Pankaj Jangid writes:
> Dan Ritter writes:
>
>> Pankaj Jangid wrote:
>>> Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
>>> facing a very strange problem. The monitor goes blank for a brief time,
>>> like 1-2s and then comes back. It is connected with the GPU using HDMI
>>>
On Wed, Jan 26, 2022 at 09:07:31PM -0600, Martin McCormick wrote:
> Command (m for help): p
> Disk /dev/sdh: 28.8 GiB, 30908350464 bytes, 60367872 sectors
> Disk model: USB HS-SD Card
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minim
On Wed, Jan 26, 2022, 12:39 PM Andrei POPESCU
wrote:
> On Ma, 25 ian 22, 16:13:23, Nate Bargmann wrote:
> > I am subscribed to that list and get them too.
> >
> > I just see that three more messages popped in since this morning from
> > the security list.
> >
> > The complaints seem to be only ab
On 1/27/22, Charles Curley wrote:
> On Thu, 27 Jan 2022 21:30:25 +
> Aaron Gray wrote:
>
>> Is it possible to get the Haskell-Platform updated to a more recent
>> version ?
>>
>> Debian has got the 2014 version on all releases.
>>
>> Can someone point me in the right direction as to how to do
On 2022-01-27 8:54 p.m., Martin McCormick wrote:
Great suggestions but I can't. Part of the typescript output I
included was me doing just that and I was root when I did it but
the squawk is that I don't have permission as if I wasn't root.
Oops! Sorry I missed the operation not permitted mess
On 28/1/22 9:54 am, Martin McCormick wrote:
Great suggestions but I can't. Part of the typescript output I
included was me doing just that and I was root when I did it but
the squawk is that I don't have permission as if I wasn't root.
If writing to the SSD card was possible, I could
Bijan Soleymani writes:
> Can you delete both partitions, create a new single linux partition,
> reboot
> then run mkfs.ext4 to create a single new partition and then just install
> linux onto it or try dd again?
Great suggestions but I can't. Part of the typescript output I
included was me doi
On Thu 27 Jan 2022 at 16:58:01 (-0600), Martin McCormick wrote:
> Charles Curley writes:
> > I'm no expert on RPis, but that sounds to me like the SD card is
> > protected against writes. Check for any physical write protection
> > switches on the card itself and the holder.
>
> Thanks for the su
On 2022-01-26 10:07 p.m., Martin McCormick wrote:
The SSD passed a fsck test earlier in the day before I
blew it up so the chip should be salvageable. I don't care for
recovering either of the two partitions which will be overwritten
anyway if the SSD can be made writable again.
Can yo
Charles Curley writes:
> I'm no expert on RPis, but that sounds to me like the SD card is
> protected against writes. Check for any physical write protection
> switches on the card itself and the holder.
Thanks for the suggestion, but this is one of those SSD cards
that often is found in a camera
Hello,
On Wed, Jan 26, 2022 at 08:38:41PM +, piorunz wrote:
> My current fstab mounting:
>
> noatime,space_cache=v2,compress-force=zstd:3 0 2
>
> Will autodefrag break COW files? Like I copy paste a file and I save
> space, but defrag with destroy this space saving?
Yes, I believe so. That
Aaron Gray wrote:
> Is it possible to get the Haskell-Platform updated to a more recent version ?
>
> Debian has got the 2014 version on all releases.
>
> Can someone point me in the right direction as to how to do something
> about this please ?
So you go and look at
https://packages.debian.
On Wed, 26 Jan 2022 21:07:31 -0600
"Martin McCormick" wrote:
> 1wb5agz martin tmp $ sudo dd if=~/rpi/rpi2_good.img of=/dev/sdh
> [sudo] password for martin:
> dd: writing to '/dev/sdh': Operation not permitted
> 1+0 records in
> 0+0 records out
> 0 bytes copied, 0.021666 s, 0.0 kB/s
> 2wb5agz ma
On Thu, 27 Jan 2022 21:30:25 +
Aaron Gray wrote:
> Is it possible to get the Haskell-Platform updated to a more recent
> version ?
>
> Debian has got the 2014 version on all releases.
>
> Can someone point me in the right direction as to how to do something
> about this please ?
Knowing no
Is it possible to get the Haskell-Platform updated to a more recent version ?
Debian has got the 2014 version on all releases.
Can someone point me in the right direction as to how to do something
about this please ?
Regards,
Aaron
--
Aaron Gray
Independent Open Source Software Engineer, Comp
I thanked the person who responded to my post and reported that
there were no unusual log entries in syslog on the failing system
so not much to go on. I decided to upgrade the Raspberry Pi
which was suddenly having this mysterious problem as I have
backups of the failing system so I figured I'd j
Hi,
I use Sid but this problem came back to me a while ago now.
Searching the internet for a solution, I dug around and ended up in the
following:
https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/640705
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=107881
https://bugs.d
On Thu, Jan 27, 2022, at 08:24, Bob Crochelt wrote:
>
>
> On Wed, Jan 26, 2022, at 18:14, Felix Miata wrote:
>> Bob Crochelt composed on 2022-01-26 17:25 (UTC-0800):
>>
>> > inxi output attached.
>>
>> Your iMac's BIOS date is about a month earlier than mine. Likely the only
>> difference b
Bob Crochelt composed on 2022-01-27 08:24 (UTC-0800):
> Felix Miata wrote:
>> overheating. Have you tried running memtest86?
> Tried to run memtest86 from the grub menu but it just seemed to
> sit there, will try that again today.
Your Grub menu has memtest86+. That's quite different than memt
On Wed, Jan 26, 2022, at 21:34, Charles Curley wrote:
> On Wed, 26 Jan 2022 16:52:55 -0800
> "Robert F. Crochelt" wrote:
>
> > Can't even
> > shift to a different console with ctrl-F_.
>
> Try ctl-alt-F_.
>
> --
> Does anybody read signatures any more?
>
> https://charlescurley.com
> https:
On Wed, Jan 26, 2022, at 18:14, Felix Miata wrote:
> Bob Crochelt composed on 2022-01-26 17:25 (UTC-0800):
>
> > inxi output attached.
>
> Your iMac's BIOS date is about a month earlier than mine. Likely the only
> difference between ours is you have G92M [GeForce 8800M GTS] while I have
> RV
On 2022-01-27 5:30 a.m., hdv@gmail wrote:
Sadly I do not have access to this machine remotely. I do have my own
VPN server, but that does not help when the machine in question is
turned off. ;-)
I'll check the temperature when I am back, and when it happens again.
I played around a tiny bi
Tim Woodall writes:
> For a while I was using a mac (running macOS) plugged into a dock with
> two HDMI screens connected and I was having this problem occasionally.
> The mac was clearly thinking the screens had "gone away" because it
> would move windows around. I've now switched to a windows l
Vincent Lefevre writes:
> So it could be a hardware problem, with this monitor or something
> else, possibly specific to HDMI.
>
> I suggest that you try with another machine, another cable, etc. if
> possible. Or the same machine with another monitor.
I have multiple cables and an extra laptop.
"hdv@gmail" writes:
> You are not the only one. I see the exact same here. The system this
> happens on has an RX560 graphics card. I have been seeing these
> blackouts from the start on this configuration (more than 2 years
> now).
>
> I can confirm it is not a mechanical issue (not of cable's
>
Dan Ritter writes:
> Pankaj Jangid wrote:
>> Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
>> facing a very strange problem. The monitor goes blank for a brief time,
>> like 1-2s and then comes back. It is connected with the GPU using HDMI
>> cable.
>>
>> During that 1-2s,
Bijan Soleymani writes:
> On 2022-01-26 11:35 p.m., Pankaj Jangid wrote> I don’t want to file
> any bug report till I have some concrete data. So
>> my question is - how do I diagnose such an issue and produce some data
>> for debugging. So that I can hand it over to maintainers.
>
> This one lin
David Wright writes:
> On Thu 27 Jan 2022 at 10:05:16 (+0530), Pankaj Jangid wrote:
>> Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
>> facing a very strange problem. The monitor goes blank for a brief time,
>> like 1-2s and then comes back. It is connected with the GPU using
On Thu 27 Jan 2022 at 08:21:49 +, Tixy wrote:
> On Wed, 2022-01-26 at 19:26 +, Brian wrote:
> > On Wed 26 Jan 2022 at 10:42:38 -0600, David Wright wrote:
> >
> > [Snipping]
> >
> > > I've worked this way for 15 years and, unlike Gene, I'm not having
> > > to fight any battles over it. I'
On Wed, Jan 26, 2022 at 10:59:28PM -0600, David Wright wrote:
> On Mon 12 Apr 2021 at 11:26:49 (-0400), Greg Wooledge wrote:
> > On Mon, Apr 12, 2021 at 10:18:19AM -0500, David Wright wrote:
> > > I'm not using PS1 to test whether stdout is a terminal, but whether
> > > the file is running interact
Christian Britz writes:
> On 2022-01-24 12:44 UTC+0100, Richmond wrote:
>
>>> I've built Version 100.0.4845.0 (Developer Build) (64-bit) and it seems
>>> to be working fine here on debian 10.
>>
>> Not OK actually, it is very slow.
>
> The reason are probably enabled debug options.
>
> Personall
Pankaj Jangid wrote:
> Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
> facing a very strange problem. The monitor goes blank for a brief time,
> like 1-2s and then comes back. It is connected with the GPU using HDMI
> cable.
>
> During that 1-2s, the machine response is fine.
Tixy wrote:
>
> I can't see what the problem with DHCP is, if I want to have static IP
> addresses or use names to identify machines on the network, I can take
> a minute to add a line to dnsmasq.conf on my router. I know some people
> say that DHCP is a single point of failure, or they don't wan
On Thu, 27 Jan 2022, Vincent Lefevre wrote:
On 2022-01-27 11:41:44 +0100, Vincent Lefevre wrote:
On 2022-01-27 10:05:16 +0530, Pankaj Jangid wrote:
Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
facing a very strange problem. The monitor goes blank for a brief time,
like 1-
On 2022-01-27 11:41:44 +0100, Vincent Lefevre wrote:
> On 2022-01-27 10:05:16 +0530, Pankaj Jangid wrote:
> > Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
> > facing a very strange problem. The monitor goes blank for a brief time,
> > like 1-2s and then comes back. It is conne
On 2022-01-27 10:05:16 +0530, Pankaj Jangid wrote:
> Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
> facing a very strange problem. The monitor goes blank for a brief time,
> like 1-2s and then comes back. It is connected with the GPU using HDMI
> cable.
I had a similar proble
On 2022-01-27 11:16, Bijan Soleymani wrote:
On 2022-01-27 5:00 a.m., hdv@gmail wrote:
My guess is about once every week. The display is on for roughly 16
hours each day. There seems to be no discernable relation to "load".
At least not that I could confirm. I haven't found a link to a
specific
On 2022-01-27 5:00 a.m., hdv@gmail wrote:
My guess is about once every week. The display is on for roughly 16
hours each day. There seems to be no discernable relation to "load". At
least not that I could confirm. I haven't found a link to a specific
application either. This system is a general
On 2022-01-27 10:40, Bijan Soleymani wrote:
On 2022-01-27 4:23 a.m., Bijan Soleymani wrote:
Are you also connected via HDMI? I think I am using DVI to mini
display port.
I will have to check when I return home from this assignment in 2 weeks
time, but I am almost certain I am using DP. I see
Sorry, last word in last mail is wrong,
it should be inconvenience, not incontinence
Hi,the family of Cheryl Costello would love to donate to your
Organization,kindly provide me with your wire transfer information as soon as
possible.
PS: Kindly send your company TAX ID number for tax purposes
Thanks
On 2022-01-27 4:23 a.m., Bijan Soleymani wrote:
Are you also connected via HDMI? I think I am using DVI to mini display
port.
Seems the issues happens on windows and on HDMI but not DP:
https://www.reddit.com/r/AMDHelp/comments/ez2c4i/rx_570_screen_randomly_goes_black_during/
Two other cases
On 2022-01-27 4:06 a.m., hdv@gmail wrote:
You are not the only one. I see the exact same here. The system this
happens on has an RX560 graphics card. I have been seeing these
blackouts from the start on this configuration (more than 2 years now).
Interesting, I just checked and it turns out I
On 2022-01-27 05:35, Pankaj Jangid wrote:
Since I have setup a new hardware - x570 chipset, rx570 GPU - I am
facing a very strange problem. The monitor goes blank for a brief time,
like 1-2s and then comes back. It is connected with the GPU using HDMI
cable.
During that 1-2s, the machine respons
On Wed, 26 Jan 2022, Bijan Soleymani wrote:
On 2022-01-26 5:55 p.m., Bijan Soleymani wrote:
Actually apparently putty does support remote resizing. It just seems that
our systems lack the right termcap entries.
I managed to resize the putty window by running the command:
resize -s height widt
On Wed, 26 Jan 2022, Bijan Soleymani wrote:
On 2022-01-26 1:45 p.m., Tim Woodall wrote:
I have to use PuTTY to connect to a debian server. For reasons that are
outwith my control the ssh session disconnects every 24 hrs.
Therefore I run screen so after reconnecting I can recover to whereever
On Wed, 2022-01-26 at 19:26 +, Brian wrote:
> On Wed 26 Jan 2022 at 10:42:38 -0600, David Wright wrote:
>
> [Snipping]
>
> > I've worked this way for 15 years and, unlike Gene, I'm not having
> > to fight any battles over it. I'm sure mDNS is perfect for people
> > with different demands from
47 matches
Mail list logo
