You might want to read the manual with the computer. My Lenovo would boot
automatically to Windows. In the manual, it had a hold on the side, trusty
paperwork clip press the hole, boots into bios. Install Linux
On Thu, Jun 8, 2023, 2:51 PM Bret Busby wrote:
> On 9/6/23 05:18, Bret Busby wrote:
Try this article
https://en.opensuse.org/SDB:BTRFS
On Thu, Jan 12, 2023, 5:43 AM Nate Bargmann wrote:
> I have a Freedom Box Pioneer (hardware is an Olimex A20-OLinuXino-LIME2
> unit with a Samsung 128 GB micro-SD card. The micro-SD is partitioned
> into 2GB boot ext2 and the remainder as the
That's interesting in itself. Makes some sense.
Thanks much.
On 1/28/22, Andrei POPESCU wrote:
> On Mi, 26 ian 22, 17:33:04, Joseph Brenner wrote:
>> I was wondering if the on-disk data format for btrfs is
>> compatible between the i386 and amd64 code bases--
>> e.g. would yo
I was wondering if the on-disk data format for btrfs is
compatible between the i386 and amd64 code bases--
e.g. would you expect to be able to swap data drives
between machines running either?
I've got an old i386 installation with /home in it's
own partition, and I'm wondering if I can expect to
Good day, I have a Lenovo Miix 720 and I would like to I need a physical
keyboard to install ubuntu on it and what kind touchscreen support there is?
x and also
ServerAliveInterval and ServerAliveCountMax, but it doesn't seem to
make any difference. Is there some other setting somewhere that
affects this?
Thanks,
Britton
--
Joseph Loo
j...@acm.org
jet "Boot path sur HP".
> Ceci dit, du moment que votre problème est résolu, c'est l'essentiel.
> Cordialement
--
Joseph Fausto
djomentu...@gmail.com
+33603021530
I've been going around on some fun issues related to doing a full
upgrade for the first time in a long time on a Lenovo E550 laptop
running Debian testing.
The system now won't boot cleanly, but I can get in via a
recovery mode (after which, I start network-manager manually), so
I've continued
ocuments from another location. But the user logging into the
machine would only see it as a single location without any links.
--
Joseph Loo
j...@acm.org
ocuments from another location. But the user logging into the
machine would only see it as a single location without any links.
--
Joseph Loo
j...@acm.org
gB and memory stick is old technology.
In addition be careful of the switch. In sdc cards, the switch does not
truly make the card read only, instead it is a bit to indicate the
switch is on or off. It is up to the software to ensure that you do not
write to it. Of course this may have changed
--
Joseph Loo
j...@acm.org
Hie brother Amazon
On Tuesday, November 14, 2017, Amazon Recognition
wrote:
>
>
> http://emancipator.strongfever.net/cl/r-
> S62OS1CC74JNS15J3MS1CJ2HSDCJS0S0S0S15S2SBSCCS21FS1JGSA">
> welcome to amazon
> http://emancipator.strongfever.net/85517916.png; border0 />
>
showthread.php?147959-How-to-install-and-boot-145-operating-systems-in-a-PC
> (Scroll down to "Partition Tables".)
>
> Cheers,
> David.
>
Your URL is talking about gpt scheme. The limitation is in the MSDOS
partition scheme
--
Joseph Loo
j...@acm.org
your system?
If you did all the above, you can just print the ps file to the printer.
--
Joseph Loo
j...@acm.org
. So is this a
> bug in e2fsprogs ?
>
>
> --
> Ritesh Raj Sarraf
> RESEARCHUT -- http://www.researchut.com
> "Necessity is the mother of invention"
>
>
fsck checks primarily a directory structure not the hard drives. you
might want to try
badblocks -svn /dev/sdb
Like always, backup your drive before you do this.
--
Joseph Loo
j...@acm.org
(USB
enclosure) or you will have to mount it on the system.
First thing I would do is to just load it on the system and use gparted
to look at it only (this can destroy your disk).
Alternate method, is get something like parted magic (live rescue disk)
and boot from it. There you can try mounting the drive. In some cases
you may need to do a fsck to check the system (make backup before doing it).
--
Joseph Loo
j...@acm.org
On 10/13/2015 10:34 AM, rlhar...@oplink.net wrote:
> On Tue, October 13, 2015 7:26 am, Joseph Loo wrote:
>> have you tried installing
>> ghostscript on your windows machine? It will convert ps and possibly pdf to
>> pcl or some other printers they have drivers for.
&g
traditionally been easier to make use of from
> Windows than from Linux.
>
> https://en.wikipedia.org/wiki/Portable_Document_Format
>
> Lisi
>
I am a little late in the discussion, but have you tried installing
ghostscript on your windows machine? It will convert ps and possibly
performance requirements to permit higher speed network operation
In real life depending on the length your throughput for 5 will be far
less than 5e.
- --
Joseph Loo
j...@acm.org
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
iQIcBAEBAgAGBQJU5WROAAoJEEMx95CapKFE8m0P/0LJYyO4QRBtofwJj8iqzSQL
deploying. It tends to remove the bad blocks.
You can also try grc's Spinrite (cost money) at grc.com
--
Joseph Loo
j...@acm.org
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: https
of getting the XP-820 to print to CD/DVD from Linux.
I used Turboprint from turboprint.info. It is a paid program and it
allows me to print to CD/DVD. Unfortunately they have not come out a
driver for the epson xp820. I have a Epson XP810
--
Joseph Loo
j...@acm.org
--
To UNSUBSCRIBE, email
start
period. One clue, is power on the keyboard at the start, i.e. flash of
the keyboard lights (sometimes).
--
Joseph Loo
j...@acm.org
.
--
Joseph Loo
j...@acm.org
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/53b5024f.8090...@acm.org
per cell. If you
exceed the limit, dead cell. Remember that another factor involve is the
number of spare cells. all of these things play in the role when an ssd
fails.
--
Joseph Loo
j...@acm.org
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe
habituelle: https://bugs.debian.org/729113
Cordialement,
Joseph
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis
udisks svp?
Merci d'avance,
Joseph
2014/1/16 andre_deb...@numericable.fr
On Thursday 16 January 2014 12:50:10 luc schimpf wrote:
Le 16/01/2014 12:20, Klaus Becker a écrit :
Le jeudi 16 janvier 2014, 12:17:35 MERLIN Philippe a écrit :
Bonjour,
Je suis en Sid AMD64 et Kde système à jour
Hello all,
I have installed KDE on my 7.1.0 box. However when I log in under KDE, all GTK
apps such as synaptic
or firefox are unthemed (then have the old windows 9x style). How can I fix
that?
Josh
Bonjour,
Le tuto sur le BSP/Beginers est plutôt pas mal selon moi.
Je l'utilise régulièrement:
https://wiki.debian.org/BSP/BeginnersHOWTO
Joseph
2013/11/9 laurent Trinques scor...@qelectrotech.org:
Le vendredi 8 novembre 2013, 10:20:01 Guy Roussin a écrit :
Bonjour,
Bosses plutôt en tant
problème là).
Cordialement,
Joseph
2013/11/8 major_ghz major_...@electronique-libre.org:
Le Thu, 7 Nov 2013 12:31:55 +0100,
major_ghz major_...@electronique-libre.org a écrit :
bonjour,
j'ai un dual screen sous wheezy (debian 7)
dans l'espace des bureau virtuel je n'ai pas les miniature du
Bonjour,
Avez-vous bien décoché la case pour dupliquer les écrans? Si je me
souviens bien, on ne voit qu'un écran tant que celle-ci est cochée.
Joseph
2013/11/7 major_ghz major_...@electronique-libre.org:
bonjour,
j'ai un dual screen sous wheezy (debian 7)
dans l'espace des bureau virtuel
d'avance,
Joseph
2013/11/7 major_ghz major_...@electronique-libre.org:
Le Thu, 7 Nov 2013 16:46:22 +0100,
Joseph Herlant herla...@gmail.com a écrit :
Qu'avez-vous utilisé pour configurer votre extension d'écran?
Quand vous prenez l'écran avec votre souris et que vous essayez de le
déplacer
p style=margin-bottom:0infont color=#00font face=Liberation
Serif, seriffont size=3b/b
Team,/font/font/font/p
p style=margin-bottom:0infont color=#00font face=Liberation
Serif, seriffont size=31.
Your website b/b
is not ranking top in Google organic searches for many competitive
this as a bug
against the FAQ or the fact that the package is missing.
If I have a program to which I do not have the source (commercial EDA
tool) and it requires libtermcap.so.2, how do I satisfy this program the
Debian Way?
--
--Joseph Lenox, BS, MS
I'm an engineer. I solve problems
On 06/28/2013 11:04 AM, Sven Joachim wrote:
On 2013-06-28 17:39 +0200, Joseph Lenox wrote:
Noticed that termcap-compat is referenced in one of the FAQ
questions on the website
(http://www.debian.org/doc/manuals/debian-faq/debian-faq.en.txt,
4.7). The package does not exist on Wheezy, nor
On 06/28/2013 03:01 PM, Sven Joachim wrote:
On 2013-06-28 21:24 +0200, Joseph Lenox wrote:
On 06/28/2013 11:04 AM, Sven Joachim wrote:
On 2013-06-28 17:39 +0200, Joseph Lenox wrote:
Noticed that termcap-compat is referenced in one of the FAQ
questions on the website
(http://www.debian.org
Cuanto creiste que era justo?
Digo solo para tenerlo en mente, tambien me gustaria aportar!
---
TSU. Joseph Meza Ramirez
Redes y Telecomunicaciones
-Original Message-
From: Eduardo Rios eduri...@yahoo.es
Date: Mon, 15 Apr 2013 20:28:23
To: debian-user-spanish@lists.debian.org
Subject
Excelente 40 es una buena cantidad me parece, donde se hace la donacion? Por
paypal? Tienes algun dato? Gracias de antemano!
--Mensaje original--
De: Eduardo Rios
Para: Joseph Ramirez
CC: debian-user-spanish@lists.debian.org
Asunto: Re: [SOLUCIONADO]Re: Duda a la hora de hacer una
este teléfono, te ofrezco una disculpa. :D
---
TSU. Joseph Meza Ramirez
Redes y Telecomunicaciones
-Original Message-
From: Camaleón noela...@gmail.com
Date: Tue, 26 Mar 2013 14:26:00
To: debian-user-spanish@lists.debian.org
Reply-To: A MI NO, ENVIA A LA LISTA
noelamac
Jajajajajaajajajajaja amo el sarcasmo de esta mujer.
Camaleón eres una estrella, muchos te odian, muchos te adoran, pero todos somos
tus fanáticos aunque habrá personas que dirán NO!
Saludos, buen dia a todos!
---
TSU. Joseph Meza Ramirez
Redes y Telecomunicaciones
-Original Message
Camaleon welcome back!
---
TSU. Joseph Meza Ramirez
Redes y Telecomunicaciones
-Original Message-
From: Juan Pablo Jaramillo Pineda juanpablo...@gmail.com
Date: Sat, 3 Nov 2012 16:58:48
To: A MI NO, ENVIA A LA LISTAnoelamac+a_mi_no_envia_a_la_li...@gmail.com
Cc: debian-user-spanish
and the net
mask for each item. ifconfig will tell you what each machine has.
--
Joseph Loo
j...@acm.org
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1334138712.2603.14.camel@HP
added xfwm4 to the list of programs to start and
been too busy getting other work done to look at it.
--Joseph Lenox
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
On 12/30/2011 01:47 AM, Florian Kulzer wrote:
On Thu, Dec 29, 2011 at 19:55:23 -0800, Joseph Loo wrote:
I have just installed Debian Squeeze. I have replaced the open office
package with Libre Office 3.4.3. I am trying to use the URW Bookman L
font. I have the bold, italic, and the bold italic
I have just installed Debian Squeeze. I have replaced the open office
package with Libre Office 3.4.3. I am trying to use the URW Bookman L
font. I have the bold, italic, and the bold italic. The non-bold
non-italic are both missing.
I have TeXLive: Recommended fonts installed
--
Joseph Loo
j
On 11/08/2011 09:10 AM, Joseph Lenox wrote:
I'm not quite sure how, but I managed to get XFWM4 (current sid
version 4.8) to not start with my session (or not to be saved). I
don't recall doing anything particular to the window manager settings
or desktop session settings. All I know is that I
session, the window manager was not loaded.
I started xfwm4 by hand, saved the session, and did a logout/login cycle
and it seemed to have stuck.
Anyone else seen this issue? Any ideas where a log file may reside to shed
some light on what's going on?
--Joseph Lenox
--
Nothing unreal exists
packages.debian.org, download them yourself, and use dpkg -i to
install (or grab the source files if you can use those).
b43-fwcutter (debian stable):
http://packages.debian.org/search?keywords=fwcuttersearchon=namessuite=stablesection=all
--Joseph Lenox
--
To UNSUBSCRIBE, email to debian
http://address of sharing
machine:631/printers/print_queue_name as the printer destination.
--Joseph Lenox
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4e7bb25c
On 09/19/2011 09:24 PM, Bob Proulx wrote:
Just recently a new sudo entered Wheezy Testing and it changed the
behavior of secure_path. See Bug#639841 for details. It no longer
overrides your path with a standard system PATH by default. So now
unless you set it in your /etc/suders file it will
On Tue, Sep 20, 2011 at 1:16 AM, Jochen Spieker m...@well-adjusted.de wrote:
Joseph Lenox:
After updating Sid last week, I tried to install something with
apt-get using sudo and got the following error from dpkg:
dpkg: warning: 'ldconfig' not found in PATH or not executable.
dpkg
package manager works fine, as does changing to root with su -.
Any offhand ideas as to where to look first to figure out what's going on?
--Joseph Lenox
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
On 09/19/2011 08:40 PM, Joseph Lenox wrote:
Any offhand ideas as to where to look first to figure out what's going
on?
--Joseph Lenox
My apologies if I've double or triple posted; I managed to screw up the
destination once and then sent from an unsubscribed email address
package manager works fine, as does changing to root with su -.
Any offhand ideas as to where to look first to figure out what's going on?
--Joseph Lenox
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Solaris 8 x86's bootloader config and get it to boot Linux,
good luck.
--Joseph Lenox
I think people are assuming identical hardware, and if that's not the
case, you need to be careful about just doing an rsync between the
boxes. Even getting a list of debs from one machine and trying to
bulk install them on the other can bet tricky... as I remember it
there are some packages that
now, and can't determine what's
going on exactly. According to what I've read, nobody is being set
because some nfs daemon can't match user ids between the two systems.
All of the systems are authenticating on the SAME NIS system.
--Joseph Lenox
/etc/resolv.conf for all systems
domain
On 01/08/2011 08:25 PM, Tom H wrote:
On Sat, Jan 8, 2011 at 7:10 PM, Joseph Lenoxlordofhyph...@gmail.com wrote:
I'm running a series of Debian 6.0 Squeeze clients on my network (in the
process of upgrading from lenny) that mount NFS from a Solaris 10 (x86) box
through autofs (5.0.4-3.2 amd64
On 01/08/2011 08:25 PM, Tom H wrote:
On Sat, Jan 8, 2011 at 7:10 PM, Joseph Lenoxlordofhyph...@gmail.com wrote:
I'm running a series of Debian 6.0 Squeeze clients on my network (in the
process of upgrading from lenny) that mount NFS from a Solaris 10 (x86) box
through autofs (5.0.4-3.2 amd64
Yes, it is quite possible, use the same format and replace the desired key. for
instance, i had a machine that rebooted on ctrl+alt+del (shutdown -r now) and
shutdown on ctrl+alt+h (shutdown -h now) iirc, on that machine i had to switch
to a tty first but might be a setting error on my part
for stuff like disc #, etc), but I'd hate to
waste this.
It assumes that neroAacEnc and neroAacTag are in the path (because I
keep my copies in /usr/local/bin).
--Joseph Lenox
#!/bin/bash
# Shell script to interface with neroAacEnc and neroAacTag for tagging
of AAC files
+0200, Camaleón wrote
On Wed, 27 Oct 2010 14:47:44 -0500, Joseph Lenox wrote:
The version of Nouveau (FOSS nvidia driver) that ships with 6.0
(Squeeze) on last week's (2010-10-17) testing disc does not play nice
with the Quadro NVS240 graphics card. No output on screen at all even
for a console
with the disc recovery option, and remove the driver from its
modprobe list in /etc just to get to a text console.
--Joseph Lenox
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
with the disc recovery option, and remove the driver from its
modprobe list in /etc just to get to a text console.
--Joseph Lenox
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
It's called a makefile.
http://www.cs.utah.edu/dept/old/texinfo/make/make_toc.html
On 9/29/2010 12:46 PM, abdelkader belahcene wrote:
hi,
by default I have to add option -lm to the command gcc -lm file.c
when I use math functions. Where can I configure gcc to add it to the
default gcc,
Computer suddenly dropped into initramfm after power loss, help getting back
into file system would be helpful, and appreciated, stuck doing email from my
phone
thanks in advance, hopefully the basic steps will b all i need
--
Sent from ATT's Wireless network using Mobile Email
--
To
to stave off the OOM killer.
You can find P3 boxes really, really cheap (basically what it costs to
ship) these days; and the RAM for those isn't an arm+leg yet. Depending
on the board, you may still find ISA slots (if that's something you must
have).
--Joseph Lenox
--
To UNSUBSCRIBE, email
On 3/25/2010 6:18 PM, Michael Biebl wrote:
Am 25.03.2010 23:38, schrieb Joseph Lenox:
I tried the pam_group approach, and id says the user is in the plugdev
group, but I'm still getting a permissions error from DBus. Adding the exact
user to the plugdev group on the local machine worked
I'm running lenny (5.0.4); and trying to get USB flash drive mounting in a
way that doesn't involve hand-adding every user to the plugdev group (we're
running NIS).
I tried the pam_group approach, and id says the user is in the plugdev
group, but I'm still getting a permissions error from DBus.
Hello, been a while since I posted, working on setting up a partition which
will run mainly console programs, however, I was interested in setting up X to
run a few programs (or maybe the framebuffer) a quick search of the web yielded
no help. Any suggestions on where to look.
Running lenny
! :)
Do you have an estimate of when it will appear in sid?
--
Thanks:
Joseph Rawson
signature.asc
Description: This is a digitally signed message part.
system using multiple buildd's with cowpoke as an
example. I've had mixed results with some packages honoring those options
and other packages ignoring them. It's been a very interesting experiment.
--
Thanks:
Joseph Rawson
signature.asc
Description: This is a digitally signed message part.
installed for this, such as po4a).
popd
dupload $src-$newver_source.changes
cowbuilder $src-$newver.dsc (use -B for DEBBUILDOPTS in pbuilderrc)
Thanks for all the help, and I hope people find this useful.
Kumar
--
Thanks:
Joseph Rawson
signature.asc
Description: This is a digitally signed
On Wednesday 22 July 2009 09:18:11 Kumar Appaiah wrote:
On Wed, Jul 22, 2009 at 08:56:25AM -0500, Joseph Rawson wrote:
Using reprepro makes it easy to upload the new packages to an
experimental dist for testing, then call reprepro -b /path/to/repos
copysrc experimental lenny-backports
On Wednesday 22 July 2009 09:18:11 Kumar Appaiah wrote:
On Wed, Jul 22, 2009 at 08:56:25AM -0500, Joseph Rawson wrote:
Using reprepro makes it easy to upload the new packages to an
experimental dist for testing, then call reprepro -b /path/to/repos
copysrc experimental lenny-backports
à ceux attendus
?
Par avance, merci pour votre aide.
--
Nicolas Joseph
Responsable des rubriques C et GTK+ de developpez.com /
In charge of the C and GTK+ sections on developpez.com
http://nicolasj.developpez.com
)
add tracked files to svn
This would keep the amount of files that were being tracked down to a minimum.
Anyway, if you are interested in it, look it over, maybe try it out and let me
know. It may be outdated, but bringing it back up to date shouldn't be too
difficult.
--
Thanks:
Joseph
/SVKAntiFUD
// Oliver
--
Thanks:
Joseph Rawson
signature.asc
Description: This is a digitally signed message part.
):
pg_createcluster 8.3 main --start
I checked all the postgre .deb files in my /var/apt/cache/archives
directory. None of the postgre .deb files have this
/etc/postgresql/8.3 directory. has something gone wrong with the deb
packages in testing?
--
Thanks:
Joseph Rawson
signature.asc
another terminal
and use sudo in that terminal, you will have to authenticate again.
--
Thanks:
Joseph Rawson
signature.asc
Description: This is a digitally signed message part.
Bonjour à tous,
Je viens d'installer la Lenny sur une machine qui n'est pas toute
jeune. Tout va bien à part un unique léger problème agaçant: le X est
anormalement lent à charger au lancement de gdm.
A lire le log c'est AIGLX qui pose problème, mais je n'arrive pas à
désactiver le driver 3 D,
Hi All
My host managed to kill my virtual server while migrating it from one machine
to another. They were able to give me the up to date contents of /var /etc
and /home and a new server with a fresh etch install on it.Will it work
if I just copy over the contents of /var/lib/mySQL?
I've
--- On Thu, 8/14/08, Ken Heard [EMAIL PROTECTED] wrote:
snip
Because of this lack of success, I am unable to upgrade or
install any
packages in this laptop. Is there a way to get out of this
catch-22
situation, and consequently upgrade tzdata successfully,
and upgrade and
install
sadeq zabihi wrote:
I am tring to install a wiki software on Debian (server) on my network.
But I dont know which wiki software is better for my project (it is not a
big project) and how i can install it on debian server. It it is possible
for you please help me about both (wiki software and
--- On Fri, 8/1/08, myblog1980 [EMAIL PROTECTED] wrote:
snip I'm an Ubuntu user who is having an ongoing problem
with USB file
transfers. This issue also seems to be affecting a
significant number
of other Ubuntu users, and I have also been reading reports
of it
appearing in other
also thought check out
https://bugzilla.novell.com/show_bug.cgi?id=105871
seems to be in the sync flag on the new kernels (if i am reading it correctly)
and also suggests fixes, it may help
jwlockhart
Registered Linux User #458799
Registered Kubuntu User #19678
this user is penguin powered
just wondering which P2P clients are best, seems to be slim pickings in the
base debian repository so I figure that I am missing a repository or will have
to go the long way to find a good client (however, I do not want to have to
find and install a lot of dependencies that are also not in the
-002 kdm: :0[4670]: pam_unix(kdm:auth):
authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost= user
=joe
Jul 6 07:55:51 dsl017-124-002 kdm: :0[4670]: pam_unix(kdm:auth):
authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost= user
=joseph
Jul 6 07:56:22 dsl017-124-002
Neil Gunton wrote:
to see what driver version supports your card. The names have changed
since Etch. For example, the 1.0-8776 driver was the one which supported
the MX400 graphics card, but it is now the 96.43.xx driver which
supports it - but is not yet in testing.
Thanks - but this is
From: Gordon Huff [EMAIL PROTECTED]
Subject: Re: need install 'how to' help
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Date: Sunday, June 8, 2008, 11:40 AM
need 'howto' help, newbie to linux, want to install debian to hd on
laptop, specs follow
You need a local user group. Google for Linux User
If you are using Debian on your phone, embedded computer, laptop,
desktop, server, network, telecommunications equipment or other part of
your information infrastructure, I'd love to hear from you.
What are you using Debian for?
I'm presently running sid on two desktops and etch on a small
Mumia W.. [EMAIL PROTECTED] wrote: On 05/14/2008 08:57 AM, Javier Barroso
wrote:
Hi list,
Hi Javier.
Since one week ago I'm noticing firefox is sometimes [unresponsive] during
three or four seconds.
First I experiment it with swiftfox, then I used Firefox (iceweasel) 2 and
the
well i have been working on getting an old compaq
armada 7770dmt up and running with debian etch 4.0r2.
everything works good, only i cannot get alsa to find
the sound card at boot, sound card is a ess-1878.
added the sound module to /boot/modules but that
didn't seem to help, checked alsa
my mistake forwarding to list
--- joseph lockhart [EMAIL PROTECTED]
wrote:
--- Anthony Towns [EMAIL PROTECTED] wrote:
On Mon, Mar 17, 2008 at 01:39:40PM +, Steve
McIntyre wrote:
[ /me sets the Reply-To: to debian-cd again... ]
But not Mail-Followup-To:...
At a bare
take it as you will, but I think that it would be
useful to group the terminal and lightweight apps
together, just seems a waste to download (25 for etch)
disks to install onto a low powered computer, when
everything together would all fit on one disk (that is
base system and all terminal apps
Luis Maceira [EMAIL PROTECTED] wrote: How can I see all the messages
generated by
a bash command (configure make make install,
for example) to standard output(computer screen),
and at the same time make sure that all is
written to a text file for later analysis.
It is a redirection but I don´t
Well, the BIOS recognises the drive, udev isn't
giving you nodes. Is
the kernel seeing it? Check dmesg.
no mention of the drive in dmesg
What do you have under /dev? When you say the
device node, do you mean
/dev/sd? or do you mean /dev/dvd or /dev/cdrom?
What about
that knocked out our power and after recovering
from
UPS is your friend...
UPS? - big brown trucks?
that my DVD burner seemed to go AWOL (that is the
device nodes just vanished)
checked syslog and no errors there, nothing on
udev
documentation seemed to help, and STFW didn't
well, about a week ago we had a lovely thunderstorm
that knocked out our power and after recovering from
that my DVD burner seemed to go AWOL (that is the
device nodes just vanished)
checked syslog and no errors there, nothing on udev
documentation seemed to help, and STFW didn't help
either. i'd
.
Thanks.
Joseph A. Price, Ph.D.
Professor of Pathology
Dept. Pathology, OSU-COM
OSU Center for Health Sciences
W. 17th. St.
Tulsa, OK 74107-1898
Ph: 918-599-1603 FAX: 918-599-1098
[EMAIL PROTECTED]
1 - 100 of 1179 matches
Mail list logo