Felix Miata writes:
> Modesetting DIX driver
>
> (Device Independent X driver)
>
> as opposed to Device Dependent X drivers Amdgpu, Intel, Nouveau & Radeon.
OK. Well, the man page says it's a driver for KMS devices? A raw Nvidia
chip with no supporting kernel driver isn't going to present
Anssi Saari composed on 2021-07-30 11:42 (UTC+0300):
> Felix Miata wrote:
>> Have you tried both pure FOSS solutions? If xserver-xorg-video-nouveau is
>> installed, try purging it. The generic nature of the
didier gaumet writes:
> There is an Experimental Debian repository which contains the most up-
> to-date non-free Nvidia driver (470.57.02-1, similar to Nvidia
> website):
> https://packages.debian.org/experimental/nvidia-driver
Yes, thanks. Sure, experimental and unstable too already have new
Le vendredi 30 juillet 2021 à 11:42 +0300, Anssi Saari a écrit :
> Felix Miata writes:
[...]
> > [OTOH, why not Bullseye? It's on the verge of official release,
> > running on more
> > than 20 PCs here.
>
> Because it doesn't solve any problem since it has no newer Nvidia
> drivers. If it did
Felix Miata writes:
> Have you tried both pure FOSS solutions? If xserver-xorg-video-nouveau is
> installed, try purging it. The generic nature of the modesetting DIX could
> conceivably be enough to run that
Also you should get rid of the nouveau module (either blacklist it or just
delete it from the kernel tree).
I hope this helps a little bit.
Good luck and best regards!
Hans
> I managed to snag a new video card with Nvidia's RTX3070Ti. Due to the
> recent release of the 3070Ti, I have a
Anssi Saari composed on 2021-07-30 10:32 (UTC+0300):
> I managed to snag a new video card with Nvidia's RTX3070Ti. Due to the
> recent release of the 3070Ti, I have a bit of a problem with Debian 10
> as required drivers are quite new (460.84 or 465.31) and Buster has
> 460.73
I managed to snag a new video card with Nvidia's RTX3070Ti. Due to the
recent release of the 3070Ti, I have a bit of a problem with Debian 10
as required drivers are quite new (460.84 or 465.31) and Buster has
460.73 in backports. And now Bullseye is frozen so presumably there
won't
ho...@rumormillnews.com composed on 2019-08-04 17:29 (UTC-0400):
> Whatever's on the motherboard (presumably Kaveri) is still present,
> nothing done to tell it to sit idly by.
The place to start, after putting the GeForce back in, is to try doing
something.
There should be some BIOS setup
Thanks, Felix. P:)
>> My amd64 stable ('buster') system has this on the motherboard:
>
>> AMD Kaveri [Radeon R7 Graphics]
>
>> In the "Psychedelic colors" thread we added this to the kernal
>> commandline:
>
>> radeon.cik_support=0 amdgpu.cik_support=1
>
>> ...which, in the long run, may not have
ho...@rumormillnews.com composed on 2019-08-04 04:19 (UTC-0400):
> My amd64 stable ('buster') system has this on the motherboard:
> AMD Kaveri [Radeon R7 Graphics]
> In the "Psychedelic colors" thread we added this to the kernal commandline:
> radeon.cik_support=0 amdgpu.cik_support=1
>
Hi, Folks -
My amd64 stable ('buster') system has this on the motherboard:
AMD Kaveri [Radeon R7 Graphics]
In the "Psychedelic colors" thread we added this to the kernal commandline:
radeon.cik_support=0 amdgpu.cik_support=1
...which, in the long run, may not have been necessary, but it's
On Tuesday 24 February 2009 00:28:00 Ken Teague wrote:
David Baron wrote:
No, not a big gamer but newer kde needs opengl. I remember the wierd
artifacts in that old Mac64 with my own compiled dri stuff and my son's
complaining about that card. The nvidia was great in comparison
Artifacts
My rusty trusty mx400 legacy nvidia kicked. Had to get another cheap or free.
A dealer-friend gave me several to try out, two sockitomes, a voodoo and a
matrox-PCI.
I have learned a lot. The old mach64 has its dri stuff in the kernel package
now but that old 8-megger just never really hacked
David Baron wrote:
1. Which is better (I assume the matrox but am willing to learn otherwise) ?
Allegedly, Matrox cards has had great support under X for quite some
time. I guess the real answer to this will be dependent upon what type
of stuff you do on your PC. I'm going to go out on a
David Baron wrote:
1. Which is better (I assume the matrox but am willing to learn
otherwise) ?
Allegedly, Matrox cards has had great support under X for quite some
time. I guess the real answer to this will be dependent upon what type
of stuff you do on your PC. I'm going to go out on
David Baron wrote:
No, not a big gamer but newer kde needs opengl. I remember the wierd artifacts
in that old Mac64 with my own compiled dri stuff and my son's complaining
about that card. The nvidia was great in comparison
Artifacts are no good. Of the two cards you mentioned, I think you
Hi list
My system is debian testing (etch) AMD64x2
I have bought a new video card Nvidia 6200 TC 64 bit 256MB DDR2, which should
be better than my ATI Radeon X700se, according to several forums, for 3D
composite rendering.
Now after what I've read about this, on this list, it should
On Sun, 2007-03-04 at 23:38 +0100, Niels Rasmussen wrote:
Hi list
My system is debian testing (etch) AMD64x2
I have bought a new video card Nvidia 6200 TC 64 bit 256MB DDR2, which should
be better than my ATI Radeon X700se, according to several forums, for 3D
composite rendering.
Now
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaime Ochoa Malagón wrote:
Ok, I now understand why it's narrows it down...
Newegg doesn't ships to México. That's a problem...
Do you know another site having delivers to México?
That's what Google is for...
I'm afraid
Hi,
I really hate my PowerColor ATI chipset video card because is not
compatible with the driver of ATI, this card just Hang every time I
try to install it.
I want to buy a nvidia card, the problem is I don't know if nvidia is
only the chipset or nvidia make their own video cards?
I haven't a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaime Ochoa Malagón wrote:
Hi,
I really hate my PowerColor ATI chipset video card because is not
compatible with the driver of ATI, this card just Hang every time I
try to install it.
I want to buy a nvidia card, the problem is I don't know
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Jul 14, 2006 at 10:04:12AM -0500, Jaime Ochoa Malag?n wrote:
Hi,
I really hate my PowerColor ATI chipset video card because is not
compatible with the driver of ATI, this card just Hang every time I
try to install it.
I want to buy a
I want to buy a nvidia card, the problem is I don't know if nvidia is
only the chipset or nvidia make their own video cards?
u can buy nvidia graphic card and download the linux drivers from
www.nvidia.com. At this point, i will use 2d/3d acceleration hw with nvidia
module in Xorg or use nv
AGP
Around ~ 300 USD Less the better, I have an eye in nvidia 6800 but
isn't mandatory.
Thanks
On 7/14/06, Ron Johnson [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaime Ochoa Malagón wrote:
Hi,
I really hate my PowerColor ATI chipset video card because is not
On 7/14/06, Albert Dengg [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Jul 14, 2006 at 10:04:12AM -0500, Jaime Ochoa Malag?n wrote:
Hi,
I really hate my PowerColor ATI chipset video card because is not
compatible with the driver of ATI, this card just Hang
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
OK, that narrows it down.
Unlike ATI (which makes their own cards), NVIDIA only makes chips.
http://www.newegg.com/ProductSort/SubCategory.asp?SubCategory=48
This page lets you drill down, selecting all NVIDIA 6xxx AGP4/8 cards.
NewEgg sells 2
Ok, I now understand why it's narrows it down...
Newegg doesn't ships to México. That's a problem...
Do you know another site having delivers to México?
In the other hand I want to buy a card probed on Debian better if it
work too on amd64.
At least with the most higly hopes to work namely
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaime Ochoa Malagón wrote:
Ok, I now understand why it's narrows it down...
Newegg doesn't ships to México. That's a problem...
Do you know another site having delivers to México?
That's what Google is for...
In the other hand I want to buy a
On 7/14/06, Ron Johnson [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jaime Ochoa Malagón wrote:
Ok, I now understand why it's narrows it down...
Newegg doesn't ships to México. That's a problem...
Do you know another site having delivers to México?
That's what
On 13 Jun, Keith O'Connell wrote:
Hi,
I just replaced the Voodoo Banshee in a machine with a Hercules 3D Prophet
4000XT card. I thought the choice of card would be straight forward when I
re-ran xf86config, but it isn't. Can anyone else running this card tell me
which driver I should use
Hi,
I just replaced the Voodoo Banshee in a machine with a Hercules 3D Prophet
4000XT card. I thought the choice of card would be straight forward when I
re-ran xf86config, but it isn't. Can anyone else running this card tell me
which driver I should use for XFree86 4?
Keith
--
OK now this is _really_ off-topic: my ATI Xpert 98 makes X seem a bit darker
than my old mach32 card. It's also a different X server. It's not a big
deal really, but I'm curious if this is normal. -chris
...same here. (i just thought it was something funny about netscape, which is
where
i noticed it.)
i wonder what gives?
now getting ready to perch,
bentley taylor
(potato on 2.2.16)
//
Krzys Majewski wrote:
[snip]
my ATI Xpert 98 makes X seem a bit darker
than ...
[snip]
-chris
13:28:47~$ apt-cache search perch
13:28:56~$
-chris
now getting ready to perch,
bentley taylor
(potato on 2.2.16)
When you say that it's a 3.3.3.1 server, I assume this means it won't work
with 3.3.2, and I've heard that compiling xfree is a pain (though haven't
tried it). Is there an experimental version somewhere (I've looked in
/debian/project/experimental -- is there another repository of
I recently bought a new 2D/3D video card based on the 3DLabs chipset, and
the www.xfree86.org serverlist tells me to use the XF86_3DLabs server.
This isn't included in the debian distrobution. I'm not sure if that
server is only for 3.3.3 and I'm not quite sure how to find out.
My question is
On Sun, 7 Mar 1999, Gregory T. Norris wrote:
Thanks very much. I was actually kind of hoping for an RTFM answer too so
that I could find this stuff out in the future without posting
questions to the list that I could probably find out by reading some
manual. the XFree howto doesn't have specific
On Sun, Mar 07, 1999 at 12:46:16PM -0500, Daniel J. Brosemer wrote:
I recently bought a new 2D/3D video card based on the 3DLabs chipset, and
the www.xfree86.org serverlist tells me to use the XF86_3DLabs server.
This isn't included in the debian distrobution. I'm not sure if that
server is
On Sun, Mar 07, 1999 at 03:12:08PM -0500, Daniel J. Brosemer wrote:
On Sun, 7 Mar 1999, Gregory T. Norris wrote:
Thanks very much. I was actually kind of hoping for an RTFM answer too so
that I could find this stuff out in the future without posting
questions to the list that I could
-Original Message-
From: Abercromby James SSgt 31CS/SCBBD
Sent: Tuesday, February 23, 1999 6:44 AM
To: '[EMAIL PROTECTED]'
Subject:Off topic-New Video Card
Importance: High
I know this is off topic
But I don't' have access to newgroups anymore so I figured I would
On 23 Feb, Abercromby James SSgt 31CS/SCBBD wrote:
-Original Message-
From: Abercromby James SSgt 31CS/SCBBD
Sent: Tuesday, February 23, 1999 6:44 AM
To: '[EMAIL PROTECTED]'
Subject: Off topic-New Video Card
Importance: High
I know this is off topic
But I don't
Kenneth Scharf hat gesagt: // Kenneth Scharf wrote:
I just bought a new 19 monitor to replace my old 15. Now I can use
better than 1024x768 and be able to read it! But my 2m s3 card
probably has maxed out. I can get a pci s3v card with 4m for $40,
anyone have an idea which server will play
I just bought a new 19 monitor to replace my old 15. Now I can use
better than 1024x768 and be able to read it! But my 2m s3 card
probably has maxed out. I can get a pci s3v card with 4m for $40,
anyone have an idea which server will play, and what max res it will
give me? The monitor will
On Sat, Sep 19, 1998 at 03:05:16PM -0700, Kenneth Scharf wrote:
I just bought a new 19 monitor to replace my old 15. Now I can use
better than 1024x768 and be able to read it! But my 2m s3 card
probably has maxed out. I can get a pci s3v card with 4m for $40,
anyone have an idea which
45 matches
Mail list logo
