Hello Brad,
thanks for this information. Sounds more then similar ;-)
I'm going to close my bug report
Bye
Hello,
someone else has the problem with hp-check since last update?
$ hp-check
/usr/bin/hp-check:630: SyntaxWarning: invalid escape sequence '\s'
lsusb_pat =
re.compile("""^Bus\s([0-9a-fA-F]{3,3})\sDevice\s([0-9a-fA-F]{3,3}):\sID\s([0-9a-fA-F]{4,4}):([0-9a-fA-F]{4,4})(.*)""",
re.IGNORECASE)
Tr
Hello team,
by installing NVIDIA drivers as per the guideline of Debian on Debian 12,
it shows an error as follows:
Building initial module for 6.1.0-21-amd64
> readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
> readelf: Error: Not an ELF file - it has the wrong magic b
Hello,
I want to understand the purpose of a service that I found on my personal
PC. it's mason.service, I am troubleshooting, some services and it shows
the following output with systemctl status mason.service:
● mason.service - LSB: Starts the mason firewall script
> Loaded: loaded (/etc/i
Hello everyone,
I am trying to follow the Debian's wiki about Secure Boot:
https://wiki.debian.org/SecureBoot
I've been able to carry out most of this one, from generating modules to
enrolling in the MOK cert, but it doesn't work the signing of the modules
as per the steps.
The only irregular sc
Hello team,
I would like to report unexpected behaviors in Debian 11 that it may
require to look into, I don't have the knowledge for now to get a clear
idea about what could happen, and this could be useful to make it visible
to keep in mind.
Context: I have Debian 11 in a HDD and Windows 11 in
or "mainline" Debian as distributed from *.debian.org.
Yes, a bespoke "Debian" image from the hardware vendor is, indeed, out
of the question. ARMbian is better, but I know and deeply trust the
Debian project and would prefer to use their releases over those from a
derivative like ARMbian.
Thanks,
Daniel G.
e story after a hard power-cycle. I guess
u-boot got clobbered after all?
Anybody here know how these installers were meant to be used? Has this
been documented anywhere?
Thanks,
Daniel G.
[1]
https://deb.debian.org/debian/dists/bookworm/main/installer-arm64/current/images/netboot/SD-car
x27;none'
> > >
> > > ```
> > >
> > > This is after I have done a dist-upgrade (was working fine before)
> > > debian trixie.
> > >
> > > error message says
> > > qemuBlockStorageSourceGetBlockdevFormatProps:1227 : in
resent them as
symbolic links?*
- Get *Linux*'s CIFS mounting to recognize junction points and simply
*suppr**ess them?*
(I've tried with both the administrative share for C: (C$) and a user-created
share of C:.)
Thanks,
Daniel
The first two things didn't work, but while I worked on a switch to
pipewire (with a limited success, since pipewire is experimental
in the current stable and misses important features that I need
and which are already available in pulseaudio), I stumbled upon
a workaround which fixed the problem
This is the following issue:
https://gitlab.xfce.org/xfce/xfce4-panel/-/issues/201
On 3/4/22 00:39, José Luis González wrote:
On Wed, 2 Mar 2022 17:30:38 +0500
"Alexander V. Makartsev" wrote:
On 28.02.2022 02:32, José Luis González wrote:
Hi,
Hi Alexander,
Upon upgrading to Debian 11, t
Hello,
I have an up-to-date Debian stable machine where pulseaudio becomes stuck
as soon as it is started (goes into an uninterruptible sleep). I couldn't
understand what is the cause for this behavior - maybe somebody can provide
an idea?
Initially, pulse worked as expected - the machine doesn'
Hi,
There is a severe bug on GNU Bash which is fixed in 5.1.16.
Bug info: https://lists.gnu.org/archive/html/bug-bash/2022-01/msg00020.html
While currently debian bullseye GNU Bash is 5.1.4.
--
Daniel Qian
Apache Committer(chanjarster)
blog：https://chanjarster.github.io
github：https
As I know, there are also bibg applications ported from DOS to linux
(like
doom), I thoughtm that would be easy - just start a cross compiler,
then fix
some issues, ready. But I believe, it is not that easy, I suppose, this
is a
lot lot lot work. And as far as I understood, code from DOS C is fa
Debian doesn't.
The rationale is that every OS would overwrite each others
"removable" EFI executable.
Best would be if your BIOS was preserving boot entries across upgrades
(BIOS flashing).
Please do not hesitate to reach out if we can help you test things.
Kind regards,
Daniel
On Tue, 5 Oct 2021 09:52:12 +0300
Andrei POPESCU wrote:
> > Yeah, that was it. I hadn't installed ALSA at all. I wasn't aware
> > that pulseaudio sits on top of ALSA.
>
> Because PulseAudio "sits on top of" ALSA it also depends on it. Some
> command-line tools for ALSA are not installed by de
Hi,
after installing Debian bullseye I can't get sound to work. I'm using
lightdm + dwm, and I have pulseaudio installed. "pavucontrol" ist stuck
on the message "Establishing connection to PulseAudio. Please wait..."
I don't understand zilch about how sound on Linux works, but my
previous version
t.
And that is still 88. Okay, thank you for explaining, I learned
something today :)
Am Sa., 4. Sept. 2021 um 15:02 Uhr schrieb Anssi Saari :
>
> "Daniel M." writes:
>
> > The debian package tracker (https://tracker.debian.org/pkg/firefox)
> > states that version 9
To my understanding, unstable has 91.0.1-1 and experimental has
91.0.1-2 as seen in https://tracker.debian.org/pkg/firefox.
ut not mixing debian suites - I usually
know what I'm doing. I've been running debian for over 10 years now.
This is the first time apt/dpkg is too high for me. Can anyone please
help?
Cheers,
Daniel
Hello,
since iOS upgrade to 14.5 last week I can not upload my photos to my samba
share (Debian/unstable) anymore.
I tried to increase logging and took a look to wireshark already but didn't
found the issue.
Anyone else has a problem with Samba since upgrade to iOS 14.5?
Thanks!
Bye
Hi There,
I am following up to check if you had a chance to review my previous email.
If yes, please email me with your requirements for the Counts, Pricing and
Samples for your review.
Regards,
Daniel
From: daniel rossie
Sent: Tuesday, October 20, 2020 9:58 PM
To: 'debian
r, e.g.,
enlarging a file system and for replacing a failed disk, already written
down saved a lot of time and headaches and avoided mistakes.)
Daniel
the above, leaving the majority unallocated. You can then grow
logical volumes as needed and the problem goes away.
Cheers,
Andy
Hi,
Four years ago I ran into two issues with the xen support in Debian - at
that time I forgot to report these issues back to Debian. Now, when
setting up a new machine I ran into the second of these issues (and it
turned out that the first one was still there).
Scenario: An Amd 3700X CPU o
Thanks, but that isn't really my question. Yes, we've looked at completely
overhauling our existing imaging infrastructure to avoid a bug with DHCP
autoconfiguration edge cases. That may be the route we go, but that is not
a trivial amount of work. The debian-installer FAQ declares that it was
de
Hello,
tl;dr: I want to add a script to be executed to the initrd used in pxeboot
to execute either in the case of DHCP autoconfig failing, or to subvert and
bypass the existing DHCP method entirely. I would like to do this by
replacing or modifying installation steps pertaining to configuring net
rhkra...@gmail.com wrote:
On Wednesday, April 29, 2020 12:49:53 PM Daniel Barclay wrote:
How do people not understand that the word "forum" does not exclude e-mail
or even non-digital communication (that "forum" does not mean only a
web-based forum)?
What word would you
Brian wrote:
On Wed 29 Apr 2020 at 12:20:37 -0400, Daniel Barclay wrote:
Andrei POPESCU wrote:
...
The best thing about a wiki is that anyone can edit it[1]. Having to
check with others first would, in my opinion, just hinder contributions.
Reverts are much easier to do than edits ;)
How
Andrei POPESCU wrote:
On Mi, 29 apr 20, 13:03:47, Daniel Barclay wrote:
Nate Bargmann wrote:
This topic has been on LWN.net for the past several days and should be
free to view in the next day or two: https://lwn.net/Articles/817668/
And subscribing is required even just to *see* the
at least ironic.
Daniel
ication (that "forum" does not mean only a
web-based forum)?
(It's like thinking "turf" means "artificial turf"--as did some local
newscasters who reported that some schools were changing their athletic
fields from turf back to grass. Huh?)
Daniel
ity (its higher probability).)
Daniel
What windows manager are you using. That has not been removed by mistake
has it?
On Mon, Apr 6, 2020 at 11:30 AM Bernard wrote:
>
>
> Le 06/04/2020 09:46, Andrei POPESCU a écrit :
> > On Du, 05 apr 20, 23:35:45, Bernard wrote:
> >>
> >> Le 05/04/2020 08:24, Andrei POPESCU a écrit :
> >>>
> >>>
So you say you can ping your local lan. That indicated your networking is
working.
are you using dhcp or static ip addresses
what is in /etc/resolv.conf
On Sun, Mar 22, 2020 at 5:16 PM Brad Rogers wrote:
> On Sun, 22 Mar 2020 13:02:07 -0400
> Felix Miata wrote:
>
> Hello Felix,
>
> >Just a
If you have installed debian then you can setup a mirror in
/etc/apt/sources.list. But that assumes you are at a debian terminal and
not some grub terminal. if you can ping out look in /etc/apt/sources and
edit that file
#
# deb cdrom:[Debian GNU/Linux 10.0.0 _Buster_ - Official amd64 NETINST
2
wrote:
> On Sun, 22 Mar 2020 14:57:47 +
> Daniel Harris wrote:
>
> Hello Daniel,
>
> >I would probably try a minimal debian stable (providing it works on your
> >new hardware) install and if that works then do a dist upgrade to
> >testing.
>
> I'l
I would probably try a minimal debian stable (providing it works on your
new hardware) install and if that works then do a dist upgrade to testing.
probably quicker than trying to debug your issue.
Good luck
Dan
On Sun, Mar 22, 2020 at 2:44 PM Brad Rogers wrote:
> Hello,
>
> For the first time
The only thing i can think of is that the
Can't open display
message is usually because you are trying to access an X app as root.
Maybe trying running the script when logged into to gnome as an
unprivileged/normal user
if that fails try using the alternative method of install by using the wget
m
I've tried to figure out this myself, but have been forced here. I need
to enable a feature which was added in git but not packaged for buster
yet, I have exactly the same problem with Ubuntu Bionic. I would like to
make unstable packages of this for releasing to raspberry PI also.
I've tried
Daniel Harris
wrote:
>
>
> On Thu, Jul 11, 2019 at 5:24 PM Felix Miata wrote:
>
>> Daniel Harris composed on 2019-07-11 15:39 (UTC+0100):
>>
>> > Need some help. My screen goes black if login to any other desktop
>> > environment other than Gnome, even gnome
On Thu, Jul 11, 2019 at 5:24 PM Felix Miata wrote:
> Daniel Harris composed on 2019-07-11 15:39 (UTC+0100):
>
> > Need some help. My screen goes black if login to any other desktop
> > environment other than Gnome, even gnome-xorg only shows a black screen.
>
> > I
Hello Guys
Need some help. My screen goes black if login to any other desktop
environment other than Gnome, even gnome-xorg only shows a black screen.
I have a nvidia graphics card but i am only using standard debian, no
non-free repos.
Can anybody help as i have not played around with the os s
I had a simular problem with a san disk 128 gb ssd but during a fresh
install of debian 9 on a dell E6230 laptop. Before the install the ssd was
wiped totally and overwritten several times including mbr. This leads me to
the conclusion that there is something hindering grub, maybe on a
controller c
es.d/cyrus-imapd.conf if
> you're *not* using systemd, see above.
I'll keep it in mind.
Thank you very much for your time.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
--force --update --add cyrus lmtp 750
/var/run/cyrus/socket
--
But I have noticed that after doing a reboot I have this problem again.
Any idea what could be a definitive solution? Maybe I'm missing
something here?
Thanks in advance.
Kind regards,
Daniel
signature.asc
Description: Op
r/lib/cyrus/tls_sessions.db and the migration process did not do the
corresponding conversion. Any ideas that can bring more light?
The associated problem is that because of this it seems that Postfix can
not deliver the mails since there is no /var/run/cyrus/socket/lmtp.
Thanks in advance.
Ki
On 23/11/2018 03.09, Daniel Fishman wrote:
Hello,
I am trying to install Debian on a 4TB external HDD, and want to be able to
boot it both on UEFI and BIOS systems. Using a simple BIOS/GPT configuration
(GPT partitioning with BIOS boot) didn't work out - after receiving some
important tips
Hello,
I am trying to install Debian on a 4TB external HDD, and want to be able to
boot it both on UEFI and BIOS systems. Using a simple BIOS/GPT configuration
(GPT partitioning with BIOS boot) didn't work out - after receiving some
important tips from this mailing list about problems that I had
Can you try to create all the partitions through Debian's installer. I
have a suspicion that partition type may be wrong for BIOS partition.
You have specified ext2 as file system for BIOS grub which may mean
Linux partition instead of BIOS grub partition (ef02 BIOS boot).
In the end, it wa
I'd expect that Grub won't be able to reliably work with that setup -
partition 3 goes past the 2TB mark, so the BIOS won't be able to map
it properly. Don't forget, when grub is reading the disk all it can
rely on are BIOS calls. Add yourself a small-ish /boot partition first
and you may be OK.
Hi Daniel,
in case of BIOS and GPT you have to create a partition for second stage
of GRUB. If I can remember correctly its size should be less than 50MB.
HTH
Kind regards
Georgi
I created it - this is the first partition (the one with bios_grub flag).
I did things similarly to the
Hello,
I am trying to install Debian on a 4TB external HDD. Since I want
to boot the HDD (also) on old systems which support only BIOS,
and since the HDD is larger than 2TB, I decided to go with GPT
partition table and BIOS boot (or, in other words: BIOS/GTP).
I partitioned the HDD accordingly (s
number of times and nobody
seems to know why, any suggestions would be appreciated. The official
screenshots page shows it as I have explained above, though I have
Recommended updates (stretch-updates) selected :
- https://screenshots.debian.net/package/software-properties-gtk
Many thanks
Daniel
thunderbird without losing embedded support for gnupg?
> This is discussed in bug #909000[1], you may want to subscribe to it.
>
> 1. https://bugs.debian.org/909000
Thanks for the reference in Debian BTS. The weekend I was looking for if
there was an open issue but I didn't find it. I
be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 8 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
--
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
Hey there,
I'm having this error too, on my KDE Neon System as well as on my (now)
Arch System. It works most of the times, but not all.
Did you finally manage to find a solution, Rainer?
--
Daniel
personalized events in KOrganizer but I have not been able to get it.
Any clues would be appreciated.
Thanks in advance.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
ling the process directly.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
or default
> device etc)
>
> If nothing helps remove ~/.pulse directory and reboot or login again or kill
> pulse server (it should respawn)
Killing the 'pulseaudio' process solved the problem. Good to have sound
again :)
Thanks to all for your interest.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
Hi, Ben.
On 10/04/18 19:51, Ben Caradoc-Davies wrote:
> On 11/04/18 10:15, Daniel Bareiro wrote:
>> From one day to the next I ran out of sound in Debian Stretch. It's
>> strange because I don't remember making any changes and everything was
>> running without prob
I was also looking at the settings with the ncurses interface provided
by "alsamixer -c0". "Master", "PCM" and "Speaker" is at maximum, unless
I'm missing something. Here some screenshots:
https://ibin.co/3xx7l69DriYy.png
https://ibin.co/3xx8ERkqHJwW.png
https://ibin.co/3xx8ac8djtS4.png
I also tried setting "Internal" to the maximum, but it made no difference.
Thanks for your reply.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
ot able to hear any sound neither
by the speakers nor by the headset.
Has anyone experienced something like that and has some clue how to fix it?
Thanks in advance.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
ith the use of XRender or if only using
XRender is enough.
I will also try the solution you suggested, purging the package
xserver-xorg-video-intel and renaming 20-intel.conf.
Thank you all for your interest. Much appreciated.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
On Sat, Mar 24, 2018 at 04:20:48PM +, Daniel Keast wrote:
> On Sat, Mar 24, 2018 at 03:26:03PM +0100, Hans wrote:
> > Am Samstag, 24. März 2018, 14:58:41 CET schrieb Daniel Keast:
> > Hi Daniel,
> >
> > maybe I am wrong, but I believe, that the problem might be y
On Sat, Mar 24, 2018 at 03:26:03PM +0100, Hans wrote:
> Am Samstag, 24. März 2018, 14:58:41 CET schrieb Daniel Keast:
> Hi Daniel,
>
> maybe I am wrong, but I believe, that the problem might be your hardware.
>
> Some hardware is not capable on opengl2, only on opengl1.
ring right now, software is perfectly
fine... it'd just be nice to have some idea of what's going on. Any chance
anyone could shed some light on this for me?
--
Daniel Keast
signature.asc
Description: PGP signature
ike this:
Total amount processed: 193
without changes: 196
new identifiers: 14
new subkeys: 14
new signatures: 3201
These 'signatures' are new public keys?
Still Thunderbird is showing the expired key. Should I restart it to
take the changes?
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
t; HT capable machine, so that it keeps the threads together.
>
> Does any of this matter?
I think these 2 VCPUs can run on any core however you can configure the
affinity of processors by limiting the execution using taskset.
By the way, it looks like your GPG key is expired.
Kind regards,
Dan
ree
I am using this configuration without problems. In fact, yesterday I got
the update to Stretch 9.4 with this configuration.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
Hi, Felix.
On 10/03/18 19:11, Felix Miata wrote:
> Daniel Bareiro composed on 2018-03-10 13:42 (UTC-0500):
> ...
>> hardware: a Thinkpad T530.
>
>> About five days ago, after researching the Internet, I tried adding this
>> configuration in Xorg:
>
>> --
On 10/03/18 16:09, Brad Rogers wrote:
> Hello Daniel,
Hello, Brad. Thanks for your reply.
>> I would like to know if anyone had this problem and was able to solve it
>> in some way. If you have resolved it definitively, I would appreciate if
> Read the answers posted t
hromium and today I had
it several times with Firefox while watching some videos.
It's kind of annoying because I have to close the application and open
it again.
I would like to know if anyone had this problem and was able to solve it
in some way. If you have resolved it definitively,
like to know if anyone had this problem and was able to solve it
in some way.
Thanks in advance.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
mails but
they still appear.
Thanks!
Daniel
Thank you for the advice,
tv.deb...@googlemail.com writes:
> On 28/01/2018 20:25, to...@tuxteam.de wrote:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> On Sun, Jan 28, 2018 at 02:04:54PM +, Daniel Nemenyi wrote:
>>> Dear all,
>>>
&g
4:00.0: bus: MMIO write of 807e FAULTat 100c1c
... and then normal boot.
Is this a sign of the end of my laptop or SSD or is there something I
can do?
Thanks
Daniel
Hi, again.
On 08/01/18 10:28, Daniel Bareiro wrote:
>>> I recently updated my firewall from Jessie to Stretch and I realized
>>> that the check_lm_sensors plugin was apparently not working because it
>>> was not possible to get the temperature of one of the disks
b" and check again.
Thanks for your reply and your time.
It seems that this file is not available:
---
root@alderamin:~# /usr/sbin/update-smart-drivedb
bash: /usr/sbin/update-smart-drivedb: No existe el fichero o el directorio
---
I loo
On 01/07/2018 07:47 PM, Boyan Penkov wrote:
> and a backport (4.14.0-bpo2) -- in light of meltdown --
To avoid a false sense of security: according to [1], [2], [3], the
current stretch-bpo kernel (linux-image-4.14.0-0.bpo.2-$arch) does *NOT*
yet include any mitigations against meltdown.
Dan
l changed from 59 to 58
So I'm not sure where the problem may be. If it is in smartd (and
hddtemp is based on smartd) or maybe in some kernel module.
Any thoughts will be greatly appreciated.
Thanks in advance.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
mala...@elude.in writes:
> how can i check the shortcut (default) ?
> e.g. [browser : www] does not work but [browser : firefox] does ; btw why
> have i 2 versions : firefox & firefox-esr ?
> & crtl+alt+t does not start the terminal but [run command prompt : alt+f2]
> works.
In Gnome, try going
GtkNotebook
(nm-connection-editor:28348): Gtk-CRITICAL **:
gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkNotebook
** Message: Cannot save connection due to error: Invalid setting
802.1X Security: missing EAP password
** Message: Connection validates and can be saved
Se
wops, forgot the screenshot, silly me
2017-10-19 14:39 GMT+02:00 Daniel :
> Hello,
>
> I'm using debian 9 up to date.
>
> Desktop Environment: Gnome
>
> Scenario: Where I work we connect to the network with Ethernet and
> 802.1x peap authentication. Each X days pass
not hesitate to ask.
Thanks in advance!
--
Daniel Ferradal
IT Specialist
email dferradal at gmail.com
linkedin es.linkedin.com/in/danielferradal
as I saying again?
> > IIRC, the higher the frequency, the higher the energy in those waves--thus
> > the
> > more likely to have an effect.
> >
> >
>
>
> --
> "A simpering Bambi narcissist and a thieving, fanatical Albanian dwarf."
> Christopher Hitchens, commenting shortly after the nearly concurrent deaths
> of Lady Diana and Mother Theresa.
>
--
Daniel Keast,
Hatherleigh, UK
signature.asc
Description: PGP signature
time you'll have a broken insecure system.
https://wiki.debian.org/DontBreakDebian#Don.27t_make_a_FrankenDebian
Buster probably wont become stable until about 2019.
--
Daniel Keast,
Hatherleigh, UK
Google Debian repository.
> It's up-to-date and it works for Jessie.
Thanks for the suggestion. I did not know they had a repository
published. The times I installed Chrome were downloading the Debian
package. But maybe this automatically adds an entry in
/etc/apt/source.list.d.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
mple some WebRTC application such
as Jitsi Meet).
Thanks for your reply.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
tting
security updates?
Thanks in advance.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
Dear Karen,
Musescore is not included in the default debian install but it is
available in the repositories, so you can easily install it if you so
wish. See:
https://packages.debian.org/stretch/musescore
Warm regards
Daniel
Karen Lewellen writes:
> Hi everyone,
> Keeping this quest
questuons are answered there is a
"dummy punishment" that every thing is erased instantly.
This has made me mad.
Is there a more
automated way? A small program
that will automatically catch hard to
find mumbo jumbo.
Sincerely
Daniel C
" and it installed only that package. So I assume that the
dependencies would already be satisfied with the other packages I had
installed.
root@orion:~# aptitude show gnupg | grep Versión
Versión: 1.4.18-7+deb8u3
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
is already solved.
Thanks too, Frank, for your contribution. It seems that now it is
possible to install it without making the change in sources.list that
you had suggested.
Kind regards,
Daniel
signature.asc
Description: OpenPGP digital signature
On 31/07/17 07:39, Daniel Pocock wrote:
>
> Hi all,
>
> I've recently had discussions with new users at various events who were
> installing Debian for the first time, usually on laptops.
>
> It is easy enough to run the installer and get Debian up and running.
&g
as a developer, what is proposed for non-developers?
Regards,
Daniel
1 to restore full compatibility.
But I still don't see the update available. Do you see it?
Kind regards,
Daniel
he
> Thunderbird update, I've refrained from applying it.
>
> Has anyone other than Daniel applied the jessie Thunderbird update? and, if
> so, did you also lose access to enigmail? (It seems strange that there hasn't
> been a whole chorus of people chiming in to
to be compatible with Thunderbird 52 [1].
> Enigmail 1.8.2 is compatible with Thunderbird 29.0 to 46.0. That's why
> it was running on the previous packaged version of Thunderbird 45.x.
> Daniel, if I were you I would try to uninstall the enigmail package and
> then add the newe
Hi again, Georgi.
On 25/07/17 20:21, Daniel Bareiro wrote:
>>>> I'll try to sign this message because I have not used Enigmail for a
>>>> long time.
>>> Thanks for trying this. I appreciate it. Did you manage to sign it?
>> Yes, I signed the mes
1 - 100 of 4967 matches
Mail list logo
