Well I just placed the order for the SubRX today so I should be getting
that cable in the box. Here's hoping that all goes well with the
install as I won't have much time to get replacement parts from Elecraft
before FD if there are any issues.
On Mon, 2009-06-15 at 08:52 -0700, Bill W4ZV wrote
Appreciated... I've been off the reflector for a bit and just haven't
been paying very close attention... Glad to hear there are no unforseen
issues with that...
On Mon, 2009-06-15 at 04:31 +0100, David Ferrington, M0XDF wrote:
> lots of people have done that.
> 73 de M0XDF, K3 #174
> --
> Powe
Due to the large amount of spam received at this email address, (
sheldonhow...@gmail.com) I will discontinue using this address immediately.
I am requesting you, and a select number of other important correspondents,
to change your database, directory, address book etc., and send all future
email
wayne N6KR wrote:
> And yes, there will be per-mode RX EQ in a future firmware revision.
> Thanks for all the suggestions on this.
>
>
As long as you're still reading suggestiosn on per-mode RX EQ for the
future,
I think it'd be really fascinating to see RX EQ combined with AGC for
data modes
Have you enabled all the wide roofing filters in CW mode?
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dennis Watkins
Sent: Sunday, June 14, 2009 11:08 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] CW au
I'd like that option too... blue would be nice, or if it were an led backlit
option, one could choose the color of led maybe?
--... ...--
Dale - WC7S in Wy
_
Insert movie times and more without leaving Hotmail®.
http://wind
Looking to get a 1.8Khz 8-pole filter if anyone has one they are looking
to part with. Please email me directly... I'd buy it from Elecraft but
they are out and I'd like to have it so that when i put in the KRX3 I
just ordered from them will be 100% matching and ready to go for FD.
Ever since I w
We do fully support this through software.
Email k3supp...@elecraft.com requesting the TX limit removal program. (Its a
'one-time' run program.) Please include your callsign and K3 s/n.
It is the individual ham's responsibility for all rig modifications they make
and to insure that they operat
Hi Bill and thanks for the reply.
I'd like tuning as usual in 10 kHz steps, but would like to able to shut off
the display of the 10Hz digit.
Best regards,
Dick - KA5KKT
-
-Original Message-
I tune to Khz.zero's and then use the Fine/
Hi Bill,
If the sub receiver is installed but turned off, the K3's current
consumption in receive mode should be around 1 to 1.2 amps depending on
other installed options, supply voltage, etc. At 5 watts in transmit
mode, current drain will be around 3 to 4 amps.
A 15-watt solar panel would ju
Hi Wayne,
I would like to use my K3 for Field Day again this year. I have installed the
sub receiver and am concerned about my power budget. I use a 15 watt solar
panel to charge a battery and find that the K3 is now drawing over an amp on
receive. Is there any simple way to disable or turn off
I tune to Khz.zero's and then use the Fine/Coarse settings to accomplish
what I think you are asking for.
73,
Bill
K9YEQ
K2 #35; KX1 #35; K3 #1744; mini mods
ATS-3B
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Edward D
Wayne,
Oh so quickly the forecast comes true may I eat humble pie regarding the
earlier comments about features. A separate RX EQ for CW and SSB might be
really useful. I listen to CW with a low pitch close to 310 Hz and being
able to further attenuate high frequencies above 800 Hz might be
> Igor Sokolov wrote:
>>> My issue is that I use SPKR+PH most of the time, so I can listen
>>> having to have my headset on, but put it on when I want to transmit.
>>> Ideally, I'd like to get the monitor audio in the headphones only, and
>>> not in the external speakers (which produces feedback).
Lately there has been some discussion about how much gain to add when
compensating for loss in the K3's individual crystal filters. The
general guideline is "as little as possible." I'd suggest starting with
0 and working up to as high as a few dB only if it seems necessary.
Narrow bandwidths t
One of the complaints regarding the Orion 2 was that it took an engineer to
use it. A good friend was advised by a top operator in ARRL that he might
better consider a PRO 3 than the Orion 2 which was too complex. The idea
that the Orion 2 was to complicated is a falsehood but the rig took time
Igor Sokolov wrote:
>> My issue is that I use SPKR+PH most of the time, so I can listen
>> having to have my headset on, but put it on when I want to transmit.
>> Ideally, I'd like to get the monitor audio in the headphones only, and
>> not in the external speakers (which produces feedback). As i
It seems to be the way of life that one person's requirement to "add
more salt" run's head long into another's view that "it's quite salty
enough".
With so many cooks suggesting new seasonings, it's a wonder the
Elecraft team has kept the soup flavored so well :-)
Grant/NQ5T
On Jun 15, 20
Experience has shown me that I can more easily tune to a desired frequency
that is 'kHz.000' without the visual distraction of the 10Hz digit. Is it
possible to create a setting whereby the 10Hz digit can be shut off from
view as the 1Hz digit can be via the FINE button? E.g.. kHz.0 vs. kHz.00 o
> My issue is that I use SPKR+PH most of the time, so I can listen
> having to have my headset on, but put it on when I want to transmit.
> Ideally, I'd like to get the monitor audio in the headphones only, and
> not in the external speakers (which produces feedback). As it is, I have
> to remember
Hi Steve. Apparently there has been a problem with the messages to me from
the LP-PAN Yahoo Group, so this digest is the first I am aware of your post.
Sorry about that. I think it has been resolved now.
It sounds like you may have to check your gain setting in LP-PAN, as well as
the input level
Another vote for this feature request. It seems it should be feasible
to add a MENU:MONITOR On/Off toggle, which could then be applied to
one of the programmable function buttons. Of course Wayne has a list
as long as his arm of "little things" like this, so don't expect it
overnight, but if there
On Mon, Jun 15, 2009 at 12:10 PM, WILLIS COOKE wrote:
>
> But, you don't get the BNC connector and cable until you get the KRX3.
Which is why I said:
> I don't recall the part number for the AUX RF TMP cable
> > assembly normally
> > supplied with the KRX3 but Elecraft will know what you mean
That is a very interesting project, and I am sure you really enjoyed
creating the box.
The KRC2ACC is expressly designed for this purpose. It reports almost
all K2 information through CW, and has many key functions to let the
op know just what is going on with the K2 and to maintain better
But, you don't get the BNC connector and cable until you get the KRX3. I don't
remember having any trouble routing the cable when I installed the KRX3 months
after building the K3.
Willis 'Cookie' Cooke
K5EWJ
--- On Mon, 6/15/09, Bill W4ZV wrote:
> From: Bill W4ZV
> Subject: Re: [Elecr
Brett Howard wrote:
>
> I think for most normal operations I want to use the KAT3 port for the
> Aux antenna jack for my KRX3 but I'd like to have the option of using
> the AUX RF port without too much hassle. Does anyone see any reason why
> one would have any problems mounting the BNC jack a
One of my HAM friends is white sticker. He would be happy to get a K2 usable
for portable operation without any PC. I posted his problem to the German
QRP Forum, asking for help. My idea was to get an ASCII / CW Interface KISS,
the number of keys kept as low as possible.
Norbert DK6NF very fast de
I would be interested in converting the display in my K-2 to the now popular
blue display available in many radios, including the vintage Drake line as well
as some of the modern transceivers. Anyone try this yet? Where did you find
the parts? Many thanks, and I enjoy reading the helpful pos
Steve,
Although a long shot, among the possible causes of your problem is a
defective roofing filter, defective in terms of signal handling capability
but otherwise OK.
To eliminate this possibility, have you tried switching roofing filters with
the LP-Pan disconnected?
73,
Geoff
GM4ESD
---
And remote operation so the amp doesn't have to be in the shack like an Acom
2000A. Saves on heat and space in the shack.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Miller KG0KP
Sent: Monday, June 15, 20
> Further to Joe's suggestion: I've heard of a strong local signal being
> rectified in rusty guttering giving problems to a beam in just one
> direction. Took years to find that one.
Reminds me of something which happened many years ago here in Southern
Germany.
The interference monitoring an
We should remember that K3 sells globally and a transmitter which could work
outside the amateur bands might cause problems in some countries. It is my
understanding that even as things stand Thailand will not allow the use of
the K3 by their amateurs. Lets not forget that the FCC limits the re
>Hi Folks,
>How to unblock the TX in K3 for transimiting out of HAM freq ???
Ahoj,
It's not possible to unblock TX outside the ham bands by h/w mod.
In my oppinion there is s/w lock in the standard firmware of the K3.
I can recommend to contact Elecraft support but I am not sure if the
unblockin
33 matches
Mail list logo
