[Duo2400] Re: System Freezes / Print Monitor w/ 2400 G3

Tom Klinkowstein on 4/9/01 11:26 PM wrote: > I'm getting Type 10 errors and freezes just after boot-uo when I have > Print Monitor in the Extensions folder of my 2400 G3 (OS 9.04). > > I think its a virus of sorts (goes away when I trash the Print Monitor). > > Anybody have any ideas how to fix

[Duo2400] Re: Macs overseas

Further to the foregoing, I’ve read with interest the vaaried theories and comments re problems with reversed line polarity. I haven’t experienced this even though my trusty Road Warrior “modem saver” line tester frequently shows a reversal (overseas). The booklet says the modem will work under

[Duo2400] WTB: dead dock

Hi All I am looking to acquire, by hook or by crook, a dead duodock. Full size, mini, micro, the size is not the issue. So if you have a bookend or monitor stand that used to be a dock, let me know. TIA Andrew -- Duo/2400 List, The friendliest place on the Net! A listserv for use

[Duo2400] Re: Problems with latest iCab?

At 2:51 PM -0700 on 4/10/01, Sidney Ho wrote: >From just up the Charles river, Mass Ave. or Memorial drive..., an MIT geek >needs a Harvard guy to sort you out, eh? ;-) If that's what I need, why do I think I'm in real trouble? ;-) >This advice can be followed in a quick and dirty way (similar

[Duo2400] Re: Problems with latest iCab?

At 2:51 PM -0700 on 4/10/01, John Davis wrote: >Try Opera - it's wonderful!! Easily the best. Snappy! Opera is not snappy at all on a 68040 --- in fact it just sits there taking up space!! Of course, that's because Opera is PPC only. Though they've promised a 68040 version, I'm no holding my b

[Duo2400] Re: Macally USB Card with 2400 - ResEdit Necessity

That will not be enough. Apple used the same trick on the 1.4.1 installer that they use on the downloadable USB DevKit. Yes, you must do what Tom said and extract using Tome Viewer, but then you must add a resource to the USB Support extension. 1. Make a duplicate of the file and open it in ResE

[Duo2400] Re: stylewriterII print driver...

if you need any driver's for your powerbook i will send an attachement of the driver,s just ask =) -- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at Be sure to visit Mac24

[Duo2400] Re: Problems with latest iCab?

Ditto. Major problems of same sort. Tried everything including asking them for help, even in German , but to no avail. I'm at a point where I hardly use it anymore. Sad, because when it works it's a great piece of software. -Tobias. In a message dated 10.04.01 17:52:45, [EMAIL PROTECTED] writ

[Duo2400] Re: Macs overseas

- > Advised by a friendly salesman in Auxerre, I tried a > : > Proline TL029 cable plug RJ11-6P/4C3M (for FRF 59 = > USD 8 to 9) > This appears to be the modular plug that is needed > to let everything run > smoothly. > We now finally have connection to our family in > France. - Radio

[Duo2400] Re: Need help and information regarding my 2400c and OS 8.6

I would pay $10 for a broken one, just to make a flask out of it. This way I could look cool when walking around Mac World SF drunk. ShaneW PS One of these years, I plan on being sober all day though a Mac World, but until then... > > Also, do any 2400 owners have an extra floppy > drive cable

[Duo2400] Re: can't find SMTP server error?

> > Did you enter the correct DNS-server(s) in the TCP/IP control panel ? >> >> Luc > >No, but then on my ibook i didn't either, and oe still worked fine. in fact, >i thought that telling the tcp/ip panel to get all the info from the server >(to "use server ppp") was enough. am i to think that's

[Duo2400] Re: System Freezes / Print Monitor w/ 2400 G3

on 4/10/01 Tom Klinkowstein <[EMAIL PROTECTED]> wrote: > I'm getting Type 10 errors and freezes just after boot-uo when I have > Print Monitor in the Extensions folder of my 2400 G3 (OS 9.04). > > I think its a virus of sorts (goes away when I trash the Print Monitor). > > Anybody have any idea

[Duo2400] Re: Sidney HO?

on 4/10/01 Andrew at [EMAIL PROTECTED] wrote: > In a message dated 4/8/01 9:35:52 AM, [EMAIL PROTECTED] writes: > >> Hey, y'all. Wh-a-a-chit! That's my family name you're playing with there! >> Too long outta America, too little TV an' this is the cultural evolution >> I miss out on! ;-) >> >>

[Duo2400] Re: Problems with latest iCab?

on 4/10/01 Jeffrey K. Bounds" <[EMAIL PROTECTED]> wrote: > Is it just me, or are others having problems with iCab pre-2.4 for the > 68040? After pre-2.3, I pretty much got used to using iCab for 90% of my > surfing, but now pre-2.4 *always* crashes with a Type 1, Type 2, or Type 3 > error after

[Duo2400] Re: I NEED HELP!!

on Paul Miller <[EMAIL PROTECTED]> wrote: > The cord must have gotten pinched. I > temporarily spliced and soldered the cord tonight. I > tried it and it works. I also not notice that I get > the RED X OVER THE BATTERY ICON! I plug the battery > into the computer and notice the charge-level >

[Duo2400] Re: stylewriterII print driver...

On Tuesday, April 10, 2001, at 11:53 AM, Paul Nelson wrote: > At 9:52 AM -0400 4/10/01, Tom Rymes wrote: >> There is a little trick to reset the serial ports, IIRC. >> >> If you hold down the option key and open the chooser, the serial ports >> will >> be reset. It might be the command key, it m

[Duo2400] Re: Macally USB Card with 2400

I had a 2400 that was as you said flaky at best...tried the software reinstall. tried 8.6 Vs 9.1, with various combos of the cardbus support software...bottomline...I went to MCE and had the 2400 enabled and it worked much better, though a little quirky...like you still cannot shut down or restart

[Duo2400] Re: stylewriterII print driver...

At 9:52 AM -0400 4/10/01, Tom Rymes wrote: >There is a little trick to reset the serial ports, IIRC. > >If you hold down the option key and open the chooser, the serial ports will >be reset. It might be the command key, it might be both together. Does >anyone else know for sure? My sincere thanks

[Duo2400] Re: Macally USB Card with 2400

>I'm trying to use a macally usb card in my 2400. The card's specs say it's a >32 bit cardbus device. I don't have a cardbus upgrade. It's not surprising >that it doesn;t work however I remember some duolisters mentioning that >a macally usb card worked for them in non-vardbus 2400s. Is there an ol

[Duo2400] Re: I NEED HELP!!

>After no charge from the adapter >and every battery used up I finally got around to >looking at the old adapter (and ordering another from >MCE). The cord must have gotten pinched. I >temporarily spliced and soldered the cord tonight. I >tried it and it works. I also not notice that I get >the

[Duo2400] Re: Macally USB Card with 2400

go to version tracker and get tome viewer...it will let you open up the installer and put the 6 or so extensions in your system folder... -- > From: [EMAIL PROTECTED] > Reply-To: <[EMAIL PROTECTED]> (Duo/2400 List) > Date: Tue, 10 Apr 2001 11:21:04 EDT > To: <[EMAIL PROTECTED]> (Duo/2400 List)

[Duo2400] Re: Macally USB Card with 2400

Thanks Jay...one question...I downloaded Card Support 1.4.1 but when I hit install I'm told it wasn't designed for my machine and therefore won't install. Any tips on getting Card Support 1.4.1 up and running on a 2400? Jay >Subject: [Duo2400] Re: Macally USB Card with 2400 >From: Jay <[EMAIL

[Duo2400] Re: stylewriterII print driver...

Pretty sure its Control-Command AND Option. It will beep if you have the successful combo. Jay on 4/10/01 11:52 PM, Tom Rymes at [EMAIL PROTECTED] wrote: > If you hold down the option key and open the chooser, the serial ports will > be reset. It might be the command key, it might be both toget

[Duo2400] Re: stylewriterII print driver...

on 4/10/01 7:18 AM, Philip Rogosky at [EMAIL PROTECTED] wrote: > I wouldn't be surprised if it is appletalk getting in the way. since i never > network this duo with other computers (though i would like to be able to > send e-mails) could i just get rid of appletalk altogether (or would that > i

[Duo2400] Re: can't find SMTP server error?

> Date: Tue, 10 Apr 2001 13:18:02 +0200 > From: Philip Rogosky <[EMAIL PROTECTED]> > > > Did you enter the correct DNS-server(s) in the TCP/IP control panel ? > > > > Luc > > No, but then on my ibook i didn't either, and oe still worked fine. in fact, > i thought that telling the tcp/ip panel t

[Duo2400] Re: Problems with latest iCab?

>Is it just me, or are others having problems with iCab pre-2.4 for the >68040? After pre-2.3, I pretty much got used to using iCab for 90% of my >surfing, but now pre-2.4 *always* crashes with a Type 1, Type 2, or Type 3 >error after a few minutes. Try Opera - it's wonderful!! Easily the best.

[Duo2400] Re: Energy Saver Problem--Solved

I think you're playing with fire by not doing the install properly. my 2c, Jay on 4/10/01 8:59 PM, Michael J. Granado at [EMAIL PROTECTED] wrote: > So what I did was SCSI Disk the > 2400 to my desktop and installed the 8.5 CD that way. -- Duo/2400 List, The friendliest place on the

[Duo2400] Re: can't find SMTP server error?

> Da: Luc Verhelst <[EMAIL PROTECTED]> > Did you enter the correct DNS-server(s) in the TCP/IP control panel ? > > Luc No, but then on my ibook i didn't either, and oe still worked fine. in fact, i thought that telling the tcp/ip panel to get all the info from the server (to "use server ppp")

[Duo2400] Re: stylewriterII print driver...

> Da: [EMAIL PROTECTED] > There is also a software download from Apple about Stylewriter > software for PowerBooks, but I don't remember exactly what it does. Maybe > this will help a little. > P.S. The software is Stylewriter II 1.2 > http://asu.info.apple.com/swupdates.nsf/artnum/n10985"> ok

[Duo2400] Want to buy a Powerbook 2400 floppy drive cable

Does anyone have an extra floppy drive cable for my Powerbook 2400c? My only requirements are that you are sure that it works and that it has to be in good physical condition. Thanks... Michael -- From: Michael J. Granado <[EMAIL PROTECTED]> Date: Tue, 10 Apr 2001 02:50:29 -0700 To: <[EM

[Duo2400] Energy Saver Problem--Solved

Thanks guys, I just didn't know about 8.6 having having the energy saver extension incorporated into it. Basically, I recently installed a new OS into my just recently purchased 2400. I wanted 8.6 OS, but only had 8.5 on CD and an 8.6 updater on my desktop mac. So what I did was SCSI Disk the 2400

[Duo2400] Mac OS 9.1 USB printer share

I have my Canon C635 USB printer hooked up to my iMac and am attempting to print from my PB 2400 using the 9.1 USB printer share, but keep getting error 17. Any suggestions would be appreciated. Dallas -- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans o

[Duo2400] Re: stylewriterII print driver...

> Date: Tue, 10 Apr 2001 00:23:26 +0200 > From: Philip Rogosky <[EMAIL PROTECTED]> > > just tried printing something from my resuscitated duo 230 (sys > T-7.5.3>7.5.5) on my old stylewriterII, and curiously enough, the print > monitor says the printer isn't answering (during the printer identific

[Duo2400] Re: can't find SMTP server error?

> Date: Mon, 09 Apr 2001 22:44:49 +0200 > From: Philip Rogosky <[EMAIL PROTECTED]> > > finally got the li'l ole duo230 on-line (thru an external > suprafax 288). > thought i'd send an e-mail. filled in the account settings > for musashi and > eudora light using the same bits of info that i used