Greetings,
Trying to find a source for the 8 Amp fuse with pig tails that solders into the
filament string on the T4XB. Can find the fuse but not with pig tails, any help
would be appreciated. Thanks.
73 Gary___
Drakelist mailing list
I've never tried this, but couldn't you just clip the leads off of a cap
or resistor from your junk box and solder them on to the end caps of a
regular 8a fuse. You would certainly reflow the inside connection but as
long as you still have continuity when your done, no harm no foul. I
wouldn't
PM
To: drakelist@zerobeat.net
Subject: Re: [Drakelist] Drale Fuse
I've never tried this, but couldn't you just clip the leads off of a cap or
resistor from your junk box and solder them on to the end caps of a regular
8a fuse. You would certainly reflow the inside connection but as long as you
Gary,
You could try to use an in-line fuse holder. You will have to dress the wiring
a little differently. These should be available, even at Rat Shack.
Kurt
From: k...@msn.com
To: drakelist@zerobeat.net
Date: Thu, 13 Oct 2011 10:24:00 -0700
Subject: [Drakelist] Drale Fuse
Greetings
There are any number of sources for axial pigtail fuses. Here is one.
Why mess around with jury rigs?
http://www.mouser.com/Circuit-Protection/Fuses/_/N-5g3l?P=1z0s75vZ1z0vl8vZ1z0z819
On 10/13/2011 12:24 PM, GARY ELLIOT wrote:
Greetings,
Trying to find a source for the 8 Amp fuse with
Gary -
Newark has them.
http://www.newark.com/jsp/search/productdetail.jsp?ICID=ILC-1catalog128onlinecatalogsku=26K8586
$0.65 each.
73, Garey - K4OAH
St Charles, IL
Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs
www.k4oah.com
GARY ELLIOT wrote:
Greetings,
Trying to
Gary -
The other alternative is to mount one of the little single fuse blocks
that mounts with a single hole. Then takes regular fuses.
But unless you have a short on the filament line you should never blow
another one.
73, Garey - K4OAH
St Charles, IL
Drake 2-B, 2-C/2-NT, 4-A, 4-B,
Barrell mailto:k4...@mindspring.com
*To:* GARY ELLIOT mailto:k...@msn.com
*Cc:* drakelist@zerobeat.net mailto:drakelist@zerobeat.net
*Sent:* Thursday, October 13, 2011 12:36 PM
*Subject:* Re: [Drakelist] Drale Fuse
Gary -
The other alternative is to mount one of the little
I had that fuse go up in my TR3 back in the 80s. I never found a cause. I
replaced it, and it ran fine until I sold it several years back.
--- On Thu, 10/13/11, Garey Barrell k4...@mindspring.com wrote:
From: Garey Barrell k4...@mindspring.com
Subject: Re: [Drakelist] Drale Fuse
To: GARY
9 matches
Mail list logo
