Christian Hattery wrote:
I used the netinst from the US mirror and I installed it on an AMD64
system and everything went fine and after the install when Debian ask's
for my account name and pass it leaves that GUI and goes to nothing but a
GRAY screen and a mouse cursor.
I don't know what
I don't know what to do from here and I'm confused as to what could be wrong
please any input would greatly be appreciated.
Something useful (in addition to what's already been said here) that a
newbie *might* not know: when X starts and you wind up at that
seemingly-inescapable grey screen,
I used the netinst from the US mirror and I installed it on an AMD64 system
and everything went fine and after the install when Debian ask's for my
account name and pass it leaves that GUI and goes to nothing but a GRAY
screen and a mouse cursor.
I don't know what to do from here and I'm
On 4/10/07, Christian Hattery [EMAIL PROTECTED] wrote:
I used the netinst from the US mirror and I installed it on an AMD64
system
and everything went fine and after the install when Debian ask's for my
account name and pass it leaves that GUI and goes to nothing but a GRAY
screen and a mouse
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a pppoe-freeradius-ldap system but I have a problem,
when I try to autenticate, freeradius response:
Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:1030, id=57, length=54
Service-Type =
My son had his phone stolen and i can not afford another1 my number is 662 292
4661
--
===
Brought to you by, Cingular Wireless Messaging
http://www.CingularMe.COM/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
the internet.
* This device has to be considered as the unique entry to your
local network (DMZ).
---
Please help, I am desperate.
Jordi
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Feb 26, 2007 at 02:27:51PM -0800, Jordi wrote:
Hello
I am actually a user of Xubuntu Linux, but as it is based on Debian,
and here may be more people that are wise on servers, I come to ask
you for help.
I have 2 computers: one with Xubuntu and the other with Windows XP.
The
On Mon, Feb 26, 2007 at 05:22:12PM -0800, Andrew Sackville-West wrote:
On Mon, Feb 26, 2007 at 02:27:51PM -0800, Jordi wrote:
I have 2 computers: one with Xubuntu and the other with Windows XP.
The Xubuntu machine is connected to the router Thomson Speedtouch
530v6 by ethernet card, and
Hi thanks for replying
My only device is a router. Thomson Speedtouch 530v6. I have not any
other device, nor modem.
I have set the Xubuntu PC to work with static ip using these values:
ip: 192.168.0.129
subnet mask: 255.255.255.0
gateway: 192.168.0.1
then do a ping: ping -c3 www.google.com
The other Windows PC remains configured to use DHCP.
Is there something wrong until this step?
No, all is fine so far. Better yet, try to ping your windoze internal IP
address.
After this, I forwaded the ports 80 and 443 to the Xubuntu PC.
When I type mi static ip (85.etc I think I better
Ok lets start. If you add a module of kernel in the file
/etc/modprobe.d/blacklist with the structure blacklist module_name
in the next boot the kernel will not load the module. With this trick
you can boot many problems which have problem with some modules. So
you can boot on the system and
On Tue, Oct 17, 2006 at 03:29:50PM +0200, Margiolas Christos wrote:
I had the same problem on my laptop. Your problem occured mayby by some
modules which can't recognize your hardware, I think... So you should
add these modules in the blacklist and after If you can boot on your system
On Sun, Oct 15, 2006 at 02:08:33PM +, Tyler wrote:
Success! It turns out I actually had both 2.6.16 AND 2.6.17 installed,
but GRUB was only pointing to 2.6.16. I added an entry for the 2.6.17-2
kernel, add now it boots up with hardly a hesitation. I did have to
reinstall the madwifi
Chris Bannister wrote:
On Sun, Oct 15, 2006 at 02:08:33PM +, Tyler wrote:
Success! It turns out I actually had both 2.6.16 AND 2.6.17 installed,
but GRUB was only pointing to 2.6.16. I added an entry for the 2.6.17-2
kernel, add now it boots up with hardly a hesitation. I did have to
I had the same problem on my laptop. Your problem occured mayby by some modules which can't recognize your hardware, I think... So you should add these modules in the blacklist and after If you can boot on your system install a newier version of linux kernel and after remove the modules from
On Wed, Oct 11, 2006 at 11:13:49PM +, Tyler wrote:
Sven Arvidsson wrote:
What kind of hardware are we talking about? What version of linux are
you using?
I'm running testing with the 2.6.16-2-486, with the madwifi package, on
a Thinkpad R60 with an intel Core Solo processor.
I
Chris Bannister wrote:
No need. Testing has 2.6.17-2-486
For others, 'apt-cache search linux-image'
Success! It turns out I actually had both 2.6.16 AND 2.6.17 installed,
but GRUB was only pointing to 2.6.16. I added an entry for the 2.6.17-2
kernel, add now it boots up with hardly a
Sven Arvidsson wrote:
What kind of hardware are we talking about? What version of linux are
you using?
I'm running testing with the 2.6.16-2-486, with the madwifi package, on
a Thinkpad R60 with an intel Core Solo processor.
I did find a few interesting things using Google. According to
Hi,
I've looked for man pages, I've consulted the oracle (google), I can
find nothing. Please, can anyone tell me what azx_get_response timeout
means? Sometimes this happens a half dozen times when I boot up,
sometimes many dozens of times. It's very frustrating.
I tried attaching the dmesg
On Tue, 2006-10-10 at 12:24 -0300, Tyler Smith wrote:
I've looked for man pages, I've consulted the oracle (google), I can
find nothing. Please, can anyone tell me what azx_get_response timeout
means? Sometimes this happens a half dozen times when I boot up,
sometimes many dozens of times.
-hcd module.
6usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:05:48 Aug 17
2005
usb-uhci.c: High bandwith mode enabled
and then the installation process stopped!
Guys, please help me! What should I do? I really
want Debian in my
Wahyu Aris Darmono wrote:
Linux operating system is really new for me. But after
collected distro comparison from various sources, I
decided to choose Debian.
I have i386 Debian 3.1 rel. 2 Sarge DVD. I tried to
install it onto my Acer Travelmate 2303 NLCi (laptop).
The laptop features are :
Wahyu Aris Darmono wrote:
Linux operating system is really new for me. But after
collected distro comparison from various sources, I
decided to choose Debian.
I have i386 Debian 3.1 rel. 2 Sarge DVD. I tried to
install it onto my Acer Travelmate 2303 NLCi (laptop).
[...]
The NewbieDOC
ehci-hcd module.
6usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:05:48 Aug 17
2005
usb-uhci.c: High bandwith mode enabled
and then the installation process stopped!
Guys, please help me! What should I do? I really want
Debian in my
Wahyu Aris Darmono [EMAIL PROTECTED] wrote:
I tried to install 3 times (automatic installation
method by pressing ENTER only).
Try typing linux26 (without the quotes) before pressing ENTER. This
will use a 2.6 kernel for install. Maybe it will work like this.
HTH
Andrei
--
If you can't
process stopped!
Guys, please help me! What should I do? I really want
Debian in my laptop!
Viva open source, viva Debian!
Aris
(I am in Indonesia, the 3rd rank country in software
piracy. Please help us to change that by using open
source softwares!)
--
www.clivemenzies.co.uk
-- usb-uhci.c: High bandwith mode enabled
--
-- and then the installation process stopped!
--
-- Guys, please help me! What should I do? I really want
-- Debian in my laptop!
--
-- Viva open source, viva Debian!
On both my Acer Aspire lappys have installed from DVD/CD's [slow dialup net
Hello!
I had a similar problem with my Sarge instalation and I got it working
with expert 26 hw-detect/start_pcmcia=false acpi=off noapicat the boot
line. Maybe it helps.
Best Rgrds
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Vilches Martin wrote:
Hello, first of all I have no idea about Debian but Im working on a
pretty nice software base on Debian so I need to work on this J
The software I use is Pluto Home, which is a home automation software.
The thing is that I have a Dell touch screen which I use with my xp
Hello, first of all I have no idea about Debian but
Im working on a pretty nice software base on Debian so I need to work on this J
The software I use is Pluto Home, which is a home
automation software.
The thing is that I have a Dell touch screen which I
use with my xp media center
On Thu, Sep 07, 2006 at 04:51:53PM -0500, Vilches Martin wrote:
Hello, first of all I have no idea about Debian but Im working on a pretty
nice
software base on Debian so I need to work on thisJ
The software I use is Pluto Home, which is a home automation software.
The thing is that I
No one responded to my last post, so I'll try it again. A previously working
scanner is no longer accessible for the group scanner. It works under root.
Something seems to have changed in a recent dist-upgrade.
The device is listed as:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2
On Thursday 24 August 2006 19:10, Christof Hurschler shared this with us all:
-- No one responded to my last post, so I'll try it again. A previously
working scanner is no longer accessible for the group scanner. It works
under root. Something seems to have changed in a recent dist-upgrade.
Von: M-L [EMAIL PROTECTED]
On Thursday 24 August 2006 19:10, Christof Hurschler shared this with us
all:
-- No one responded to my last post, so I'll try it again. A previously
working scanner is no longer accessible for the group scanner. It
works
under root. Something seems to have
Von: M-L [EMAIL PROTECTED]
On Thursday 24 August 2006 19:10, Christof Hurschler shared this with us
all:
-- No one responded to my last post, so I'll try it again. A previously
working scanner is no longer accessible for the group scanner. It
works
under root. Something seems to have
Christof Hurschler wrote:
Von: M-L [EMAIL PROTECTED]
On Thursday 24 August 2006 19:10, Christof Hurschler shared this with us
all:
-- No one responded to my last post, so I'll try it again. A previously
working scanner is no longer accessible for the group scanner. It
works
under root.
On Thu, Aug 24, 2006 at 12:06:03 +0100, Wackojacko wrote:
Christof Hurschler wrote:
On Thursday 24 August 2006 19:10, Christof Hurschler shared this with us
all:
-- No one responded to my last post, so I'll try it again. A previously
working scanner is no longer accessible for the group
Von: Florian Kulzer [EMAIL PROTECTED]
On Thu, Aug 24, 2006 at 12:06:03 +0100, Wackojacko wrote:
Christof Hurschler wrote:
On Thursday 24 August 2006 19:10, Christof Hurschler shared this with
us
all:
-- No one responded to my last post, so I'll try it again. A
previously
working
On Mon, 12 Jun 2006, John Covici wrote:
I have a Debian system where I have the sasl2 library set up -- there
were some problems doing that which I will get to in another message,
but the main problem is that I have used
testsaslauthd with a userid and password using my imap server for
ahh, I didn't know they were different -- there is a mysql in sasl
itself which I might try.
Thanks.
on Wednesday 06/14/2006 Richard A Nelson([EMAIL PROTECTED]) wrote
On Mon, 12 Jun 2006, John Covici wrote:
I have a Debian system where I have the sasl2 library set up -- there
were
I have a Debian system where I have the sasl2 library set up -- there
were some problems doing that which I will get to in another message,
but the main problem is that I have used
testsaslauthd with a userid and password using my imap server for
authentication. The imap server uses a mysql
Good day
I used this command fetchmail u panic a, I thought
I was only going to view emails in panic, unfortunately is deleted all the
email in the inbox.
Is it possible to retrieve the emails?
thanks
On Fri, Apr 21, 2006 at 11:04:36AM +0200, Mamakwa M. Sefiri wrote:
Good day
I used this command fetchmail -u panic -a, I thought I was only going to
view emails in panic, unfortunately is deleted all the email in the
inbox.
Did it delete them or simply fetch them? This incarnation seems
Hi everyone! Thanks for all your help and encoraging.
My X problem solved. It seems to be the async. problem between the X stuff I
installed and my Debian kernel - I upgraded the system to testing and installed
x-window stuff but didn't update the kernel I had from the stable version
Dear all,I am totally newbie to Debian. I heard a lot about it's so good, so I tried to install it on my Dell Dimension 4550, with Win XP home, using mini CD install through network. The installation seemed OK, however it was all text sceen during and after the installation. I didn't found
On Wednesday 22 March 2006 00:09, lmyho wrote:
Dear all,
I am totally newbie to Debian. I heard a lot about it's so good,
so I tried to install it on my Dell Dimension 4550, with Win XP home,
using mini CD install through network. The installation seemed OK,
however it was all text sceen
Hal Vaughan wrote:
On Wednesday 22 March 2006 00:09, lmyho wrote:
Dear all,
I am totally newbie to Debian. I heard a lot about it's so good,
so I tried to install it on my Dell Dimension 4550, with Win XP home,
using mini CD install through network. The installation seemed
Hi Hex! Tahnks for the info! I am downloading It's big! Will have to read and get to know it and use... hope it's good! Also any othe ridea? By the way I responded to Thierry about my graphic card info but forgot to send to the mailing list, here it the info of my card:Just copied the
saludos..
tengo una red de 50 pcs trabajando debian sarge 3.1 ok, pero de las 50 se
cambiaron 10
por pcs con placas intel d945gnt viene con video, audio y red integrado, cuando
instalo
mi debian sarge 3.1 de mi cd usando el kernel 2.6.8.2, pero ni siquiera en la
instalación me detecta mi
El lun, 20-03-2006 a las 09:32 -0500, argos escribió:
saludos..
tengo una red de 50 pcs trabajando debian sarge 3.1 ok, pero de las 50 se
cambiaron 10
por pcs con placas intel d945gnt viene con video, audio y red integrado,
cuando instalo
mi debian sarge 3.1 de mi cd usando el kernel
Alvin Oga wrote:
what exaactly did you type BEFORE you removed the bad disk ??
raidhotadd, raidhotremove, etc, etc.. is required ( aka good idea )
I use mdadm to manage my array. The command was
mdadm --set-faulty /dev/md1 /dev/hda1 --remove /dev/md1 /dev/hda1
(repeated for the other
drbob wrote:
I'll post here if the changes I suggest above have any effect.
regards,
drbob
Before I did this I tried a few different settings in lilo.conf and had
some success :-).
Setting raid-extra-boot=mbr-only avoided the error I was seeing previously:
:/etc# lilo -v
LILO version
hi ya drbob
On Mon, 16 Jan 2006, drbob wrote:
I use mdadm to manage my array. The command was
mdadm --set-faulty /dev/md1 /dev/hda1 --remove /dev/md1 /dev/hda1
i'd think there might be a short cut version, but i'm being
lazy to go look it up
- i'd set it faulty first, if the
Thanks for the advice, I managed to get the system booting off either
disc without further swapping of the drives around though. I set
raid-extra-boot=mbr-only in lilo.conf. This forces lilo to rewrite the
mbr of each disc in the raid1 array and not to the first sector of the
raid1 partition.
Hello,
I've replaced a failed disk in my raid 1 setup. I replaced the disk (hda
on-board ide), however the system then hung on reboot, this was because
hda, being blank, had no MBR. The second disk (hde) is plugged into a
promise ide card. So I went into the bios and set it to boot off the
On Sun, 2006-01-15 at 09:59, drbob wrote:
I've replaced a failed disk in my raid 1 setup. I replaced the disk (hda
on-board ide), however the system then hung on reboot, this was because
hda, being blank, had no MBR. The second disk (hde) is plugged into a
promise ide card. So I went into
Mike Bird wrote:
On Sun, 2006-01-15 at 09:59, drbob wrote:
I've replaced a failed disk in my raid 1 setup. I replaced the disk (hda
on-board ide), however the system then hung on reboot, this was because
hda, being blank, had no MBR. The second disk (hde) is plugged into a
On Sun, 2006-01-15 at 10:40, drbob wrote:
I'm pretty sure it did. Attached are the outputs from fdisk and
mdstat.
They look good. I'm beginning to think that either your partition
table is corrupt or it's a non-DOS type that's too large to leave
room for LILO.
I can't find an fdisk option to
Mike Bird wrote:
They look good. I'm beginning to think that either your partition
table is corrupt or it's a non-DOS type that's too large to leave
room for LILO.
I can't find an fdisk option to ask for the partition table type.
You could try parted /dev/hde print (etc) to verify that both
hi ya drbob
On Sun, 15 Jan 2006, drbob wrote:
I've replaced a failed disk in my raid 1 setup. I replaced the disk (hda
on-board ide),
what exaactly did you type BEFORE you removed the bad disk ??
raidhotadd, raidhotremove, etc, etc.. is required ( aka good idea )
So I went into the
im going to use linux as my server for windows clients what distro should i use out of Debian and Redhat or Fedora core.? i prefer Debian but i doubt... please help me, thank you .. rose
Yahoo! for Good -
Make a difference this year.
--- rozita reza [EMAIL PROTECTED] wrote:
im going to use linux as my server for windows clients what distro
should i use out of Debian and Redhat or Fedora core.?
i prefer Debian but i doubt...
please help me, thank you ..
You are asking a Debian mailing list, so do
rozita reza wrote:
im going to use linux as my server for windows clients what distro
should i use out of Debian and Redhat or Fedora core.?
i prefer Debian but i doubt...
please help me, thank you ..
debian is the most stable. debian has this great community. loads of
people
On (03/01/06 00:26), rozita reza wrote:
im going to use linux as my server for windows clients what distro should i
use out of Debian and Redhat or Fedora core.?
i prefer Debian but i doubt...
please help me, thank you ..
I put some notes on setting up debian servers here:
http
On Tue, Jan 03, 2006 at 10:15:19AM +0100, Thomas Jollans wrote:
rozita reza wrote:
im going to use linux as my server for windows clients what distro
should i use out of Debian and Redhat or Fedora core.?
i prefer Debian but i doubt...
please help me, thank you ..
debian
Clive Menzies wrote:
On (03/01/06 00:26), rozita reza wrote:
im going to use linux as my server for windows clients what distro should i use
out of Debian and Redhat or Fedora core.?
i prefer Debian but i doubt...
please help me, thank you ..
I put some notes on setting up
Hi all,
I can't find how to set a defult and convenient attribute mask when
file are
created on linux.
I need a whole group can write file created by anyone in the group. So
I
need the g=rw be the default permission at file creation.
Actually I get g=r only by default
Thank you very much
You can set your umask to 002 instead of 022 (the default on most Unix
setups). Just add the following line
umask 002
in ~/.bashrc and/or ~/.bash_profile files, for yourself and other people
belonging to the related group.
Hope this helps.
Alain
Roberto a écrit :
Hi all,
I
Roberto wrote:
Hi all,
I can't find how to set a defult and convenient attribute mask when
file are
created on linux.
I need a whole group can write file created by anyone in the group. So
I
need the g=rw be the default permission at file creation.
Actually I get g=r only by default
man
Thanks Alain !
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Atlast solved.i reported this as a bug.but it isn't.the maintainer of
pppoe package asked in email to remove the gateway address and will
work.so my new /etc/network/interfaces looks like this:
cosmic:~# vi /etc/network/interfaces
# This file describes the network interfaces available on your
Hello All,
I got sarge 3.1r0a with a pppoe connection from dataone.i have configured
this connection,able to connect but as title shows,i need to run
'ifconfig eth0 up'.here is /etc/network/interfaces:
already posted this in linuxquestions.org and other sites with no
reply for the past 4 weeks...debian geeks please help me
Prakash Jose Kokkatt wrote:
Hello,
I encountered a kernel panic on sarge after M$ XP reinstalled,which i
tried to recover by all ways which i know.i already recovered grub.the
partition number descended by one number after windows reinstalled;Now
i have sata 80GB disk with '/' at sda8
On (03/12/05 10:10), Kent West wrote:
Prakash Jose Kokkatt wrote:
Hello,
I encountered a kernel panic on sarge after M$ XP reinstalled,which i
tried to recover by all ways which i know.i already recovered grub.the
partition number descended by one number after windows reinstalled;Now
hello,here is the menu.lst briefly put..
--
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specifiv kernels use kopt_x_y_z
## where
On (04/12/05 02:27), Prakash Jose Kokkatt wrote:
hello,
here is the menu.lst briefly put..
--
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want
Hello,
This time luck is with me.i have another kernel too(2.6.8.2smp),i
booted with that kernel successfully;removed and reinstalled 2.6.14smp kernel fixed
the issue no one may be helpful in this situation i have all kind of s/w and libraries from
unstable repo...Like from libc6-2.3.5-8,latest
I googled for azureus console and the first hit should answer your
question.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I just tested btdownloadcurses, btdownloadheadless, btdownloadgui, but
none of them work with 'crontab' or 'at' command. while it work well
if I type the command in the terminal.
Can someone explain why wget can do this kind of job, but azureus,
btdownloadheadless, etc can NOT do it?
anyone use
On Fri, Nov 11, 2005 at 10:51:12AM +0300, Maxim Vexler wrote:
On 11/11/05, Roberto C. Sanchez [EMAIL PROTECTED] wrote:
On Fri, Nov 11, 2005 at 09:06:04AM +1100, Wei Hu wrote:
[snip]
Once possible solution is start up a dummy display and then let your
cron job display to that one,
what i need is a BitTorrent client wich can work with 'crontab' or 'at'.
There are many. Google search for remote X apps or remote X
applications.
-Roberto
Hi, sorry for this simple question.
I am setting up cron jobs in Debian box, the wget program can start
successfully, but the bittorrent client azureus can not start. Can
anyone please tell me what the problem is?
$: crontab -l
10 2 * * * wget www.debian.com
10 2 * * *
On Fri, Nov 11, 2005 at 09:06:04AM +1100, Wei Hu wrote:
Hi, sorry for this simple question.
I am setting up cron jobs in Debian box, the wget program can start
successfully, but the bittorrent client azureus can not start. Can
anyone please tell me what the problem is?
$: crontab -l
10 2
Thank you so much Roberto.
Is there any Bittorrent client I can use at Contab or at (which
doesn't run in Xsession) ? Just a program similiar as wget but using
BitTorrent protocol.
I need to download at 2am, at that time, I won't get up from the bed.
thank again.
Wei
Since azureues has to
On Fri, Nov 11, 2005 at 09:59:24AM +1100, Wei Hu wrote:
Thank you so much Roberto.
Is there any Bittorrent client I can use at Contab or at (which
doesn't run in Xsession) ? Just a program similiar as wget but using
BitTorrent protocol.
I need to download at 2am, at that time, I won't get
On 11/11/05, Roberto C. Sanchez [EMAIL PROTECTED] wrote:
On Fri, Nov 11, 2005 at 09:06:04AM +1100, Wei Hu wrote:
[snip]
Once possible solution is start up a dummy display and then let your
cron job display to that one, either by allowing anyone to display to
the dummy display or by setting
Hi everyone.
I've installed truetype fonts via xfstt font server. I've copied some custom
ttf fonts ( not microsoft's core, but those from different web site there )
to /usr/share/fonts/truetype and font server picked them up. I do see those
fonts in xfontsel. And mozilla is able to display
password..now i am stuck..and am afraid to turn aol off..because i don't have a way of getting back to my mail...PLEASE HELP ME my phone number is 1-772-286-2207..cell is 1-772-559-0095
please call me..please..thank you..
adele
to change it again..to bayabi..it
said
dragonf was not the right password..now i am stuck..and am afraid to turn aol
off..because i don't have a way of getting back to my mail...PLEASE HELP
ME
my phone number is 1-772-286-..cell is 1-772-559-
please call me..please..thank you
went to change it
again..to bayabi..it said
dragonf was not the right password..now i am stuck..and am
afraid to turn aol
off..because i don't have a way of getting back to my
mail...PLEASE HELP ME
my phone number is 1-772-286-..cell is 1-772-559-
please call me..please..thank
On Thu, Sep 15, 2005 at 02:36:16PM -0600, Alejandro Bonilla wrote:
I think it's spam for mailing lists. So, if you reply to the idiot + the
ML, maybe the shit spammer software will know that the emails exist and you
know the rest.
In a momentary lapse of sanity---all is fine now, bleep,
On 09/15/2005 01:36 PM, Alejandro Bonilla wrote:
Vikki Roemer wrote:
[snip AOL user's plea for help]
Where do these lusers keep coming from? *shakes head*
Vikki,
I think it's spam for mailing lists. So, if you reply to the idiot + the
ML, maybe the shit spammer software will know
On Thu, Sep 15, 2005 at 02:36:16PM -0600, Alejandro Bonilla wrote:
I think it's spam for mailing lists. So, if you reply to the idiot + the
ML, maybe the shit spammer software will know that the emails exist and you
know the rest.
That's why I used 'list reply' and only replied here,
On Thu, Sep 15, 2005 at 03:29:31PM -0700, Laura Melton wrote:
Anyway, I don't know where the AOL users come from, either. I would
guess that they google for change password or something, find an
archived post on debian-user, and send off an email without at all
understanding what they're
On 9/15/05, Vikki Roemer [EMAIL PROTECTED] wrote:
On Thu, Sep 15, 2005 at 03:29:31PM -0700, Laura Melton wrote: Anyway, I don't know where the AOL users come from, either.I would
guess that they google for change password or something, find an archived post on debian-user, and send off an email
On Thu, Sep 15, 2005 at 07:07:32PM -0400, Robert Wolfe wrote:
Then again, you should realize, that some of us Debian users DO use Windows
machines as well. I have a Sun Ultra 5 running a customized version of
Debian/Etch and a server running Windows 2000 Pro and one running Windows NT
On Thu, 15 Sep 2005 20:21:46 -0400
[EMAIL PROTECTED] (Vikki Roemer) wrote:
why is this
person emailing *us* for help, and not AOL tech support?.
It's plain that you've not had occasion to call AOL tech suport.
;-]
Cybe R. Wizard
--
Linux is only free if your time is worthless.
On Thu, 2005-09-15 at 20:21 -0400, Vikki Roemer wrote:
On Thu, Sep 15, 2005 at 07:07:32PM -0400, Robert Wolfe wrote:
[snip]
comment about Windows users, it was a comment about, basically, why is this
person emailing *us* for help, and not AOL tech support?.
Because, as scary as it sounds,
501 - 600 of 1642 matches
Mail list logo
