Todd,
You need to load the device drivers so it shows up as a com port. Then, you can
double click it, go to the Port Settings tab, click advanced and set the com
port you want to use.
Regards,
Jesse, KA8YYZ
--- tstr...@charter.net wrote:
From: "Todd"
To:
Hello Eric,
I don't own that printer, but possible there is a margin setting in the printer
driver. Check the printer properties.
73,
Jesse, KA8YYZ
--- ericrosenberg...@gmail.com wrote:
From: Eric Rosenberg
To: DX4Win Reflector
Subject:
Ron,
Close your log. Open the QSL Manager database, and make an entry with no
manager. Use a date prior to your QSO. After that, it should show up without
the manager.
73,
Jesse, KA8YYZ
--- wb3...@verizon.net wrote:
From: WB3AAL wb3...@verizon.net
To: dx4win@mailman.qth.net
Subject: [Dx4win]
Also, in the same tab, set DX Alerts to None.
73, Jesse, KA8YYZ
--- sv1...@otenet.gr wrote:
From: Kostas SV1DPI sv1...@otenet.gr
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] PSK Question
Date: Tue, 27 May 2014 22:34:51 +0300
in filepreferences go to Packet1 tab.
In Audio/Voice box, select
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
All,
Having issues posting. This is a test.
Thanks,
Jesse
_
Netscape. Just the Net You Need.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
Hello all,
Since I moved, I have to start Worked All States over, due to the 50 mile rule.
So, I went in the awards preferences and changed the start date for all WAS
awards to the date I moved. However, when I pull up a summary, I get
infromation from the start of my log.
Why does it not
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Hugh,
After you do an upload, go to Find Call and search your call? This option says
it is the callsign's last upload. I haven't tested this myself. I'm waiting
until the backlog clears before I do an upload again.
73 and Merry Christmas to all,
Jesse, KA8YYZ
--- dx4win-requ...@mailman.qth.net
Hugh,
After you do an upload, go to Find Call and search your call? This option says
it is the callsign's last upload. I haven't tested this myself. I'm waiting
until the backlog clears before I do an upload again.
73 and Merry Christmas to all,
Jesse, KA8YYZ
--- dx4win-requ...@mailman.qth.net
Hugh,
After you do an upload, go to Find Call and search your call? This option says
it is the callsign's last upload. I haven't tested this myself. I'm waiting
until the backlog clears before I do an upload again.
73 and Merry Christmas to all,
Jesse, KA8YYZ
--- dx4win-requ...@mailman.qth.net
Tom,
Check in Preferences, on the Packet1 tab, that the Cluster interface Type is
set to regular and the COM Port is set to TCP/IP.
73,
Jesse
KA8YYZ
Message: 1
Date: Thu, 2 Aug 2012 22:59:50 -0700 (PDT)
From: Tom Horton k5...@sbcglobal.net
Subject: [Dx4win] No telnet connection
To: DX4WIN
Steve,
I have DX4WIN version 8.05 installed on both Win7-64 bit and 32-bit. Runs
with no problem. If you use the LPT port for CW keying you have to install a
driver (No experience her, as I use my keyer and paddle).
Install was no problem in the default folder. If you try to install in the
Hello Toshimi,
I have not tried the QRZ database installed locally, but you may want to try
installing it in another location besides Program Files x86). All of the
Program Files folders in Windows 7 have the browse option set in the security
tab to EVERYONE - DENY. This may be your problem.
14 matches
Mail list logo