> >
> For the cdrom
>
> mount /cdrom will normally do it as well.
I tried as 'mount /media/cdrom' and it got through .
> >
> As a matter of interest, which country are you in?
>
I am posting from IRAN .
>
> tshark -r
>
Thank you . I tried as 'tshark output.pcap' and it got through
Hadi Motamedi wrote:
From: motamed...@hotmail.com
To: cele...@gmail.com; debian-user@lists.debian.org
Subject: RE: Upgrade to Lenny?
Date: Sun, 28 Feb 2010 05:23:32 +
Thank you very much you kind guys . At now , I have the tshark installed on my Lenny . But I want to analyze my
On 02/28/2010 03:00 AM, Hadi Motamedi wrote:
# wireshark output.pcap
'cannot open display'
Can you please let me know how can I make use of wireshark to analyze
Try running wireshark as a normal user, not as root. It's not necessary.
--
"Mind if I smoke?"
"I don't care if you burst in
From: motamed...@hotmail.com
To: cele...@gmail.com; debian-user@lists.debian.org
Subject: RE: Upgrade to Lenny?
Date: Sun, 28 Feb 2010 05:23:32 +
>
Thank you very much you kind guys . At now , I have the tshark installed on my
Lenny . But I want to analyze my previou
> Date: Sat, 27 Feb 2010 21:24:34 -0500
> From: cele...@gmail.com
> To: debian-user@lists.debian.org
> Subject: Re: Upgrade to Lenny?
>
> On Sat, 27 Feb 2010 07:47:05 -0800
> ow...@netptc.net wrote:
>
> [lots of quoted stuff]
>
>
On Sat, 27 Feb 2010 07:47:05 -0800
ow...@netptc.net wrote:
[lots of quoted stuff]
People, trim please!
Celejar
--
foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator
mailmin.sourceforge.net - remote access via secure (OpenPGP) email
ssuds.sourceforge.net - A Simple Sudoku Solv
On Sat, Feb 27, 2010 at 07:47:05AM -0800, ow...@netptc.net wrote:
[... snipped 115!! lines of unnecessary quoting ...]
> >>Can you please let me know how to modify it to have ethereal
> >installed on my Lenny ?
> >>
> Ethereal is now called Wireshark
> Larry
Please learn to trim your replies at
>
>
>
> Original Message
>From: motamed...@hotmail.com
>To: debian-user@lists.debian.org
>Subject: RE: Upgrade to Lenny?
>Date: Sat, 27 Feb 2010 12:00:45 +
>
>>
>>
>>
>>
>>> Date: Sat, 27 Feb 2010 11:16:43 +
On Sat, Feb 27, 2010 at 12:00:45PM +, Hadi Motamedi wrote:
>
> > If you can, please post any results / error messages.
> > Also, you don't say what country you're in : it may be that support
> > resources are available closer to hand :)
> >
>
> #apt-get install ethereal
>
> But it cannot f
* Hadi Motamedi:
> Thank you so much . At now , my Lenny has access to Internet . I
> wanted to install ethereal on my Lenny by trying as :
>
> #apt-get install ethereal
>
> But it cannot find it .
Ethereal has been renamed to Wireshark, so just install the latter.
--
To UNSUBSCRIBE, email to
> Date: Sat, 27 Feb 2010 11:16:43 +
> From: amaca...@galactic.demon.co.uk
> To: debian-user@lists.debian.org
> Subject: Re: Upgrade to Lenny?
>
> On Sat, Feb 27, 2010 at 10:55:12AM +, Hadi Motamedi wrote:
> >
> > Thank you . I modified my Le
On Sat, Feb 27, 2010 at 10:55:12AM +, Hadi Motamedi wrote:
>
> Thank you . I modified my Lenny settings as the followings :
>
> - under /etc/network/interfaces
>
> auto lo
>
> iface lo inet loopback
>
> allow-hotplug eth0
>
> iface eth0 inet static
>
> address 192.168.10.114
>
> netmask
> Date: Sat, 27 Feb 2010 10:28:53 +
> From: amaca...@galactic.demon.co.uk
> To: debian-user@lists.debian.org
> Subject: Re: Upgrade to Lenny?
>
> On Sat, Feb 27, 2010 at 09:13:26AM +, Hadi Motamedi wrote:
> >
> > > > It is now running versio
On Sat, Feb 27, 2010 at 09:13:26AM +, Hadi Motamedi wrote:
>
> > > It is now running version 5.0.4 . But
> > > surprisingly I cannot connect it to Internet , as I did previously . I am
> > > trying as the followings :
> > >
> > >#ifconfig eth0 ip-address netmask netmask-bits up
Herewith a cor
> From: b...@iguanasuicide.net
> To: debian-user@lists.debian.org
> Subject: Re: Upgrade to Lenny?
> Date: Sat, 27 Feb 2010 01:03:59 -0600
>
> In , Hadi Motamedi wrote:
> >I upgraded my
> > Debian box from Sarge to Lenny .
>
> Did you read the Release
In , Hadi Motamedi wrote:
>I upgraded my
> Debian box from Sarge to Lenny .
Did you read the Release Notes? If not, you should.
Also note that going directly from Sarge to Lenny isn't really supported -- it
may or may not have worked completely. You should have done an intermediate
upgrade to
On Sat, Sep 19, 2009 at 12:21:28AM -0400, Tom Clark wrote:
> I have a dual boot system (windows on one drive for web development
> tools I owned) and LENNY on the other drive.
>
> I had a consultant do the initial system. For the last 6 months, I have
> been asking on how to upgrade to the stabl
Pavlos Parissis wrote:
> Hi all,
>
> This morning I upgraded my etch desktop to lenny.
> All went ok but with 3 small issues.
>
Hello,
I upgraded my firewall server yesterday. I did upgrade from sarge -> etch ->
lenny as proposed here before.
Everything worked just fine. I hope I can upgrade
Pavlos Parissis wrote:
> On Mon, 16 Feb 2009 07:39:11 -0600
> Kent West wrote:
>
>
>> Sven Joachim wrote:
>>
>>> On 2009-02-15 23:59 +0100, Pavlos Parissis wrote:
>>>
>>>
>>>
This morning I upgraded my etch desktop to lenny.
All went ok but with 3 small issues.
>>>
On Mon, 16 Feb 2009 07:39:11 -0600
Kent West wrote:
> Sven Joachim wrote:
> > On 2009-02-15 23:59 +0100, Pavlos Parissis wrote:
> >
> >
> >> This morning I upgraded my etch desktop to lenny.
> >> All went ok but with 3 small issues.
> >>
> >> 1) Exim was refusing to start up due to no zero siz
Sven Joachim wrote:
> On 2009-02-15 23:59 +0100, Pavlos Parissis wrote:
>
>
>> This morning I upgraded my etch desktop to lenny.
>> All went ok but with 3 small issues.
>>
>> 1) Exim was refusing to start up due to no zero size on the paniclog file.
>> The file was reporting a configuration erro
On 2009-02-15 23:59 +0100, Pavlos Parissis wrote:
> This morning I upgraded my etch desktop to lenny.
> All went ok but with 3 small issues.
>
> 1) Exim was refusing to start up due to no zero size on the paniclog file.
> The file was reporting a configuration error on specific line, but not on th
On Sun, Feb 15, 2009 at 6:59 PM, Pavlos Parissis wrote:
> Hi all,
>
> This morning I upgraded my etch desktop to lenny.
> All went ok but with 3 small issues.
>
> 1) Exim was refusing to start up due to no zero size on the paniclog file.
> The file was reporting a configuration error on specific l
23 matches
Mail list logo
