reconstituer plusieurs erreurs de
El Sat, 16 Jan 2010 23:29:00 -0500
Ricardo Adolfo Sánchez Arboleda rasa996...@gmail.com va dir:
Hey lista cuando hago esto
:~# X -configure
eso te genera en tu /root/xorg-conf-new (creo)
lo copias como /etc/X11/xorg.conf
me sale esto:
Fatal server error:
Server is already active for
Buenas,
On Fri, Jan 15, 2010 at 12:49:07PM -0500, Walber Zaldivar Herrera wrote:
Hola:
A mi no se me ocurriría preguntar por esto, pero un amigo me puso la
idea y yo la comparto.
Cómo convencer a los **Órganos de Seguridad** de un país X (pienso
en Cuba, porque es lo que me toca, pero
El día 17 de enero de 2010 11:25, ga g...@kutxa.homeunix.org escribió:
Buenas,
Yo igual replantearía la pregunta (con tu permiso): ¿Hasta qué punto son
auditables las fuentes originales que son empaquetadas como .deb?
+1
Digo esto, porque leyendo tu email he recordado, que hace unos años
El Fri, 15 Jan 2010 19:40:24 -0400, Gary Ariel Sandi Vigabriel escribió:
Buenas tengo un server configurado con Bind9 y a su vez apache2 para
servir ambos a la vez y hacer Virtualhosts con apache para diferentes
dominios.
Me parece que bind9 no es necesario para que el apache2 sirva dominios
Felix Perez escribió:
El día 17 de enero de 2010 11:25, ga g...@kutxa.homeunix.org escribió:
Buenas,
Yo igual replantearía la pregunta (con tu permiso): ¿Hasta qué punto son
auditables las fuentes originales que son empaquetadas como .deb?
+1
Digo esto, porque leyendo tu email he
El Fri, 15 Jan 2010 23:00:58 +0100, Antonio Trujillo Carmona escribió:
Estoy montando un servidor con dos tarjetas de red para virtualización.
La lógica de los servidores me dice que use ifenslave para tener
redundancia (seguridad y multipath) en la red, pero para kvm hay que
poner las
El sáb, 16-01-2010 a las 09:16 -0400, Gary Ariel Sandi Vigabriel
escribió:
Pues no toque nada, de repente paso, la configuración es esta:
named.conf.local
zone ejemplo.com{
notify no;
type master;
file /etc/bind/zones/master/db.ejemplo.org;
};
Pues intenta añadir lo siguiente a la zona
Hola Lista!!
Uso estos dos programas para programar actividades.
Y deseo que las notas emergentes avisen un deteminado tiempo
precedente a la cita.
Todo funciona si los dos
programas en cuestion han sido previamente iniciados
durante_la_sesión y funciona aun cuando los cierre durante la misma.
On Sun, Jan 17, 2010 at 03:25:43PM +0100, ga wrote:
On Fri, Jan 15, 2010 at 12:49:07PM -0500, Walber Zaldivar Herrera wrote:
Hasta que punto es auditable que el .deb que descargamos coincida
100% con el código fuente publicado?
[Un paquete upstream podría añadir un backdor entre
Buenas,
On Sun, Jan 17, 2010 at 10:29:50AM -0800, Rodrigo Gallardo wrote:
On Sun, Jan 17, 2010 at 03:25:43PM +0100, ga wrote:
On Fri, Jan 15, 2010 at 12:49:07PM -0500, Walber Zaldivar Herrera wrote:
Hasta que punto es auditable que el .deb que descargamos coincida
100% con el
El vie, 15-01-2010 a las 21:34 -0300, deb...@mstaaravin.com.ar escribió:
2010/1/15 Antonio Trujillo Carmona tr...@dti2.net:
Estoy montando un servidor con dos tarjetas de red para virtualización.
La lógica de los servidores me dice que use ifenslave para tener
redundancia (seguridad y
El dom, 17-01-2010 a las 16:11 +, Camaleón escribió:
El Fri, 15 Jan 2010 23:00:58 +0100, Antonio Trujillo Carmona escribió:
Estoy montando un servidor con dos tarjetas de red para virtualización.
La lógica de los servidores me dice que use ifenslave para tener
redundancia (seguridad y
El Sun, 17 Jan 2010 13:07:05 -0500, Laura Pamela escribió:
(...)
Como cargo el demonio de ambos programas para que se carguen el arranque
del sistema y las notas de aviso de citas emerjan aun sin haber lanzado
previamente estos
dos útiles programas?
¿Necesitas que se carguen *los dos*
Hola,
Estoy pensando en usar el repositorio de Backports en Lenny dado que
Iceweasel ya no va a recibir más parches de seguridad por parte de Debian
(ya lo avisaban en las Notas de la Versión¹) y Mozilla ha dicho² que ya
no va a proporcionar más parches de seguridad para la rama 3.0.x a partir
2010/1/17 Antonio Trujillo Carmona tr...@dti2.net:
Creo que esta vez te has colao,
Yo no creo, no tengo dudas, sos un pelotudo
no suelo preguntar lo que soy capaz de
probar, y mucho menos nada que me pueda dar el manual o los doc del
paquete, lo que pasa es que no siempre que buscas algo
El dom, 17-01-2010 a las 20:26 +, Camaleón escribió:
Hola,
Estoy pensando en usar el repositorio de Backports en Lenny dado que
Iceweasel ya no va a recibir más parches de seguridad por parte de Debian
(ya lo avisaban en las Notas de la Versión¹) y Mozilla ha dicho² que ya
no va a
El Sun, 17 Jan 2010 22:38:11 +0100, mariodebian escribió:
El dom, 17-01-2010 a las 20:26 +, Camaleón escribió:
Estoy pensando en usar el repositorio de Backports en Lenny dado que
Iceweasel ya no va a recibir más parches de seguridad por parte de
Debian (ya lo avisaban en las Notas de la
Gracias Camaleon por responder
¿Necesitas que se carguen *los dos* programas? Si ambos hacen lo mismo
(recordatorio de citas, calendarios, eventos, tareas, etc...) ¿no? :-?
En verdad no los necesito ambos.
A mi me sirve perfectamente evolution.
Pero deseo que los compañeros de la oficina de
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Camaleón escribió:
El Fri, 15 Jan 2010 19:40:24 -0400, Gary Ariel Sandi Vigabriel escribió:
Buenas tengo un server configurado con Bind9 y a su vez apache2 para
servir ambos a la vez y hacer Virtualhosts con apache para diferentes
dominios.
El día 17 de enero de 2010 15:49, ga g...@kutxa.homeunix.org escribió:
Buenas,
On Sun, Jan 17, 2010 at 10:29:50AM -0800, Rodrigo Gallardo wrote:
On Sun, Jan 17, 2010 at 03:25:43PM +0100, ga wrote:
On Fri, Jan 15, 2010 at 12:49:07PM -0500, Walber Zaldivar Herrera wrote:
Hasta que
El Sun, 17 Jan 2010 21:26:39 -0430, Hector Colina escribió:
Camaleón escribió:
El Fri, 15 Jan 2010 19:40:24 -0400, Gary Ariel Sandi Vigabriel
escribió:
Buenas tengo un server configurado con Bind9 y a su vez apache2 para
servir ambos a la vez y hacer Virtualhosts con apache para diferentes
El Sun, 17 Jan 2010 19:15:56 -0500, Laura Pamela escribió:
Gracias Camaleon por responder
¿Necesitas que se carguen *los dos* programas? Si ambos hacen lo mismo
(recordatorio de citas, calendarios, eventos, tareas, etc...) ¿no? :-?
En verdad no los necesito ambos.
A mi me sirve
Hej!
Jag försökte rensa systemet och få bort allt som är helt onödigt.
Men när jag kom till libthai0 och libthai-data fanns det ingen möjlighet
att bli av med de utan att hela systemet skulle avinstalleras.
Hur kommer det sig att allt verkar vara beroende till just sådant,
alltså program och
Hej!
On 2010-01-17 23:13, h-r wrote:
Hej!
Jag försökte rensa systemet och få bort allt som är helt onödigt.
Men när jag kom till libthai0 och libthai-data fanns det ingen möjlighet
att bli av med de utan att hela systemet skulle avinstalleras.
Hur kommer det sig att allt verkar vara
Καλημέρα,
έχω το εξής πρόβλημα σε μια φρέσκια εγκατάσταση του 5.0.3 (κατά την
εγκατάσταση διάλεξα ως χώρα την Ελλάδα αλλά ως γλώσσα τα αγγλικά): όταν πάω
να προσθέσω και την ελληνική γλώσσα στο πληκτρολόγιο για να μπορώ να γράφω
ελληνικά όλα πάνε καλά. Όμως μετά στην επόμενη επανεκκίνηση δεν
Με το καλό το Fosscomm 2010!
SI NO PUEDE VER ESTA PÁGINAHAGA CLIC AQUÍ
http://www.inmeza.com/promo/a1/a1.htm
LimparPortugal: Vamos limpar a floresta portuguesa num só dia - 20-03-2010
Um evento interessante para quem puder colaborar.
Cumprimentos a todos!
Sérgio Godinho
Clique no link abaixo para entrar:
http://limparportugal.ning.com/?xgi=4JvN5mCB6sMJy3xg_source=msg_invite_net
Hi,
Has anyone used ldconfig -l to manually link individual libraries? I
tried a command like ldconfig -l /opt/glib/lib/libglib-2.0.so, but it
did not work.
Thank you.
Kind Regards,
Jupiter
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe.
On 2010-01-16, Daniel Dalton d.dal...@iinet.net.au wrote:
On Sat, Jan 16, 2010 at 12:48:49AM +, Liam O'Toole wrote:
I've just installed lxde and like the concept of it. I must set an
environment variable so I can run orca under the desktop. What file
should I place an export command in
On Friday 15 January 2010 23:04:14 Rodolfo Medina wrote:
Does anybody know if Debian works fine on the netbook Acer Aspire ONE 531H
10? And if its 6 cells battery, that sould last at least 5 hours, does not
last less under Debian?
Lisi lisi.re...@gmail.com writes:
I have Lenny installed on
Hi,
On Sun, Jan 17, 2010 at 01:45, Rob Owens row...@ptd.net wrote:
I need help diagnosing a problem. I have a Lenny system that sometimes
reboots when I insert a USB key. It happens with multiple USB keys, but
I can't figure out the pattern as to when it reboots and when it
doesn't.
I had
I am trying to follow this example:
http://wiki.edseek.com/howto:exim4_courier
and I get down to the part where you test saslauthd:
Let's test our new server configuration again with swaks, actually performing
authentication by specifying a valid username and password before closing the
On 01/17/2010 09:58 AM, Paul Cartwright wrote:
I am trying to follow this example:
http://wiki.edseek.com/howto:exim4_courier
and I get down to the part where you test saslauthd:
Let's test our new server configuration again with swaks, actually performing
authentication by specifying a valid
On Sun January 17 2010, Eduardo M KALINOWSKI wrote:
the earlier test for TLS worked:
$ swaks -a -tls -q HELO -s localhost -au jasonb -ap ''
what am I missing?
I uncommented the lines in /etc/exim4/exim4.conf.template
What does /var/log/exim4/mainlog say when you try to
On Sun January 17 2010, Eduardo M KALINOWSKI wrote:
what am I missing?
I uncommented the lines in /etc/exim4/exim4.conf.template
What does /var/log/exim4/mainlog say when you try to authenticate?
I also don't seem to have an /etc/saslauthd.conf file..
I found mux here:
2010/1/17 Martin McCormick mar...@dc.cis.okstate.edu:
The laptop in question has a built-in dialup modem which
doesn't even show up as a serial port in Linux. In the P.C.'s
setup screen, it doesn't show up there so I can't remove or move
it out of the way, but a PCMCIA card installed
Hello,
i'm trying to use simple-cdd the first time. So far it's working, but i
don't know how to include the custom files
In the wiki is written:
To copy an arbitrary file into the /simple-cdd directory on the CD,
add the following to your .conf file:
On Sun January 17 2010, Paul Cartwright wrote:
What does /var/log/exim4/mainlog say when you try to authenticate?
when I do a ps saslauthd I see this:
ps -ef|grep sasl
root 8458 1 0 08:12 ? 00:00:00 /usr/sbin/saslauthd -a
pam -c -m /var/spool/postfix/var/run/saslauthd -r -n 5
On Sun, 17 Jan 2010 08:44:30 -0500, Paul Cartwright wrote:
where is the config file that tells it where saslauthd is?
/etc/default/sasluthd OPTIONS value?
Greetings,
--
Camaleón
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Hi All,
I am looking for a CAD tool to draw among other things contours. I have tried
to use the spline feature of QCAD. The issue is that I don't seem to find any
way of joining two splines together or extending an open spline.
I have also looked at PythonCAD but it does not seem to have any
Date: Mon, 18 Jan 2010 00:20:34 +0900
From: os...@debian.org
To: ogyach...@hotmail.com
CC: debian-user@lists.debian.org
Subject: Re: Any Linux CAD tools?
On Sun, Jan 17, 2010 at 04:47:53PM +0200, Ogya Chief wrote:
I am looking for a CAD tool...
What other options are available on
On Sun, Jan 17, 2010 at 04:47:53PM +0200, Ogya Chief wrote:
I am looking for a CAD tool...
What other options are available on the Linux platform?
http://www.debian.org/doc/manuals/debian-reference/ch11.en.html#_graphic_data_tools
--
To UNSUBSCRIBE, email to
On Sun, 17 Jan 2010 16:47:53 +0200, Ogya Chief wrote:
I am looking for a CAD tool to draw among other things contours. I have
tried to use the spline feature of QCAD. The issue is that I don't seem
to find any way of joining two splines together or extending an open
spline.
I have also
Hi All,
I am looking for a CAD tool to draw among other things contours. I
have tried to use the spline feature of QCAD. The issue is that I
don't seem to find any way of joining two splines together or
extending an open spline.
I have also looked at PythonCAD but it does not seem to
hello,
i have installed graphviz via aptitude on my debian 5.0 and it appears to be in:
$ whereis graphviz
graphviz: /usr/lib/graphviz /usr/share/graphviz
/usr/share/man/man7/graphviz.7.gz
but where is the executable ?
thank you in advance
--
roberto
--
To UNSUBSCRIBE, email to
On Sun, 17 Jan 2010 20:38:19 +0100, roberto wrote:
hello,
i have installed graphviz via aptitude on my debian 5.0 and it appears
to be in: $ whereis graphviz
graphviz: /usr/lib/graphviz /usr/share/graphviz
/usr/share/man/man7/graphviz.7.gz
but where is the executable ?
It seems the
On Sun, 17 Jan 2010 20:38:19 +0100
roberto robert...@gmail.com wrote:
Hello roberto,
but where is the executable ?
There isn't one, but many;
/usr/bin/tred
/usr/bin/gxl2dot
/usr/bin/dot
/usr/bin/gc
/usr/bin/lneato
/usr/bin/dotty
/usr/bin/prune
/usr/bin/lefty
/usr/bin/bcomps
/usr/bin/gvpr
On Sun, 2010-01-17 at 20:38 +0100, roberto wrote:
hello,
i have installed graphviz via aptitude on my debian 5.0 and it appears to be
in:
$ whereis graphviz
graphviz: /usr/lib/graphviz /usr/share/graphviz
/usr/share/man/man7/graphviz.7.gz
but where is the executable ?
Typing 'man
Sometimes the multiple sound devices in a system are
recognized by alsa. alsamixergui.man notes
OPTIONS ... -c card number or identification.
If I right-click on LXDEmenu:Sound Video:Alsamixergui
and left-click on Properties, an Application Shortcut
dialogue opens. There -c 1 can be added
Marco Vaschetto put forth on 1/16/2010 6:38 PM:
Jan 14 14:10:28 ssdsmb1tls kernel: lpfc :03:01.0: 0:0442 Adapter
failed to init, mbxCmd x88 CONFIG_PORT, mbxStatus x12 Data: x0
Jan 14 14:10:28 ssdsmb1tls kernel: lpfc :03:01.0: 0:0442 Adapter
failed to init, mbxCmd x88 CONFIG_PORT,
In Lenny, Coriander was able to use the
Unibrain Fire-i camera. Now in Squeeze
Coriander complains, Warning: could not
find a Digital Camera on the bus. ...
I'll guess that this involves the evolution
of udev and will be sorted out eventually.
Does any have a simple solution for the
On Sunday 17 January 2010 12:00:13 Rodolfo Medina wrote:
On Friday 15 January 2010 23:04:14 Rodolfo Medina wrote:
Does anybody know if Debian works fine on the netbook Acer Aspire ONE
531H 10? And if its 6 cells battery, that sould last at least 5 hours,
does not last less under Debian?
Greetings,
My latest apt-get update; apt-get dist-upgrade wants to install too
much cruft for me, namely apache2-mpm-prefork and *all* the
xserver-xorg-video-* packages, along with some others. Usually it just
wants to install one or two, keep a few and upgrade a bunch.
I don't know why would
On Sun, Jan 17, 2010 at 4:22 PM, Daniel Dalton d.dal...@iinet.net.auwrote:
[snip]
So basically it must have:
- Good debian support including wiffi
- core 2 duro 1.6 ghz or more
- Good battery life 5 hours or more.
I've been looking mainly at lenovo, hp, del, acer and maybe tosheba.
Any
The executables are dot, dotty, neato, etc. See 'man graphviz' also the docs at
the graphviz web site.
Mark
--Original Message--
From: roberto
To: Debian Users
Subject: graphviz hidden
Sent: Jan 17, 2010 12:38 PM
hello,
i have installed graphviz via aptitude on my debian 5.0 and it
On 2010-01-17 at 17:27:52 -0500, Nuno Magalhães wrote:
My latest apt-get update; apt-get dist-upgrade wants to install too
much cruft for me, namely apache2-mpm-prefork and *all* the
xserver-xorg-video-* packages, along with some others. Usually it just
wants to install one or two, keep a few
On Mon, Jan 18, 2010 at 01:34, Stephen Powell zlinux...@wowway.com wrote:
You haven't said whether you are running Lenny, Squeeze, or Sid,
Oh... Sid actually.
apt-get --no-install-recommends dist-upgrade
Nope, same result... thanks though.
--
() ascii-rubanda kampajno - kontraŭ html-a
On 2010-01-17 at 17:27:52 -0500, Nuno Magalhães wrote:
My latest apt-get update; apt-get dist-upgrade wants to install
[...] *all* the xserver-xorg-video-* packages,
you should probably be using aptitude, but regardless, you have
installed, at some point, xserver-xorg-video-all, which
I'm helping another family (not tech savvy) that is trying to use a
debian flavored OS and they have 2 computers...one is running XP and has
the wireless modem (a 2Wire) but the other computer is running linux and
we need a USB wireless adapter that works out of the box. They have
bought 3 so far
On Sun, Jan 17, 2010 at 6:27 PM, ZephyrQ zeph...@sbcglobal.net wrote:
[snip]
So, what USB wireless adapters will work out of the box, or is there a
website that will list them?
[snip]
This link was provided by Celejar from this list about 6 months ago when I
asked a similar question - just
ZephyrQ wrote:
So, what USB wireless adapters will work out of the box, or is there a
website that will list them?
Friend just purchased the Alfa AWUS036H the other day and I did see him
open the box. Worked find with the latest Kernel those guys are providing.
--
To UNSUBSCRIBE, email to
Dale writes:
You could have a look at doing it with udev
This does seem like what I need but I haven't gotten it
to make one bit of difference yet. With the PCMCIA card out, no
/dev/ttyS0 or /dev/ttyS1 devices are present. That modem which I
believe to be a Winmodem, is probably
Does anybody know what's causing this?
Is there anything I can do? It's been a couple of weeks like this.
I understand Normal Sid churn: Something like this happened on i386
a while ago and it took over a month to resolve there (I don't know
what happened, but one day it just went
On Monday 18 January 2010 07:11:36 Rick Thomas wrote:
Does anybody know what's causing this?
Is there anything I can do? It's been a couple of weeks like this.
I understand Normal Sid churn: Something like this happened on i386
a while ago and it took over a month to resolve there (I
73 matches
Mail list logo
