Hi all!
A couple of weeks ago I had a major issue on all Endian boxes as the
ClamAV database was corrupted and had to manually be reseted.
It was reported here by some users along with a fix.
Did you all experience the same problem again yesterday?
If you are wondering why you arent getting any
ults.
Is there any place in Endian where "NAT information" is stored
temporary? I apologize for the lack of a better description :-)
Vassilis
Vassilis V. wrote on 07.11.2010 22:51:
> I saw that 2.4.1 no longer has the SIP proxy, I hope that Christian
> Graffer can give me some m
I saw that 2.4.1 no longer has the SIP proxy, I hope that Christian
Graffer can give me some more information about that. The same problem
seems to be also when I connect my Siemens VoIP phone directly to the
providers. The registration is successful but after a reconnect, its lost.
Strangely en
Hello all!
I am trying the past day to figure out a strange problem with my Endian
(2.4) and my new Asterisk box. The Asterisk used is a PBX-in-a-flash
using the FreePBX Web Interface.
I have configured all SIP trunks (4 in total) and the extensions,
outbound rules and inbound rules. Everything
Thank you for keeping us informed Christian!
Is there any way to get some information to why the SIP Proxy was removed?
Vassilis
Christian Graffer wrote on 03.11.2010 20:36:
> We will do!
>
> However, as you may have read in the mailing *only updates* for existing
> installations have been announ
The RESPIN version is definitely 2.4. It was released a few days after
2.4 was released due to some bugs that were found and fixed.
AJ Weber wrote on 03.11.2010 18:38:
> I don't think "RESPIN" means 2.4.1 at all. In fact, the embedded date in
> the download filename leads me to believe this is
Hi Jonas,
First of all, I have no idea how to help you in your question about
PCMCIA/PC support. There was a similar problem with the USB support
where people were asking if it was removed and why on 2.2 and 2.3 (
check: [Efw-user] USB HID drivers on Endiian 2.2rc3)
The result of the USB discus
Hello Enrique,
good to hear you made such good progress!
> A) I had to connect WRT54G2 to GREEN using a common lan port and cable
> (using WAN port doesn't work). What should I re-configure for
> connecting (if necessary) WRT to GREEN using WRT's WAN port?
Why do you want to use the WAN port? Yo
Hey Enrique,
> 1) I did the connections you suggested. Connected RED nic to DSL Modem
> and GREEN NIC to WRT54G2's WAN port. After I did this connection I
> can't access EFW, so I guess I'll have to go back, configure EFW and
> then make connection again, right?
If you connect the Green NIC to th
I just did some more testing and I can confirm it works also for 2.4
As Derek mentioned, some minor changes need to be made to the jail.conf
to get the notifications going.
Since I was interested to extend the feature to also ban openvpn
connection tries, I think I managed to get it done.
Here
Hello Jaroslaw,
this is an awesome feature, thank you very much!
Do you think it would work on 2.4 aswell?
Regards,
Vassilis
Jaroslaw Zdrzalek wrote on 23.07.2010 12:18:
> hi,
>
> recentry a customer asked me to stop that annoying brute force attacks
> to the ssh console. There are diffrent ways
Hello all!
I have a green network behind an endian 2.2 with the IP range
192.168.0.0/24 and OpenVPN server running. Everything is working as it
should but I have problems when a roadwarrior connects that is behind
the same IP range. The simplest solution is to change the IP range to a
less "de
If you want to start with the simplest thing, then:
"Have you tried turning it off and on again?" :-)
Try first and see if you get any internet when connecting a PC directly
to the Fritz Box. At least if all are working until there, you can rule
out being a problem of the fritz and/or its cable
I finally found the solution. Apparently in 2.3 the raid support for
this card is not enabled!
Solution found here:
http://efwsupport.com/index.php?topic=1366.0
This is how I fixed it. I did ran the installer again and when the setup
is asking for the network parameters (last step in setup) you
Hello Zola,
just looked at the settings and all that stands there is:
grub edit>root (hd0,0
Vassilis
Zola wrote on 03.04.2010 23:59:
> Hi!
>
> Maybe a wrong root kernel options in grub?
> sometimes hard drive "orders" sda, sdb confused in grub.
>
> what is your grub kernel options?
> you can
I just tried setting it to 32 and did a reinstall. Unfortunately the
same error came up on booting :-(
Any other idea?
Vassilis
compdoc wrote on 04.04.2010 00:08:
> Set it to 32. And then see if it boots, but you might need
> to reinstall the OS after setting it.
>
> Most boards default to 64, b
> In the motherboard's bios, is there a setting named PCI
> Latency Timer? In some systems the setting appears in one
> location. But in one Supermicro server board I have, each
> PCI and PCI-e slot has independent settings for the Timer.
Hello compdoc, thank you for the quick reply!
Yes, the set
Hello all!
I am having problems starting Endian 2.3 Community Edition on a 3ware
9650SE-2LP Controller. The installation finishes without any problem but
once the system boots the error message is:
Uncompressing Linux... Ok, booting the kernel.
Mounting tmpfs on /dev
mkrootdev: UUID x
m
Hello Matt,
I have used the OpenVPN options of Endian for a while, on 2.2 only
though. I hopefully can give you some information:
> 10.0.0.0/8 (School Campus LAN)
>|
> Main Endian Firewall
>|
> {The Inernet}
>|
> Offsite Endian Firewall
>|
> 192.168.33.0/24 (Remote Classroom LAN)
te on 20.03.2010 17:54:
> On Saturday 20 March 2010 17:46:07 Vassilis V. wrote:
>> Hello Volker
>>
>> Try under System-> Network Configuration. Its the same process you did
>> when you first configured the firewall, there you will have the option
>> to assign
Hello Volker
Try under System-> Network Configuration. Its the same process you did
when you first configured the firewall, there you will have the option
to assign the NIC to the Zone you want. The Network->Interfaces menu is
only to add a new red zone if I remember correctly.
Vassilis
Volke
een if it's supposed to be an internal PBX server. Orange if it's
> supposed to be a public one.
> --
> Rafael Fonseca
> www.nunca.com.br <http://www.nunca.com.br>
>
>
> On 9 February 2010 10:43, Vassilis V. <mailto:bigracc...@gmx.net>> wrote:
>
&g
Hello all,
I successfully managed to get an Asterisk running behind my Endian
firewall. All installation/configuration was done while in the green
zone so I have as little network configuration needed as possible while
setting it up.
Now thats its all working, my question is, what zone is the
Hello all!
I have the following setup: Two Endian firewalls are connected through
OpenVPN (Gw2Gw) and everything is working nicely. I can connect
additional roadwarriors to the Endian1 and there is also everything
good. As soon as I try though to connect a roadwarrior to Endian2, the
connectio
"
> - "Use a TAP device"
> in "IPv4 Settings" > "Routes"
> - "Use this connection only for resources on its network"
>
> Leave default configurations for the rest and enjoy!
> Luca
>
> PS: There is an option called "Con
>
> http://openvpn.se/files/howto/openvpn-howto_run_openvpn_as_nonadmin-Rev1.1.html
>
>
>
> Cheers,
>
> Jx
>
> On Wed, Oct 14, 2009 at 6:41 PM, Vassilis V. <mailto:bigracc...@gmx.net>> wrote:
>
> Hello all!
>
> I setup the Ope
Hello all!
I setup the OpenVPN server on Endian and it works great.
What I want to change now, is that I always need to input my
username/password on connecting to the VPN. I would prefer to have it
always automaticly connecting on boot. Would someone be so kind and give
me some tips on how to
27 matches
Mail list logo
