98
>i only use Win98 for some development, please help me !
>What programs may i need , and how to do it
>If you can help me please be specific because i'm a begginer
>and i already like Debian very much !!!
See the "Linux+Win95 HOWTO", which should be in /usr/doc/HOWTO
hi
i got problems download kali linux 2017 it is need to me
(enter an ip address to scan for iscsi taegets . to use aport other than
the default of 3260, use 'ip port' notation, for example '1.2.3.4:3261'.
help me what can i do please?
Hello!
There's longtime I'm looking for
a program on linux as net2phone or dialpad.com applet
on windows, please could you tell me a pgrogram PC-to-Phone
on linux, so I can make free call or cheap call via Internet.
Hi to all!
I am not able to send remote e-mails by 'Exim', but only locally.
I have got a dial-up Linux Box (Debian 2.1), without a local network,
and I wish to deliver e-mails by my ISP's smart host.
I used 'eximconfig', but it didn't seem to set a good configuration for my
needings.
I have cha
My son had his phone stolen and i can not afford another1 my number is 662 292
4661
--
===
Brought to you by, Cingular Wireless Messaging
http://www.CingularMe.COM/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Troub
Hi.
please help me about 3ddesktop and flaming and .
and please help me for minimum requirement graphic card for 3d
desktopn in debian etch 4.
thanks alot.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
im going to use linux as my server for windows clients what distro should i use out of Debian and Redhat or Fedora core.? i prefer Debian but i doubt... please help me, thank you .. rose
Yahoo! for Good -
Make a difference this year.
laptop
a message says
"Error: file "/boot/grub/i386-pc/normal.mod' not found .
Entering rescue mode
grub rescue>
"
Sir, now what can I do to install "Debian" in my laptop uing USB?
Sir,Please help me in detail.
I really need some help here.
How can I have Linux to mount automatically my hard drives
at boot. Because every time I run Linux, I have to mount all
my partitions into separate directories.
Can I create some type of autoexec file?
PLEASE HELP ME
i am looking for crc endec method. i know you are professional.
so, i send this request, and i wish you can help me.
because i don't know the relationship between the algorithm and the circuits.
wish u can help me!
best wishes.Do You Yahoo!?
启用电邮帐号,领会雅虎通[身临其境聊电影]的动感魅力,还有网络摄像头+雅虎通收音机等你来拿
Hi all,
I have installed my Debian on a p2 system. But I am having trouble
connecting my debian system to the internet. Is it possible to fill in
(and try) new values of my proxyserver without installing my Debian
system all over again? If so in which files on my Debian system are the
proxyser
alshemally37 writes:
> i got problems download kali linux 2017 it is need to me
This is a forum for discussing the Debian system in particular, not Kali Linux.
> help me what can i do please?
Seek at the Kali Linux community forums https://www.kali.org/community/>.
--
\ “I went to the c
...
Errors were encountered while processing:
gforge-db-postgresql
gforge-shell-postgresql
E: Sub-process /usr/bin/dpkg returned an error code (1)
krishna@krishna:~$
Please help me how to fix it
Thanks,
Krishna
M.Krishna Sekhar
On Sat, Oct 1, 2011 at 1:05 PM, Krishna Sekhar Mukku
net files /etc/pcmcia/network.opts .
When I restarting the PCMCIA, the card whistle 3 times and your led to be
on.
>From de interior net to server I ping OK. From de server interior net OK.
>From the server to net out receved this message:
wvlan_cs: wvlan0 tx time out resseting card
On Sun, Jan 09, 2000 at 07:53:26PM +, VEVE ROUDY wrote:
> Hello!
>
> There's longtime I'm looking for
> a program on linux as net2phone or dialpad.com applet
> on windows, please could you tell me a pgrogram PC-to-Phone
> on linux, so I can make free call or cheap call via Internet.
>
I know
On Sun, Jan 09, 2000 at 09:05:21PM +0100, Wojciech Zabolotny wrote:
> On Sun, Jan 09, 2000 at 07:53:26PM +, VEVE ROUDY wrote:
> > Hello!
> >
> > There's longtime I'm looking for
> > a program on linux as net2phone or dialpad.com applet
> > on windows, please could you tell me a pgrogram PC-to-
Brad wrote:
>
> On Sun, Jan 09, 2000 at 09:05:21PM +0100, Wojciech Zabolotny wrote:
> > On Sun, Jan 09, 2000 at 07:53:26PM +, VEVE ROUDY wrote:
> > > Hello!
> > >
> > > There's longtime I'm looking for
> > > a program on linux as net2phone or dialpad.com applet
> > > on windows, please could y
--- rozita reza <[EMAIL PROTECTED]> wrote:
> im going to use linux as my server for windows clients what distro
> should i use out of Debian and Redhat or Fedora core.?
> i prefer Debian but i doubt...
> please help me, thank you ..
>
>
You are asking a De
rozita reza wrote:
> im going to use linux as my server for windows clients what distro
> should i use out of Debian and Redhat or Fedora core.?
> i prefer Debian but i doubt...
> please help me, thank you ..
>
debian is the most stable. debian has this great community.
On (03/01/06 00:26), rozita reza wrote:
> im going to use linux as my server for windows clients what distro should i
> use out of Debian and Redhat or Fedora core.?
> i prefer Debian but i doubt...
> please help me, thank you ..
I put some notes on setting up debian
On Tue, Jan 03, 2006 at 10:15:19AM +0100, Thomas Jollans wrote:
> rozita reza wrote:
>
> > im going to use linux as my server for windows clients what distro
> > should i use out of Debian and Redhat or Fedora core.?
> > i prefer Debian but i doubt...
>
Clive Menzies wrote:
On (03/01/06 00:26), rozita reza wrote:
im going to use linux as my server for windows clients what distro should i use
out of Debian and Redhat or Fedora core.?
i prefer Debian but i doubt...
please help me, thank you ..
I put some notes on setting up
Le 25/06/2014 16:55, monirul hasan a écrit :
Humm your message is empty, with a text attachment...
Strange...
> Processor: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz .
>
> Sir, I want to make the following partitions:
>
> Drive name Size Type
>
> /(root)
Le 25/06/2014 17:32, Erwan David a écrit :
> Le 25/06/2014 16:55, monirul hasan a écrit :
>
> Humm your message is empty, with a text attachment...
>
> Strange...
>
>> Processor: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz .
>>
>> Sir, I want to make the following partitions:
>>
>> Drive name
On Wed 25 Jun 2014 at 20:55:02 +0600, monirul hasan wrote:
> using utorrent. During installation a message says that "The missing
> firmware files are :rtl_nic/rtl8105e-1.fw .
At what exact point? (It is not a cause of your main problem, however.
Please read the manual),
>I made my 16GB US
It's much better if your subject line reflects your problem. "Please
help me" doesn't make the topic searchable for anyone else that may have
your same problem. Then you are the sole recipient of the help others
are investing their time in. I'm surprised anyone
On Wed, Jun 25, 2014 at 04:06:45PM -0400, Ric Moore wrote:
>
> It's much better if your subject line reflects your problem. "Please help
> me" doesn't make the topic searchable for anyone else that may have your
> same problem. Then you are the sole recipient of
On Thu 26 Jun 2014 at 22:41:28 +1200, Chris Bannister wrote:
> On Wed, Jun 25, 2014 at 04:06:45PM -0400, Ric Moore wrote:
> >
> > It's much better if your subject line reflects your problem. "Please help
> > me" doesn't make the topic searchable fo
On Thu, Jun 26, 2014 at 07:01:23PM +0100, Brian wrote:
> On Thu 26 Jun 2014 at 22:41:28 +1200, Chris Bannister wrote:
>
> > On Wed, Jun 25, 2014 at 04:06:45PM -0400, Ric Moore wrote:
> > >
> > > It's much better if your subject line reflects your problem. &quo
> >
> > > > It's much better if your subject line reflects your problem. "Please
> > > > help
> > > > me" doesn't make the topic searchable for anyone else that may have your
> > > > same problem. Then you are the sole
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 06/27/2014 01:56 AM, Reco wrote:
> Hi.
>
> On Fri, Jun 27, 2014 at 01:15:53PM +1200, Chris Bannister wrote:
>> Makes you wonder how many people who install Debian and have
>> trouble, write to the list but are not subscribed, and therefore do
>
On Fri, 27 Jun 2014 08:09:57 -0400
The Wanderer wrote:
> >> Makes you wonder how many people who install Debian and have
> >> trouble, write to the list but are not subscribed, and therefore do
> >> not rec a reply.
> >>
> >> You notice a couple now and then.
> >
> > Nobody forbids those people
On Fri, Jun 27, 2014 at 08:09:57AM -0400, The Wanderer wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> On 06/27/2014 01:56 AM, Reco wrote:
>
> > Hi.
> >
> > On Fri, Jun 27, 2014 at 01:15:53PM +1200, Chris Bannister wrote:
>
> >> Makes you wonder how many people who install Debian
On Fri, Jun 27, 2014 at 09:13:01PM +0400, Reco wrote:
>
> Correct. In fact [1] can mislead people into thinking that subscribing
> to the maillist to receive an answer is unnecessary:
tl;dr. which sentence or paragraph gives you this impression?
> [1] http://www.debian.org/MailingLists/index.en
On Sat, 28 Jun 2014 19:34:13 +1200
Chris Bannister wrote:
> On Fri, Jun 27, 2014 at 09:13:01PM +0400, Reco wrote:
> >
> > Correct. In fact [1] can mislead people into thinking that subscribing
> > to the maillist to receive an answer is unnecessary:
>
> tl;dr. which sentence or paragraph gives
On Sat, Jun 28, 2014 at 05:31:37PM +0400, Reco wrote:
> On Sat, 28 Jun 2014 19:34:13 +1200
> Chris Bannister wrote:
>
> > On Fri, Jun 27, 2014 at 09:13:01PM +0400, Reco wrote:
> > >
> > > Correct. In fact [1] can mislead people into thinking that subscribing
> > > to the maillist to receive an a
> I really need some help here.
> How can I have Linux to mount automatically my hard drives
> at boot. Because every time I run Linux, I have to mount all
Put them in /etc/fstab and they'll automatically get mounted at boot.
try "man fstab" for more info.
le?
>
> PLEASE HELP ME!
Do you have a file called "/etc/fstab" ? That is the filesystem table, ie
this is what the system looks at at boot time to determine what disks to
mount. So for example, here's mine:
$ cat /etc/fstab
# /etc/fstab: static file system informa
eed some help here.
> How can I have Linux to mount automatically my hard drives
> at boot. Because every time I run Linux, I have to mount all
> my partitions into separate directories.
> Can I create some type of autoexec file?
>
> PLEASE HELP ME!
>
> __
You wrote:
> I really need some help here.
> How can I have Linux to mount automatically my hard drives
> at boot. Because every time I run Linux, I have to mount all
> my partitions into separate directories.
> Can I create some type of autoexec file?
Take a look at /etc/fstab
and do a "man fs
time I run Linux, I have to mount all
> my partitions into separate directories.
> Can I create some type of autoexec file?
>
> PLEASE HELP ME!
Bob Nielsen Internet: [EMAIL PROTECTED]
Tucson, AZ AMPRnet: [EMAIL PROTECTED]
DM42nh
*- On 4 Mar, Nuno Donato wrote about "Please HELP ME!!!"
> I really need some help here.
> How can I have Linux to mount automatically my hard drives
> at boot. Because every time I run Linux, I have to mount all
> my partitions into separate directories.
> Can I cre
On Thu, 4 Mar 1999, Nuno Donato wrote:
> I really need some help here.
> How can I have Linux to mount automatically my hard drives
> at boot. Because every time I run Linux, I have to mount all
> my partitions into separate directories.
> Can I create some type of autoexec file?
You have such
Please Help me again!
Thanks for helping me with mounting, but now I would like to
ask you another thing.
How can I setup my sound card(Sound Blaster 16)?
I have heard something about "make menuconfig" "make config"
but this doesn't work in my computer. A error me
Dear Sir,
I have downloaded Linux ver. 2.0.0 from ftp site
debian.org . I was able to load it successfully,
I have loaded first 6 floppies and loaded rest
of the operating system by networking.
I tried using SVR4 binaries , as
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Mon, Sep 08, 2003 at 12:51:47PM +0800, ?? wrote:
> i am looking for crc endec method. i know you are professional.
> so, i send this request, and i wish you can help me.
> because i don't know the relationship between the algorithm and the circu
On Mon, Sep 08, 2003 at 12:51:47PM +0800, ?? wrote:
> i am looking for crc endec method. i know you are professional.
> so, i send this request, and i wish you can help me.
> because i don't know the relationship between the algorithm and the circuits.
> wish u can help me!
Have you tried goo
At 10:23 AM 3/5/2004, Akkermans wrote:
I have installed my Debian on a p2 system. But I am having trouble
connecting my debian system to the internet.
I'm kind of new to this myself but will give it a shot.
Can you ping localhost? Can you ping anything else on your lan? What is
your gateway comp
On Fri, 2004-03-05 at 16:23 +0100, Akkermans wrote:
> I have installed my Debian on a p2 system. But I am having trouble
> connecting my debian system to the internet. Is it possible to fill in
> (and try) new values of my proxyserver without installing my Debian
> system all over again? If so i
On 03/10/11 21:55, Krishna Sekhar Mukku wrote:
>
> Hi ,
>
> Did any one got a chance of looking this issue.
Y-e-s
>
>
> Processing triggers for python-gmenu ...
> Rebuilding /usr/share/applications/desktop.en_IN.utf8.cache...
> Processing triggers for python-support ...
> Setting up gforg
Hi! I'm a Debian Linux 2.1 'slink' user, and I have 3 questions:
1. I have compiled the version 2.2.4-intl of Linux Kernel and, at boot
time, my screen shows the following message:
SIOCADDRT: Invalid argument
I have read the documentation, and says that is a bug in pppd
versions 2.2.0 an
Hi to all!
I am not able to send remote e-mails by 'Exim', but only locally.
I have got a dial-up Linux Box (Debian 2.1), without a local network,
and I wish to deliver e-mails by my ISP's smart host.
I used 'eximconfig', but it didn't seem to set a good configuration for
my
needings.
I have ch
ehci-hcd module.
<6>usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:05:48 Aug 17
2005
usb-uhci.c: High bandwith mode enabled
and then the installation process stopped!
Guys, please help me! What should I do? I really want
Debian
-hcd module.
<6>usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:05:48 Aug 17
2005
usb-uhci.c: High bandwith mode enabled
and then the installation process stopped!
Guys, please help me! What should I do? I really
want Debian
Hi,
The aufs is supposed to be able to unify several directories and
provide a merged single directory. but I found it doesn't work for me any
more.
If you have aufs enabled in your system, please help me test the
following command and post back your result:
mkdir /tmp/rw /tmp/aufs
mou
Item Subject: Please HELP ME AGAIN!!!
try changing your directory :-)
Stefan
__ Reply Separator _
Subject: Please HELP ME AGAIN!!!
Author: Non-HP-nunodonato ([EMAIL PROTECTED]) at HP-Germany,shargw6
Date:3/5/99 10:13 AM
On Fri, 5 Mar 1999, Nuno Donato wrote:
> How can I setup my sound card(Sound Blaster 16)?
> I have heard something about "make menuconfig" "make config"
> but this doesn't work in my computer. A error message
> appears saying "no target to make rule config".
> How can I solve this problem.
> I
Subject: Please HELP ME AGAIN!!!
Date: Fri, Mar 05, 1999 at 01:13:31AM -0800
In reply to:[EMAIL PROTECTED]
Quoting [EMAIL PROTECTED]([EMAIL PROTECTED]):
>
> Please Help me again!
> Thanks for helping me with mounting, but now I would like to
> ask you another thi
Ok, concerning 'make menuconfig'
It's a command to start configuration for your own kernel. For that you
have to have the kernel source package installed, it should be in
/usr/src/kernel-*/
Go there, and do either
'make xconfig' or 'make menuconfig' I like the first one, because it's
a GUI so
You should not have to compile the ibcs package. If your system has direct
access to the Internet, start up "dselect" as root and select the FTP
installation method. Select the FTP site as ftp.debian.org and the
distribution as "stable". Select the packages you want, and then watch
as they are down
Hi?
c:\tmp\kbs+-www.kbs.co.kr+-cgi-bin+-test.cgi
c:\tmp\mbc+-ddd.mbc.co.kr+-cwb-bin+-yes.pl
c:\tmp\sbs+-sbs.co.kr+-cgi-bin+-ddd.cgi
=>
move c:\tmp\kbs+-www.kbs.co.kr+-cgi-bin+-test.cgi www.kbs.co.kr+-cgi-bin+-test.cgi
move c:\tmp\mbc+-ddd.mbc.co.kr+-cwb-bin+-yes.pl ddd.mbc.co.kr+-cwb-bin+-yes.pl
Amn Ojee Uw writes:
> I've tried to install Tomcat, different version, like so :
> /# Download the latest release of tomcat 10.1.5//
> //wget
> https://downloads.apache.org/tomcat/tomcat-8/v8.5.85/bin/apache-tomcat-8.5.85.tar.gz//
> //
> //# Create tomcat directory//
> //sudo mkdir /opt/tomcat//
I've installed Apache 1.3.9-13.1 (from frozen)
I can access the default page from my windoze box, but any other page
(including the links on the default page) gives the client 403 Forbidden.
I've checked and all the directories and files should be world accessible
(read, execute world).
Why
On Sat, 1 Apr 2000, José María Pongilioni López <[EMAIL PROTECTED]> wrote:
>Hi! I'm a Debian Linux 2.1 'slink' user, and I have 3 questions:
>
>1. I have compiled the version 2.2.4-intl of Linux Kernel and, at boot
>time, my screen shows the following message:
>SIOCADDRT: Invalid argument
>
>
José María Pongilioni López writes:
> I use my modem with device file /dev/ttyS1 directly). How can I
> workaround this?
Don't. You should use /dev/ttyS1 directly: /dev/modem is a bad idea (and
it isn't a device file: it's just a link to /dev/ttyS1).
--
John Hasler
[EMAIL PROTECTED] (John Hasler
1. [snip]
> 2. My distribution doesn't make some device files, such as /dev/modem,
> /dev/audio, /dev/mixer, /dev/sndstat (I cannot use my SoundBlaster PCI
> 64,
> and I use my modem with device file /dev/ttyS1 directly). How can I
> workaround this?
Those devices, some of htem, are just sym
> > 3. I have the defrag utility. How can I defragment my Linux partition,
> > since a mounted drive cannot be defragmented?
>
> Well, one way is to unmount the partition (umount /zip , f.e) and defrag
> it. If its a /usr or /, then if you really wan to defrag it, then you have
> to do some more w
tely right and proper"
> --Microsoft CEO Steve Ballmer on MSNBC, 01/13/00
> -
>
> - Original Message -
> From: "Lorenzo Zampese" <[EMAIL PROTECTED]>
> To:
> Sent: Tuesday, January 18, 2000 1:22 PM
> Subject: About Exim : PLEASE HELP ME!!!
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have a pppoe-freeradius-ldap system but I have a problem,
when I try to autenticate, freeradius response:
Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:1030, id=57, length=54
Service-Type = Framed-User
Hi,
Could someone help me read the /proc/mdstat file on my Sarge.
I am doing disk mirroring with 2 disks.
at the end of md7 and md5 I have [_U] written
all others have [UU] at their ends.
What does this mean??
has the raid failed in md7 and md5
Please let me know.
Here is the full output
Wahyu Aris Darmono <[EMAIL PROTECTED]> wrote:
> I tried to install 3 times (automatic installation
> method by pressing ENTER only).
Try typing "linux26" (without the quotes) before pressing ENTER. This
will use a 2.6 kernel for install. Maybe it will work like this.
HTH
Andrei
--
If you can't
-uhci.c: $Revision: 1.275 $ time 09:05:48 Aug 17
> 2005
> usb-uhci.c: High bandwith mode enabled
>
> and then the installation process stopped!
>
> Guys, please help me! What should I do? I really want
> Debian in my laptop!
>
> Viva open source, viva Debian!
>
on.
>--> Loading ehci-hcd module.
>--> <6>usb.c: registered new driver usbdevfs
>--> usb.c: registered new driver hub
>--> usb-uhci.c: $Revision: 1.275 $ time 09:05:48 Aug 17
>--> 2005
>--> usb-uhci.c: High bandwith mode enabled
>-->
>--> and then th
Hello!
I had a similar problem with my Sarge instalation and I got it working
with "expert 26 hw-detect/start_pcmcia=false acpi=off noapic"at the boot
line. Maybe it helps.
Best Rgrds
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL
Wahyu Aris Darmono wrote:
Linux operating system is really new for me. But after
collected distro comparison from various sources, I
decided to choose Debian.
I have i386 Debian 3.1 rel. 2 Sarge DVD. I tried to
install it onto my Acer Travelmate 2303 NLCi (laptop).
The laptop features are :
Wahyu Aris Darmono wrote:
Linux operating system is really new for me. But after
collected distro comparison from various sources, I
decided to choose Debian.
I have i386 Debian 3.1 rel. 2 Sarge DVD. I tried to
install it onto my Acer Travelmate 2303 NLCi (laptop).
[...]
The NewbieDOC proje
not the "release" feature, to
work here; however, "release o=Opera Software ASA" also does not work,
nor does adding double-quotes around "deb.opera.com".
So if anyone understands APT pinning... please help me!
Regards,
Michael
PS Again, please CC me, I am not subscribed t
Okay I recompiled the kernel to get my CDBurner to work. Everything is cool
until I goto print. The printer device is totally hosed. I've tried a wide
variety of things to get it to work. I'm at a loss as to what to do next. I
compiled parport and parport_pc as modules
/etc/modules has a line:
I'm sending this to both debian-laptop and debian-user. No one on
debian-laptop has been able to help me with this, but other folks
there might be interested in solutions if anyone on debian-user has
one.
I have a Sony VAIO PCG-838 running Slink, but with a custom-built
2.2.1 kernel. I don't ha
debian-user@lists.debian.org
Hi all,
I've just recently installed the Debian sytem on my computer. It works
perfectly for the "root", but not for the other users. For example when
another user send an e.mail to root, the root receive it but from the
Unknown User (the good UID). An other exampl
At installation of debian I had problems with the internet.
I have typed in all the figuers that shall be inside, still
it dosn't work. I checked twise at etc/inet.d/network all
seems to be correct. After that I even changed Ethernet
cards. from A ne2000 card to a 3com Ethernet link III card
bu
Hi,
My name is Maxwell and a student. I have heard a lot about linux and I would like to switch from windows to linux. I have asked some question about it and and I have also read the tutorials at www.aboutdebian.com (I would want to practice all that). I have finally decided to switch. But I don
Once upon a time Geengun Guim said...
> Hi?
>
> c:\tmp\kbs+-www.kbs.co.kr+-cgi-bin+-test.cgi
> c:\tmp\mbc+-ddd.mbc.co.kr+-cwb-bin+-yes.pl
> c:\tmp\sbs+-sbs.co.kr+-cgi-bin+-ddd.cgi
>
> =>
>
> move c:\tmp\kbs+-www.kbs.co.kr+-cgi-bin+-test.cgi www.kbs.co.kr+-cgi-bin+-test.cgi
> move c:\tmp\mbc+-ddd
I have installed nvidia driver in debian woody, but i still confused in
editing the xconfig-4. Actually i have edit it based on the example, but
fail, it said that server error, no screen found. Since i have backup the
file, so i restore back again. And my problem gone, but still nvidia driver
wont
128 since that is the port Squid uses.
Hope that helped as I am a bit rusty since setting up my home network some
time ago.
Cheers.
> -Original Message-
> From: Chris R. Martin [SMTP:[EMAIL PROTECTED]
> Sent: Sunday, July 16, 2000 5:08 AM
> To: debian-user@lists.debi
I got dependency trouble (in unstable) when trying to do apt-get
dist-upgrade, and so I gave it apt-get -f install.
The following error has deadlocked my whole upgrade path:
Unpacking replacement tetex-base ...
dpkg: error processing
/var/cache/apt/archives/tetex-base_1.0.2+20011202-1_all.deb
On 9/9/05, antgel <[EMAIL PROTECTED]> wrote:
> Siju George wrote:
> > Hi,
> >
> > Could someone help me read the /proc/mdstat file on my Sarge.
> >
> > I am doing disk mirroring with 2 disks.
> >
> > at the end of md7 and md5 I have [_U] written
> > all others have [UU] at their ends.
> >
> > What
Siju George a écrit :
On 9/9/05, antgel <[EMAIL PROTECTED]> wrote:
Siju George wrote:
Hi,
Could someone help me read the /proc/mdstat file on my Sarge.
I am doing disk mirroring with 2 disks.
at the end of md7 and md5 I have [_U] written
all others have [UU] at their ends.
What doe
Hi
Somebody can help me to libpam-mysql configure.
I want to qualify the authentication of the users for FTP, mail and
login.
I was trying to create the archives in /etc/pam.d/ but they do not work
to me.
Somebody can give an example me of like creating those archives
and mysql database .
Hi all,
I can't find how to set a defult and convenient attribute mask when
file are
created on linux.
I need a whole group can write file created by anyone in the group. So
I
need the g=rw be the default permission at file creation.
Actually I get g=r only by default
Thank you very much
Ro
On Wednesday 27 January 2010 14:41:00 Michael Goetze wrote:
> I've struggled with this issue for hours and gotten no help from
> Manpages, nor IRC. So if someone could help me and CC me on their reply
> (as I am not subscribed), I would be very grateful.
Try here: http://wiki.debian.org/AptPrefere
On Wed, Jan 27, 2010 at 9:41 PM, Michael Goetze wrote:
> Hi,
>
> I've struggled with this issue for hours and gotten no help from Manpages,
> nor IRC. So if someone could help me and CC me on their reply (as I am not
> subscribed), I would be very grateful.
>
> I am running a Debian Squeeze system
Hi Boyd,
Boyd Stephen Smith Jr. wrote:
Any specific questions after that, you can contact me via PM and I also watch
the list.
I'm sorry to say your answer didn't help me. I thought the questions in
my original message were already quite specific and demonstrated that I
had understood the ba
Hi Javier,
> Does help Pin: release o=Unofficial* ?
>
> I don't sure, maybe this is a space character issue ? Did you test
with quotes ?
Unfortunately, the suggested line doesn't help. As I already wrote:
> I have also tried "l=" instead of "o=", as well as copy&pasting the
> complete release
In <4b60a4dc.2030...@mgoetze.net>, Michael Goetze wrote:
>I've struggled with this issue for hours and gotten no help from
>Manpages, nor IRC. So if someone could help me and CC me on their reply
>(as I am not subscribed), I would be very grateful.
>
>=== Begin /etc/apt/preferences ===
[...]
>Packa
Hi Boyd,
I think in both these cases you are being bit by having APT::Default-Release
"testing" in /etc/apt/apt.conf(.d). The relevant quote from man 5
apt_preferences is "The target release can be set on the apt-get command line
or in the APT configuration file /etc/apt/apt.conf. Note that
"Shawn P. Garbett" wrote:
>
> Okay I recompiled the kernel to get my CDBurner to work. Everything is cool
> until I goto print. The printer device is totally hosed. I've tried a wide
> variety of things to get it to work. I'm at a loss as to what to do next. I
> compiled parport and parport_pc as
Dear all,
I always run a command like this when I plug a USB disk:
echo 1024 > /sys/block/sdb/device/max_sectors
however, the disk is not always `sdb'. Can I write a udev rule according to
the UUID of the disk?
Best regards,
Yuwen
The solution turned out to be simple: upgrade the kernel. I'd have
thought 2.2.1 would have been sufficient, but upgrading to 2.2.9 made
everything just work.
Thanks to all who replied, especially Graziano, who came up with the
right answer.
> I've just recently installed the Debian sytem on my computer. It works
> perfectly for the "root", but not for the other users. For example when
> Information on user id 1000 not found.
It seems you have a corrupt users database.
Did you cho
1 - 100 of 216 matches
Mail list logo