Le lundi 26 juin 2006 21:21, Julien Cornuwel a écrit :
laurent besson a écrit :
Le dimanche 25 Juin 2006 19:13, Julien Cornuwel a écrit :
snmp
Est-il installé ?
Oui bien sûr...
snmp et snmpd étaient installés avant.
J'ai trouvé munin qui fait la même chose en plus simple mais je suis
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Bonjour à tous,
J'ai installé cacti de la façon la plus simple du monde (aptitude
install cacti php4-snmp) et pourtant, sur la page about de cacti, il
affiche *PHP SNMP support: no*.
C'est assez gênant car je ne peux pas monitorer mes interfaces
Le dimanche 25 Juin 2006 19:13, Julien Cornuwel a écrit :
snmp
Est-il installé ?
Bonjour,
J'essaye d'installer snmp+mrtg sur une Sarge.
Les paquets s'installent sans problème, mais le cfgmaker de MRTG
n'arrive pas à dialoguer avec SNMP.
#pour SNMP, j'ai ajouté com2sec readonly localhostpublic dans
snmpd.conf
Si je fais snmpwalk -c public localhost, j'ai
Caros,
preciso configurar o nagios com snmp (usando o protocolo snmp para
monitorar) encontrei alguma documentação mas nao ta funionando, será que
alguem já fez isso e se fez pode me dar alguma dica.
Att.
--
Leandro Moreira
Linux Networking
Telefone: +55 (32) 9197-7909
E-mail/MSN: [EMAIL
to bandwidth
utilization. the plus side to that is that is pretty simple to setup.
'cacti' seems to be more full featured. but only for monitoring as well. i
haven't found any 'managing' software for SNMP in debian yet.
Robson
http://bu.bee.pl
--
anoop aryal
[EMAIL PROTECTED
.
J'aimerais également disposer de statistiques sur la charge réseeau sur
chaque interface des machines monitorées par cacti (j'ai des machines avec
plusieurs interfaces réseau).
Que dois-je changer au fichier config /etc/snmp/snmpd.conf pour arriver à
mes fins ? Il y-a-t-il d'autres choses à
Brad Brock wrote:
I want to use a software that can manage several PC
Routers (with debian running on them). What software
should I use to manage them? Especially to manage
bandwith, a kind of traffic control among interfaces
on each router. Thank you.
I want to use a software that can manage several PC
Routers (with debian running on them). What software
should I use to manage them? Especially to manage
bandwith, a kind of traffic control among interfaces
on each router. Thank you.
__
Do You
charge réseeau sur chaque
interface des machines monitorées par cacti (j'ai des machines avec plusieurs
interfaces réseau).
Que dois-je changer au fichier config /etc/snmp/snmpd.conf pour arriver à mes
fins ?
Il y-a-t-il d'autres choses à faire ?
Merci pour l'aide
STef
06-04-09, bns [EMAIL PROTECTED] napisał(a):
Chetnie poczytam jesli ktos opisze jak skonfigurowac
snmp na zdalnym hoscie i jakie informacje mozna za pomoca snmp wyciagac.
Opisz OID'ow tez by sie przydal.
podlaczam sie pod prosbe ;)
konfiguracja (podstawowa) jest prosta:
- instalujesz
Plotting traffic graphs is one of the most popular UNIX admin tasks.
MRTG is a great tool and it is widely used for plotting traffic graphs.
It can be easily set up to plot statistics for any SNMP-enabled device
(including Linux servers running snmpd). But sometimes we can not setup
snmp
komputer na ktorym masz cacti to nie potrzebujesz snmp. Mozesz
wykorzystac skrypty pobierajace okreslone dane i z ktorych to cacti
wykresli ladnie statystyki. Wiele skryptow jest dostepnych w samym cacti
wiec nie bedziesz musial nawet sie meczyc ;) No chyba ze potrzebujesz
cos malo standardowego.
z
bns wrote:
Witam
Zainstalowalem sobie Cacti http://www.cacti.net
Walcze pol dnia zeby doprowadzic to do dzialania. Jak zakladam nowy
'Device' do wyswietlania statystyk wyskakuje mi error SNMP error a co
za tym idzie nie wyswietlaja sie statystyki danego hosta.
Statystyki servera na
Witam
Zainstalowalem sobie Cacti http://www.cacti.net
Walcze pol dnia zeby doprowadzic to do dzialania. Jak zakladam nowy
'Device' do wyswietlania statystyk wyskakuje mi error SNMP error a co
za tym idzie nie wyswietlaja sie statystyki danego hosta.
Statystyki servera na ktorym dziala Cacti
Buenas,
He instalado el servidor de snmp (snmpd). Mi intencion visualizar los
recursos de la maquina desde otros ordenadores, pero el problema que
tengo es que únicamente me deja conectarme desde localhost, no desde
cualquier otro equipo de la red. No hay ningun firewall instalado.
Esta es
E ai pessoal, blz?
Preciso de informaes sobre o SNMP, hehehe vi
algumas coisas na internet, e estou mexendo agora olha soh estou integrando o
snmp com o mrtg e preciso de algumas informaes...
Descobri que isso:
Target[tahoe.swap]:
memAvailSwap.0memTotalSwap.0:[EMAIL
Problemas resolvidos obrigado
De: THIAGO ANDERSON
SANTOS [mailto:[EMAIL PROTECTED]
Enviada em: terça-feira, 7 de
março de 2006 20:01
Para:
debian-user-portuguese@lists.debian.org
Assunto: SNMP
E ai pessoal, blz?
Preciso de informações sobre o SNMP, hehehe vi algumas
Windows et c'est OIDView.
2006/2/22, Frédéric BOITEUX [EMAIL PROTECTED]:
Bonjour,
J'aurais besoin d'outils pour interroger un équipement réseau en SNMP,
et
j'aimerais avoir vos avis sur ce que vous utilisez ! J'avais essayé une
fois
mbrowse, mais je ne le trouve pas très facile
Bonjour,
J'aurais besoin d'outils pour interroger un équipement réseau en SNMP, et
j'aimerais avoir vos avis sur ce que vous utilisez ! J'avais essayé une fois
mbrowse, mais je ne le trouve pas très facile d'utilisation, en connaissez-vous
d'autres ?
Outre un outil avec une IHM
]:
Bonjour,J'aurais besoin d'outils pour interroger un équipement réseau en SNMP, etj'aimerais avoir vos avis sur ce que vous utilisez ! J'avais essayé une foismbrowse, mais je ne le trouve pas très facile d'utilisation, en connaissez-vous
d'autres ?Outre un outil avec une IHM graphique pour 'chercher' les
to install SNMP, how to install and configure SNMP to monitor these requests.Thanks for your help
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre.
are returned, which are incorrect.
IF-MIB::ifSpeed.2 = Guage32: 0
IF-MIB::ifOperStatus.2 = INTEGER down (2)
However the MAC address shows correctly,
ifInOctets has a value of 1601527752
ifOutOctets has a value of 2823843372
ifAdminStatus is correct at up (1)
I think this means that even though snmp
Pessoal:
Eu não estou conseguindo dar snmpget ou snmpwalk nos MIBs IF-MIB numa
máquina Debian. Só tem os MIBs SNMPv2-MIB
# dpkg -l | grep snmp
ii libnet-snmp-pe 5.0.1-1Script SNMP connections
ii libsnmp-base 5.1.2-6.1 NET SNMP (Simple Network Management Protocol
ii libsnmp
Pessoal:
O problema já foi resolvido.
Acontece o seguinte.
No arquivo /etc/snmp/snmpd.conf tem a configuração das comunidades
(communities)
# sec.name source community
com2sec paranoid default public
#com2sec readonly default public
#com2sec readwrite
Hola lista, estoy tratando de utilizar net-snmp y quiero intentar agregar
una entrada a la tabla de enrutamiento:
snmpd.conf:
--
rocommunity monitor 192.168.1.0/24
rwcommunity control 192.168.1.1/32
--
# snmpset -v2c -c control
are returned, which are incorrect.
IF-MIB::ifSpeed.2 = Guage32: 0
IF-MIB::ifOperStatus.2 = INTEGER down (2)
However the MAC address shows correctly,
ifInOctets has a value of 1601527752
ifOutOctets has a value of 2823843372
ifAdminStatus is correct at up (1)
I think this means that even though snmp
Amigos,
estou com muitas dificuldades para configurar o
snmpd.conf , alguém aqui sabe que configurações devem ser feitas para pegar as
interfaces de rede por exemplo? Preciso controlar as interfaces de rede dos meus
servidores via snmp mas não sei configurar o snmpd.conf para fazer
isso
]
To: grupo do debian debian-user-portuguese@lists.debian.org
Sent: Friday, October 21, 2005 12:13 AM
Subject: Re: snmp
Harlei Liguori Marcelino wrote:
Acho que é porque não mexi no arquivo /etc/snmp/snmpd.conf alguém
aí conhece algum link bom que explica como mexer nesta arquivo
Amigo, já deu uma olhada em
apt-cache search snmp
Em 21/10/05, Harlei Liguori Marcelino[EMAIL PROTECTED] escreveu:
Puts... está bem dificil encontrar uma literatura boa e com entendimento
facil... mas continuarei procurando... preciso liberar ao menos algumas
informações, como OID das
Instalar instala... mas, tem um arquivo de configuração /etc/snmp/snmpd.conf
que não consigo configurar direito... e naum sei mais oque tentar...
abraços
Harlei
- Original Message -
From: Mateus Pedroso [EMAIL PROTECTED]
To: Harlei Liguori Marcelino [EMAIL PROTECTED]
Cc: Marcos
Harlei Liguori Marcelino wrote:
Instalar instala... mas, tem um arquivo de configuração /etc/snmp/snmpd.conf
[...]
O papo tá bom, mas uma única cópia das msgs é suficiente: vcs poderiam parar
de me copiar nas msgs?
Obrigado,
Marcos
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Que tal uma olhada em http://net-snmp.sourceforge.net/ ?
Aproveita e manda um cartão postal :-)
Fabiano
Em 21/10/05, Marcos Vinicius Lazarini[EMAIL PROTECTED] escreveu:
Harlei Liguori Marcelino wrote:
Instalar instala... mas, tem um arquivo de configuração /etc/snmp/snmpd.conf
[...]
O
Amigos,
já tentei instalar o snmp e snmpd para fazer o snmp
funcionar no debian, mas não está funcionando ainda... qual apt-get eu tenho que
dar para instalar o snmp no debian? Preciso pegar os OIDs com o GETIF dos
equipamentos linux mas para isso preciso do snmp funcionando...
aguardo
Por favor retirar a lista do debian da lista de
spam neste e-mail para não receber esta msg sempre que enviar alguma coisa pra
lista...
abraços
Harlei
- Original Message -
From: AntiSpam
UOL
To: harlei
Sent: Thursday, October 20, 2005 9:19 AM
Subject: RE: snmp
Acho que é porque não mexi no arquivo
/etc/snmp/snmpd.conf alguém aí conhece algum link bom que explica como
mexer nesta arquivo... no google tem mts mas só com configurações para o MRTG
que não é oque eu procuro...
abraços
Harlei
- Original Message -
From:
Harlei
Harlei Liguori Marcelino wrote:
Acho que é porque não mexi no arquivo /etc/snmp/snmpd.conf alguém
aí conhece algum link bom que explica como mexer nesta arquivo... no
google tem mts mas só com configurações para o MRTG que não é oque eu
procuro...
Já deu uma olhada nos seguintes locais
Buen día, me encuentro intentando hacer funcionar el servicio SNMP en
un equipo LINUX que tiene la empresa, he probado con los manuales que
he encontrado en los foros, pero hasta ahora sólo funcionan las
peticiones en el localhost.
Si alguien ha hecho esta configuración o si saben de algún manual
question is: is there an
API I an use for this job?
EJBs spec. does not permmit the use of sockets, I need
an OpenSource resouce.
I saw you recommended net-snmp, but it is a complete
NMS, I need just the necessary clases for developing
it, not a complete NMS.
please, reply me
regards
not permmit the use of sockets, I need
an OpenSource resouce.
I saw you recommended net-snmp, but it is a complete
NMS, I need just the necessary clases for developing
it, not a complete NMS.
please, reply me
regards.
__
Correo Yahoo!
Espacio para
Hi,
Is it possible to use SNMP for viewing 1.3.6.1.2.1.2.2.1.10.1 (out
ethernet) en 1.3.6.1.2.1.2.2.1.16.1 (in ethernet) on a Debian Sarge
based router?
If so, what else should I do besides apt-get install snmp snmpd? It
looks to me that none of the MIBS in /usr/share/snmp/mibs are used
Hi Michael,
Michael Dauer [EMAIL PROTECTED] wrote:
Frank Dietrich wrote:
Michael Dauer [EMAIL PROTECTED] wrote:
in welchem MIB finde ich den IO einer USB-Disk (sda) in Bytes?
Mir ist zwar nicht klar wie das zusammenhängen soll. Aber schau
Dir mal die Pakete snmp und mbrowse an. Mit
die Transferrate der einzelnen Disks zeigte. Also gibt es
unter Linux wohl Counter für die zu Devices übertragenen Bytes.
Ich gehe nun davon aus, dass ich auf diese Counter auch mit SNMP zugreifen
kann. Nur finde ich die entsprechenden OIDs nicht.
Gruß
Mick
--
Haeufig gestellte Fragen und
.
schau dir mal dstat an.
[...]
Ich gehe nun davon aus, dass ich auf diese Counter auch mit SNMP
zugreifen kann. Nur finde ich die entsprechenden OIDs nicht.
wenn du's unbedingt uebers netzwerk machen willst, solltest du den snmpd
mal nach fragen[1] und den entsprechenden eintrag raussuchen
Monaten unter SUSE mit einem KDE-Tool etwas in
/proc/ angezeigt, das mir die Transferrate der einzelnen Disks zeigte. Also
gibt es unter Linux wohl Counter für die zu Devices übertragenen Bytes.
Ich gehe nun davon aus, dass ich auf diese Counter auch mit SNMP zugreifen
kann. Nur finde ich die
Hallo,
in welchem MIB finde ich den IO einer USB-Disk (sda) in Bytes?
Gruß
Mick
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL
Hi Michael,
Michael Dauer [EMAIL PROTECTED] wrote:
in welchem MIB finde ich den IO einer USB-Disk (sda) in Bytes?
Mir ist zwar nicht klar wie das zusammenhängen soll. Aber schau Dir
mal die Pakete snmp und mbrowse an. Mit einem der Tools kannst Du auch
die MIB eines Gerätes auslesen.
Hier noch
Frank Dietrich wrote:
Hi Michael,
Michael Dauer [EMAIL PROTECTED] wrote:
in welchem MIB finde ich den IO einer USB-Disk (sda) in Bytes?
Mir ist zwar nicht klar wie das zusammenhängen soll. Aber schau Dir
mal die Pakete snmp und mbrowse an. Mit einem der Tools kannst Du auch
die MIB
/snmp/snmp.html
SuerteOn 8/27/05, Gerardo Gomez [EMAIL PROTECTED] wrote:
No me funciona el SNMP en Debian Sarge...El servicio esta levantado segun aparece al hacer un ps ax | grep snmpme devuelve: 6659 ?S0:00 /usr/sbin/snmpd -Lsd -Lf/dev/null -p /var/run/snmpd.pid
6665 ?Ss 0:00 /usr/sbin
No me funciona el SNMP en Debian Sarge...
El servicio esta levantado segun aparece al hacer un
ps ax | grep snmp
me devuelve:
6659 ?S 0:00 /usr/sbin/snmpd -Lsd -Lf
/dev/null -p /var/run/snmpd.pid
6665 ?Ss 0:00 /usr/sbin/snmptrapfmt -D -f
/etc/snmp/snmptrapfmt.conf
): At line 1 in (none)
.
.
.
ssRawCpuUser.0: Unknown Object Identifier (Sub-id not found: (top) -
ssRawCpuUser)
/usr/local/share/snmp/mibs/.index dosyasinin bos oldugunu farkettim,
bu dosyayi otomatik olusturmasi bekleniyor sanirim,
is yerindeki debian'dan /usr/share/snmp/mibs/.index dosyasini kendi
Bonjour à tous,
Quelqun connait-il un programme qui fonctionne sous X et non en console
pour gérer SNMP.
Merci.
Cristophe.
=
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs
Le jeudi 18 août 2005 à 14:22 +0200, [EMAIL PROTECTED] a
écrit :
Bonjour à tous,
Quelqun connait-il un programme qui fonctionne sous X et non en console
pour gérer SNMP.
Que veux-tu dire par gérer SNMP ?
--
Raphaël 'SurcouF' Bordet
http://debianfr.net/ | surcouf at debianfr dot net
'SurcouF' Bordet a écrit :
Le jeudi 18 août 2005 à 14:22 +0200, [EMAIL PROTECTED] a
écrit :
Bonjour à tous,
Quelqun connait-il un programme qui fonctionne sous X et non en console
pour gérer SNMP.
Que veux-tu dire par gérer SNMP ?
--
Pensez � lire la FAQ de la liste avant de poser une
Raphaël 'SurcouF' Bordet
Le jeudi 18 août 2005 à 14:22 +0200, [EMAIL PROTECTED] a
écrit :
Bonjour à tous,
Quelqun connait-il un programme qui fonctionne sous X et non en console
pour gérer SNMP.
Que veux-tu dire par gérer SNMP ?
Je pense qu'il parlait d'avoir à disposition une interface
ROlocal anynoauth exact all none none
---snip---
'Funktioniert' heisst bei mir, dass ich von 172.16.2.100 ein 'snmpwalk
mymachine MyCommunity' machen kann und ich jede Menge SNMP-Output kriege.
Nu gehts los: Ich will jetzt eine 'exec'-Zeile haben um die Ausgabe
eines simplen
sline wrote:
Comment ajouter une mib sur un serveur linux ?
En placant le fichier mib avec les autres, c'est à dire dans
/usr/share/snmp/mibs
Où trouver une mib qui trace du traffic data et du taffic voice ?
Pas compris la question.
Pour tracer du traffic, quelquesoit ce que vous
Hallo !
Ich versuche gerade, unseren Cisco Router ein paar Daten abzugreifen.
Mittels snmp komme ich eigentlich auch an alle notwendigen Sachen
ausser, den Tagestraffic. Mittels mrtg hab ich auch so meine schoenen
Diagramme, nur laesst sich damit leider nicht sagen, ich produzier hier
im
Also sprach Stefan Lindecke [EMAIL PROTECTED] (Thu, 21 Jul 2005
10:49:43 +0200):
Hallo !
hallo,
Ich versuche gerade, unseren Cisco Router ein paar Daten abzugreifen.
Mittels snmp komme ich eigentlich auch an alle notwendigen Sachen
ausser, den Tagestraffic. Mittels mrtg hab ich auch so
Bonjour,
Comment ajouter une mib sur un serveur linux ?
Où trouver une mib qui trace du traffic data et du taffic voice ?
Merci
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs From et
On Thu, Jul 14, 2005 at 08:35:27AM -0300, Miguel wrote:
Well, here we go! After browsing the squid-users list, I figured out.
First problem, the squid documentation says that squid uses snmp 1 and 2,
but
de facto only version 1 works AFAIK.
And I dont know what is the meaning of this number
gw:~# snmpwalk localhost:3401 -v 2c -c pb
Timeout: No Response from localhost:3401
I have exactly the same problem on a new proxy server I am building.
Regards
Johann
--
Johann Spies Telefoon: 021-808 4036
Informasietegnologie, Universiteit van Stellenbosch
God is faithful, by
Well, here we go! After browsing the squid-users list, I figured out.
First problem, the squid documentation says that squid uses snmp 1 and 2,
but
de facto only version 1 works AFAIK.
And I dont know what is the meaning of this number: .1.3.6.1.4.1.3495.1.1
This command returns some information
Well, I configured Squid to use the snmp support.
Added this to squid.conf:
snmp_port 3401
acl pb snmp_community public
snmp_access allow pb
Netstat shows me that the port 3401 is bound to squid and listening:
gw:~# netstat -apnu
Active Internet connections (servers and established)
Proto Recv
Hi,
I'm monitoring various crap on my networkw/ cacti. The problem i'm
having is that some of the counters in snmp (specifically
ssRawContexts.0 and ssRawInterrupts.0) have reached the limit of an
unsigned long int (4294967295). How can i reset this value?
Apparantely it cannot be done through
Angel, muchas Gracias.
En parte ya me solucionaste el problema, el de
desinstalar el net-snmp con MAKE UNINSTALL
Con respecto al MRTG, ya lo tengo instalado y
funcionando, de hecho estoy monitoreando unos Windows
de mi red interna.
El problema es con el SNMP en el mismo equipo donde
corre el
Gerardo Gomez wrote:
El problema es con el SNMP en el mismo equipo donde
corre el MRTG ya que no me funciona y no puedo
monitorear el servidor linux debian sarge en donde
tengo mis servicios.
Si tenes otra pista... bienvenida sea
Quizás esto te venga bien:
http
): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (HOST-RESOURCES-MIB): At line 0 in
(none)
donde las puedo ubicar??
Gracias nuevamente!!!
--- [EMAIL PROTECTED] escribió:
Gerardo Gomez wrote:
El problema es con el SNMP en el mismo equipo
donde
Hola, me presento: me llamo Gerardo, vivo en
Argentina.
Tengo problemas para hacer andar SNMP en un debian
sarge.
primero lo instale con apt-get, pero cuando hacia un
snmpget me devolvia timeout
despues compile el net-snmp y corri el snmpconf...
pero ahora no se desde donde hacer que el
El dom, 26-06-2005 a las 16:48 -0300, Gerardo Gomez escribió:
Hola, me presento: me llamo Gerardo, vivo en
Argentina.
Tengo problemas para hacer andar SNMP en un debian
sarge.
primero lo instale con apt-get, pero cuando hacia un
snmpget me devolvia timeout
despues compile el net-snmp
Hi,
I'm trying to set up snmp on my system, but i've run into a few
difficulties. Some queries w/ snmp work fine (for example, uptime,
ssRawContexts, etc.), but some i can't load. I want to set up cpu
monitoring of some of my hosts w/ cacti, but for some reason i can't
get to the cpu stuff w
On Fri, Jun 17, 2005 at 04:47:07PM IST, Rakotomandimby (R12y) Mihamina
[EMAIL PROTECTED] incoherently babbled:
Hello,
root-maildpkg -l | grep snmp
ii libnet-snmp-pe 5.0.1-1Script SNMP connections
ii libsnmp-base 5.1.2-6.1 NET SNMP (Simple Network Management Protocol
ii
Hi guys,
i need to be able to remotely monitor a bunch of stuff on my network..
for services (http and what not) i'm using nagios, which is going
great. I also need to be able to monitor the disk usage, load, context
switches. on various hosts, so i was thinking snmp would be the best
way to go
, but which one? Where could I find the lists of the
needed options for mrtg/snmp to work?
Thak you! :-)
root-maildpkg -l | grep snmp
ii libnet-snmp-pe 5.0.1-1Script SNMP connections
ii libsnmp-base 5.1.2-6.1 NET SNMP (Simple Network Management Protocol
ii libsnmp-perl 5.1.2
Chavdar Videff wrote:
com2sec readonly 10.50.0.0/25 public
com2sec NAME SOURCE COMMUNITY
This directive specifies the mapping from a
source/community pair to a security name. SOURCE
can be a hostname, a subnet, or the word default.
On Friday 13 May 2005 15:57, Jon Dowland wrote:
Chavdar Videff wrote:
com2sec readonly 10.50.0.0/25 public
com2sec NAME SOURCE COMMUNITY
This directive specifies the mapping from a
source/community pair to a security name. SOURCE
]: H1Our 128K link to the outside world/H1
Target[leased]: 1:[EMAIL PROTECTED]:161
MaxBytes[leased]: 16000
and the /etc/snmp/snmp.conf is this:
com2sec readonly 10.50.0.0/25 public
However nothing happeds.
I included in the mrtg.conf a script that checks the test machine cpu and
memory and I am
Bonjour
J'utilise MRTG pour suivre la consomation cpu de serveurs debian 3.0
Les serveurs sont des bi-pro et je voudrais avoir les infos via snmp de
chaque CPU.
J'utilise la mib UCD-SNMP-MIB pour recuperer les valeurs des compteurs
ssCpuRawUser.0 ssCpuRawSystem.0 et ssCpuRawNice qui cumulés me
Respondendo a mim mesmo, a resposta do andré respondeu tudo Valeu cara!!
Você ativou a linha abaixo no arquivo /etc/snmp/snmpd.conf?
#com2sec paranoid default public
com2sec readonly default public
#com2sec readwrite default private
--
André Carezia
Eng. de
Pessoal, alguem aqui manda um pouquinho de SNMP?
Estou querendo instalar algum programa pra fazer umas estatísticas no meu
gateway, mas todos que eu vejo usam o SNMP como forma de coletar as
informações. O problema é que meu conhecimento de SNMP é zero (bom, não é
beeem zero, mas é
bien presente dans le repertoire /usr/share/snmp/mibs/ par defaut.
Quand je tente un snmpget -m all -Dparse-mibs je vois que le module est
bien chargé, de meme un snmptranslate -Tp me donne bien l'arborescence.
Logique, je devrais pouvoir faire un snmpwalk sur l'oid .1.3.6.1.3 (tout
ce qui est
Witam
Czy komuś udało się wyciągnąć z Windowsa statystyki dot. np.
obciążenia procesora, bądź zajętości dysków przy pomocy mrtg?
Oczywiście na Windowsie chodzi odpalony serwer SNMP
Pozdrawiam
Piotr Szmigielski
'Press any key to continue or any other key to quit'
Reply To: [EMAIL PROTECTED
Am Di, den 14.12.2004 schrieb Piotr Szmigielski um 8:26:
Witam
Czy komuś udało się wyciągnąć z Windowsa statystyki dot. np.
obciążenia procesora, bądź zajętości dysków przy pomocy mrtg?
Oczywiście na Windowsie chodzi odpalony serwer SNMP
Pozdrawiam
Piotr Szmigielski
'Press any key
Am Di, den 14.12.2004 schrieb Piotr Szmigielski um 14:23:
www.snmp-informant.com
Więc może ktoś, z osób administrujących Debianem spotkał się z
podobnym problemem i udało mu się to rozwiązać.. ewentualnie ma
jakieś sugestie
/background
Wejdz na stronke wyzej wspomniana, tam bedzie
Salut,
en installant snmpd sur une machine, j'ai vu qu'il avait comme
dépendance la libsensors. J'ai mes capteurs déjà configurés sur ma
machine (sensors-detect, c'est vraiment magique des fois :) ), mais
malheureusement un snmpwalk ne fait apparaitre aucun relevé de
températue ou de
Cześć
Korzystałem kiedyś ( w woody-m) z ucd-snmp w celu odpalania skryptów w
zależności od trap snmp i wszystko szło ok. W sarge jest już net-snmp
(zamiast ucd-snmp). Niby wielkiej różnicy nie ma, ale to nie działa. W
pliku snmptrapd.conf jest jeden wpis traphandle default /bin/sh
/home
I have the following components on a debian system
hooch:/usr/share/snmp/mibs# dpkg -l | grep snmp
ii libnet-snmp-pe 4.0.3-1Script SNMP connections
ii libsnmp-base 5.1.1-2NET SNMP (Simple Network Management
Protocol
ii libsnmp-perl 5.1.1-2NET SNMP (Simple Network
Jan Johansson said:
I have the following components on a debian system
snip
I have downloaded printer.mib from mibdepot. Renamed the file from
mib-txt, copied it to /usr/share/snmp/mibs, deleted the .index file.
Yet, snmpwalk gives me (among others)
.iso.org.dod.internet.mgmt.mib
what happens if you use -M /usr/share/snmp/mibs or -m
/usr/share/snmp/mibs/printer.txt with snmpwalk? If this works, there
is a
configuration problem and the mibdir is not getting picked up. If it
doesn't, it's likely you have the wrong mib, or netsnmp doesn't
understand
the mib.
Same
what happens if you use -M /usr/share/snmp/mibs or -m
/usr/share/snmp/mibs/printer.txt with snmpwalk? If this works, there
is a
configuration problem and the mibdir is not getting picked up. If it
doesn't, it's likely you have the wrong mib, or netsnmp doesn't
understand
the mib.
Ok, I
Jan Johansson said:
what happens if you use -M /usr/share/snmp/mibs or -m
/usr/share/snmp/mibs/printer.txt with snmpwalk? If this works, there
is a
configuration problem and the mibdir is not getting picked up. If it
doesn't, it's likely you have the wrong mib, or netsnmp doesn't
understand
Hola!
Estoy monitoreando por SNMP algunos dispositivos y estoy con un par de
dudas, lo que tengo claro, es que una descripcion (nomenclatura) hace
referencia a una OID, por ejemplo
#snmpwalk 10.0.0.1 public iso.org.dod.internet.mgmt.mib-2.system.sysUpTime.0
es lo mismo que poner
#snmpwalk
Hola a todos...
Estoy siguiendo dos manuales de snmp y en los dos tengo el mismo problema.
Al realizar la primera prueba despues de la instalacion...
snmpwalk localhost -v1 -c comunity
Me devuelve el error:
Timeout: No Response from localhost
No he tocado el fichero de configuración /etc/snmp
Hola:
Prueba este otro formato:
snmpwalk -v 1 -c public localhost
suerte...
- Original Message -
From: xve [EMAIL PROTECTED]
To: debian-user-spanish@lists.debian.org
Sent: Friday, April 23, 2004 5:04 PM
Subject: error en snmp (woody)
Hola a todos...
Estoy siguiendo dos
Essse
xve dijo:
Hola a todos...
Estoy siguiendo dos manuales de snmp y en los dos tengo el mismo problema.
Al realizar la primera prueba despues de la instalacion...
snmpwalk localhost -v1 -c comunity
si miras el man veras que despues de la v de versión debe ir o 1 o 2c
: xve [EMAIL PROTECTED]
To: debian-user-spanish@lists.debian.org
Sent: Friday, April 23, 2004 5:04 PM
Subject: error en snmp (woody)
Hola a todos...
Estoy siguiendo dos manuales de snmp y en los dos tengo el mismo
problema. Al realizar la primera prueba despues de la instalacion
Hola a todos:
¿Alguien conoce un manual de SNMP para tontos?
Es que llevo verios días intentando entender su funcionamiento y no he
encontrado nada mejor que los man y, sinceramente, no los entiendo.
La información que deseo saber, en principio, es sencillita (o eso creía
yo).
En
El dia Mon, 19 Apr 2004 16:59:49 +0200
Gotzon Astondoa escribio:
Sin embargo, la información que he encontrado, tanto para la
configuración como para la obtención de datos es mínima y ni siquiera
consigo configurarlo de manera acertada.
A ver si te ayuda este artículo, va de mrtg y snmp
Alguien sabe cual es la OID para extraer el porcentaje usado de CPU en un
Linux via SNMP?
Lo unico que encuentro es las OID para ver el idle, user, etc. pero eso no
me vale.
Gracias y un saludo.
: Martinez Gonzalez, Francisco [mailto:[EMAIL PROTECTED]
Enviado el: martes, 06 de abril de 2004 13:32
Para: debian-user-spanish@lists.debian.org
Asunto: [Off-Topic]: CPU por SNMP
Alguien sabe cual es la OID para extraer el porcentaje usado de CPU en un
Linux via SNMP?
Lo unico que encuentro es las
201 - 300 of 416 matches
Mail list logo