[DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread ham44865
Open G2 Gateway and linking is now OPEN SOURCE at sourgeforge under a GPL/"Free" License at: http://dstardextra.sourceforge.net/ I am sure you can download the source C files. About 310 downloads of the Open G2 software, so far. If you can not, give me a holler. I can also install it and confi

Re: [DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread Nate Duehr
Ahh yes, the same "be patient" story that was told about rptDir ... Because you know, that's how ALL the best open-source projects work. They hold back code in case "hackers" might see it, and store it in a closed YahooGroup's Files area. Nate On Oct 4, 2009, at 4:04 PM, ham44865 wrote: >

[DSTAR_DIGITAL] D-STAR/Analog 10 kHz Adjacent Channel Experience

2009-10-04 Thread Gary Pearce KN4AQ
D-STAR/Analog 10 kHz Adjacent Channel Experience Gary Pearce KN4AQ October 3, 2009 I just had some experience with interference between a D-STAR repeater and an analog repeater, 10 kHz apart, that I think may be educational. Here's the story. This morning I was a SAG Wagon on a BikeMS publi

[DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread ham44865
> "Around the country" means around the USA? Yes. > What international fair is that? ICC or something, not sure of the exact name. > ...that are part of the K5TIT trust server network? Yes. It is beautiful, the way it works. Running tcpdump and watching how the ICOM controller talks to our Open

RE: [DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread Bob McCormick W1QA
Scott KI4LKF wrote: > We will wait a little longer so that the software can be > presented at the International Fair this November, ... What international fair is that? > Currently we are busy taking "orders" and installing it > around the country at multiple ICOM G2 hardware sites > and also

[DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread ham44865
Most of the Open G2 has been released at sourceforge: http://dstardextra.sourceforge.net/ under GPL The rest of it is being installed at multiple sites with either our RPTR/gmsk program that controls a GMSK RF modem(adapter,node,...) or all ICOM G2 software (dsgwd, dsipsvd) removed and our Op

[DSTAR_DIGITAL] ARRL Technical Innovation Award

2009-10-04 Thread bosshardss
I was just sitting in the library, thumbing through the October 2009 edition of QST Magazine and ran across Dan Smith, KK7DS on page 66 being the recipient of the 2009 ARRL Technical Innovation Award for his contributions to DSTAR including D-RATS and Chirp among other contributions. The article s

Re: [DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread Tony Langdon
At 03:22 AM 10/5/2009, you wrote: >2. Who controls it? >"The D_STAR_Open_Source_group" I would also be asking about the guarantee of access to the download/support forum as well, without arbitrary decisions about who can enter the support forum. >3. What license is it released under? >"The D_

Re: [DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread Jack Hamilton
On Oct 4, 2009, at 11:10 am, John Hays wrote: > Which is a closed and restricted Yahoo! Group. And since "open source" requires that the source be available to the general public, the project in question is not open source. > > Next... > > -- > John D. Hays > 206-801-0820 > Sent from my iPh

Re: [DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread John Hays
Which is a closed and restricted Yahoo! Group. Next... -- John D. Hays 206-801-0820 Sent from my iPhone On Oct 4, 2009, at 9:22, Nate Duehr wrote: > So, was that the answer to all three questions posed? > > 1. Where's the source available from? > "The D_STAR_Open_Source_group" > > 2. Who contr

Re: [DSTAR_DIGITAL] DV DongleTX

2009-10-04 Thread Gary Pearce KN4AQ
At 09:43 AM 10/4/2009, bbergstr2003 wrote: I once saw a video from the Dayton Hamvention of AA4RC talking about the DV DongleTX (DV Dongle with the transmitter). Does anyone know when this unit will be in production? There was also talk of a version with both RX and TX. Any news on the deve

Re: [DSTAR_DIGITAL] Re: Finally, an Open G2 that runs on ICOM repeater-controller hardware.

2009-10-04 Thread Nate Duehr
So, was that the answer to all three questions posed? 1. Where's the source available from? "The D_STAR_Open_Source_group" 2. Who controls it? "The D_STAR_Open_Source_group" 3. What license is it released under? "The D_STAR_Open_Source_group" Nate WY0X On Oct 3, 2009, at 10:11 AM, ham44865 wro

[DSTAR_DIGITAL] DV DongleTX

2009-10-04 Thread bbergstr2003
I once saw a video from the Dayton Hamvention of AA4RC talking about the DV DongleTX (DV Dongle with the transmitter). Does anyone know when this unit will be in production? There was also talk of a version with both RX and TX. Any news on the development of this unit and when it will be availa

[DSTAR_DIGITAL] DV DongleTX

2009-10-04 Thread bbergstr2003
I once saw a video from the Dayton Hamvention of AA4RC talking about the DV DongleTX (DV Dongle with the transmitter). Does anyone know when this unit will be in production? There was also talk of a version with both RX and TX. Any news on the development of this unit and when it will be availa