19lee79 wrote:
> Since that i be outside relaxing without internet connection at all, can
> i just connect my usb flash drive to the pi itself and listing to my
> music that
> way.https://forums.slimdevices.com/showthread.php?107995-picoreplayer-without-network
Some people in this thread have
19lee79 wrote:
> Since that i be outside relaxing without internet connection at all, can
> i just connect my usb flash drive to the pi itself and listing to my
> music that way.
Short answer is *No*.
You don't need to be connected to the internet, but you *do need to be
connected* to your
Can i play my MP3 on the player sitting outside without any internet
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this thread: http://forums.slimdevices.com/showthread.php?t=115249
19lee79 wrote:
> Since that i be outside relaxing without internet connection at all, can
> i just connect my usb flash drive to the pi itself and listing to my
> music that way.
No.
*Server - LMS 8.3.0 *Pi4B 4GB/Argon one case/pCP 8.0.0 - 75K library,
playlists & LMS cache on SSD (ntfs)
Since that i be outside relaxing without internet connection at all, can
i just connect my usb flash drive to the pi itself and listing to my
music that way.
19lee79's Profile:
19lee79 wrote:
>
>
> So can u play the player not being connect since i have the USB drive
> connected to the pi
Your "smartpi" needs to be connected to your local network.
You could set it up to run in WAP mode > piCorePlayer > Wifi settings
page > WAP Mode. Good luck with that one. :o
You access it via MAIN PAGE > EXTRAS > BOOTCODES > set WAIT FOR USB to
between 5 and 10. and that solved my problem of the USB drive not being
mounted before LMS started. I did that set to about 5 seconds.
But still not the problem.
See, usually when turning on a player of anything mp3 and it
I don't keep my player connected online since i have a USB flash drive
of tons of music on it. But when i power on the Smartipi touch which the
pCP player is on and go to My Music, it comes up and shows this ...
file:///C:/Users/lee/Pictures/100_0514.png
I don't keep my player connected online since i have a USB flash drive
of tons of music on it. But when i power on the Smartipi touch which the
pCP player is on and go to My Music, it comes up and shows this ...
19lee79's
19lee79 wrote:
> Since that i have over 400 songs on my usb flash drive, can i listing to
> the songs without internet connection
yes
*Home:* Pi4B-8GB/pCP8.x/4TB>LMS 8.2.x>Transporter, Touch, Boom, Radio
(all ethernet)
*Cottage:* rPi4B-4GB/pCP8.x/4TB>LMS 8.2.x>Touch>Benchmark DAC I, Boom,
Reading this here "LMS is starting before your USB drive is ready" so
how to go by on solving that problem.
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this thread:
Since that i have over 400 songs on my usb flash drive, can i listing to
the songs without internet connection
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this thread:
sbp wrote:
> I'm not completely sure what your problem is, but I noticed that you
> mention music on an USB-drives and it did not work after powering up.
>
> The problem might be that LMS is starting before your USB drive is ready
> - so try to set "wait for USB" on the tweaks page to
19lee79 wrote:
> Ok, i just power on my pCP player but when i try going to my music on
> the USB drive, it wouldn't it say "To enable My Music try the followings
> I even clicked on autostart in the browser but when i start my player
> again later that night, it did the same thing wouldn't
I don't keep my player connected to the internet since i always listing
to my music on my usb flash drive.
You don't connect players to the internet. I seriously don't understand
what you're trying to do, what you're actually doing, and what the
problem is.
Back when i connected the player
Ok, i just power on my pCP player but when i try going to my music on
the USB drive, it wouldn't it say "To enable My Music try the
followings
I even clicked on autostart in the browser but when i start my player
again later that night, it did the same thing wouldn't going to the
music located
Ok, i just power on my pCP player but when i try going to my music on
the USB drive, it wouldn't it say "To enable My Music try the
followings
I even clicked on autostart in the browser but when i start my player
again later that night, it did the same thing wouldn't going to the
music located
I don't keep my player connected to the internet since i always listing
to my music on my usb flash drive.
Back when i connected the player to the internet to be access online, i
when to the LMS page and restart the LMS to load up on the player and
also i click the autostart and save. so
I made it, i program the firc to the remote and work.
I took the commands that was in the link and tried them all but most of
the commands didn't work. I located another batch like the one that was
in the link, but they had different commands. So I went back and forth
looking and it look me
19lee79 wrote:
> Ok, on the Set IR Device to GPIO or USB. Do i set
> that setting to USB when using a Flirc or any other usb remote
If you are using the FLIRC there's absolutely no need to even look at
that page.
On a PC just program the FLIRC using the FLIRC software and your
JustBoom IR
Ok, on the Set IR Device to GPIO or USB. Do i set
that setting to USB when using a Flirc or any other usb remote
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this thread:
kidstypike wrote:
> Jeff
>
> Not wishing to appear rude here, but the guy seems to have jivelite
> installed, an IR receiver, a JustBoom remote, but needs guidance on how
> to make it all work.
>
> You may recall you assisted me with a FLIRC a few years ago, so custom
> keytables et al are
Jeff07971 wrote:
> I'm sorry I do not understand what you're trying to say.
>
> You keep saying you do not use SSH but then show command line entries.
>
>
> Get your custom jivelite keytables, go to the page on the Web
> GUI and upload it
>
> 36134
>
> Jeff
Jeff
Not wishing to appear
19lee79 wrote:
> I have pCP 8 and i don't like going through SSH or puTTY.
>
> I went over to tab and install the . and where
> i [U]upload custom jivelite keytables to pCP.
>
> Installing Kernal Keytable. do i just upload only this here
>
> 36133
I'm sorry I do not understand what you're
I have pCP 8 and i don't like going through SSH or puTTY.
I went over to tab and install the . and where
i [U]upload custom jivelite keytables to pCP.
Installing Kernal Keytable. do i just upload only this here
36133
+---+
I was thinking the same. I don't use the ssh or putty.
Since that i always connect my Smatipi touch 2 to the wifi and head over
to my router page and go to the site of the Picore page until i get this
here all straighten out.
I went to the tweak tab and install the Kernal Keytables. and where i
19lee79 wrote:
> I looked over here
> https://forums.slimdevices.com/showthread.php?110640-Howto-create-a-linux-kernel-IR-remote-keytable-for-Jivelite-on-piCorePlayer-5
>
> cd /usr/local/etc/keytables
> sudo cp /usr/local/share/pcp-irtools/files/justboomir jivelite
> sudo ir-keytable -c -w
I looked over here
https://forums.slimdevices.com/showthread.php?110640-Howto-create-a-linux-kernel-IR-remote-keytable-for-Jivelite-on-piCorePlayer-5
cd /usr/local/etc/keytables
sudo cp /usr/local/share/pcp-irtools/files/justboomir jivelite
sudo ir-keytable -c -w jivelite
pcp bu
The JustBoom
I have PicorePlayer version 8
So all i need to do is install the
and upload the
i looked at the link
https://forums.slimdevices.com/showthread.php?110640-Howto-create-a-linux-kernel-IR-remote-keytable-for-Jivelite-on-piCorePlayer-5=942525=1#post942525
Is this what i copy and upload on the
19lee79 wrote:
> I have updated PicorePlay to version 8.
>
> So, i don't need to install <(Linux Infrared Remote Control (LIRC)>
>
> Just install Kernal Keytables.
>
> I looked at the link above about the code for the Justboom Ir
>
> So is this here
>
> cd /usr/local/etc/keytables
> sudo
So, i don't need to worry on installing <(Linux Infrared Remote Control
(LIRC)>
Just install Kernal Keytables I now have PicorePlayer version 8
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
19lee79 wrote:
> I went to
> Under
> I installed the LIRC
> Clicking on (Custom) Install your own LIRC configuration file(s)
>
>
> How do i Customize my own LIRC If mapping my own Ir Remote code to add,
> do i need to install anything like a software to my laptop to map my
> own.
Why are
I have now Python 3.10 on my laptop. SO can i use to map out
the configuration of my IR remote to upload on Picoreplayer
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this thread:
Going to
IR page/
Under (Linux Infrared Remote Control (LIRC)
I installed the LIRC
Clicking on (Custom) Install your own LIRC configuration file(s)
How do i Customize my own LIRC If mapping my own Ir Remote code to add,
do i need to install anything like a software to my laptop to map my
Ok, on here
Install your own LIRC configuration file(s)
Default installation only supports Logitech Squeezebox remote. If you
are using another remote controller you need to supply your own
configuration file(s).
To use your own configuration file(s):
Copy the file(s) either:
via
I have the IR justboom remote.
I have (VS1838B) IR sensors,
https://www.amazon.com/gp/product/B087ZRD3LH/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8=1
So when i got to the IR page 36105 Do i I install the
(Linux Infrared Remote Control (LIRC) and click on the button say Custom
Install your own
I been looking over this much better 36099 what is this
Upload custom jivelite keytables to pCP and do i need it.
Also, which one would i need to use
Upload custom lirc.conf to pCP/
Upload custom lircrc to pCP
Right now, i have the IR JustBoom remote.
19lee79 wrote:
> Is there any usb remote controls that will work the player when playing
> a song, play/pause and the rest of the buttons on the player screen
This thread may provide some information:
https://forums.slimdevices.com/showthread.php?111927-Remote-control-for-pCP
LMS 8 nightly
Is there any usb remote controls that will work the player when playing
a song, play/pause and the rest of the buttons on the player screen
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View
19lee79 wrote:
> What are some good usb remotes that will work and control the player
> functions
why not material skin on iPhone or android phone?
*Home:* Pi4B-8GB/pCP8.x/4TB>LMS 8.2.x>Transporter, Touch, Boom, Radio
(all ethernet)
*Cottage:* rPi4B-4GB/pCP8.x/4TB>LMS 8.2.x>Touch>Benchmark
What are some good usb remotes that will work and control the player
functions
36083
+---+
|Filename: piCorePlayer with touchscreen support screenshot.jpg |
|Download:
I customize the home menu by hiding the apps or what you would call them
and added the others like (Music folder and others to the home menu,
easy to locate. But the Question is, can you rename the apps the Music
Folder 36061
kidstypike wrote:
> You need to fill the path to your music files in the field above, *not*
> in the playlist field.
>
> Then rescan.
>
> 36048
Re praise that, When looking up my music on the player, it says Nothing
or Empty...
19lee79 wrote:
> I thought the Media Folder for playing the music files from another
> computer. So the media folder is for playing music from a usb drive.
Yes.
Enter the path to your music files, click "Apply" bottom right, this
will initiate scan.
*Server - LMS 8.3.0 *Pi4B 4GB/Argon one
I thought the Media Folder for playing the music files from another
computer. So the media folder is for playing music from a usb drive.
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this
19lee79 wrote:
> Ok, I re-connected the USB drive to the laptop and created a folder on
> the drive (playlist) and moved all 468 songs to that folder and
> re-connected the drive to the raspberryPi and re-mounted the drive, and
> when i try looking for the songs on the player it keep saying
Ok, I re-connected the USB drive to the laptop and created a folder on
the drive (playlist) and moved all 468 songs to that folder and
re-connected the drive to the raspberryPi and re-mounted the drive
36047
+---+
|Filename:
19lee79 wrote:
> I mounted the USB drive and install the (filesystem since my USB disc is
> in NTFS. but when i go over to Configure LMS i can't located my usb
> drive on the player.
> When adding the USB drive and mount /mnt/lee/slimserver i can't locate
> it in the i even Move LMS locating
36044
I mounted the USB drive and install the (filesystem since my USB disc is
in NTFS. but when i go over to Configure LMS i can't located my usb
drive on the player.
When adding the USB drive and mount /mnt/lee/slimserver i can't locate
it in the
19lee79 wrote:
> I just had finished installing PiCorePlayer on a Smartipi Touch screen
> So, i got it up but once that i installed it on the SD card and insert
> it into the Raspberry Pi 4, it can up but it's upside down. How do i
> rotate the screen
SmartiPi is cool. I didn't even know it
By default yes.
In the Jivelite player interface there are buttons at the bottom for
repeat (a loop with an arrow head) and shuffle (4 lines slightly offset
from each other).
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio
At least this player let u either use IR remote or USB remote why i like
it.
When you play a song, does it move on to the next song like on a CD or
any other MP3 player where it just play song one after another.
Also, how to you shuffle them and will it start over once it reaches the
end of
19lee79 wrote:
> I got the LMS up and running. first what format do the usb flash drive
> have to be in in order to play the songs from my usb drive on the
> player.
>
> I tried one format NTFS and reconnected the usb dring to the player and
> tried but it shows empty on the screen.SO why my
The USB drive needs to be accessible by LMS.
If your pCP installation is where you installed LMS then you need to go
back to the LMS tab in the pCP web interface and check to see what it
shows in the "Pick from the following detected USB disks to mount"
section.
Do you see your disk listed and
So i did mount thw USB flash drive. I noticed on the page Squeezelite is
running, how to start that to play my MP3 from my USB drive.
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this
19lee79 wrote:
> That's players on the network.
> Which i be skipping that. I have much songs on a USB flash drive all
> fixed up, get them from online. SO all i be playing is music from a
> flash drive. AFter inserting the USB drive, how would they show up o
> what player would appear for
That's players on the network.
Which i be skipping that. I have much songs on a USB flash drive all
fixed up, get them from online. SO all i be playing is music from a
flash drive. AFter inserting the USB drive, how would they show up o
what player would appear for playing usb music.
19lee79 wrote:
> That was good help on rotation.
> Looking on the of the PicorePlayer on my raspberry Pi 4
> what is this Choose player
You can select and control any player on your network that's connected
to LMS.
35916
+---+
That was good help on rotation.
Looking on the of the PicorePlayer on my raspberry Pi 4
what is this Choose player
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this thread:
otherwise, I'm sitting here looking at my smartipi touch screen 7" and
everything is upside down, not right side up,
19lee79's Profile: http://forums.slimdevices.com/member.php?userid=72157
View this thread:
The Jivelite section of the Tweaks area in pCP web interface
"Screen rotation (0|180) less>
Allows you to rotate the screen if the display is upside down.
A reboot is required to activate the changes.
Note: On some (most) screen mounts, the screen is actually upside down.
0 - brown ribbon
I just had finished installing PiCorePlayer on a Smartipi Touch screen
So, i got it up but once that i installed it on the SD card and insert
it into the Raspberry Pi 4, it can up but it's upside down. How do i
rotate the screen
62 matches
Mail list logo
