If this Reflector is anything to go by, Bill, there are lots of LIDs
that own a K2 and/or a K3, etc. :-(
In a recent message, Bill VanAlstyne W5WVO w5...@cybermesa.net wrote..
I cannot imagine that any LID would own a smart, excellent radio like the
K2... Will probably be very hard to find such
Hello all,
I have finally gotten to the final stretch of construction and have hit another
snag. I had gotten the power out on all bands correct and was starting to align
the filters when the VFO went out. I reworked the solder joints looking suspect
on all 3 boards with no good results. I did
Dan,
It sounds like your PLL Reference oscillator quit working - so ---
Tackle Q19 first. Check the resistance from the source to ground -
should be close to 270 ohms. If not, check the soldering on R20 and
both the lead tinning and soldering of RFC14.
Once Q19 is OK, then you can go on to
David Pratt said: If this Reflector is anything to go by, Bill, there are
lots of LIDs that own a K2 and/or a K3, etc.
Your comment was degrading to the people on this reflector. I earned my ham
ticket in 1951 and since then I've strived to improve my operating
capabilities and knowledge. One
~
N2CQ QRP CONTEST CALENDAR
August 2010
~
Summer FOX Hunt - QRP 20M CW... QRP Contest!
EDT: Each Tue, 9 PM to 1029 PM
UTC: Each Wed, 0100z to 0229z
Info:
Jeez...takes all kinds I guess! A sense of humor seems to be going the way of
the dinosaur.
John Harper
http://www.ae5x.com/blog
Fred, AE6IC:
Your comment was degrading to the people on this reflector.
__
Elecraft mailing list
Home:
The Winlink web site was down for a couple of days.
It was reported in the Winlink Yahoo Groups and other sources. It's been back
up since sometime yesterday.
Jon
KB1QBZ
__
Elecraft mailing list
Home:
At a local hamfest Saturday, one of the field testers had the P3 on display. I
was very impressed with it, in fact the photos don't do it justice. Colors are
very bright and signals are shown in great detail. I think it will be a real
winner --- hopefully they will be shipping the product
The importance of a control for display brightness on the P3 is an important
feature that could easily be overlooked.
Does it have one?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi All,
should I be worried about taking my K2 where I would take my 857 0r 817?
I really want to but I am more protective of it, its knobs and BNC
connectors
How do they hold up to adventuring?
-Neil
__
Elecraft mailing list
Home:
Thanks to Wayne and Eric for letting me post this here !!
Good Morning Gang,
I have recently come into possession of several hundred 5ah gel
cells. So, as a summer job for my son, these are being charged, load
tested, and offered for sale here on the List. Amazon et al want
about $12
Neil,
The K2 is actually quite sturdy. The enclosure is difficult to damage
when all the screws are in place, and the electronics are certainly not
physically fragile short of something that would damage the board.
You are correct that the most vulnerable items are the BNC connector(s)
and
Yes, display brightness is variable.
Great! Leave it to Elecraft to come up with a sensible design...
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Anyone using a K3 with a Rig Blaster Pro for FSK? Intersted in wiring from
RB.PRO to K3..
Thanks, Peter/W4ZGR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Yes, display brightness is variable.
Tap Menu, rotate the knob to set display brightness and tap the knob.
Rotate the knob to the desired brightness, tap the knob.
You may also assign one of the FN buttons to the menu selection if you tend
to change brightness frequently.
Dick, K6KR
Sounds good. Yes the mouse with LP-Pan has me spoiled. My mouse is a
wireless Logitech with the HyperScroll feature which basically turns the
scroll wheel into a flywheel tuning knob. Just a quick flick and it coast
across the band! P3 really needs one.
Steve
N4LQ
- Original Message -
Which of the options/upgrades should be installed for the P3 to function at
optimum capability?
Is it the KIO3 bd and what is the effect of trying to use the non-upgraded
board?
Was this the bd that can be ordered on swapout or should I send in mine to be
upgraded? How long does it take?
You may wish to install the IF Output Gain modification,
http://www.elecraft.com/K3/mods/IF_Output_Buffer_Gain_Mod_Rev_A.pdf. This
mod has already been installed if your rig was built after about September
2009.
It isn't essential, but you'll probably want to do this if you have a P3.
The mod
Dick,
Good idea, but I'm not sure it is necessary. I used a prototype P3 in WPX
CW in May at P49Y with my K3, serial 0076, which does not have the mod. Now
this was in a contest, and I wasn't particularly looking for the weakest
signals, but it did seem to interface fine with the older K3,
Yes. Brightness is fully adjustable.
It also easily tunes signals with its point and click tuning knob.
Actually faster than a mouse for me.
73, Eric WA6HHQ
On 7/27/2010 9:36 AM, Andrew Moore wrote:
The importance of a control for display brightness on the P3 is an important
feature that
I have used the K3 with a lot of sound card programs and logging
programs but today I ran into a problem using Fldigi.
In using the Fldigi(digital sound card software) I noticed something
today. I could not get it to communicate with my K3 #3423 but I could
get Fldigi to communicate via RS-232
Hello Elecrafters,
This situation has been taken care of.
The need has been satisfied.
73, Skip WB4DAD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I would sure like to see a video of how that point and click knob is faster
than a mouse then maybe I'll understand. Does someone out there have a cam?
Steve
N4LQ
- Original Message -
From: Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com
To: Andrew Moore andrew.n...@gmail.com
Cc:
If the LP-PAN window is fully visible and not covered up by other windows, I
find it hard to believe that the knob can beat the mouse. But, as is often
the case, my LP-PAN window is fully or partly hidden and I can believe the
extra click needed to bring it in focus might just be enough to lose
Wouldn't the ability to have the rig QSY just staring at the position on
the P3 screen be neat.
73 de Brian/K3KO
ab2tc wrote:
If the LP-PAN window is fully visible and not covered up by other windows, I
find it hard to believe that the knob can beat the mouse. But, as is often
the case, my
You shouldn't even have to go THAT far. The radio should be capable of fully
autonomous mode ... think of it as a Roomba sweeping up contacts for the
contest instead of just .. ahhh ... dirt. Bouncing off of and changing
direction at band edges, seeking multipliers, ignoring stations
Yes,
Alan
On Tue, 2010-07-27 at 12:36 -0400, Andrew Moore wrote:
The importance of a control for display brightness on the P3 is an important
feature that could easily be overlooked.
Does it have one?
__
Elecraft mailing list
But the BIG question, does anyone have a P3 for sale (wink, wink)?? HI
73,
Don, WB5HAK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On Tue, 27 Jul 2010 21:42:36 +, Brian Alsop als...@nc.rr.com
wrote:
;o)
Tom, N5GE
K3 #806 with SUB RX, PR6,
KRC2 and K144XV
K3 #1055 with PR6 and XV432
W1, 2 W2's and other small kits
QCWA Life Member 35102
n...@n5ge.com
http://www.n5ge.com
http://www.swotrc.net
Wouldn't the ability to
Knut,
Have you tried the 'Collapse' button at the top of the PowerSDR screen? It
reduces the display to a simple small panadapter without all of the rig
controls.
Don K7FJ
-
But, as is often
the case, my LP-PAN window is fully or partly hidden and ...
AB2TC - Knut
30 matches
Mail list logo
