On Fri, Aug 10, 2001 at 03:17:09AM -0400, Michael Mueller wrote:
>
> I double checked - there is no way to set CPU clk speed on Biostar M7VKB rev
> 1 board. It must be set by a Duron-Mainboard interaction.
>
> I'll try some kernel compiling and different cables to see if the problem
> pops up wi
Ian Perry wrote:
I had a similar message while loading from CD. I had configured the machine
with the HD as primary master, and the CD as primary slave. The fix was to
put the CD onto the secondary slave.
Ian
I get the same messages but my CD-ROM is hdd. I have 2 HD's on the
primary IDE
- Original Message -
From: "Ian Perry" <[EMAIL PROTECTED]>
To: "'Michael Mueller'" <[EMAIL PROTECTED]>;
Sent: Friday, August 10, 2001 1:59 AM
Subject: RE: dselect and hda:irq timeout
>
> > > > From: Michael Mueller [mailto:[EMAIL
> > > From: Michael Mueller [mailto:[EMAIL PROTECTED]
> > > Sent: Friday, August 10, 2001 2:36 PM
> > >
> > > While dselect is installing, I get intermittent errors. The
> > > dselect process
> > > continues to completion and I seem to be able to use what has been
> > > installed.
> > >
> > > The
- Original Message -
From: "Ian Perry" <[EMAIL PROTECTED]>
To: "'Michael Mueller'" <[EMAIL PROTECTED]>;
Sent: Friday, August 10, 2001 12:29 AM
Subject: RE: dselect and hda:irq timeout
> > From: Michael Mueller [mailto:[EMAIL PROT
Michael,
This should have gone to you
cc to list
Ian
> -Original Message-
> From: Chun Kit Edwin Lau [mailto:[EMAIL PROTECTED]
> Sent: Friday, August 10, 2001 3:49 PM
> To: Ian Perry
> Subject: Re: dselect and hda:irq timeout
>
>
> Hi,
>
> Long tim
> From: Michael Mueller [mailto:[EMAIL PROTECTED]
> Sent: Friday, August 10, 2001 2:36 PM
>
> While dselect is installing, I get intermittent errors. The
> dselect process
> continues to completion and I seem to be able to use what has been
> installed.
>
> The error messages are as follows:
>
> h
While dselect is installing, I get intermittent errors. The dselect process
continues to completion and I seem to be able to use what has been
installed.
The error messages are as follows:
hda: irq timeout: status = 0x0d { Busy }
ide0: reset: success
Any ideas on why these messages appear?
I'v
8 matches
Mail list logo
