to the 75dpi fonts first.
--
Philip Lehman [EMAIL PROTECTED]
)
There might be even more, just look around.
--
Philip Lehman [EMAIL PROTECTED]
additional fonts,
well, I do. Didn't mean to sound rude, either. ;)
--
Philip Lehman [EMAIL PROTECTED]
/port/protocol which
process might trigger the dialout. See the ipchains HOWTO.
Tracking this down is a science. Good luck!
--
Philip Lehman [EMAIL PROTECTED]
On Thu, 25 May 2000, Philip Lehman [EMAIL PROTECTED] wrote:
On Thu, 25 May 2000, Ron Rademaker [EMAIL PROTECTED] wrote:
See subject.
I'm using a ISDN connection.
...with isdn in autodial mode I guess. Try setting up ipchains and log
all output over ippp0.
/sbin/ipchains -A input -j ACCEPT -i
is certainly more convenient), it might
be helpfull as a means of orientation, especially if you're still
exploring the load of packages which are available.
--
Philip Lehman [EMAIL PROTECTED]
package) and grep the name from the afm:
ttf2afm font.ttf | grep ^FontName
--
Philip Lehman [EMAIL PROTECTED]
and after reading the HOWTOs and
the ipchains docs I think I understand how it works, but I still feel
a bit insecure. Any pointers to more documentation are welcome too.
--
Philip Lehman [EMAIL PROTECTED]
On Mon, 22 May 2000, Justin Megawarne [EMAIL PROTECTED] wrote:
And Philip Lehman bestowed upon us all:
On Mon, 22 May 2000, Antonio Rodriguez [EMAIL PROTECTED] wrote:
prw-r--r--1 root root0 May 22 23:01 /dev/gpmdata
If you don't have any gpmdata fifo, create one
On Tue, 23 May 2000, Armin Wegner [EMAIL PROTECTED] wrote:
Use vim. It's hard to learn, but it is worse it.
Interesting typo ;)
(I'm writing this as a non-native speaker, no offence intended)
--
Philip Lehman [EMAIL PROTECTED]
myself and it works right out of the
box on potato. Merely a matter of half an hour (not flaming or
anything, I'm just curious).
--
Philip Lehman [EMAIL PROTECTED]
be unusual.
3. Configure X properly (set timeouts and define power_saver) and
run 'xset dpms' from .xinit.
--
Philip Lehman [EMAIL PROTECTED]
for your modell.
I hope I didn't omit anything essential. Helps?
--
Philip Lehman [EMAIL PROTECTED]
On Mon, 22 May 2000, Lindsay Haisley [EMAIL PROTECTED] wrote:
The problem turned out to be in
/etc/printcap. The default printer pulled up in the share is 'lp', which is
basically a config for an old-fashioned dot matrix printer. It has no 'sf'
entry. Make sure the printcap entry defining
On Mon, 22 May 2000, Frank Mehnert [EMAIL PROTECTED] wrote:
I'm using joe for many purposes. The only feature I miss is syntax
highlighting in C. Are there any hints for such a small and fast
editor in Debian with that feature built in?
jed?
--
Philip Lehman [EMAIL PROTECTED]
...
EndSection
In /etc/gpm.conf:
device=/dev/psaux
type=ps2
responsiveness=
append1=-R# -R for repeat/echo to /dev/gpmdata
If you don't start gpm from the stock /etc/init.d/gpm script, just
make sure you add -R to the command line.
--
Philip Lehman [EMAIL PROTECTED]
?
--
Philip Lehman [EMAIL PROTECTED]
-P -U nobody -N
--
Philip Lehman [EMAIL PROTECTED]
I've also noticed that make segfaults sometimes when I try a make
menuconfig.
--
Philip Lehman [EMAIL PROTECTED]
when I installed nfs-common, put the
server volumes in /etc/fstab and added the client to the server's
/etc/hosts.allow. But not on this particular client.
I will gladly provide more information if neccessary, it's just that I
don't know where to search. TIA
--
Philip Lehman [EMAIL PROTECTED]
problems
on the server side either with this particular client. All machines
(server and clients) are running potato.
I don't have the faintest idea what this error msg means. Any hints
appreciated.
--
Philip Lehman [EMAIL PROTECTED]
with dual-boot setups in general, but I'm a bit
clueless facing this particular setup. Any hints appreciated...
--
Philip Lehman [EMAIL PROTECTED]
times. In lilo.conf I have:
boot=/dev/hda
root=/dev/hdc1
...
image=/vmlinuz
...
other=/dev/hda1
...
--
Philip Lehman [EMAIL PROTECTED]
On Thu, 4 May 2000, matthschulz wrote:
On Thu, 04 May 2000, Philip Lehman wrote:
On Thu, 4 May 2000, Oswald Buddenhagen wrote:
I have a machine with two hard disks here, that other OS resides
on hda and I added the second drive (hdc) for Debian. The setup
installed a MBR on hdc, but my
On Tue, 25 Apr 2000, Harry ten Berge [EMAIL PROTECTED] wrote:
Chris Mason wrote:
Where can I get nptdate?
It's in 'xntp3'. ntpdate is a part of the complete 'time server suite'.
At least in potato it's broken up into server and client. There is a
ntpdate (client only) deb.
--
Philip Lehman
?
--
Philip Lehman [EMAIL PROTECTED]
don't
turn it off when the BIOS comes up, it keeps on looping.
I'm desperate because the same happens when I boot from a rescue
disk. What can I do about that? Any help will definetly be very
much appreciated...
--
Philip Lehman [EMAIL PROTECTED]
a mounted drive cannot be defragmented?
There is no need to 'defrag' ext2 filesystems, you don't have to worry
about that.
--
Philip Lehman [EMAIL PROTECTED]
as the configuration is concerned. The postinstall script asked
for the client IPs on the LAN and I entered that, but where is this
stored? Do I have to do anything in addition to that, or can I rely on
the defaults? I don't need anything fancy, but the setup should be
halfway secure.
TIA
--
Philip Lehman
the font server instead. But the font server might
need this file. xfs and xfsft do, xfstt doesn't, I don't know about
xfs-xtt. There should be some instructions that tell you what files
you need.
--
Philip Lehman [EMAIL PROTECTED]
setting used by the font server is
sane, order does matter if you have different versions of one
font. Put the dirs with the best fonts first.
--
Philip Lehman [EMAIL PROTECTED]
, there is an option in /etc/X11/config;
something like run-xdm. Change that to no-run-xdm or put a '#' on
front of it.
--
Philip Lehman [EMAIL PROTECTED]
help appreciated...
--
Philip Lehman [EMAIL PROTECTED]
;) Only bug fixes will be included.
--
Philip Lehman [EMAIL PROTECTED]
trying to reserve 39.2 megs for the root
system? Keep in mind that this partition will contain everything below
/ except /usr, so this setup would be unusable.
--
Philip Lehman [EMAIL PROTECTED]
--
Philip Lehman [EMAIL PROTECTED]
have it or know anyone who has it? I'd love
to get a copy.
Hint: XMMS supports winamp 1.x and 2.x skins. There are serveral
hundred skins available for download at www.winamp.com, I'm sure
you'll find something that makes you upgrade ;)
--
Philip Lehman [EMAIL PROTECTED]
on the server.
Is there an automount solution out there that would facilitate this?
What I have in mind is automatic unmounting of the drive when there is
no nfs connect and mounting it as soon someone requests it over
nfs. Any recommendations?
--
Philip Lehman [EMAIL PROTECTED]
On 21 Jan 2000, Roland Mas wrote:
Philip Lehman [EMAIL PROTECTED] writes:
Is there an automount solution out there that would facilitate this?
What I have in mind is automatic unmounting of the drive when there is
no nfs connect and mounting it as soon someone requests it over
nfs. Any
On Fri, 21 Jan 2000, Emmanuel wrote:
hello
I'm trying to add a gateway on a debian but there's no man on the computer.
man route, the option is called -gw. The NET-3-HOWTO decribes the
whole procedure in more detail.
HTH
--
Philip Lehman [EMAIL PROTECTED]
I recently upgraded my laptop to Linux 2.2.14 (from 2.0.36) with the
latest pcmcia-* and modutils, too. I compiled both the kernel and the
pcmcia-source myself. I don't know if the kernel upgrade is
significant or the upgrade of pcmcia-*.
I don't think it's the kernel. I used to run 2.2.9
-4 and
setserial is still installed.
--
Philip Lehman [EMAIL PROTECTED]
.
--
Philip Lehman [EMAIL PROTECTED]
cron jobs are
not quite the way to go, but I'm sure there's a better way than
putting sudo -u username myscript in the system-wide anacrontab?
--
Philip Lehman [EMAIL PROTECTED]
that's too trivial, but anyway: did you update the ls-R
databases? If it still doesn't work, take a look at
/etc/texmf/texmf.cnf and check if $TEXMFMAIN and $TEXMF are set
correctly. $TEXMF should be something like TEXMF =
{!!$TEXMFMAIN,!!$TEXMFLOCAL;!!$HOMETEXMF}.
--
Philip Lehman [EMAIL PROTECTED]
idea nonsense
or is this possible (in theory at least)? And in practice? Please
help me out here...
TIA
--
Philip Lehman [EMAIL PROTECTED]
required by Pine. This will patch the source, compile, and build
binary debs ready to install with dpkg/dselect. HTH
--
Philip Lehman [EMAIL PROTECTED]
Thanks a lot for all the input, this really helps me out.
--
Philip Lehman [EMAIL PROTECTED]
bar (I
have a very specific understanding of the word customization ;).
Oh, and if there is any documentation on (X)Emacs which is not
systematic but rather task oriented, I'd be interested in some
pointers.
TIA
--
Philip Lehman [EMAIL PROTECTED]
:$LD_LIBRARY_PATH
export LIBRARY_PATH=$LD_LIBRARY_PATH
$WPDIR/wpbin/xwp.bin $@
HTH
--
Space for hire. Contact Philip Lehman [EMAIL PROTECTED]
for hire. Contact Philip Lehman [EMAIL PROTECTED]
://ftp.varesearch.com/pub/mirrors/kde/stable/1.1.2/distribution/deb/potato/i386/
There's a list of all mirrors at http://www.kde.org/mirrors.html
HTH
--
Space for hire. Contact Philip Lehman [EMAIL PROTECTED]
`dpkg -l' lists all of them as fully
installed (I attach a `dpkg -l' log).
These errors might be caused by orphaned symlinks. Check if
/usr/lib/libcrypt.so actually points to an existing library. If not if
you don't have libcrypt installed, remove to link.
--
Space for hire. Contact Philip Lehman
fires up pppd and how) and a
corresponding X interface that displays some info and warning messages
(e.g. after a certain online time or depending on the accumulated
costs).
--
Space for hire. Contact Philip Lehman [EMAIL PROTECTED]
in particular, but I tried it out on
my Notebook, a P233 with 64 MB. SO is useable, but working is painful.
This is mostly a RAM issue, I think. It's bearable with 128 MB, but
still feels somewhat sluggish.
If you ever thought Netscape was a pig... ;)
--
Space for hire. Contact Philip Lehman [EMAIL
. In detail, that's:
libc5 5.4.46-3
xlib6 3.3.5-1
xpm4.7 3.4k-2
That's what was mentioned several times on this list and that's what
ldd suggests too. Am I missing something? Any ideas?
--
Space for hire. Contact Philip Lehman [EMAIL PROTECTED]
/ppp/ip.down'. If you don't want/need to run fetchmail as
root, the command in /etc/ppp/ip-* should be preceded by a `sudo`
command, e.g.
sudo my_local_username fetchmail -d 600
Let us know what you come up with.
--
Space for hire. Contact Philip Lehman [EMAIL PROTECTED]
On Thu, 21 Oct 1999, Philip Lehman wrote:
root, the command in /etc/ppp/ip-* should be preceded by a `sudo`
command, e.g.
sudo my_local_username fetchmail -d 600
It's `sudo -u my_local_username...`, forgot the '-u', sorry.
--
Space for hire. Contact Philip Lehman [EMAIL PROTECTED]
...
--
Philip Lehman [EMAIL PROTECTED]
, it will work with the SB drivers.
Dunno how to deactivate sound in Gnome, but if you'd like some noise
anyway, it might be worth a try to set up sound.
--
Philip Lehman [EMAIL PROTECTED]
. If not, put the 2.0 version of
glibc somewhere in /usr/local/lib, add this location to your
environment and to /etc/ld.so.conf, and run ldconfig. And make sure
your apps use the right linker.
--
Philip Lehman [EMAIL PROTECTED]
On Thu, 22 Jul 1999, Adam Shand wrote:
i was trying to find a pattern among the info people posted but couldn't
really see one. did anyone else figure this out?
- p2-266 128mb ram
- kernel 2.2.9
- glibc 2.1.1-13
It's the glibc from unstable.
--
Philip Lehman [EMAIL PROTECTED]
old xfs paths and append the
paths to your ttf fonts at the end of the list.
HTH.
--
Philip Lehman [EMAIL PROTECTED]
file.
It will write the connect speed to a (custom) log file.
--
Philip Lehman [EMAIL PROTECTED]
1148 416 pts/0S15:39 0:00 grep
apm*
to be sure I am recompiling my kernel.
Have you tried calling shutdown via /sbin/poweroff?
--
Philip Lehman [EMAIL PROTECTED]
I'm trying to build gv using neXtaw, but it segfaults. Linking to
neXtaw works fine with Xaw based apps for me, but I'm not sure about
replacing Xaw3d with neXtaw.
Is this at all possible or am I getting somthing wrong here?
--
Philip Lehman [EMAIL PROTECTED]
slink with some unstable stuff thrown in and glibc seems to be the
only relevant part in my case, but I may be overlooking something.
This is a *royal* PITA. If you find out more, please post it.
--
Philip Lehman [EMAIL PROTECTED]
. Shouldn't make a difference, though.
--
Philip Lehman [EMAIL PROTECTED]
68 matches
Mail list logo
