On Mon, 2002-07-08 at 18:36, David Willmore wrote:
> Log bits:
> (--) PCI:*(1:0:0) S3 ViRGE/MX rev 6, Mem @ 0x4000/26
> (II) LoadModule: "s3virge"
> (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
> (II) Module s3virge: vendor="The XFree86 Project"
> compiled for 4.2.0, module
On Mon, 2002-07-08 at 06:51, David Willmore wrote:
> In X server startup, the drm fails to load. If I exit and try to modprobe
> it myself, I get errors about a bunch of AGP symbols not being resolved
Try recompiling the module with (in s3v.h)
__HAVE_AGP set to 0
(I should make this the defau
On Sat, 2002-07-06 at 04:25, David Willmore wrote:
>
> Bad news and it's not your fault. So :( :)
>
> I got your driver to build and I went to load it, but
> my laptop with this chipset is a Compaq Armada 7400
> which uses a Compaq chipset--no agpgart. *do-oh*
>
I cannot undersand:
a) is the
On Thu, 2002-07-04 at 17:28, Jens Owen wrote:
> Max,
>
> Have you seen how the Radeon driver has different routines for 2D
> accelleration with DRI enabled (uses CP) vs DRI disabled (uses MMIO)?
>
Interesting. Really. I was not aware of that. I will get in touch
with Kevin Brosius later this m
On Thu, 2002-07-04 at 16:59, Dieter Nützel wrote:
> Sorry for my repost but I got no answer from you.
I did not reply since I am still waiting an answer from S3/Via about
this ; )
The same applies to the guy who asked me some infos about electrical
specifications.
> So do you think it is possibl
On Wed, 2002-07-03 at 22:38, Dieter Nützel wrote:
> Have you tested with UT (436) _and_ quake3 (1.31) at the _same_ time?
On a PII-233 with a 4MB gfx card? Come on get real! I can run battalion,
atlantis, and gears at the same time. Psx emulation is fine with some
simple games too. But Quake2 is
On Sat, 2002-06-29 at 23:27, Anders Haugen wrote:
>
> Hi,
> i did some changes and got the s3virge code from the cvs working here.
> seems the dma stuff wasn't initializing at all for me.
1) Your patches seem ok to me. I am quite busy up to 2nd half of July,
so I wont be able to fully test the
On Thu, 2002-06-27 at 03:38, John J. Tobin wrote:
> No change, it still hard locks the system. I tried the binary snapshot
> too and the kernel modules wouldn't build.
mmm... ; (
> The windows for gears will open and then a section of the lower half of
> the screen becomes corrupted at the loc
On Wed, 2002-06-26 at 19:16, Alan Hourihane wrote:
>
> It builds now, so could you 'cvs update' build, install, and check
> everything is working.
I had some problem building it in mesa/src/drv/s3v
In s3v_context.h (215) I have something like "drm_s3v_sarea_t". Where
other drivers seems to hav
On Thu, 2002-06-27 at 00:24, John J. Tobin wrote:
> Alright, I have it built, took long enough on my K6-2 laptop but I have
> having some problems. Glxinfo reports that there is direct rendering and
> everything but if I try to run glxgears the system hard locks. The specs
> are:
> Sager NP9800 l
On Wed, 2002-06-26 at 16:48, José Fonseca wrote:
> Are the ProSavage docs you have enough to get a good start on Savage4?
their 3D engine is nearly identical. Er, I forgot, I got Savage4 docs
too from S3/VIA. I am definetly the luckiest coder on Earth ; )
So on a Savage4 running my hack you wi
On Wed, 2002-06-26 at 19:16, Alan Hourihane wrote:
> > I'll try and give you a hand on this now.
T H A N K S
Be my guest in case you travel to Italy ; )
> It builds now, so could you 'cvs update' build, install, and check
> everything is working.
Ok. I am doing cvs update right now ; ) I w
>> Do you mean S3 Savage MX or is it a S3 virge MX???
>> Thanks,
>> JrSky.
S3 *** Virge *** MX. For Savage MX try utah. Or wait for us to code a
driver ; )
Vale,
- max
---
This sf.net email is sponsored by: Jabber Inc.
Don't miss the IM ev
On Wed, 2002-06-26 at 15:52, Alan Hourihane wrote:
> I'll do the merge now for you.
>
> Obviously this branch won't build at all until fixed up for the
> new drmCommand stuff.
I have been away a couple of months from active development. Where could
I gather more infos about drmCommand? Is it ea
On Wed, 2002-06-26 at 12:45, José Fonseca wrote:
>
> Max, is there any file related to i830 missing or outdated in the
> s3virge branch? Or perhaps the i830 driver should be disabled on this
> branch.
There was a stale #if 0 in drm/kernel/drm.h. Fixed now. Could you please
let me know if this i
On Wed, 2002-06-26 at 13:07, Alexander Stohr wrote:
> > A bit I had to study (laws + Savage4 docs).
>
> Savage4 docs???
> can you tell me whats up with them now?
I got ProSavage docs and BCI tech ref from VIA/S3 under NDA. I have a
very primitive Savage4 3D driver too (it paints just 3D tris - b
On Wed, 2002-06-26 at 12:54, Alan Hourihane wrote:
> I can do the trunk merge for you, if you want to fixup the code
> later.
Ok. It would be very nice from you. What I am supposed to do after:
cvs update? So that code on my HD will get in sync with CVS?
Thanks in advance,
vale,
- max
-
On Wed, 2002-06-26 at 12:54, Alan Hourihane wrote:
> Looks like the s3virge branch is lagging quite a bit behind the trunk.
Yep. The branch was created in late March.
> Max - you should bring in the current trunk code into your s3virge
> branch and fixup for the new drmCommand interface.
Ok. I
On Tue, 2002-06-25 at 19:28, Jens Owen wrote:
> Wow, looks like you've been busy. Let's see what kind of feedback you get.
A bit I had to study (laws + Savage4 docs). A bit I have to workc.
A bit I had to drive my Toyota MR2 Roadster. A bit I had to live.
; )
Feedback is starting to rise. Sh
On Tue, 2002-06-25 at 16:48, John J. Tobin wrote:
>
> Is the Virge MX+ supported? This is the one that was commonly found in
> notebooks, as that is what I will be testing it out on.
>
Yep. That is the laptop on which I developed my driver on. so it will run
better on it than on everything els
On Tue, 2002-06-25 at 16:34, José Fonseca wrote:
> On Tue, Jun 25, 2002 at 02:43:39PM +0200, max wrote:
> In http://dri.sourceforge.net/snapshots/bleeding-edge/ as mach64 branch, the
> old radeon tcl branch, and soon the radeon 8500 branch, or for any other branch (x86
>Linux only I'm afraid).
I have noticed the new work going on with T&L Radeon driver, and I am
very excited about it (BTW: I am the one who coded DRI driver for
s3/virge). Now I got a ppc (RS/6000 ppc PCI only) too, and I would like
to do some DRI coding on it, so I ask to you [please tell me if I am
addressing the wron
22 matches
Mail list logo