What an interesting selection of replies, I am not into drilling holes in
equipment at all, so all the mods will be reversable, some are just common
sense like changing out caps and the power board, however I do keep all the
'bits' just in case I wish to sell the radio, but this one is a keeper.
I am thinking about doing the full works Sherwood mods on my R4-C. Which are
the best to do? I don't mind how far I go with this, I just want the best
receiver for my money, I would like it for Top band use but I know it will be
good for all frequencies however 160M is where I want to go.
73 Ma
Help... Does anyone have a nice unscratched casing for an L-7 amp, just got one
minus the case. no idea how that happened.
73 Max___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
My R4B which I was refurbing for this W/E CQWW has a couple of issues, firstly
the power supply intermittently hums, I can see that the Cap is loose on the
power supply board and the resistor has been badly replaced so is probably the
problem there, is there an upgrade board available as this on
Where can I buy a GUF-1 filter for my R-4C?
73 Max
M0GHQ
--
I am using the free version of SPAMfighter.
We are a community of 7 million users fighting spam.
SPAMfighter has removed 3085 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional versi
Does anyone have a spare original manual for an MN-2700, must be clean, cash
waiting,
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 7 million users fighting spam.
SPAMfighter has removed 2725 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfi
I have been working on a pair of my L-4B's and have noticed that the parasitic
resistors are a different value on one amp than the other, the first one has 3x
150 Ohms and the second has 3x 15 Ohms, is this a modification or an error,
both perform OK just didn't want to run any risks here, these
Dilemma time... I have been offered a TR-7 but I have to sell my C-line to make
room, now, comparisons, is the TR-7 any better than the C-line or the same,
apart from the normal cosmetic issues (sticky paint etc) am I going to gain in
the rx dept, also any other faults etc, the TR-7 seems to hav
I am looking to buy an LC-2 speech processor for a T-4XC or B. if anyone has
such a beast, please reply off list, cash/paypal waiting.
73, Max
M0GHQ/KJ4ISS
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2427 of my spam e
I have an FL500 for an R-4C which I would like to exchange for an FL250 if
anyone wishes to do a deal, failing that if anyone has an FL250 and an AM 6khz
filter they would like to sell me, here's hoping,
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users
Thanks for all the help and advice on this, it would appear that my pencil
soldering iron and swear box are going to be redundant this week as all the 10m
mods appear to be already installed, might be a factory job as no lowpass
filter has ever been fitted either.
One thing is puzzling me, the L
I have just got an L-7, the wavechange switch does go to 10m band but I am not
sure if it actually does 10m or not, is there an easy way to tell? I think the
10m mod is the addition of two capacitors?
Also the case is damaged on the top which is irritating, any ideas on
refinishing, it looks lik
I can also see that T1 has been damaged at some point maybe this is having an
influence on T6?
I am in the process of rebuilding a T-4XC transmitter, before I test this, I
noticed that the slug on T6 grid coil has been wound in somewhat, now I assume
this has been done by some misguided pe
I am in the process of rebuilding a T-4XC transmitter, before I test this, I
noticed that the slug on T6 grid coil has been wound in somewhat, now I assume
this has been done by some misguided person as I am thinking all of these
should be the same height? I refered to the manual and it says abo
Wow, thanks guys, I will get to it right away, I can see that now, easy when
you know eh?
Happy Holidays!
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2216 of my spam emails to date.
Get the free SPAMfighter her
Right then, so far this R-4C is now working, I have managed to find the
transformer, xtals and NB board, thanks for all those who responded, what a
great group this is :-), the radio works (mainly alignment) thanks to the
xtals from my other 4C, however the PTO bearings are very loose so the kn
Some of the std crystals seem to be duff in my latest R-4C aquisition, is this
a common problem or am I being a bit unlucky here? never come across this
before, meanwhile, anyone got a set of stock xtals lying around they don't want
;-), also need the circular mylar film scale behind the crystal
I also require a mains transformer for an R-4C as it is rattling like mad,
unless there is a cure for this? (not taken it apart yet)
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2211 of my spam emails to date.
G
Does anyone have a spare noise blanker board for an R-4C they wish to sell?
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2211 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/l
ssage -
From: AirRadio
To: drakelist@zerobeat.net
Sent: Tuesday, December 01, 2009 6:42 AM
Subject: [Drakelist] L-7 psu vs L-4 psu
What is the difference between a L-7 psu and the L-4 psu, can I run my L-7
from the L-4 power unit?
7
What is the difference between a L-7 psu and the L-4 psu, can I run my L-7 from
the L-4 power unit?
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2131 of my spam emails to date.
Get the free SPAMfighter here: htt
Help, need a power unit for an L-7 amp, anyone out there got one for sale?
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2131 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/le
Does anyone know where to get or have one of the 4 pin accessory plugs found on
the rear of the R-4C? really need one.
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2104 of my spam emails to date.
Get the free SP
Just something puzzling me, what is the significance of the end of serial
letters R, B and G, etc?
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2087 of my spam emails to date.
Get the free SPAMfighter here: http
Thanks for the info, I'll pass on that then, I'll stick with the twins,
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 2085 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
I have been offered a TR-4C, however it would appear that this is not suitable
for the WARC bands or am I mistaken (likely), also how rare are the noise
blankers.
Ideas?
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has rem
I have recently aquired a very late serial (28K) R-4C and although it is a good
receiver and has the 3 filters on the rear of the set, it could almost
certainly do with improvement, I looked at the Sherwood website and can see a
range of mods worth doing, I have also read about a lot of worthwhi
Can someone point me in the right direction to buy the ACCY Power plug for the
R-4C. I had one once before buying the C line and stupidly gave it away, DOH,
isn't that always the case!
73 Max M0GHQ/KJ4ISS
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighti
Bill,
Good luck with the retirement, every day will be a Saturday except Sunday ;-)
I am sure you will soon wonder how you ever had the time for work, hope to work
you sometime with a Drake B or C line.
73 Max M0GHQ/KJ4ISS
--
I am using the free version of SPAMfighter.
We are a community of 6 mil
Are the extra band crystals available from ICM or similar suppliers for the
R-4B and T-4XB, I am very impressed with the twins I have just bought and want
to be able to extend the ranges.
Are there any issues tuning them up on the warc bands or 160m?
Also if I send the cases back to be refinished
Test, this reflector does not seem to be working again??
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 1964 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional versi
I run a BC-375 (350w+ carrier) through a Johnson Kilowatt Matchbox, similar
power ratings with no problems, most of this older kit is very
conservatively rated I would have no worries running 350w of AM through the
MN-2000, it will cope with 150w with ease. By the way listen for Europe
AM'ers o
Does anyone have some original manuals for the T-4XB, R-4B and the matching
AC-4 power supply they could sell me, cash waiting,
73 Max
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 1834 of my spam emails to date.
Get th
Well, thanks everyone for a very interesting and lively response to my mail on
this reflector, great to have so many opinions and thoughts on this subject, I
think after due consideration I will be looking for a TX-4B and an R-4B the
choices were made on the following, most of the 'extras' come
Kris,
Apparently they are the two versions of the front panel, the B having a border
around it, early type and the C no border later version,
regards Max
M0GHQ
- Original Message -
From: Kris Merschrod
To: AirRadio ; drakelist@zerobeat.net
Sent: Monday, September 14, 2009 3
Right then, this will I am sure occur lively debate, I have a couple of L-4B
(B&C versions) linears and MN-2000's that I regularly use with 'other' radios,
it has occured to me at various times to maybe get a tx & rx of Drake
manufacture to go with them, however there are a great variety to choo
Does anyone still make the 200uf 450v capacitors any more for the L4PS? before
I buy a new board, reason being this one is brand new and it seems a pity to
modify it if the original components are still available, I will however change
the resistor underneath, I also need a source of that resist
ll reports have been very favorable.
Crystal Morgan is the contact. 937 859-5955.
73, Mark
www.k4so.com
www.picasaweb.com/kfourso
kfourso.googlepages.com
-Original Message-
From: AirRadio
To: drakelist@zerobeat.net
Sent: Tue, Aug 4, 2009 10:26 am
Subject: [Drakelist] L-4B
Help.. I am in desperate need of both the parasitic chokes that go on top of
the two tubes along with the two finned tube tops and also a mint cabinet top
for an L-4B, failing that an address of someone that can refinish the cabinet
in the original black fleck finish, what is that finish called
QSL, Still here also, 73 enjoy the field day coming up! over,
73 Max M0GHQ
--
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 955 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
T
Who is the guy that makes repro front panels for Drake gear? I need one for
the L-4B.
73 Max M0GHQ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Before I try this and damage the amp, has anyone used the L-4B on any warc
bands with success without altering anything?
73 Max M0GHQ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
test. ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
I have noticed recently that my L-4B only seems to be putting out 800 to 1000w
to the antenna on SSB setting and around 600w on tune key down, is this correct
or are the 3-500z's getting a bit old, I thought I was getting more than that
sometime ago but cannot remember. 73 Max
"AirRadio" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Terry, Also no posts here either, however your one came through. The other
day about 40 came through in one go. maybe a server playing
Dick, It is a fuse in a sense, if you get a grid filament short it will burst
the resistor instead of more expensive bits, the replacement parts are infact
1 ohm 2w. you will be OK, 73 Max M0GHQ
- Original Message -
From: Donley
To: drakelist
Sent: Friday, February 01, 2008 9
Bent, Do NOT use copper grease on any bearing surfaces like ball or roller
bearings, it is designed as a heat transfer grease like for brake pads, screws
and heatsinks, but not bearings, the small particles will interefere with the
smooth surfaces, light Lithium based or or any of the light high
I am fairly new to drake equipment, only owning a mint L-4B in use daily, but
how cool is that AC-3 with the gold caps!, maybe I'll have to make more shack
room. 73 Max
On my L-4B the fan switches off when the power is disconnected (normal), has
anyone made a system using the original components to keep the fan running for
a few minutes after switch off? I did this with my other linears and it does
extend the tube life, trouble is with the L-4B it has a 110v fa
I have been looking very carefully at buying a C-line, there are a few
questions I would like to ask, 1, Are there any major faults to look for, I
expect rigs of this age to have some faults, however are there any particular
things to look for. 2, I notice they produce AM, now I am assuming this
Does anyone happen to have a good condition original, not reprint, manual for
the MN-2000 tuner they would like to sell me? 73 Max
"AirRadio" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Steve, All is 240v I double checked that, anyway its been running 3 hours
now with a new pair of Eimac's, just running them in
I have just rebuilt my L-4B power unit and fitted the new cap/diode board from
the HK man. it works very well indeed and is a worthwhile and easy mod, anyway
to the point, the RF deck transformer hums quite loudly I cannot remember it
doing it before but it is a while since I ran this one, not a
Happy New year everyone, Now more bits requiring renovation, I am in need of
the rubber feet for my L-4B, is there a source of these anywhere, my ones have
nearly worn out. 73 Max
"AirRadio" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Hmmm, should read ''from my personal collection the finest (junk) I've seen
(in the dark) and only just working (not tes
Anyone in the Drake list do AM? if so you probably already know about the Heavy
Metal weekend, please give a shout for us in Europe on 3.705 and 3.615, around
05.00z there are stations from England, Wales, Ireland, France, Holland and
Malta on this frequency regularly at that time most days, so
Evan, Found it and printed a copy for my notes, thank you, I could not get the
mods.dk to give me a password or anything so gave up on them for the moment.
I'll try them again someday. Meanwhile the board and components are from Ramsey
electronics and it is an RFS-1, some sort of remote RF switc
Does anyone have a circuit diagram / schematic for the L-4B that they could
email me. 73 Max
"AirRadio" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Kevin, Snow is a funny white stuff that comes from the sky during the winter
cold months, When my wife (Filipino) first came to this coun
"AirRadio" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Jim, Thanks for the note, Yes I fully understand the carrier input etc, what
I meant to say and put it badly was by how much was 100w
Hi gang, Has or does anyone run an L-4B on AM, if so what is the max output to
the antenna expected with 100w carrier input, having said that is 100w too much
for the input, regards Max
Does anyone out there have a couple of genuine, not copies, manuals for the
MN-2000 tuner and the L-4B, in good condition. email me off list. I will pay by
Paypal for these, I am in the UK, 73 Max
My L-4ps transformer has had a serious sparkout and failed badly, does anyone
have a good one for sale or a complete unit any condition as long as working. I
am in the UK and am prepared for the shippping costs, regards Max
63 matches
Mail list logo