Jim,
Thanks for the reply. Your method actually seems to be more in line
with what I am truly wanting to do, but didn't think was possible.
I didn't think I could have two routers on the same network both
serving as a router. I'm not a networking guy, myself, so I don't
understand the in-depth
ajreinert;293761 Wrote:
> JimC,
>
> I just signed up for the AT&T UVerse service and it will be installed
> in a couple of weeks. I am receiving the 2-wire residential gateway
> (3800HGV), but currently have a Linksys WRT54G router I want to use for
> the purposes of my Slim Devices Squeezebox
JimC,
I just signed up for the AT&T UVerse service and it will be installed
in a couple of weeks. I am receiving the 2-wire residential gateway
(3800HGV), but currently have a Linksys WRT54G router I want to use for
the purposes of my Slim Devices Squeezebox (wireless connection). I
have read m
rbl;287833 Wrote:
> I have also tried plugging the LinkSys into the SpeedTouch, disabling
> DHCP server on the LinkSys, and ensuring they use different channels.
> Then I can connect to either the LinkSys or SpeedTouch.
This is exactly what I did. The utterly craptastic 2wire residential
gate
Millwood;288109 Wrote:
> As I understand it (an this stuff is all pretty mysterious to me) if you
> have both wireless systems on, they should have the same SSID and
> channel.
No that would cause interference. When you run multiple AP's you use
the SSID same name, but different channels on each
Unfortunately the ISP asures me that I can't do that. I actually do not
sue the video on demand at all so maybe I should just give it a go. Not
sure how to find the log in details though?
Is there a way to use the 2 routers separately? Heavy usage on my
laptop for example stops the SB3 working.
rbl;287833 Wrote:
> My ISP (which also has video on demand) obliges me to use their not very
> good modified SpeedTouch wireless router.
Hi rbl
How much have you tried to use your own LinkSys router? I suspect the
ISP one is only using some QoS for the on demand data. If you
configured your
As I understand it (an this stuff is all pretty mysterious to me) if you
have both wireless systems on, they should have the same SSID and
channel.
--
Millwood
Millwood's Profile: http://forums.slimdevices.com/member.php?u
So I have the SpeedTouch (a poor router) with DHCP enabled plugged into
the telephone line, and the LinkSys LAN socket plugged into the
SpeedTouch LAN socket, with DHCP server disabled on the LinkSys. The
LinkSys and SpeedTouch have different SSIDs and channels, but the same
WEP password.
My des
I can't tell you how to follow my suggestion below on your ISP router.
But this is what I have done, and it may work for you.
I have two Airport Extreme base stations, one set up as a remote (or is
it a relay, I forget). To make sure that my Squeezebox connects only to
the nearer one, I have MAC
rbl;287833 Wrote:
>
> I have also read that if you give both routers the same names and WEP
> encryption then you get "a stronger signal".
Wifi doesn't work that way. What will happen is devices will tend to
use the the stronger signal, which will likely be your Linksys.
What you could do is
Thanks!
Is there an advantage between the two?
And is using 2 routers better than using just one (in terms of
interference and bandwidth, not distance)?
--
rbl
rbl's Profile: http://forums.slimdevices.com/member.php?us
Two ways.
1. Use the ISP router to talk only to the Linksys. Connect the
Linksys wan port to one of the ISP output ports. (Configure the
Linksys to a different ip address range - this may not be necessary -
I'm not sure). Turn off the ISP wireless or use a different SSID (and
channel if you l
13 matches
Mail list logo