Hey Gang!
I finished my K1 this evening! All seemed well until I went to install the ATU
(KAT1).
During initial test (p.9), I put the ATU mode into F1.3 and then exit out. I
press WPM- & WPM+ to tune and the display reads P2.3 instead of the r8.5 that's
expected. In the troubleshooting, guid
Can someone at Elecraft comment on the shipment of the first P3's?? Are we
truly just under two weeks for the first ones, or has a setback occurred??
Inquiring minds with orders in place would like to know.
Thanks for all you do,
Don, WB5HAK
_
Question about adjusting the "volume" level (aka monitor level) of the SW
(switch) tone indicator. The monitor level seems to be associated with the CW
monitor level. That is, whatever level I set for my CW sidetone, that is what
is used for the SW Tone. So, is this true?
I would like to be
Jeff,
You probably elected NOT to see your own posts to the list when you
subscribed.
Go to http://mailman.qth.net/mailman/listinfo/elecraft and enter your
email and password - then you can edit your settings - the one you want
is the 4th in the list.
73,
Don W3FPR
Jeff Cochrane - VK4BOF wrot
Andy,
That trace cut was not to be done on a new K1 RF board. You will have
to remove the resistors and capacitor and repair the trace cut with a
jumper wire. Check page 7 - the "i in a triangle" informational item
near the bottom of the page - it says to skip the next 5 steps if your
board
Hi Don,
I just checked and the option to see my own posts is turned on. (It defaults to
on)
I am advised by Sam K5OAI that it may be a GMail issue and there isn't alot
that can be done about it.
Having said that, it has also been the case with various other lists where I
was not using GMail that
As expected, you are absolutely correct! I owe you ANOTHER one.
K1 #2897 is alive, thanks to W3FPR!
--
From: "Don Wilhelm"
Sent: Saturday, July 03, 2010 9:01 PM
To: "Andy Engle"
Cc:
Subject: Re: [Elecraft] KAT1 Install Troubles
> Andy,
>
> Tha
I'm a definite "rightie" but my radio was always on the left. My TS-870 is
still in that position and the K3 is on the right. After rotator cuff surgery
on the right side I started to use a mouse with the left and when my right gets
sore, I still do, without any fuss.
I can't write with my le
It could be Gmail afterall. When my ISP changed to using gmail I
stopped receiving copies of my posts to any of the lists I subscribe
to. I called tech support and they said it was done by gmail and
they couldn't change it.
73,
Bob Nielsen N7XY
On Jul 3, 2010, at 7:11 PM, Jeff Cochrane - V
101 - 109 of 109 matches
Mail list logo