Hi Antti,
On 2016-01-06 18:17, Antti Palosaari wrote:
> On 01/05/2016 05:57 PM, Peter Rosin wrote:
>> From: Peter Rosin
>>
>> Hi!
>>
>> I have a pair of boards with this i2c topology:
>>
>> GPIO ---| -- BAT1
>> | v /
>>
Am Donnerstag, den 07.01.2016, 17:02 +0800 schrieb Yakir Yang:
> RK3229 integrate an DesignedWare HDMI2.0 controller and an INNO HDMI2.0 phy,
> the max output resolution is 4K.
>
> Signed-off-by: Yakir Yang
It sounds like the INNO HDMI2.0 phy is not necessarily specific to
Uri Mashiach writes:
> Device tree modifications:
> - Pinmux for SPI0 and WiFi GPIOs.
> - SPI0 node with wlcore as a child node.
>
> Cc: Tony Lindgren
> Signed-off-by: Uri Mashiach
> ---
> v1 -> v2: Replace interrupts
On Mon, Dec 28, 2015 at 8:09 AM, Biao Huang wrote:
> Signed-off-by: Biao Huang
Patch applied with the ACKs.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to
Hi Caesar,
Am Donnerstag, 7. Januar 2016, 16:25:43 schrieb Caesar Wang:
> Hi all,
>
> Happy new year! :)
> Let's go on working for happy.
please make sure to split your patch-series at appropriate points for future
versions to only address relevant people. For example I don't think Ulf
really
Hi Archit,
On Thu, 7 Jan 2016 11:12:47 +0530
Archit Taneja wrote:
>
>
> On 01/06/2016 05:55 PM, Boris Brezillon wrote:
> > Add basic support for the sil902x RGB -> HDMI bridge.
> > This driver does not support audio output yet.
> >
> > Signed-off-by: Boris Brezillon
Hi Philipp,
Thanks for your fast respond :)
On 01/07/2016 06:04 PM, Philipp Zabel wrote:
Am Donnerstag, den 07.01.2016, 17:02 +0800 schrieb Yakir Yang:
RK3229 integrate an DesignedWare HDMI2.0 controller and an INNO HDMI2.0 phy,
the max output resolution is 4K.
Signed-off-by: Yakir Yang
On Thu, Dec 31, 2015 at 12:23 PM, Matthias Brugger
wrote:
> On 28/12/15 08:09, Biao Huang wrote:
>>
>> Add pinctrl and GPIO node to mt2701.dtsi
>>
>> Signed-off-by: Biao Huang
>> Acked-by: Linus Walleij
>> ---
>>
gt;>> From: Rameshwar Prasad Sahu <rs...@apm.com>
>>>
>>> The Arason SD host controller supports set block count command (cmd23)
>>> and high speed mode. This patch re-enable both of these features that
>>> was disabled. For device that doesn't
On Thursday 07 January 2016 12:01:59 Robin Murphy wrote:
> The DMA-330 has an "irq_abort" interrupt line on which it signals faults
> separately from the "irq[n:0]" channel interrupts. On Juno, this is
> wired up to SPI 92; add it to the DT so that DMAC faults are correctly
> reported for the
On Tuesday 05 January 2016 17:26:06 Jon Mason wrote:
> On Fri, Dec 18, 2015 at 10:44:28PM +0100, Arnd Bergmann wrote:
> > On Friday 18 December 2015 16:37:56 Jon Mason wrote:
> > > + cru: cru@1800c184 {
> > > + compatible = "syscon";
> > > + reg = <0x1800c184
Hi,
Sorry for the slow reply, holidays and vacation and all that.
On Wed, Dec 23, 2015 at 07:44:32PM +0900, Krzysztof Kozlowski wrote:
> W dniu 22.12.2015 o 13:46, Olof Johansson pisze:
> > On Wed, Dec 02, 2015 at 10:39:40AM +0900, Krzysztof Kozlowski wrote:
> >> Hi Kukjin,
> >>
> >> Dependency
On Wed, Dec 23, 2015 at 07:55:11PM +0900, Krzysztof Kozlowski wrote:
> W dniu 22.12.2015 o 13:51, Olof Johansson pisze:
> > On Wed, Dec 02, 2015 at 10:39:43AM +0900, Krzysztof Kozlowski wrote:
> >> Hi Kukjin,
> >>
> >> This is also clock dependency. I put it in separate tag in case clock
> >>
On Thursday 07 January 2016 13:19:44 Jon Hunter wrote:
>
> Adding Arnd.
>
> Hmmm ... well apparently stdout-path does not work for tegra and in
> order to make this work I had to do the following ...
>
>
> [PATCH] serial: 8250: of: Add earlycon support for Tegra
>
> Currently, early console
Mark Brown writes:
> On Tue, Jan 05, 2016 at 09:50:54PM +, Måns Rullgård wrote:
>> Cyrille Pitchen writes:
>
>> > + as->use_cs_gpios = true;
>> > + if (atmel_spi_is_v2(as) &&
>> > + !of_get_property(pdev->dev.of_node, "cs-gpios", NULL))
Hi Yakir,
Am Donnerstag, den 07.01.2016, 18:15 +0800 schrieb Yakir Yang:
> Hi Philipp,
>
> Thanks for your fast respond :)
>
> On 01/07/2016 06:04 PM, Philipp Zabel wrote:
> > Am Donnerstag, den 07.01.2016, 17:02 +0800 schrieb Yakir Yang:
> >> RK3229 integrate an DesignedWare HDMI2.0 controller
On Thu, Jan 7, 2016 at 10:53 AM, Jon Hunter wrote:
>
> On 07/01/16 14:11, Arnd Bergmann wrote:
>> On Thursday 07 January 2016 13:19:44 Jon Hunter wrote:
[...]
> Ok so something like this ...
>
> diff --git a/drivers/tty/serial/8250/8250_early.c
>
On Wed, 6 Jan 2016, Vinod Koul wrote:
> On Wed, Jan 06, 2016 at 02:51:07PM +0530, Rameshwar Sahu wrote:
> > >> @@ -1610,6 +1611,7 @@ static int xgene_dma_request_irqs(struct xgene_dma
> > >> *pdma)
> > >> /* Register DMA channel rx irq */
> > >> for (i = 0; i < XGENE_DMA_MAX_CHANNEL;
On Wed, Jan 06, 2016 at 02:51:07PM +0530, Rameshwar Sahu wrote:
> Hi Vinod,
>
> On Wed, Jan 6, 2016 at 2:43 PM, Vinod Koul wrote:
> > On Wed, Dec 23, 2015 at 06:28:15PM +0530, Rameshswar Prasad Sahu wrote:
> >> From: Rameshwar Prasad Sahu
> >>
> >> For
Hi Petr
On Wed, 2016-01-06 at 09:03 +0100, Petr Štetiar wrote:
> Marcel Ziswiler [2016-01-05 17:39:01]:
>
> Hi Marcel,
>
> thanks for taking care of this, I'm quite busy with other tasks :(
You're welcome. I know that feeling.
> > - integrated review feedback
Hi Javier,
Thankk you for the patch.
On Monday 04 January 2016 09:25:31 Javier Martinez Canillas wrote:
> After power-up, the tvp5150 decoder is in a unknown state until the
> RESETB pin is driven LOW which reset all the registers and restarts
> the chip's internal state machine.
>
> The init
Hello Laurent,
On 01/06/2016 07:59 AM, Laurent Pinchart wrote:
> Hi Javier,
>
> Thankk you for the patch.
>
Thanks a lot for your feedback.
> On Monday 04 January 2016 09:25:31 Javier Martinez Canillas wrote:
>> After power-up, the tvp5150 decoder is in a unknown state until the
>> RESETB pin
On Wednesday 06 January 2016 07:46:35 Javier Martinez Canillas wrote:
> On 01/06/2016 07:39 AM, Laurent Pinchart wrote:
> > Hi Javier,
> >
> > Thank you for the patch.
>
> Thanks a lot for your feedback.
>
> [snip]
>
> >> +
> >> +Optional Properties:
> >> +- powerdown-gpios: phandle for the
On Wed, Jan 06, 2016 at 12:19:56AM +0800, kbuild test robot wrote:
> Hi Charles,
>
> [auto build test WARNING on clk/clk-next]
> [also build test WARNING on v4.4-rc8 next-20160105]
> [if your patch is applied to the wrong git tree, please drop us a note to
> help improving the system]
>
> url:
Hi Javier,
Thank you for the patch.
On Monday 04 January 2016 09:25:32 Javier Martinez Canillas wrote:
> The video decoder supports either 8-bit 4:2:2 YUV with discrete syncs
> or 8-bit ITU-R BT.656 with embedded syncs output format but currently
> BT.656 it's always reported. Allow to configure
Hello Laurent,
Thanks a lot for your feedback.
On 01/06/2016 07:56 AM, Laurent Pinchart wrote:
> Hi Javier,
>
> Thank you for the patch.
>
> On Monday 04 January 2016 09:25:32 Javier Martinez Canillas wrote:
>> The video decoder supports either 8-bit 4:2:2 YUV with discrete syncs
>> or 8-bit
On 2016年01月06日 12:03, Chris Zhong wrote:
The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM driver.
The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel
On Wed, Dec 23, 2015 at 06:28:15PM +0530, Rameshswar Prasad Sahu wrote:
> From: Rameshwar Prasad Sahu
>
> For interrupt controller that doesn't support irq_disable and hardware
> with level interrupt, an extra interrupt can be pending. This patch fixes
> the issue by setting
On Wed, Jan 6, 2016 at 3:01 PM, Vinod Koul wrote:
> On Wed, Jan 06, 2016 at 02:51:07PM +0530, Rameshwar Sahu wrote:
>> Hi Vinod,
>>
>> On Wed, Jan 6, 2016 at 2:43 PM, Vinod Koul wrote:
>> > On Wed, Dec 23, 2015 at 06:28:15PM +0530, Rameshswar Prasad
On Wed, 6 Jan 2016, Suman Tripathi wrote:
> On Wed, Jan 6, 2016 at 3:35 PM, Thomas Gleixner wrote:
> > Why would I? Those helpers are core internal and not usable in random
> > drivers.
> >
>
> i think the problem is the name of the function. It should be something
>
>
On Wed, Jan 6, 2016 at 3:40 PM, Suman Tripathi wrote:
>
>
> On Wed, Jan 6, 2016 at 3:35 PM, Thomas Gleixner wrote:
>>
>> On Wed, 6 Jan 2016, Vinod Koul wrote:
>> > On Wed, Jan 06, 2016 at 02:51:07PM +0530, Rameshwar Sahu wrote:
>> > > >> @@ -1610,6 +1611,7
Hello Laurent,
On 01/06/2016 07:39 AM, Laurent Pinchart wrote:
> Hi Javier,
>
> Thank you for the patch.
>
Thanks a lot for your feedback.
[snip]
>> +
>> +Optional Properties:
>> +- powerdown-gpios: phandle for the GPIO connected to the PDN pin, if any.
>
> The signal is called PDN in the
On Mon, Jan 04, 2016 at 08:22:33PM +0200, Andy Shevchenko wrote:
> On Sat, Jan 2, 2016 at 11:21 PM, Wolfram Sang wrote:
> > On Sun, Dec 27, 2015 at 04:57:48PM +0200, Andy Shevchenko wrote:
> >> On Wed, Dec 23, 2015 at 9:18 PM, Akshay Bhat
> >> wrote:
Hi Vinod,
On Wed, Jan 6, 2016 at 2:43 PM, Vinod Koul wrote:
> On Wed, Dec 23, 2015 at 06:28:15PM +0530, Rameshswar Prasad Sahu wrote:
>> From: Rameshwar Prasad Sahu
>>
>> For interrupt controller that doesn't support irq_disable and hardware
>> with level
Hi,
On Wed, Jan 06, 2016 at 09:40:22AM +, Jon Hunter wrote:
> Add initial device-tree support for Google Pixel C (a.k.a. Smaug) based
> upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
>
> Signed-off-by: Jon Hunter
> ---
> arch/arm64/boot/dts/nvidia/Makefile | 1
Hi Javier,
Thank you for the patch.
On Monday 04 January 2016 09:25:30 Javier Martinez Canillas wrote:
> From: Eduard Gavin
>
> The Documentation/devicetree/bindings/media/i2c/tvp5150.txt DT binding doc
> lists "ti,tvp5150" as the device compatible string but the driver does
Hi Javier,
Thank you for the patch.
On Monday 04 January 2016 09:25:29 Javier Martinez Canillas wrote:
> Add a Device Tree binding document for the TVP5150 video decoder.
>
> Signed-off-by: Javier Martinez Canillas
> ---
>
>
Hi Boris,
[auto build test WARNING on drm/drm-next]
[also build test WARNING on v4.4-rc8 next-20160106]
[if your patch is applied to the wrong git tree, please drop us a note to help
improving the system]
url:
Hi Heiko,
On 2016年01月02日 10:34, Xing Zheng wrote:
> Hi Heiko,
> Thank you for your patch, I will apply and test it later.
>
> Thanks.
>
>> 在 2016年1月2日,06:10,Heiko Stübner 写道:
>>
>> Hi Xing,
>>
>> Am Dienstag, 29. Dezember 2015, 10:34:09 schrieb Xing Zheng:
>>> On 2015年12月29日
On Wed, Jan 06, 2016 at 05:49:22PM +0530, Laxman Dewangan wrote:
> On Wednesday 06 January 2016 05:48 PM, Mark Brown wrote:
> >* PGP Signed by an unknown key
> >On Wed, Jan 06, 2016 at 11:45:22AM +0530, Laxman Dewangan wrote:
> >> Enhanced transient response (ETR) will affect the configuration
On Wed, Jan 06, 2016 at 12:25:51PM +0100, Boris Brezillon wrote:
> Add Sil9022 DT bindings description.
>
> Signed-off-by: Boris Brezillon
> ---
> .../devicetree/bindings/display/bridge/sil902x.txt | 31
> ++
> 1 file changed, 31
On Wed, Jan 06, 2016 at 04:29:08PM +0530, Kishon Vijay Abraham I wrote:
> DRA72 uses USB3 PHY for the 2nd lane of PCIE. The configuration
> required to make USB3 PHY used for the 2nd lane of PCIe is done
> here.
>
> Signed-off-by: Kishon Vijay Abraham I
> ---
>
Hi Javier,
On Wednesday 06 January 2016 08:27:26 Javier Martinez Canillas wrote:
> On 01/06/2016 07:56 AM, Laurent Pinchart wrote:
> > On Monday 04 January 2016 09:25:32 Javier Martinez Canillas wrote:
> >> The video decoder supports either 8-bit 4:2:2 YUV with discrete syncs
> >> or 8-bit ITU-R
Hi Boris,
On Wed, Jan 06, 2016 at 12:25:50PM +0100, Boris Brezillon wrote:
> Add basic support for the sil902x RGB -> HDMI bridge.
> This driver does not support audio output yet.
>
> Signed-off-by: Boris Brezillon
> ---
> Hello,
>
> This patch is only
On Wednesday 06 January 2016 05:48 PM, Mark Brown wrote:
* PGP Signed by an unknown key
On Wed, Jan 06, 2016 at 11:45:22AM +0530, Laxman Dewangan wrote:
Enhanced transient response (ETR) will affect the configuration of CKADV.
+-maxim,junction-temp-warning: Junction temp warning on which
Hi Rob,
On Wed, 6 Jan 2016 07:19:59 -0600
Rob Herring wrote:
> On Wed, Jan 06, 2016 at 12:25:51PM +0100, Boris Brezillon wrote:
> > Add Sil9022 DT bindings description.
> >
> > Signed-off-by: Boris Brezillon
> > ---
> >
Hi,
> + chosen {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + };
What is the ranges property doing here?
[...]
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
>
Happy new year !!
Any comments on this patchset ?
On Thu, Dec 24, 2015 at 1:01 PM, Suman Tripathi wrote:
> This patch set implements a workaround for an errate in the APM
> X-Gene SATA host controller with edge interrupt. The HOST_IRQ_STAT
> misses the edge interrupt from
On Wed, Jan 06, 2016 at 04:19:53PM +0530, Kishon Vijay Abraham I wrote:
> Perform syscon configurations to get x2 mode to working in DRA74x and
> DRA72x. Also add a new compatible string to dfferentiate
> DRA72x and DRA74x, since b1c0 mask is different for both these platforms.
>
> Signed-off-by:
On Wednesday 06 January 2016 07:55 PM, Rob Herring wrote:
On Wed, Jan 06, 2016 at 12:37:35PM +, Mark Brown wrote:
On Wed, Jan 06, 2016 at 05:49:22PM +0530, Laxman Dewangan wrote:
On Wednesday 06 January 2016 05:48 PM, Mark Brown wrote:
* PGP Signed by an unknown key
On Wed, Jan 06, 2016
Hi Wolfram,
On Wed, Jan 6, 2016 at 2:51 PM, Wolfram Sang <w...@the-dreams.de> wrote:
> These bindings allow an I2C bus to switch between multiple masters. This
> is not hot-swichting because connected I2C slaves will be
> re-instantiated. It is meant to select the best I2C core
在 2016/1/5 20:19, Arnd Bergmann 写道:
On Tuesday 05 January 2016 19:59:49 Rongrong Zou wrote:
在 2016/1/5 0:34, Arnd Bergmann 写道:
On Tuesday 05 January 2016 00:04:19 Rongrong Zou wrote:
在 2016/1/4 19:13, Arnd Bergmann 写道:
On Sunday 03 January 2016 20:24:14 Rongrong Zou wrote:
在 2015/12/31
Hi Mark,
On Wed, Jan 06, 2016 at 01:25:05PM +, Mark Rutland wrote:
> > + clocks {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + osc24M: osc24M_clk {
> > + #clock-cells = <0>;
> > +
Hi Wolfram,
On Wed, Jan 6, 2016 at 2:51 PM, Wolfram Sang <w...@the-dreams.de> wrote:
> From: Wolfram Sang <wsa+rene...@sang-engineering.com>
>
> This driver allows an I2C bus to switch between multiple masters. This
> is not hot-swichting because connected I2C slaves
On Wed, Jan 06, 2016 at 12:37:35PM +, Mark Brown wrote:
> On Wed, Jan 06, 2016 at 05:49:22PM +0530, Laxman Dewangan wrote:
> > On Wednesday 06 January 2016 05:48 PM, Mark Brown wrote:
> > >* PGP Signed by an unknown key
>
> > >On Wed, Jan 06, 2016 at 11:45:22AM +0530, Laxman Dewangan wrote:
>
On Wed, Jan 06, 2016 at 11:45:22AM +0530, Laxman Dewangan wrote:
> Enhanced transient response (ETR) will affect the configuration of CKADV.
> +-maxim,junction-temp-warning: Junction temp warning on which device generates
> + warning interrupts.
This needs to specify what the values
Hi Wolfram and Peter,
I will give my opinion about the path chosen although it should be
taken lightly.
I can see that hardware guys missed the software guys again on the
development path, but since this happens more often than not, I would
say it seems OK to have support for this as long as it
Hi Sascha,
On Wed, 6 Jan 2016 14:47:36 +0100
Sascha Hauer wrote:
> Hi Boris,
>
> On Wed, Jan 06, 2016 at 12:25:50PM +0100, Boris Brezillon wrote:
> > Add basic support for the sil902x RGB -> HDMI bridge.
> > This driver does not support audio output yet.
> >
> >
Hi Wolfram,
On Wed, Jan 6, 2016 at 2:51 PM, Wolfram Sang wrote:
> From: Wolfram Sang
>
> If we want to use OF_DYNAMIC features outside the of framework, we need
> to access this lock.
As I2C_DEMUX_PINCTRL is tristate, you want to add an
Hi Boris,
[auto build test ERROR on drm/drm-next]
[also build test ERROR on v4.4-rc8 next-20160106]
[if your patch is applied to the wrong git tree, please drop us a note to help
improving the system]
url:
On 06/01/16 09:46, Mark Rutland wrote:
> Hi,
>
> On Wed, Jan 06, 2016 at 09:40:22AM +, Jon Hunter wrote:
>> Add initial device-tree support for Google Pixel C (a.k.a. Smaug) based
>> upon Tegra210 SoC with 3 GiB of LPDDR4 RAM.
>>
>> Signed-off-by: Jon Hunter
>> ---
>>
On Wed, Jan 06, 2016 at 12:34:32PM +, Charles Keepax wrote:
> Specify the device tree binding for the input clocks to Arizona devices.
>
> Signed-off-by: Charles Keepax
> ---
>
> No changes since v1.
>
> Thanks,
> Charles
>
>
On Wednesday 06 January 2016 06:07 PM, Mark Brown wrote:
* PGP Signed by an unknown key
In one of design, interrupt from MAX77620, and alert from both MAX77621
shorted and going to Arm GIC controller. On this case, I need to register
the interrupt as SHARED interrupt. This property can not
On Tue, Jan 05, 2016 at 02:39:18PM +0100, Neil Armstrong wrote:
> Add NP4 macb SoC variant.
>
> Signed-off-by: Neil Armstrong
> ---
> Documentation/devicetree/bindings/net/macb.txt | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Rob Herring
--
To
On Tue, Jan 05, 2016 at 10:55:01AM +0530, Archit Taneja wrote:
> Add DT bindings document for the Qualcomm NAND controller driver.
>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring
> Signed-off-by: Archit Taneja
> ---
> v5:
> - Make changes to
On Tue, Jan 05, 2016 at 01:59:14PM +0100, Oreste Salerno wrote:
> Add support for retrieving the platform data from the device
> tree.
Converting platform data to DT as is is typically not the right thing to
do. There's some overlap, but it is not typically 1-1.
> Signed-off-by: Oreste Salerno
On 01/06/2016 02:13 AM, Laxman Dewangan wrote:
>
> On Wednesday 06 January 2016 01:12 PM, H. Nikolaus Schaller wrote:
>> Hi,
>>
>> Am 06.01.2016 um 00:40 schrieb Nishanth Menon :
>>
>>> On 01/05/2016 06:01 AM, H. Nikolaus Schaller wrote:
+rtc {
+
On Wed, Jan 6, 2016 at 10:26 AM, Sascha Hauer wrote:
> On Wed, Jan 06, 2016 at 02:53:30PM +0100, Boris Brezillon wrote:
>> Hi Sascha,
>>
>> On Wed, 6 Jan 2016 14:47:36 +0100
>> Sascha Hauer wrote:
>>
>> > Hi Boris,
>> >
>> > On Wed, Jan 06, 2016 at
On Tue, Jan 05, 2016 at 04:57:18PM +0100, Peter Rosin wrote:
> From: Peter Rosin
>
> With a i2c topology like the following
>
>GPIO ---| -- BAT1
> | v /
>I2C -+--+ MUX
> |
Hello Laurent,
On 01/06/2016 10:48 AM, Laurent Pinchart wrote:
[snip]
@@ -940,6 +948,16 @@ static int tvp5150_cropcap(struct v4l2_subdev *sd,
struct v4l2_cropcap *a)
static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config
On Tue, Jan 05, 2016 at 02:30:18PM +0800, James Liao wrote:
> This patch adds the binding documentation for apmixedsys, bdpsys,
> ethsys, hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and
> vdecsys for Mediatek MT2701.
>
> Signed-off-by: James Liao
[...]
> diff
Hi Archit,
On Tue, 5 Jan 2016 10:55:01 +0530
Archit Taneja wrote:
> Add DT bindings document for the Qualcomm NAND controller driver.
>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring
> Signed-off-by: Archit Taneja
> ---
>
On Wed, Jan 06, 2016 at 02:53:30PM +0100, Boris Brezillon wrote:
> Hi Sascha,
>
> On Wed, 6 Jan 2016 14:47:36 +0100
> Sascha Hauer wrote:
>
> > Hi Boris,
> >
> > On Wed, Jan 06, 2016 at 12:25:50PM +0100, Boris Brezillon wrote:
> > > Add basic support for the sil902x RGB
On Wed, 6 Jan 2016 09:14:44 -0600
Rob Herring wrote:
> On Tue, Jan 05, 2016 at 10:55:01AM +0530, Archit Taneja wrote:
> > Add DT bindings document for the Qualcomm NAND controller driver.
> >
> > Cc: devicetree@vger.kernel.org
> > Cc: Rob Herring
> >
[+cc Jisheng]
On Fri, Dec 18, 2015 at 02:38:55PM +0200, Stanimir Varbanov wrote:
> There is no guarantees that enabling ATU will hit the hardware
> immediately, and subsequent accesses to configuration / IO spaces
> are reliable. So fixing this by read back PCIE_ATU_CR2 register
> just after
On Wed, Jan 6, 2016 at 8:36 AM, Nishanth Menon wrote:
> On 01/06/2016 02:13 AM, Laxman Dewangan wrote:
>>
>> On Wednesday 06 January 2016 01:12 PM, H. Nikolaus Schaller wrote:
>>> Hi,
>>>
>>> Am 06.01.2016 um 00:40 schrieb Nishanth Menon :
>>>
On 01/05/2016 06:01
On Wed, 6 Jan 2016 10:13:57 -0600
Rob Herring wrote:
> On Wed, Jan 6, 2016 at 9:37 AM, Boris Brezillon
> wrote:
> > On Wed, 6 Jan 2016 09:14:44 -0600
> > Rob Herring wrote:
> >
> >> On Tue, Jan 05, 2016 at 10:55:01AM +0530,
Hi,
* H. Nikolaus Schaller [160106 00:12]:
> Am 06.01.2016 um 02:00 schrieb Tony Lindgren :
> >
> > Also I'm not seeing just zeroes coming from RTC after typing hwclock
> > on omap5-uevm. It's working on x15 though.
> >
> > Nikolaus, is hwclock command
Hi Tony,
Am 06.01.2016 um 17:41 schrieb Tony Lindgren :
> Hi,
>
> * H. Nikolaus Schaller [160106 00:12]:
>> Am 06.01.2016 um 02:00 schrieb Tony Lindgren :
>>>
>>> Also I'm not seeing just zeroes coming from RTC after typing hwclock
>>>
On Wed, Jan 6, 2016 at 7:51 AM, Wolfram Sang <w...@the-dreams.de> wrote:
> From: Wolfram Sang <wsa+rene...@sang-engineering.com>
>
> This driver allows an I2C bus to switch between multiple masters. This
> is not hot-swichting because connected I2C slaves will be
> r
* H. Nikolaus Schaller [160106 08:48]:
> Hi Tony,
>
> Am 06.01.2016 um 17:41 schrieb Tony Lindgren :
>
> > Hi,
> >
> > * H. Nikolaus Schaller [160106 00:12]:
> >> Am 06.01.2016 um 02:00 schrieb Tony Lindgren :
> >>>
On Wed, Jan 6, 2016 at 9:37 AM, Boris Brezillon
wrote:
> On Wed, 6 Jan 2016 09:14:44 -0600
> Rob Herring wrote:
>
>> On Tue, Jan 05, 2016 at 10:55:01AM +0530, Archit Taneja wrote:
>> > Add DT bindings document for the Qualcomm NAND controller
On 01/05/2016 05:57 PM, Peter Rosin wrote:
From: Peter Rosin
Hi!
I have a pair of boards with this i2c topology:
GPIO ---| -- BAT1
| v /
I2C -+--B---+ MUX
| \
On Wed, Jan 06, 2016 at 08:25:21AM -0600, Rob Herring wrote:
> On Wed, Jan 06, 2016 at 12:37:35PM +, Mark Brown wrote:
> > > I tried to roundoff to the next higher threshold when supported value (120
> > > or 140 degC) is not provided in driver. But it is fine to me to specify
> > > the
> >
Marcel Ziswiler [2016-01-05 17:39:01]:
Hi Marcel,
thanks for taking care of this, I'm quite busy with other tasks :(
> - integrated review feedback from Lucas
You've probably missed few of them :) See my nitpicks bellow.
> - left and even added some more comments
Hi Tony,
Am 06.01.2016 um 02:00 schrieb Tony Lindgren :
> * Nishanth Menon [160105 15:40]:
>> On 01/05/2016 06:01 AM, H. Nikolaus Schaller wrote:
>>> tested on OMP5432 EVM
>>>
>>> Signed-off-by: H. Nikolaus Schaller
>>> ---
>>>
On Wednesday 06 January 2016 01:12 PM, H. Nikolaus Schaller wrote:
Hi,
Am 06.01.2016 um 00:40 schrieb Nishanth Menon :
On 01/05/2016 06:01 AM, H. Nikolaus Schaller wrote:
+ rtc {
+ compatible = "ti,palmas-rtc";
+
On Mon, Jan 4, 2016 at 6:13 AM, Wolfram Sang wrote:
> From: Grant Likely
>
> Add a single resource to the test bus device to exercise the platform
> bus code a little more. This isn't strictly a devicetree test, but it is
> a corner case that the
On Tue, Dec 15, 2015 at 10:55:59AM +0100, Geert Uytterhoeven wrote:
> Fix bogus indentation of the PSCI compatible values, reformat.
>
> Signed-off-by: Geert Uytterhoeven
> Acked-by: Lorenzo Pieralisi
Applied, thanks.
Rob
> ---
> v2:
> -
On Sat, Dec 26, 2015 at 12:37:16AM +0100, Pali Rohár wrote:
> Property names do not match real names needed by driver itself.
> This patch fix this problem.
>
> Signed-off-by: Pali Rohár
Applied, thanks.
Rob
> ---
> .../devicetree/bindings/media/i2c/adp1653.txt |
On Sun, Dec 20, 2015 at 01:43:58PM +0300, Sergei Ianovich wrote:
> On Sat, 2015-12-19 at 21:38 -0600, Rob Herring wrote:
> > On Tue, Dec 15, 2015 at 09:58:53PM +0300, Sergei Ianovich wrote:
> > > +Required properties:
> > > +- compatible : should be "icpdas,sram-lp8x4x"
> >
> > No wildcards
Hi Geert-san,
Thank you for your comment and sorry for the delayed response.
> From: Geert Uytterhoeven
> Sent: Monday, January 04, 2016 9:42 PM
>
> On Fri, Dec 25, 2015 at 12:52 PM, Yoshihiro Shimoda
> wrote:
> > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
On Mon, Jan 04, 2016 at 12:34:42PM +, Harvey Hunt wrote:
> From: Alex Smith
>
> Add DT bindings for NAND devices connected to the NEMC on JZ4780 SoCs,
> as well as the hardware BCH controller, used by the jz4780_{nand,bch}
> drivers.
>
> Signed-off-by: Alex Smith
Hi,
On Wednesday 06 January 2016 07:43 PM, Rob Herring wrote:
> On Wed, Jan 06, 2016 at 04:19:53PM +0530, Kishon Vijay Abraham I wrote:
>> Perform syscon configurations to get x2 mode to working in DRA74x and
>> DRA72x. Also add a new compatible string to dfferentiate
>> DRA72x and DRA74x, since
On Wed, Dec 23, 2015 at 06:28:15PM +0530, Rameshswar Prasad Sahu wrote:
> From: Rameshwar Prasad Sahu
>
> For interrupt controller that doesn't support irq_disable and hardware
> with level interrupt, an extra interrupt can be pending. This patch fixes
> the issue by setting
On Mon, Jan 04, 2016 at 12:34:44PM +, Harvey Hunt wrote:
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts
> b/arch/mips/boot/dts/ingenic/ci20.dts
> index 9fcb9e7..782258c 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
As I noted on patch 1,
On 11/23/15 16:47, Stephen Boyd wrote:
> On 11/22, Rob Herring wrote:
>>
>> Much more reasonable now. I do find the '/' in it a bit strange though.
> I can remove the backslash if you like. Is a dash more preferred?
>
>> Acked-by: Rob Herring
>>
> and if so can I keep the ack?
Hi Rob,
Thanks for the comments.
On 1/4/2016 1:29 PM, Rob Herring wrote:
> On Thu, Dec 31, 2015 at 3:12 AM, Frank Rowand wrote:
>> From: Frank Rowand
>>
>> Create script to diff device trees.
>>
>> The device tree can be in any of the forms
command (cmd23)
>> and high speed mode. This patch re-enable both of these features that
>> was disabled. For device that doesn't support high speed, it should
>> configure its capability register accordingly instead disables it
>> explicitly.
>>
>> Signed-off-
On Wed, Jan 06, 2016 at 11:05:02AM +0100, Thomas Gleixner wrote:
> On Wed, 6 Jan 2016, Vinod Koul wrote:
> > On Wed, Jan 06, 2016 at 02:51:07PM +0530, Rameshwar Sahu wrote:
> > > >> @@ -1610,6 +1611,7 @@ static int xgene_dma_request_irqs(struct
> > > >> xgene_dma *pdma)
> > > >> /* Register
1 - 100 of 55459 matches
Mail list logo