[EMAIL PROTECTED] made an utterance to the drakelist gang
--
As a side note, you might have to contact John via telephone. He has a very
aggressive spam filter; for example, it often blocks all email from AOL. He's
a really ni
Exactly. After removing the 2 pin jack, I took a piece of scrap aluminum,
centered approximately over the holes and traced the opening and screw holes
with a pencil. Then all you have to do is drill some holes. The screws I
believe are 4-40 which means use a 7/64 inch and the RCA is ΒΌ inch. For
hol
"" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
This is not rocket science, guys! You take out the old jack, cut a piece
of aluminum to cover the old rectangular hole. (The size is not critical.
It just has to
Thom LaCosta <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
"" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
Your mail client isn;t setup correctly, there is no name entered, which
results in the
"" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
You can build a conversion kit yourself for the cost of ONE RCA jack and
ONE small piece of aluminum plate plus a couple of screws and nuts. As I
recall, when I d
john <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
I think that's John (The Man) Kriner ...
At 11:17 AM 1/1/2007, n7ioh wrote:
n7ioh <[EMAIL PROTECTED]> made an utterance to the drakelist gang
"Ron Baker" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Al, that is John Kriner selling that kit. Its actually a kit from Drake,
sold when they couldn't get the original plugs. John also sells a lot of
other
Dino Papas <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Sure would be nice if someone would just measure that aluminum plate
and pass it around (drawing would be perfect!)it would be a cinch
to fabricate
8 matches
Mail list logo
