Re: [digitalradio] Re: another "can you ID this mode" request

HF Packet is also sensitive about the baud rate, 300 baud Packet won't decode if you are set up for 1200 or 9600 baud. Note that no difficulty was experienced in decoding from the recording at the proper aud rate, despite some obvious signal fading. >From my QSO at the southern tip of Texas, I

[digitalradio] Hook up TNC and Soundcard to same radio?

Given: TS-480HX Signalink USB Timewave PK232 USB, etc Thinkpad T-41 Doze XP Pro how do I hook this up so that I can run Olivia/MT63 or whatever at the same time this thing is trying to go Peer to Peer and is being driven freqency wise by Automatic freq control software? I suppose that the AFC wi

RE: [digitalradio] Hook up TNC and Soundcard to same radio?

With the capability to cut and paste a received message from MT-63 and send it out via Winlink, the 10 second turn around is very close to simultaneous operation. If you want to make things difficult for your self, or discourage others from using the available transport layers, you can advocate h

Re: [digitalradio] Re: another "can you ID this mode" request

Charles, I think HF packet is a useful mode, but I can tell you that it does fall short in terms of sensitivity compared to many others. More importantly, path simulations and on-air testing show that it doesn't take much in the way of HF channel distortion to cause throughput issues with 300

Re: [digitalradio] Re: another "can you ID this mode" request

- Original Message - From: Tony To: digitalradio@yahoogroups.com Sent: Tuesday, June 09, 2009 6:56 PM Subject: Re: [digitalradio] Re: another "can you ID this mode" request Howdy, Tony! There are two advantages that HF Packet has over other modes, one being that it oper

Re: [digitalradio] Re: another "can you ID this mode" request

Hi Charles, The latest version of MultiPSK has AX25 using PSK 250 (or PSK 63) modulation. I would be interested to see whether PSK 250 is any better or worse than FSK 300. 73 Sholto K7TMG Charles Brabham wrote: > > > > > > - Original Message - > *From:* Tony