Changing the subject Line:
From:
Can the latest stable Debian be compelled to run in vesa mode, rather
than the motherboard graphics card, if the said card doesn't have
drivers available? How?
Last thread: https://lists.debian.org/debian-user/2021/04/msg00534.html
To the present one, to maintain
El 2021-04-18 a las 15:12 -0300, Marcelo Giordano escribió:
> > > > Ejecuta como súperusuario «fstab -l» y manda la salida a la lista.
>
> root@Marcelo:/home/marcelo# fstab -l
> bash: fstab: orden no encontrada
>
> Que raro esto, no anda nada.
No, es un error de transcripción mío :-)
La orden
Susmita/Rajib composed on 2021-04-19 10:30 (UTC+0530):
> Okay, in any case I am to reinstall fresh and latest stable Debian, as
> advised by Dr./Mr. Cater.
> So in nutshell, may please the steps be described? The idea involved?
Susmita/Rajib composed on 2021-04-19 8:35 (UTC+05300):
> On Sun, 18 Apr 2021 21:52:25 -0400, Felix Miata wrote:
> [...]
> As above indicated, it works with Debian 10, using the FOSS default X driver
> (Modesetting DIX), along with the Nouveau kernel driver it depends on. No
> proprietary NVidia
On Mon, 19 Apr 2021 00:12:29 -0400, Felix Miata wrote:
Ref: https://lists.debian.org/debian-user/2021/04/msg00530.html
"...
Unless and until all traces of NVidia's driver installation and associated
configuration changes have been purged from your machine, I can be no
help except
WRT eradicating
I have a Hewlett Packard zBook G5, with a generally successful Debian
with Gnome install, initially 10.x (as current in January 2020) and
recently upgraded to bullseye.
The installation is vanilla except that:
a. It is installed on ZFS (including /)
b. It has the nVidia proprietary driver and
Would the setps as described in the following link be necessary?
http://www.linuxfromscratch.org/blfs/view/svn/x/xorg-server.html
---
Installation of Xorg Server
Install the server by running the following commands:
./configure
Susmita/Rajib composed on 2021-04-19 08:34 (UTC+0530):
> On Sun, 18 Apr 2021 21:52:25 -0400, Felix Miata wrote:
> Can I make a request please? Could I send you a reply from the other thread
> at:
> https://lists.debian.org/debian-user/2021/04/msg00512.html
On Sun, 18 Apr 2021 21:52:25 -0400, Felix Miata wrote:
[...]
As above indicated, it works with Debian 10, using the FOSS default X driver
(Modesetting DIX), along with the Nouveau kernel driver it depends on. No
proprietary NVidia or other non-Debian software is required for competent Xorg
On Sun, 18 Apr 2021 21:52:25 -0400, Felix Miata wrote:
[...]
As above indicated, it works with Debian 10, using the FOSS default X driver
(Modesetting DIX), along with the Nouveau kernel driver it depends on. No
proprietary NVidia or other non-Debian software is required for competent Xorg
On Sun, 18 Apr 2021 17:56:46 +, "Andrew M.A. Cater"
wrote:
[QUOTE]
[...]
I followed through the screenshots you provided.
[...]
You can't ignore the source - you may have to apply it to a kernel.
[/QUOTE]
Okay, learnt. Thank you.
[QUOTE]
[...]
You have dependency errors. That's a bad
On Sun, 18 Apr 2021 17:56:46 +, "Andrew M.A. Cater"
wrote:
[QUOTE]
[...]
I followed through the screenshots you provided.
[...]
You can't ignore the source - you may have to apply it to a kernel.
[/QUOTE]
Okay, learnt. Thank you.
[QUOTE]
[...]
You have dependency errors. That's a bad
https://www.usa.canon.com/internet/portal/us/home/products/details/scanners/photo-scanner/canoscan-lide-110
It's a cheap workhorse. I haven't tried it with Linux but it doesn't
require any special software or drivers on macOS, which makes me think it
is entirely open standard.
--Gregory
On Sun,
Long Wind wrote:
> it changes as sound volume change
> i use alsa, not pulseaudioThanks!
alsamixer
-dsr-
Perhaps these lines in the post:
http://forums.debian.net/viewtopic.php?f=10=149280 were missed.
[quote="bkpsusmitaa"]Have been referring to the page:
https://wiki.debian.org/InstallingDebianOn#OfficialDocumentation
[...]
Indian vendors have been contacted by email/SMS or called over phone.
Susmita/Rajib composed on 2021-04-18 20:01 (UTC+0530):
> Vesa doesn't work in Debian Buster 10.8, by my blocking Nouveau
> through grub.cfg that halts the nvidia graphics chip. The string
> 'xmodule=vesa' doesn't work either.
> Debian nvidia drivers, as ever, fails to install.
> The nvidia
Greetings all;
I am trying to install a BLTouch kit in an Ender-3 3d printer.
The BLTouch is a gismo that touches the printers bed and records for
later correction, any errors in the bed leveling, a very important
item in a 3d printer.
This kit has a very sparsely described installation
Para registro, também tentei instalar um driver alternativo que encontrei
no github: https://github.com/FreedomBen/rtl8188ce-linux-driver
Nenhuma diferença aparente.
On Sun, 18 Apr 2021 at 17:52, Leonardo de Araújo Augusto <
leonardodearaujoaugu...@gmail.com> wrote:
> Gente, no link do
Gente, no link do hw-probe do email original (e no resultado do inxi) é
possível notar que o driver relevante está instalado e carregado.
cynthia@cy:~$ inxi -n
>
> Network:
>
> Device-1: Realtek RTL8188CE 802.11b/g/n WiFi *Adapter driver: rtl8192ce
> *
>
> IF: wlp1s0 state: down mac:
Hi!
It may be time for a new scanner.
For years I have used a Visioneer OneTouch 7100 usb flatbed scanner on
various x86 computers running various versions of Debian and
simple-scan.
Currently:
Debian Unstable (updated, of course)
Linux 5.10.0-6-amd64 #1 SMP Debian 5.10.28-1 (2021-04-09) x86_64
On 4/18/21 1:25 AM, Thanos Katsiolis wrote:
Thank you for your responses, you have been very helpful.
YW. :-)
My intention was to have both OSs installed and choose which one to boot.
From your answers I understand that it may not be safe for both OSs, so the
best solution is to have a
> I'd recommend to find a vendor that is shipping hardware with a linux
> distribution pre-installed,
Seconded. Not only it minimizes the problems you'll have when
installing Debian on it but it additionally helps promote those vendors
who do provide GNU/Linux support: vote with your wallet.
Ejecuta como súperusuario «fstab -l» y manda la salida a la lista.
root@Marcelo:/home/marcelo# fstab -l
bash: fstab: orden no encontrada
Que raro esto, no anda nada.
Antes de intentar reinstalar el paquete, dinos qué te devuelve estas
órdenes (la primera como súperusuario):
apt-get -f
Susmita/Rajib wrote:
> But in the end. may the two laptops, HP and HCL, be please ignored.
It is not about the make, but about the model. In general I recommend
choosing the business line if possible (perhaps buy used one), but still
only experience with the hardware can be the right. For
On Sun, Apr 18, 2021 at 10:36:07PM +0530, Susmita/Rajib wrote:
> Namaste, my dear illustrious Team Leaders and Solution providers,
>
> The questions was asked by Dr. Cater here:
> https://lists.debian.org/debian-user/2021/04/msg00506.html
> in relation to my post here:
>
On Sun, 18 Apr 2021 15:19:36 +, "Andrew M.A. Cater"
wrote:
> To: debian-user@lists.debian.org
> Subject: Re: [?]List of Best Debian-approved laptops in India
> From: "Andrew M.A. Cater"
> Date: Sun, 18 Apr 2021 15:19:36 +
> Message-id: <[]
Namaste, my dear illustrious Team Leaders and Solution providers,
The questions was asked by Dr. Cater here:
https://lists.debian.org/debian-user/2021/04/msg00506.html
in relation to my post here:
https://lists.debian.org/debian-user/2021/04/msg00504.html
That post was on a different issue, of
Hi Gene,
On Sun, Apr 18, 2021 at 12:41:05PM -0400, Gene Heskett wrote:
> My best guess, and admittedly a WAG, certainly not a SWAG, is that ssh
> and its ilk have been around for yonks. It has not been updated to allow
> what the lastest rfc now does. Based on that, perhaps a low priority bug
On Sun, Apr 18, 2021 at 12:41:05PM -0400, Gene Heskett wrote:
> On Sunday 18 April 2021 10:05:36 Greg Wooledge wrote:
> > I'm not saying that *all* programs will handle this hostname
> > correctly, but bullseye's version of getent(1) does. Assuming of
> > course that you have corrected your
On Sun, 2021-04-18 at 12:41 -0400, Gene Heskett wrote:
> On Sunday 18 April 2021 10:05:36 Greg Wooledge wrote:
>
> > On Sat, Apr 17, 2021 at 11:31:20PM -0400, Gene Heskett wrote:
> > > On Saturday 17 April 2021 21:47:20 Greg Wooledge wrote:
> > > > getent hosts 3dprint
> > >
> > > nothing is
On Sunday 18 April 2021 10:05:36 Greg Wooledge wrote:
> On Sat, Apr 17, 2021 at 11:31:20PM -0400, Gene Heskett wrote:
> > On Saturday 17 April 2021 21:47:20 Greg Wooledge wrote:
> > > getent hosts 3dprint
> >
> > nothing is returned.
>
> For the record, I cannot reproduce this on bullseye.
>
>
Além do firmware da realtek veja se tem o firmware-linux-nonfreeE veja se não
tem outro módulo carregado que possa estar conflitando com este
realtek.--Ricardo Libanio On Dom, 18 abr 2021 07:28:33 -0300
leonardodearaujoaugu...@gmail.com wrote Já está instalado e na última
versão. O
On Sat 17 Apr 2021 at 21:28:34 (-0400), Gene Heskett wrote:
> On Saturday 17 April 2021 20:26:19 Greg Wooledge wrote:
> > On Sat, Apr 17, 2021 at 08:11:37PM -0400, Gene Heskett wrote:
> > > I just checked this machine and 4 others, all of whom are mounted to
> > > their own named directory as
Acho bem válido tentar a solução que o Ricardo apresentou.
#apt-cache search realtek
Verifica qual vai atender sua placa e instala, lembrando do non-free no
sources.
Em sáb., 17 de abr. de 2021 às 18:36, riesdra escreveu:
> Se tiver acesso a internet pelo cabo instale o pacote
Bonjour,
Voici quelques jours que je me bataille avec un soucis d'impression.
Ne trouvant pas la solution, je me résoud à demander votre aide.
Depuis des années, j'ai une imprimante HP PhotoSmart C4400 connecté
sur un petit B3 (armel). Mais suite à une montée de version en Buster
(10.9) voilà
On Sun, Apr 18, 2021 at 08:01:46PM +0530, Susmita/Rajib wrote:
> My illustrious List Leaders and solution providers,
>
> My references are here:
> http://forums.debian.net/viewtopic.php?f=10=149280
> {to avoid repetition)
Rajib,
Please do not do this. Please do not refer across to the forums as
On Sun, Apr 18 2021 at 08:01:46 PM, "Susmita/Rajib"
wrote:
> My illustrious List Leaders and solution providers,
>
> My references are here:
> http://forums.debian.net/viewtopic.php?f=10=149280
> {to avoid repetition)
>
> Need your advice and suggestion on the issue. The laptops that I have
>
My illustrious List Leaders and solution providers,
My references are here:
http://forums.debian.net/viewtopic.php?f=10=149280
{to avoid repetition)
Need your advice and suggestion on the issue. The laptops that I have
are problematic under Debian. Some modified Debian installation like
Knoppix
On Sat, Apr 17, 2021 at 11:31:20PM -0400, Gene Heskett wrote:
> On Saturday 17 April 2021 21:47:20 Greg Wooledge wrote:
>
> > getent hosts 3dprint
> nothing is returned.
For the record, I cannot reproduce this on bullseye.
unicorn:~$ grep hosts /etc/nsswitch.conf
hosts: files
Hi.
On Sun, Apr 18, 2021 at 03:49:12PM +0200, to...@tuxteam.de wrote:
> > Hence "3dprint" is a perfectly valid hostname, compliant with RFC1123.
> > As shown (to me) by a quick experiment, both dnsmasq and bind accept
> > "3dprint" for both A and record, and it resolves successfully.
On Sun, Apr 18, 2021 at 04:44:05PM +0300, Reco wrote:
> Hi.
>
> On Sun, Apr 18, 2021 at 03:36:45PM +0200, to...@tuxteam.de wrote:
> > On Sun, Apr 18, 2021 at 09:21:55AM -0400, Gene Heskett wrote:
> > > On Saturday 17 April 2021 23:31:20 Gene Heskett wrote:
> > >
> > > It boiled down to
On Sun, Apr 18, 2021 at 09:21:55AM -0400, Gene Heskett wrote:
> It boiled down to something, someplace, not liking a hostname starting
> with a number, I recalled I had to rename another machine a couple
> months ago because it didn't work either.
>
> But I changed its hostname to dddprint,
Hi.
On Sun, Apr 18, 2021 at 03:36:45PM +0200, to...@tuxteam.de wrote:
> On Sun, Apr 18, 2021 at 09:21:55AM -0400, Gene Heskett wrote:
> > On Saturday 17 April 2021 23:31:20 Gene Heskett wrote:
> >
> > It boiled down to something, someplace, not liking a hostname starting
> > with a
On Sun, Apr 18, 2021 at 09:21:55AM -0400, Gene Heskett wrote:
> On Saturday 17 April 2021 23:31:20 Gene Heskett wrote:
>
> It boiled down to something, someplace, not liking a hostname starting
> with a number, I recalled I had to rename another machine a couple
> months ago because it didn't
On Saturday 17 April 2021 23:31:20 Gene Heskett wrote:
It boiled down to something, someplace, not liking a hostname starting
with a number, I recalled I had to rename another machine a couple
months ago because it didn't work either.
But I changed its hostname to dddprint, based on the
Bonjour,
Depuis quelques mois, j'ai un des clients sauvegardé par backuppc
qui ne veut plus rien savoir...
Voici la fin du log
On 2021-04-18, Sven Joachim wrote:
>>
>> How I can turn it on during runtime? without need to patch manually
>> and built the package locally?
>
> I don't think you can, this is a build time feature IIUC. There is a
> bug report requesting it to be enabled: https://bugs.debian.org/886358.
Thank you for your responses, you have been very helpful.
My intention was to have both OSs installed and choose which one to boot.
>From your answers I understand that it may not be safe for both OSs, so the
best solution is to have a machine dedicated to Debian.
On Sun, Apr 18, 2021 at 8:28 AM
On 4/17/21 21:31, Gene Heskett wrote:
> On Saturday 17 April 2021 21:47:20 Greg Wooledge wrote:
>
>> getent hosts 3dprint
> nothing is returned.
>
> I think I might be on the trail though, I just recalled I had to rename
> another machine several months back, from 6040 to sixty40, someplace
On 4/17/21 21:31, Gene Heskett wrote:
> On Saturday 17 April 2021 21:47:20 Greg Wooledge wrote:
>
>> getent hosts 3dprint
> nothing is returned.
>
> I think I might be on the trail though, I just recalled I had to rename
> another machine several months back, from 6040 to sixty40, someplace
On 2021-04-18 07:56 +0800, Robbi Nespu wrote:
> Hello! I not able to use "screen share" on google meet using chromium
> browser.
>
> Each time I clicked on it, I get "your browser can't share your
> screen" and dev tool > console don't complaint anything about it.
>
> I did a google-fu and found
On 2021-04-18 12:31 +0800, Robbi Nespu wrote:
> A quick or temporary solution are to git clone
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
> and copy thus selection (warning line) of missing modules to
> /lib/firmware/amdgpu/
>
> (Don't try my solution if you are
52 matches
Mail list logo
