lsmod is reporting the below under kernel 2.6.0test9 The kernel is
running on a sarge box that is updated for all packages as of 11/18/2003
@ 12:50AM
what is QM_Modules? what does this mean? is there a fix?
thank you.
=>lsmod
Module Size Used byNot tainted
lsmod: QM_MODU
Could I ask about the complete specs and costs of what you put together?
I have been eye'ing the Asus A7V600 also. These are the parts I was
looking at.. Off www.newegg.com
$130SAPPHIRE ATI RADEON 9600 256MB 8X AGP
But sarge has xfree 4.2 and 4.3 is needed for readeon
$210
Also, check out these sites that will test for an open relay:
http://ordb.org/submit/
http://www.abuse.net/relay.html
from your mailserver:
telnet relay-test.mail-abuse.org
=
= Management is doing things right;
Yes NFS is running.. thoguht NFS was UDP not TCP
netstat -natlp shows the process as "-"
a process of "-" huh?
the pid0 issue loooks like:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=217525
Michael Stone wrote:
On Sat, Nov 08, 2003 at 10:25:43AM -0600,
0.0 0.0 00 ?SW Aug31 2:54
[kupdated]
Florian Ernst wrote:
Hello Hanasaki!
On Sat, Nov 08, 2003 at 10:16:34AM -0600, Hanasaki JiJi wrote:
How do i find out what is using those ports?
netstat -natl | grep 799
tcp0 0 192.168.1.200:
How do i find out what is using those ports?
netstat -natl | grep 799
tcp0 0 192.168.1.200:799
192.168.1.1:2049ESTABLISHED
below returns no output
lsof -i tcp:799
Nothing is using the port but it is in netstat
--
To UNSUBSCRIBE, email
Anyone have/working on integration of these?
clam spamc and amavis are installed however, they dont seem to update
the /etc/exim4/conf.d
thank you.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Actually, the complete system specs and issues encountered would be very
appreciated.
Thanks
Ron Johnson wrote:
On Wed, 2003-11-05 at 23:52, Kent West wrote:
Hanasaki JiJi wrote:
What motherboards have people had success/failures with for woody and
sarge and Bartons with a 400fsb?
Which mobo
What motherboards have people had success/failures with for woody and
sarge and Bartons with a 400fsb?
Which mobo chipsets have you had good/bad experiences with?
amd?
nvidia?
via? kt600?
And with which kernels? I guess the woody distribution kernel would
need to run ok
DCsmarthost = DEBCONFsmarthostDEBCONF <= SAME
./conf.d/router/200_exim4-config_primary:
route_list = * DCsmarthost <= SAME
Vineet Kumar wrote:
* Hanasaki JiJi ([EMAIL PROTECTED]) [031031 15:29]:
1. when did exim4 make it into sarge?
http://packages.qa.debian.org/
1. when did exim4 make it into sarge?
2. cool config stuff
3. smarthost configuration is working fine using the IP of the
smarthost. It fails when I put in the hostname of the smarthost.
"hostname smarthost" does return the IP. What could be wrong and how
can it be fixed?
thanks
--
To UNSU
Just did an apt-get update; apt-get dist-upgrade
dhcp3-client seems to be mutaully exclusive with samba/samba-common.
Installing one takes out the other.
--
=
= Management is doing things right; leadership is doing the =
=
Anyone know of hardware / software (prefer free) for:
wireless telephone
tcp/ip with a gateway to the POTS
multi-line
w/ digital answering machines - stores to disk
web interface for management and voice mail listening
programable VRU (java prefered o
just updated to gnome2 in sarge with an:
apt-get update
apt-get distupgrade
worked like a charm, till a logout / login
gdm tried to login my id and something failed and send me back to gdm.
nothing in the log files. same result from startx from the cmd line.
deleted ~/.xinitrc a
Any news on when gnome2 and/or gtk2 will be in sarge? sarge recently
got xchat2 which needs gtk2. sarge is still on gnome1.4 and gtk1
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
The views seem to be gone.. in sawfish-ui add more "workspaces" this
will get more desktops. still wondering if its normal behavior and a
enhancement to sawfish or i broke something.
Jeremy Brooks wrote:
On Tue, 2003-05-27 at 20:32, Hanasaki JiJi wrote:
Just did a dist-upgrade on
Just did a dist-upgrade on sarge and gnome sawfish no longer has the
panels / menus on the borders.
is it broken in sarge? did i break something?
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
"book2" so the other thread isn't hijacked.
What are the pros/cons of usin Grub vs Lilo? Lilo vs Grub?
I have had great success with SystemCommander+PartitionCommander (not
free and not expensive). Tried using lilo the other day with no issues.
Tried switching over to grub with apt-get inst
sarge says to use foomatic instead of cupsomatic-ppd. cupsomatic works
like a charm. with just foomatic, no printes were available in the
webinterface. the foomatic-compiledb built the drivers in /boot (Dam)
and they still were not available via the web interface.
===
Package: cupsomatic-ppd
www.openoffice.org works great.
apt-get install ooqstart-gnome <= quick starter from sarge
doesnt look like there is a package to install openoffice directly
Jimmy wrote:
hey,
whats a good office program, mainly one i can get though
apt-get, i like koffice but i will not let me install it.
What causes the below and how can it be fixed? what is the impact of
the below?
debian version = sarge
Thanks,
rpc.mountd: couldn't rename /var/lib/nfs/rmtab.tmp to /var/lib/nfs/rmtab
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTE
http://spambayes.sourceforge.net/
Anyone used it? thoughts?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Integrated Printer/FAX/Copier machines supported by Linux???
Anyone know of one of these beasties that works with linux? Debain?
incoming / outgoing fax
scanner
printer
google didnt turn much up
Thank you
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "u
Anyone know of free/opensource software that will function as a server
for the Mozilla calendar?
Just found the client tool in the nightly build -svg- build.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
The package name is just that "a name" It shouldnt contain a version
number. If there is a need to be able to manipulate multiple versions
of the same package then the functionality needs to come from the
package manager. Perhaps no version specified = most current.
Steve Lamb wrote:
On Sat,
is it safe to take a harddrive, with data on it, out of one system and
put it in another?
ide?
scsi?
--
=
= Management is doing things right; leadership is doing the =
= right things.- Peter Drucker
Try the free cygwin download:
http://www..cygwin.com/
Kevin Coyner wrote:
On Sun, Mar 16, 2003 at 05:12:09PM +, Shri Shrikumar wrote..
On Sat, 2003-03-15 at 22:09, Jack Pistachio wrote:
I'd suggest ssh, sftp, and scp, which all come in the
debian ssh package. To use these with windows,
Why does foomatic-compiledb put the compiled files in /boo/ppd ?
It just doesnt seem right
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Any .deb repositories that have cpu arch specific support?
I hear it can be a 10-20% boost
Rene Engelhard wrote:
Hi,
Sven Hoexter wrote:
On Mon, Mar 10, 2003 at 02:10:37AM -0500, sean finney wrote:
On Sun, Mar 09, 2003 at 06:30:30PM -0700, Pete Ashdown wrote:
Has anyone know of a method for m
Anyone running woody/sarge on a Barton? Is the extra cost worth it for
a Barton vs 2500+XP
What motherboard/RAM/Fan... are you using?
What about memory heatsinks? worthing or not? which ones?
I was thinking of the following system:
ASUS A7V8X LAN
AMD ATHLON XP 2500 "Barton" 333
IMO, yes.
Although, I use "sarge" not "testing" to be sure that I dont
inadvertantly upgrade to the next version of testing by accident.
M. Kirchhoff wrote:
Once I've got the Stable release of Woody running, is the best way to
move up to the Testing level to simply change my to point
to
http://
Any recommendations on 6in1 media readers / writers that work in sarge
and the kernel 2.4.20 kernel?
--
=
= Management is doing things right; leadership is doing the =
= right things.- Peter Drucker
any recommendaton readers/writers?
3.5" or 5.25" front panel inserts prefered
also, what does it take to get it functional in linux? do they show up
as a floppy drive to mount?
thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROT
Downloaded the and installed the Sun JDK and mozilla. ln -s to the
plugin has always worked in the past... now it is giving the below
unresolved errors. Debian version = sarge. It worked in the past but
hasnt worked since a total reinstall.
How can I find the missing package that has the .so
Take a peek at Ant from jakarta.apache.org
- make functionality
- written in Java
- no tab/space issues of Make
- makefile of make = buil.xml of Ant
- that's correct. ant "makefile"s are written in xml
Dave Carrigan wrote:
On Thu, 2003-01-23 at 06:33, Benedict Verheyen wrote:
When you sa
www.netbeans.org
not in a .deb and very easy to install
Derrick 'dman' Hudson wrote:
On Wed, Jan 22, 2003 at 05:56:36PM -0300, Eduardo Gargiulo wrote:
| Is there any IDE for java (debianized if possible). Which?
It's called "debian". :-). I use vim as the editor, make for build
management (a
eterm and feh, on sarge, are reporting invalid archive signatures of
their dependancies.
I have tried the US and Japan mirrors.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
anyone have a config for amd to automount home dirs? off redundant
hostnames?
in amd, when fileserver:/exports/[export1] is automounted, the
files/dirs in [export1] are accessable but not viewable in a "ls" Any
way to change this?
ex:
automount fileserver:/exports/dir1 to
/mnt/dir1
ls /mn
A bit off topic here.. sorry
Others ahve expressed problems with Asus based on memory issues. Anyone
have any thoughts?
The recent comment was on the A7V8X being very picky with RAM. My
friend picked up a different KT400 based system and popped in the same
PC2700 (not PC3200) that didnt work
I was trying to install:
metal
sawmill
and discovered that they are mutually exclusive. metal wants gconf2 and
sawmill wants gconf.
Does this mean that sarge sawmill is gnome1? Any way to get both?
--
=
= Management is doing thi
running a dhcp client that may be overwritting it?
Nori Heikkinen wrote:
as root, i modified the "search" line in my new box's /etc/resolv.conf
to include a few more domains i want searched. the changes persist
anywhere from two minutes to two hours, but it always seems to get
overwritten with t
Does woody / sarge support the ASUS A7V8X with KT400 chips and
Broadcom10/100 onboard Chip? If not, any way to support it?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
cat interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet static
address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
Any recommendations on Audio Video digital capture / playback hardware
and software woking on Woody / Sarge?
--
=
= Management is doing things right; leadership is doing the =
= right things.- Peter Drucker
Ran into this sometime back myself.. it was related to gdm options.
something about a -nolisten option
James Tappin wrote:
On Thu, 2 Jan 2003 02:12:34 -0800
"Kevin" <[EMAIL PROTECTED]> wrote:
FYI
If I try xhost +localhost
xhost: unable to open display "debian:0.0"
3 alternatives spring to
ArgoUML-0.12 Runs fine on this:
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1-b21)
Java HotSpot(TM) Client VM (build 1.4.1-b21, mixed mode)
downloaded and installed directly from java.sun.com
Oki DZ wrote:
Hi,
I'd like to run ArgoUML; unfortunately, the JVM (Sun's; 1.4.1 beta)
w
I used to compile ide-scsi as modules and had problems with the
CD-RW-Drive locking closed .
Since compiling the modules into the kernel, there have been no lock
problems.
Shawn Lamson wrote:
On Sun, 29 Dec 2002 20:12:48 -0500
Shawn Lamson <[EMAIL PROTECTED]> wrote:
On Sun, 29 Dec 2002 11:27
Running woody and gnome here with esd. How can xmms, gnome, xine .. be
configured to use sound from the kernel instead of esd? There seems to
be three types of sound support: arts/esd/kernel is there a good
overview of each of these and how to get gnome to use them? pros/cons?
motherboard =
Anyone able to boot and run debian woody on a kt400 based board? the
hope is that it will boot and run ok just so i can do an
install and build kernel 2.4.20 this kernel says it has some kt400
support. It also appears to be compatible with the binutils of woody.
Thanks
--
To UNSUBSCRIBE,
Any thoughts on overall performance if the following systems? The key
factors are:
1. Support by Woody out of the box
2. Will the single processor systems be faster because the memory is
slower on the duals?
3. Is onboard video better/faster due to better bandwidth?
Dual Athlon 2400MP and PC210
Hello all,
I am seeking your input on video cards. The goal is to upgrade from the
current voodoo3500tv
What is the minium chipset in NVidia/ATI that has slightly more power
than the voodoo3500tv?
Which AllInWonder's are supported by Woody?
Which NVidia chips are supported by Woody?
Any tho
the irc server is dropping my connection with the error "Bad User Info"
I am connecting with Xchat via http proxy. I has worked until recently,
Connections with bitchx from the firewall work fine
How can I connect to the server and not get this error? what is the cause?
Thanks
--
To UNSUBS
Anyone have any luck / tips for getting boards like the below to run on
woody? Including the Video Capture? Any tips for audio capture?
Thanks
http://www.leadtek.com/graphics/a250ultratd-myvivo/a250ultratd-myvivo.htm
--
=
= Managem
Any thoughts as to why my system would be beeping? Its the speaker
inside the case. The speakers are off and the Linux sound control is
muted. When mute is off, the beeps come from the speakers.
Thanks
--
=
= Management is doing
the irc server is dropping my connection with the error "Bad User Info"
I am connecting with Xchat via http proxy. I has worked until recently,
Connections with bitchx from the firewall work fine
How can I connect to the server and not get this error? what is the cause?
Thanks
--
To UNSUBSC
Any input on building systems that support hotswap and 5 9's uptime?
What hardware? drivers? where to get them? costs?
Thanks
--
=
= Management is doing things right; leadership is doing the =
= right things.- Peter Dru
Any input on building systems that support hotswap and 5 9's uptime?
What hardware? drivers? where to get them? costs?
Thanks
--
=
= Management is doing things right; leadership is doing the =
= right things.- Peter Dru
I have two Debian Woody (kernel 2.4.19) systems NFS mounting (v3) off
the same NFS server. Suddenly, one of the systems is reporting the
below error. This happens quite offen and is usually, but not always
preceeded by a file save, from Open Office, over the NFS mount. The
other computer does no
Its the latest 2.5.45 Appologies for not mentioning this.
The below error seems to indicate a broken makefile, doesn't it?
Justin Ryan wrote:
Any ideas about the below error? It is from the kernel.org download
2.5.44? if not, recommend you grab the latest..
make menuconfig
make -f script
Any ideas about the below error? It is from the kernel.org download
make menuconfig
make -f scripts/Makefile.build obj=scripts lxdialog
scripts/Makefile.build:10: .config: No such file or directory
make[1]: *** No rule to make target `.config'. Stop.
make: *** [menuconfig] Error 2
--
==
Would someone be kinda enough to point out a reference to accomplish the
following?:
- Only assign give DHCP to hosts authenticating in some manner
- Auth against LDAP and/or localfile
- some hosts get the same IP every time based on their auth
- not based on their MAC
- some hosts get
Is there any way to assign the alias'ed eth1 interfaces via DHCP? How
about locking an IP to each that is assigned via DHCP (I guess this isnt
possible since pre-allocated DHCP addresses are done via MAC addy)
Alan Chandler wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Sunda
I am running the Woody version of wine. The application being run is
Visual Page2 (EOL'ed) The problem is that the "mouse up" event is not
going to windows. Thus, after pressing the R-Button, the application
thinks I never release it. Various params have been tried in the Wine
config, incl
Any thoughts on why portscans are showing up in the alert log but not
the portscan log?
Thanks.
--
= http://www.sun.com/service/sunps/jdc/javacenter.pdf=
=www.sun.com | www.javasoft.com | http://wwws.sun.com/
What MB's have people used with Woody successfully, unsuccessfully?
Thanks
--
= http://www.sun.com/service/sunps/jdc/javacenter.pdf=
=www.sun.com | www.javasoft.com | http://wwws.sun.com/sunone =
= _
I have just installed the opendlap 2.x from Woody.
anonymous binds connect but fail to list the root just giving the schema:
Root DSE
objectClass top
objectClass OpenLDAProotDSE
binds as the adim fail to bind
ldap client used:
http://www.iit.edu/~gawojar/ldap/
apt-get kernel-package
read the readme in /usr/share/docs/kernel-package
follow the instructions
Mariano Kamp wrote:
> If the below describe assumption was true then it didn't work out. I
> have the same problem.
>
> Mariano
>
> On Sat, 2002-09-28 at 16:33, Mariano Kamp wrote:
>
>>Which one is
I would not assume that the settings are the same.
Run 'make menuconfig' and check
Be sure of the following are compiled into the kernel:
ext2, ext3, reiserfs
ide & scsi support for your ide/scsi chips/boards
Verify that your lilo.conf has the right settings for partitions and
On Thursday 19 September 2002 09:10 pm, Hanasaki JiJi wrote:
>
>>I am having some problems with the Teac drive. It seems to work the
>>first time but then the drive bay locks and there is no way to open it.
>> Reboot required. cdrdao unlock doesnt even work.
&
Any input on what to use for hardware and capture / playback software?
I am hoping for only open source. I know that leaves NVidia out due to
the closed drivers. How about ATI?
Thank you.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAI
I am having some problems with the Teac drive. It seems to work the
first time but then the drive bay locks and there is no way to open it.
Reboot required. cdrdao unlock doesnt even work.
Any thoughts on this? Thanks.
output of cdrecord -scanbus
'TEAC' 'CD-W54E ' '1.0A' Re
Could people share their thoughts on what hardware and software can be
combined to provided the following functionality?
- all free & open source - drivers and applications
- SVideo in/out
- optical audio in/out
- play DVD's from disk, harddrive or over TCP/IP
Alt Tab is no longer cycling through the windows in Gnome on Woody Gome
with Sawmill. I have checked the configuration and it looks OK. Alt
continue to work.
Any ideas? thank you.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROT
Crashes looking like what? Systems here have it installed from the
openoffice.org download.
- First run = exits
- 2nd run = all is good
Vittorio wrote:
> I don't know if it is a bit OT, anyway.
>
> Using the deb packages found in www.linux-debian.de I've just
> installe
Does Woody allow non-root id applications to to PAM auth?
Thank you.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Does Woody allow non-root id applications to to PAM auth?
Thank you.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
1:30:17 -0500, Hanasaki JiJi wrote:
>
>
>>I am running exim built under Debian Woody.
>>
>>Where can I find the docs to configure pam.d/exim to authenticate for
>>exim? the log says "cant find moudle"
>
> [...]
>
>>Exim 4.x was built with PAM sup
I am running exim built under Debian Woody.
Where can I find the docs to configure pam.d/exim to authenticate for
exim? the log says "cant find moudle"
Any input on how to config PAM so exim can find it? exim 3.x did PAM
fine. The same entries are still in /etc/pam.d/...
Exim 4.x was built
Anyone know of one?
Thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I have looked at the log files. What am I looking for that will
indicate accelerated or not accelerated? What do I need in my Xconfig
file to tell X to do hardware acceleration?
Thanks.
Adam Majer wrote:
Hi,
On Wed, Jan 09, 2002 at 05:20:42AM -0600, Hanasaki JiJi wrote:
I am thinking
I am thinking that my machine is not using acceleration. It is an
athlon 600 with a voodoo3500. Graphics seem to be slow and take the CPU
to over 75%. This even happens when moving an opaque window. My
XFConifg-4 file is pasted below. Could someone help me with
understanding what could be
"ntpdate time" is giving the the following error. "time" is my server
running ntpd from woody.
---
The ntpd on the machine "time" is storing the following in syslog:
Jan 9 10:01:58 portal ntpd[32724]: ntpd 4.1.0 Sat Dec 15 09:33:44 UTC
2001 (2)
Jan 9 10:01:58 portal ntpd[32724]: s
It's running fine for me :) The below is from 1.4B2 but I had 1.3.x
running fine prior. What specifically do you observer when "it doesn't
work"? Send the output of errors and what you entered to the
debian-user list.
[EMAIL PROTECTED]:[52]~ java -version
java version "1.4.0-beta2"
Java(TM)
Along the same lines... Is there any good software that will allow me to
take full advantage of some of the multimedia cards that have full A/V in
and out? And also backup a DVD. Just in case the original gets scratched?
Christian Schoenebeck wrote:
-Ursprüngliche Nachricht---
What is the difference between
pump
dhcpcd
dhcp-client
any others?
Raghavendra Bhat wrote:
Subject:
Re: dhcp-client
From:
Raghavendra Bhat <[EMAIL PROTECTED]>
Date:
Fri, 30 Nov
Make sure that you have compiled the ide and ext2 into the kernel and not
just made them loadable mods.
Xeno Campanoli wrote:
Subject:
Kernel panic: VFS: Unable to mount root fs on 01:00
From:
Xeno Campanoli <[EM
Wow!! great overview .. AFter all of that... Which do you recommend and
why? Do any of them interoperate with each other? My CISCO client runs
fine over TCP with ipchains NAT.
nate wrote:
Subject:
Re: VPN software
From:
"nate" <[EMAIL PROTECTED]>
Date:
Wed, 28 Nov 2001 13:48:34 -0800 (PS
I have lilo setup to boot into a high resolution vga screen resolution.
It comes up fine; however, somewhere in the middle of the boot
process, maybe when teh framebuffer drivers are loaded, it switches back
to a lower resolution - standard res?
1. what would cause this?
2. how can it be pr
hmm Putty must fall back to v1 w/o saying anything..
Guess that leaves us with:
1. when is woody going gold? lol i know the answer no flames pls
2. i will look for .debs or build openssh myself.
Thanks all
dman wrote:
On Sun, Nov 25, 2001 at 08:52:38PM -0600, Hanasaki JiJi wrote:
| Potato&#
Potato's version of ssh says invalid option. I have putty >win ssh
client< set to protocol 2 and it works against the server fine.
Pollywog wrote:
On 2001.11.26 02:33 Hanasaki JiJi wrote:
how do i get potato sshd to ignore v1 connections?
in /etc/ssh/sshd_config at the top
how do i get potato sshd to ignore v1 connections?
I am not getting anything in syslog :(
How can I record ssh login / logout / bad passwd
How can I record all scp ops and bad passwds
Thanks,
Yup I have a "hdd=ide-scsi" Actually its hdc.
Mybe I just need to learn more bout the tools that drive the RW. :(
csj wrote:
On Thursday 22 November 2001 16:11, Hanasaki JiJi wrote:
Is there a way to get my teac to burn? it is a 54E CDRW but shows the
following:
Cdrecord 1.1
Is there a way to get my teac to burn? it is a 54E CDRW but shows the
following:
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'TEAC' 'CD-W54E ' '1.0A' Removable CD-ROM
0,1,0 1) *
I am looking at a MS-6368 Mother board that says it has a RT8100. How
can I check for support for this board? Or, 8100 a general number means
an 81xx is is used (i.e.: maybe a 8129 or 8139)
Thank you.
Didn't the manufacturer go bankrupt and get bough by nvidia?
nate wrote:
Hanasaki JiJi said:
Nate, any tips on getting the multimedia stuff to work on a 3500TV?
nope. sorry. i looked into possibly doing that too but
the driver development looked too alpha for me to even try.
i got a
Nate, any tips on getting the multimedia stuff to work on a 3500TV?
nate wrote:
David Teague said:
Hi
Would some kind soul please tell me which video card to put in my
new machine (which is still in the planning) that will Debian Woody
and Gnome X out of the box?
for stability - matrox g4
I took out esd and now there are no sounds in gnome. My wm is sawfish.
Is there a way to get sound in gnome on woody without esd?
Also, I have aol's AIM but that seems to rely on esd too :(
The following error is showing up in syslog. I
Nov 12 15:11:46 fred rpc.statd[196]: Received erroneous SM_UNMON request
from fred for 192.168.1.1
SErver lsmod - potato
nfsd 160536 0 (unused)
nfs43820 0 (unused)
lockd 41720 0 [nfsd
I have the following in my interfaces file of a firewall. eth0 is the
external NIC and eth1 is the internal NIC. I am getting DHCP addys from
my provider.
The following list of commands hangs:
* ifup eth0
* ifup eth1
* ifdown eth1 eth0
* ifup eth1
The following works ok:
* i
1 - 100 of 133 matches
Mail list logo
