> I tried it with cygwin but it didn't find ise_helper.tcl. I don't know
> why, the file is at the good place. Do you have any idea of the
> problem, I will ask somebody else at school.
That tells me that xilinx ise "xtclsh" did not know what to do with that
cygwin (unix) file path. That means
If you don't trust me, try it. Use Xilinx on Windows, create a project
and put in all file of all different makefile in the repo for USRP2 with
u2_rev3.v in top. Implement top module and create the bin file. After,
give me some news plz. It's not loosing time, nobody had answer to my
question an
>
>> If you don't trust me, try it. Use Xilinx on Windows, create a project
>> and put in all file of all different makefile in the repo for USRP2 with
>> u2_rev3.v in top. Implement top module and create the bin file. After,
>> give me some news plz. It's not loosing time, nobody had answer to m
Just to place some previous experience I have, if you have diferent
configuration parameters, the hardware, possibly, will not work!!! Same code
without change nothing, and will not work. This is not a USRP issue, FPGA
projects can go wrong with diferent parameters for synthesis.
2011/1/12 Matt Et
On 01/12/2011 12:31 PM, Gabriel Morel wrote:
Ok, I will compile the raw ethernet project for the USRP2 to be sure
that I can modify it and use the modified version to my master. I was
try to compile the project fpga.git under ISE10.1 and under ISE12.1. The
two method compile well, give two differ
On Wed, Jan 12, 2011 at 3:31 PM, Gabriel Morel
wrote:
> If you don't trust me, try it. Use Xilinx on Windows, create a project and
> put in all file of all different makefile in the repo for USRP2 with
> u2_rev3.v in top. Implement top module and create the bin file. After,
> give me some news
Matt,
Ok, I will compile the raw ethernet project for the USRP2 to be sure
that I can modify it and use the modified version to my master. I was
try to compile the project fpga.git under ISE10.1 and under ISE12.1.
The two method compile well, give two different size of binary file,
but bo
- Original Message -
From: "Matt Ettus"
To: "Gabriel Morel"
Cc:
Sent: Wednesday, January 12, 2011 2:43 PM
Subject: Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with
UDPimage ...but not with compiled Raw Ethernet Image
Matt: If the raw
Matt: If the raw ethernet version can only be compile with ISE 10.1, why
the bin file on the net is 842.4KB. When I compile the project on
ISE10.1, the bin file is 837KB
Gabriel,
I can't follow what you are doing here. Do you want the raw ethernet
version or the udp version? Which versio
- Original Message -
From: "Matt Ettus"
To: "anirudh2059."
Cc:
Sent: Wednesday, January 12, 2011 2:10 PM
Subject: Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with
UDPimage ...but not with compiled Raw Ethernet Image
On 01/12/2011 05:13 AM
10 matches
Mail list logo