: [e-smith-devinfo] E-Smith/Mitel Jabber Server Howto
Good preliminary HOWTO, Thanks.
I set this up on a 4.1.2 box with a couple of minor problems. The
first being that the startup in iniit.d (actually a symlink) will cause
problems as it starts with " jabberd -h 'hostname' so no
Good preliminary HOWTO, Thanks.
I set this up on a 4.1.2 box with a couple of minor problems. The
first being that the startup in iniit.d (actually a symlink) will cause
problems as it starts with " jabberd -h 'hostname' so no matter what
you configure in the jabber.xml file it will only be cont
Not yet, I have been working. I will continue with this later tonight. I am
also going to try in server-gateway mode to put Darrell May's info. to test.
Thanks
Steve
At 02:13 PM 1/21/2002, you wrote:
>Steve,
> Any luck getting things going?
>
>Regards,
> Noah
>
>Quoting "Steven D. Lewis" <[E
"Steven D. Lewis" <[EMAIL PROTECTED]> said:
> My question is, have you tested this on a SME configured as a SERVER
ONLY?
I have not looked into jabber yet but in server-only mode, masq is
disabled. This may be why it is not working.
Regards,
--
Darrell May
DMC Netsourced.com
http://netsourc
er to server
Regards,
Noah
-Original Message-
From: Steven D. Lewis [mailto:[EMAIL PROTECTED]]
Sent: January 21, 2002 2:12 AM
To: Noah Genner
Cc: [EMAIL PROTECTED]
Subject: Re: [e-smith-devinfo] E-Smith/Mitel Jabber Server Howto
Thanks Noah,
I installed this ,per your How-To, on
Tim,
I am checking those now.
Steve
At 08:15 AM 1/21/2002, you wrote:
>you might also make sure that opt/jabber/spool and
>/opt/jabber/spool/{yourhostname} is writeable by the user you are running
>jabber as, since jabber will need to create a file in there for every new
>account.
>
>Steven
Thanks Noah,
I installed this ,per your How-To, on a SME configured as SERVER ONLY for
testing and playing. I had also set up a Red Hat 7.1 box with the
Jabber.com distro of Jabber server. Very easy by the way.
I have not been able to create Jabber account on the SME. This is for
playing so n
Thanks Noah,
I actually was about to do just this. I had installed the Jabber.com distro
onto a Red Hat 7.1 server as an internal test Jabber.
After that I set up a SME as SERVER ONLY to test this RPM. My client fails
to logon.
I can figure this out, only wanted to ask if you had done this on
Hello,
I've just finished my first draft of a Jabber Server Howto. It can be
found at:
http://www.genner.on.ca/noahville/mitel/jabber-howto.htm
This is a first draft and I wouldn't recommend it for production
servers. There isn't all that much "original" here, but I have collected
info
