Hi.
On Tue, Oct 05, 2021 at 10:00:45PM +0200, Pierre Frenkiel wrote:
> hi,
> I have the following problem on my laptop.
> my /etc/network/interfaces file contains:
>auto enp0s1
>iface enp0s1 inet static
>address 192.168.1.10
>netmask 255.255.255.0
>gateway 192.168.1.1
Hi.
On Tue, Oct 05, 2021 at 04:40:41PM -0400, Greg Wooledge wrote:
> Is this happening to anyone else?
Not yet.
> Is there anything I can do to stop it, other than simply
> re-subscribing every time I post?
It says there plain and clear:
> > When in doubt, ... or send mail to
On Ma, 05 oct 21, 10:48:03, Kenneth Parker wrote:
> On Tue, Oct 5, 2021, 9:04 AM David Wright wrote:
>
> > Yes, apt-get was recommended for upgrading to stretch. Note however
> > that if you perform your next upgrades with apt, as recommended,
> > some of the command names (like dist-upgrade)
Bonjour,
Je ne suis pas aussi pointu que Joël.
Mais si je devais me pencher sur ce problème j'étudierais ce que d'autres ont
déjà fait.
https://www.semageek.com/une-distribution-linux-pour-hacker-les-cartes-rfid/
https://www.latelierdugeek.fr/2017/07/12/rfid-le-clone-parfait/
On Tuesday, October 5, 2021, 2:50:15 PM EDT, piorunz
wrote:
On 05/10/2021 04:10, L Dimov wrote:
>
> So as far as I can tell, I need i915/kbl_dmc_ver1_04.bin,
> ar3k/AthrBT_0x3101.dfu, rtl_nic/rtl8153a-3.fw, and
> rtl_nic/rtl8153a-3.fw. Is that true? And if yes, how do go about
Bonjour,
J'ai trouvé un lecteur compatible ISO14443 et ISO15693 compatible Linux :
HID OMNIKEY 5022
Le support
https://www.hidglobal.fr/drivers/14989
Pas bien cher sur Amazon je serais prêt à tester.
Votre avis ?
pierre estrem
Le 05/10/2021 à 16:59, BERTRAND Joël a écrit :
Pierre ESTREM a
On 10/5/21 4:25 PM, Gary L. Roach wrote:
Hi again,
I finally found a straight forward installation process for shared
folders. See:
*https://nts.strzibny.name/how-to-set-up-shared-folders-in-virt-manager/*
If you are using something like /home/gary/vmshare as a folder name
use that when
On 05/10/2021 18:21, Roy J. Tellason, Sr. wrote:
> So when I tell synaptic package manager to reload, to get current
> information, I see "failed" for two of the things that it's trying
> to download. Then I get a box with error messages in it as follows:
>
> "GPG error:
Hi Greg,
On Tue, Oct 05, 2021 at 04:40:41PM -0400, Greg Wooledge wrote:
> My best guess is that someone is spamming debian-user, the messages are
> being sent to everyone, my local MTA's spam filters are blocking them,
> and the mailing list is getting mad at me for blocking the spam that it's
>
J'essaierai, mais d'après mes recherches sur internet, tracker a bien un
problème d'extraction des tags des fichiers FLAC. Ce problème serait réglé par
tracker3 à partir de la version 3.38 de Gnome Music
(https://gitlab.gnome.org/GNOME/gnome-music/-/issues/388). Debian stable que
j'utilise
On 10/5/21, Greg Wooledge wrote:
> In the last 24 hours, I've been dropped from this list at least 3 times.
> I am able to re-subscribe, but it's a real pain in the ass.
>
> It seems to happen after I post a message to the list while subscribed.
> In each case, I receive a message like the one
Hi,
Greg Wooledge wrote:
> In the last 24 hours, I've been dropped from this list at least 3 times.
> [...]
> Is this happening to anyone else?
Not to me.
> > >Date: Tue, 5 Oct 2021 22:28:47 +0200
> > >Subject: **stop**
I am not aware to have seen this.
So the theory seems not plausible that
A bricked iPhone directs "connect to iTunes".
Attempting to run iTunesSetup.exe on wine yields the following.
Ideas?
Thx, ... P.
peter@joule:~$ wine iTunesSetup.exe
0104:fixme:file:NtLockFile I/O completion on lock not implemented yet
0104:fixme:ntdll:NtQuerySystemInformation
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
‐‐‐ Original Message ‐‐‐
On Tuesday, October 5, 2021 2:00 PM, Pierre Frenkiel
wrote:
> hi,
> I have the following problem on my laptop.
> my /etc/network/interfaces file contains:
> auto enp0s1
> iface enp0s1 inet static
> address
On 05/10/2021 21:40, Greg Wooledge wrote:
Your mail addressg...@wooledge.org has been removed
from thedebian-u...@lists.debian.org mailinglist.
It generated an excessive amount of bounced mails.
That's the explanation. My guess, based on this, is:
Your e-mail system bounces spam back,
In the last 24 hours, I've been dropped from this list at least 3 times.
I am able to re-subscribe, but it's a real pain in the ass.
It seems to happen after I post a message to the list while subscribed.
In each case, I receive a message like the one I've quoted below.
Is this happening to
On Tue, Oct 05, 2021 at 10:00:45PM +0200, Pierre Frenkiel wrote:
> hi,
> I have the following problem on my laptop.
> my /etc/network/interfaces file contains:
>auto enp0s1
>iface enp0s1 inet static
>address 192.168.1.10
>netmask 255.255.255.0
>gateway 192.168.1.1
>
>but
Pierre Frenkiel wrote:
> hi,
> I have the following problem on my laptop.
> my /etc/network/interfaces file contains:
>auto enp0s1
>iface enp0s1 inet static
>address 192.168.1.10
>netmask 255.255.255.0
>gateway 192.168.1.1
>
>but after boot, ifconfig gives
>
>
On Tue, 5 Oct 2021 20:01:16 +0100
Brian wrote:
> The emphasis is on mobile devices. I wonder why they are singled out?
> Interesting.
>
> I would set a Username and Password and see how you go on printing and
> scanning using CUPS and SANE and your iPhone.
Good idea. The app on the iPhone
Boa, Junior. Acredito que criar um .desktop seja a melhor opção.
Porém, eu salvaria o arquivo .desktop na pasta
*/home//.local/share/applications/* (~/.local/share/applications/).
Os ícones criados pelo sistema eu deixo na pasta */usr/share/applications/*
(pasta que você citou), mas os que eu
hi,
I have the following problem on my laptop.
my /etc/network/interfaces file contains:
auto enp0s1
iface enp0s1 inet static
address 192.168.1.10
netmask 255.255.255.0
gateway 192.168.1.1
but after boot, ifconfig gives
address 192.168.0.163
netmask 255.255.255.0
On Tue 05 Oct 2021 at 10:17:06 -0600, Charles Curley wrote:
> On Tue, 5 Oct 2021 14:16:10 +0100
> Brian wrote:
>
> > In which manual section, or on which page, is access control
> > described?
>
> I take it you mean for the printer, not CUPS. For the printer, it is on
> the embedded web
Pierre ESTREM a écrit :
> Bonsoir,
>
> Merci pour votre réponse, hélas qui me laisse mal : je n'ai pas les
> compétences d'un électronicien.
>
> Si vous y parvenez sachez que nos tags à lire sont de la norme "ISO-AFI".
> Alors prévenez-nous ! :)
Je peux vous envoyer un devis, si vous
On 05/10/2021 04:10, L Dimov wrote:
So as far as I can tell, I need i915/kbl_dmc_ver1_04.bin,
ar3k/AthrBT_0x3101.dfu, rtl_nic/rtl8153a-3.fw, and
rtl_nic/rtl8153a-3.fw. Is that true? And if yes, how do go about getting
them?
Just to tackle this, for you or other interested people:
Easiest
On 10/5/21 06:21, L Dimov wrote:
On Tuesday, October 5, 2021, 1:59:21 AM EDT, David Christensen
wrote:
If your laptop has hardware that requires proprietary firmware, I very
much doubt that the firmware in question will ever be open-sourced.
Without the proprietary firmware, the best
On 05/10/2021 18:21, Roy J. Tellason, Sr. wrote:
"GPG error: https://download.virtualbox.org/virtualbox/debian stretch
What system are you on?
--
With kindest regards, Piotr.
⢀⣴⠾⠻⢶⣦⠀
⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system
⢿⡄⠘⠷⠚⠋⠀ https://www.debian.org
⠈⠳⣄
On 10/5/2021 7:21 PM, Roy J. Tellason, Sr. wrote:
So when I tell synaptic package manager to reload, to get current information, I see
"failed" for two of the things that it's trying to download. Then I get a box
with error messages in it as follows:
"GPG error:
Bonsoir,
Merci pour votre réponse, hélas qui me laisse mal : je n'ai pas les
compétences d'un électronicien.
Si vous y parvenez sachez que nos tags à lire sont de la norme "ISO-AFI".
Alors prévenez-nous ! :)
pierre estrem
Le 05/10/2021 à 16:59, BERTRAND Joël a écrit :
Pierre ESTREM a
So when I tell synaptic package manager to reload, to get current information,
I see "failed" for two of the things that it's trying to download. Then I get
a box with error messages in it as follows:
"GPG error: https://download.virtualbox.org/virtualbox/debian stretch
InRelease: The
On Tue, 5 Oct 2021 13:58:35 + (UTC)
L Dimov wrote:
> My mic used to work fine under Debian 9 and 10, but after upgrading to 11,
> people tell me that the audio coming out of my mic is really scratchy and bad
> to the point where if I do a video call, I'd have to use the phone for the
>
So I'm currently looking at an annoying blue dot up there in my taskbar,
adjacent to the speaker and network icons over there on the right hand side.
When I click on it I get a small popup window saying "KDE Accessible", and
when I right-click on it I get a smallish menu, one option of
> Sometimes an older kernel does better than a newer kernel, in the absence
> of proper firmware. Sometimes it doesn't.
Sometimes a blob is moved from `main` to `contrib` or `non-free` because
it was in `main` by mistake (tho I can't remember that happening
between Debian 10 and Debian 11).
On Tue, 5 Oct 2021 14:16:10 +0100
Brian wrote:
> In which manual section, or on which page, is access control
> described?
I take it you mean for the printer, not CUPS. For the printer, it is on
the embedded web server.
https://hpm234ethernet -> Networking -> Advanced.
It isn't described,
Le 05/10/2021 à 12:54, Jean Bernon a écrit :
Merci à ceux qui ont répondu à la question.
Après avoir examiné les différentes suggestions, finalement le problème vient
de ce que tracker n'indexe pas les fichiers flac. Or la majorité de ma musique
est au format flac. J'ai essayé de
On Tue, Oct 05, 2021 at 03:24:41PM +, L Dimov wrote:
> My fans were going crazy after restart, as usual, so I finally looked at the
> System Monitor to find that with no programs started by me,
> gnome-contacts-search-provider was using the most, reaching up to 1.8 GB. All
> 8 CPUs were
On Sat 02 Oct 2021 at 08:15:59 (+0200), to...@tuxteam.de wrote:
> On Fri, Oct 01, 2021 at 03:18:22PM -0500, David Wright wrote:
>
> [...]
>
> > I have a buster system that was up-to-date from the last point-release
> > and kernel (2021-09-10 18:22:47).
> >
> > The only certificate expiration
On Tue 05 Oct 2021 at 10:48:03 (-0400), Kenneth Parker wrote:
> On Tue, Oct 5, 2021, 9:04 AM David Wright wrote:
> > Yes, apt-get was recommended for upgrading to stretch. Note however
> > that if you perform your next upgrades with apt, as recommended,
> > some of the command names (like
On Tue 05 Oct 2021 at 10:55:36 (-0400), Roy J. Tellason, Sr. wrote:
> On Tuesday 05 October 2021 09:04:03 am David Wright wrote:
> > > > So the main things to confirm as working are the specific points
> > > > mentioned in the respective Release Notes. In stretch that would
> > > > be, for
Hi,
i wrote:
> > The proposal of mett finally got wget to download lists.debian.org with
> > certificate check enabled.
> > [...]
> > Now i am puzzled why this operation is not necessary on Debian 10 from
> > where the file /etc/ca-certificates.conf was copied.
> > The entry is in
On 05/10/2021 16:24, L Dimov wrote:
My fans were going crazy after restart, as usual, so I finally looked at
the System Monitor to find that with no programs started by me,
gnome-contacts-search-provider was using the most, reaching up to 1.8
GB. All 8 CPUs were running on 99 to 100%. After
On Tue, 5 Oct 2021 09:52:12 +0300
Andrei POPESCU wrote:
> > Yeah, that was it. I hadn't installed ALSA at all. I wasn't aware
> > that pulseaudio sits on top of ALSA.
>
> Because PulseAudio "sits on top of" ALSA it also depends on it. Some
> command-line tools for ALSA are not installed by
Bonjour,
Depuis le passage d'Evolution de la version 3.38 à la 3.42 celui-ci n'arrive
plus à accéder aux bal locales dans /var/mail/
Il se plaint de ne pouvoir verrouiller /var/mail/
Auriez-vous une idée de la cause ?
Merci,
Gaëtan
signature.asc
Description: This is a digitally signed
Pierre ESTREM a écrit :
> Bonjour,
>
> J'ai pour projet de réaliser une solution portable pour lire
> (éventuellement aussi écrire) des étiquettes RFID de norme ISO15693.
>
> Dans un premier temps depuis Debian puis Raspberry (Raspbian).
>
> J'ai bien un bon tutoriel pour la norme ISO14443 et
On Tuesday 05 October 2021 09:04:03 am David Wright wrote:
> > > So the main things to confirm as working are the specific points
> > > mentioned in the respective Release Notes. In stretch that would
> > > be, for example, the 4.9 kernel is finding everything,
> >
> > About the only issue that
On Tue, Oct 5, 2021, 9:04 AM David Wright wrote:
> On Mon 04 Oct 2021 at 21:16:06 (-0400), Roy J. Tellason, Sr. wrote:
> > On Monday 04 October 2021 07:55:25 pm David Wright wrote:
>
> > > It would help people trying to follow what you are doing just to
> confirm at each stage which version
- Mail original -
> De: "Bernard Schoenacker"
> À: "Debian User French"
> Envoyé: Mardi 5 Octobre 2021 13:41:14
> Objet: à propos de Liferea
>
> Bonjour,
>
> Je recherche à obtenir le fichier opml de liferea dans
> d'autres langues :
>
> Allemand
> Anglais
>
> Merci pour votre
Agradeço ao Luiz Gil e Daniel Venturini pelo retorno...
mas respondendo ao Daniel Venturini qual a interface gráfica é a GNOME que
utilizo.
Grato
Hi.
On Tue, Oct 05, 2021 at 02:13:10PM +, L Dimov wrote:
> LibreOffice Writer and Impress became unbearably slow when cropping or moving
> images around on the page. Also Impress was super slow o page through when
> the presentation contained a background image on all slides (but
On 10/04/21 at 11:54, Thomas Schmitt wrote:
> Hi,
>
> mett wrote:
> > the final solution is:
> > -disable the certs with an ! before the cert name
> > (vi /etc/ca-certificates.conf: !DST_Root_CA_X3.crt)
> > -then, rebuild the cert directory (update-ca-certificates --fresh)
>
> Indeed this
Hola, Julio
> em recomaneu per a ordinadors d'alumnes de cicles no posar swap?
Si tens molta RAM segurament no us calgui. En alguns casos la
swap fa de coixí i permet que el sistema o els processos que
consumeixen els recursos no morin inútilment després d'hores,
dies o setmanes de feina. Si no
My mic used to work fine under Debian 9 and 10, but after upgrading to 11,
people tell me that the audio coming out of my mic is really scratchy and bad
to the point where if I do a video call, I'd have to use the phone for the
audio part. Not sure where to even start with this... Is there an
On Tuesday, October 5, 2021, 6:43:28 AM EDT, Andrew M.A. Cater
wrote:
Hi Luben,
You hae no wifi firmware / video firmware / Ethernet firmware installed.
You've said in other messages in the thread that you don't want to use
contrib or non-free firmware but I do not think you will
On 05/10/2021 06:10, L Dimov wrote:
I am having slower performance on Debian 11 with software only from
the "main" repositories after upgrade from 10.
It is on a decently powerful Dell laptop with 16 GB memory, 1 TB SSD,
7 processors Intel Core i5-8350U CPU @ 1.70GHz
How much is slowdown? If
On Mon 04 Oct 2021 at 15:48:14 -0600, Charles Curley wrote:
> I have just bought an HP LaserJet MFP M232-M237 - IPP Everywhere. It
> will let me require authentication for IPP clients. This would be a
> nice thing to have in a SOHO environment, and a requirement in any
> large institution.
>
> I
On Tue 05 Oct 2021 at 12:55:49 (+0200), Hans wrote:
>
> somehow I missed something and was surprised today.
>
> Does anyone know, when plasma (kde) did change the position of its
> configuration files from ~/.kde to ~/.config? And according to this, is
> ~/.kde
> still needed or can it be
On Mon 04 Oct 2021 at 21:16:06 (-0400), Roy J. Tellason, Sr. wrote:
> On Monday 04 October 2021 07:55:25 pm David Wright wrote:
> > It would help people trying to follow what you are doing just to confirm at
> > each stage which version you're now running.
> > I /think/ you've got as far as
On Tue 05 Oct 2021 at 08:43:22 (+0200), Jan-Erik Schröder wrote:
>
> yesterday we installed Debian 11 on our raspberry pi3's as part of our
> Youth Programming Course and cannot login. Thank you in advance
username: user
password: live
Cheers,
David.
Hoi,
Een korte vraag. Ik ben bezig met spf, dkim, dmarc, dat soort dingen.
Nu wordt in de meeste howto's over DKIM / postfix die ik via google vind
de variant openDKIM gebruikt.
(https://www.sidn.nl/en/news-and-blogs/hands-on-implementing-spf-dkim-and-dmarc-in-postfix)
On Tue, Oct 05, 2021 at 03:18:55PM +0300, Anssi Saari wrote:
> "Andrew M.A. Cater" writes:
>
> > In your case: I would add the contrib and non-free parts to the
> > /etc/apt/sources.list as suggested.
>
> But these firmware packages were in non-free also in Debian 10 so just
> upgrading to
"Andrew M.A. Cater" writes:
> In your case: I would add the contrib and non-free parts to the
> /etc/apt/sources.list as suggested.
But these firmware packages were in non-free also in Debian 10 so just
upgrading to Debian 11 shouldn't have changed anything. Unless Luben
changed his stance on
Olá!
Falando do Gnome, o ideal seria criar um
"«programa_do_século».desktop", então jogar esse arquivo dentro de
"/usr/share/applications/". A dica seria copiar um que já tem lá, por
exemplo "/usr/share/applications/org.gnome.Terminal.desktop", e ir
alterando para seu programa, que
Bonjour,
Je recherche à obtenir le fichier opml de liferea dans
d'autres langues :
Allemand
Anglais
Merci pour votre aimable attention
Bien à vous
Bernard
Hi folks,
somehow I missed something and was surprised today.
Does anyone know, when plasma (kde) did change the position of its
configuration files from ~/.kde to ~/.config? And according to this, is ~/.kde
still needed or can it be safely fully deleted?
Thanks for reading and any answers.
Merci à ceux qui ont répondu à la question.
Après avoir examiné les différentes suggestions, finalement le problème vient
de ce que tracker n'indexe pas les fichiers flac. Or la majorité de ma musique
est au format flac. J'ai essayé de réindexer ce type de fichier avec la commande
tracker
On Tue, Oct 05, 2021 at 03:10:50AM +, L Dimov wrote:
> I am having slower performance on Debian 11 with software only from the
> "main" repositories after upgrade from 10.It is on a decently powerful Dell
> laptop with 16 GB memory, 1 TB SSD, 7 processors Intel Core i5-8350U CPU @
> 1.70GHz
On Tue, Oct 05, 2021 at 08:43:22AM +0200, Jan-Erik Schröder wrote:
> Good Morning,
>
> yesterday we installed Debian 11 on our raspberry pi3's as part of our
> Youth Programming Course and cannot login. Thank you in advance
Could you be a bit more specific on how you did that installation?
By
On Lu, 04 oct 21, 16:36:49, D. R. Evans wrote:
> D. R. Evans wrote on 10/4/21 4:12 PM:
> > I just tried to upgrade my main desktop machine (this machine) from buster
> > to
> > bullseye.
> >
>
> I am suspicious that the problem is related to having root on ZFS on this
> machine. So I have
Good Morning,
yesterday we installed Debian 11 on our raspberry pi3's as part of our
Youth Programming Course and cannot login. Thank you in advance
Greetings,
Schröder
On Lu, 04 oct 21, 17:10:39, Bob Latest wrote:
> On Mon, 04 Oct 2021 07:35:28 +0200
> deloptes wrote:
>
> > you have
> >
> > hardware -> kernel driver -> alsa -> pulseaudio -> application
> >
> > - kernel driver utilizes the hardware
> > - alsa utilizes the kernel driver
> > - PA utilizes ALSA
On 10/4/21 22:58, David Christensen wrote:
The Intel Core i5-8550U
correction: i5-8350u
David
70 matches
Mail list logo
