graham787 wrote:
Up to 1-9-1 but dont see sound card select ? is there a way yet ?
No, not yet. You still have to set the sound card that you want to use
as the Windows default sound card.
Jose, the program owner and developer, has said that he intends to add
the option to select the
UKSMG AFRICA#22 WAC
(Satellite)
Website : www.zs2ez.co.za http://www.zs2ez.co.za/
_
From: digitalradio@yahoogroups.com [mailto:digitalra...@yahoogroups.com] On
Behalf Of nietorosdj
Sent: 19 February 2010 02:50 PM
To: digitalradio@yahoogroups.com
Subject: [digitalradio] Re: A new Mode
From: Russell Blair russell_blai...@yahoo.com
To: digitalradio@yahoogroups.com
Sent: Fri, 19 February, 2010 10:50:37
Subject: Re: [digitalradio] Re: A new Mode !
OK got it working now but all is dead on 20m.
Russell NC5O
1- Whoever said nothing is impossible never tried
February, 2010 10:50:37
*Subject:* Re: [digitalradio] Re: A new Mode !
OK got it working now but all is dead on 20m.
Russell NC5O
1- Whoever said nothing is impossible never tried slamming a revolving
door!
2- A government big enough to give you everything you want, is strong
enough
David Boniface wrote:
I have installed the program after using WinRAR to open the archive. However,
when trying to run the program I get this error message
Run-time error '53':
File not found:
Switch(16638-29712).ocx
I got the Runtime error until I extracted the files to their own folder
nietorosdj wrote:
Hi, tomorrow i will change PTT from COM1 to COM6, but i dont know if it'll
run.
Does any one know if it is possible to make the soundcard selectable and
increase the options for the COM port?
I use a US Interface Navigator, and computer control is on COM3 with PTT
on
very sensitive with the same rx vol as say mixW. Is -13db ok or should it
be higher.
Regards
Toby
---Original Message---
From: Dave Ackrill
Date: 19/02/2010 08:27:25
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] Re: A new Mode !
nietorosdj wrote:
Hi, tomorrow
Some minutes before I had a QSO in ROS mode on 14080 with Dan, YO4CVV...
Giedrius, LY2CG
Giedrius, LY2CG wrote:
Some minutes before I had a QSO in ROS mode on 14080 with Dan, YO4CVV...
Giedrius, LY2CG
I'm listening at the moment but there's a loud RTTY signal just above
14.080MHz.
Until I find my old home made opto coupler/audio isolator, I wont be
able to transmit as I cant set
Dave, I am am working without COM, using DIGI VOX in my FT-897...
Hope to meet you soon on this mode!...
73 - Giedrius
nietorosdj wrote:
Hi,
With the New Version 1.6.2 you can select from COM1 to COM6.
For the future versions, i will make soundcard selectable, no problem.
Thank you all for testing ROS. I hear your suggestions.
Thank you for that update, will save me going through my junk box
looking
Hi Dave,
He was talking to WB2LMV, I got the ...deWB2LMV TU Dr Vincente mucholeuste
and then it went downhill rapidly.
73 Sean
---Original Message---
From: Dave Ackrill
Date: 19/02/2010 13:19:16
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] Re: A new Mode
Just got back in and found the following lines on the screen...
RX: 13:41 UTC -46.9 Hz. iQ CQ CQ de YO4Ctp³;O4CVV YO4CVV pse k STOP
RX: 13:50 UTC -7.8 Hz. CQ CQ CQ de WB2LMV WB2LMV WB2LMV pse k STOP
So the RX side seems to be working. I'll see if I can put out a few CQs
of my own later.
It
would be
better. Thoughts please. MM0TOB
---Original Message---
From: Dave Ackrill
Date: 19/02/2010 14:13:16
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] Re: A new Mode !
Just got back in and found the following lines on the screen...
RX: 13:41 UTC -46.9 Hz. iQ CQ
/2010 14:13:16
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] Re: A new Mode !
Just got back in and found the following lines on the screen...
RX: 13:41 UTC -46.9 Hz. iQ CQ CQ de YO4Ctp³;O4CVV YO4CVV pse k STOP
RX: 13:50 UTC -7.8 Hz. CQ CQ CQ de WB2LMV WB2LMV WB2LMV pse k STOP
So
Just submitted this to Jose on his ROS blog page.
What are your thoughts people please.
Thanks for a quick reply Jose. There will be others who can recommend exact
frequencies. I understand about not being swamped in the past lol, but the
sub bands do kind of work. E.g. You'd never see an
Burnett ruff...@hebrides.net
To: digitalradio@yahoogroups.com
Sent: Fri, February 19, 2010 10:29:50 AM
Subject: Re: [digitalradio] Re: A new Mode !
Just submitted this to Jose on his ROS blog page.
What are your thoughts people please.
Thanks for a quick reply Jose. There will be others
Please include the option to select Virtual Audio Cable as the sound
card -- and COM ports 6.
73
Alan NV8A
On 02/19/10 07:49 am, nietorosdj wrote:
Hi,
With the New Version 1.6.2 you can select from COM1 to COM6.
For the future versions, i will make soundcard selectable, no problem.
Regards
And sorry we didn't quite make it last time Glenn.
Toby
---Original Message---
From: Glenn L. Roeser
Date: 19/02/2010 15:52:09
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] Re: A new Mode !
Hello Toby,
Your suggestions sound fine with me. I'm sorry that I
Toby Burnett wrote:
Dave, your the only other G station I see testing this. What are your
thoughts on the 500hz digi mode band allocation and this type of signal,
certainly blasted by rtty but cant help think we are doing the same?
Hi Toby,
I have to say that, given the 'width' of the
Gary wrote:
How do I select a specific sound card? Some of us are using external USB
sound card devices for digital operation.
At present it uses the Windows default soundcard, although this may
change in future releases.
So, you will need to open Control Panel, then open Sounds and Audio
I run the SignalLink USB and it works with no problems with the ROS software
- Original Message -
From: Gary
To: digitalradio@yahoogroups.com
Sent: Friday, February 19, 2010 12:07 PM
Subject: [digitalradio] Re: ROS New Mode
How do I select a specific sound card
Blair (NC5O)
Skype-Russell.Blair
Hell Field #300
DRCC #55
30m Dig-group #693
From: nietorosdj nietoro...@yahoo.es
To: digitalradio@yahoogroups.com
Sent: Thu, February 18, 2010 7:32:32 PM
Subject: [digitalradio] Re: A new Mode !
Hi, tomorrow i will change PTT
23 matches
Mail list logo