Re: [Elecraft] [P3] Display bug ...

Thanks Bill. 73, ... Joe, W4TV On 8/8/2010 10:14 PM, Bill W4ZV wrote: > > > Joe Subich, W4TV-4 wrote: >> >> >> >> There is a repeatable problem in the P3 display of the "bandwidth" >> cursor in AFSK A and FSK D data sub-modes. In both submodes the >> VFOs (correctly) display the RF freque

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

> Do you know how the P3 is implementing the "transparency"? Only that it appears to implement it with all of the software I've tested (except for LP-Bridge obviously). > Why do you feel it necessary to prejudge? Who is prejudging? If other software operates normally while LP-Bridge which ha

[Elecraft] P3 Unexpected Control Operation ...

Rotary controls in the K3 and P3 increase their parameter as the encoder is turned clockwise except in two cases. 1) The P3 "REF LVL" is decreased with clockwise rotation. Maximum reference level is -10 dBm with the encoder fully counterclockwise while it is minimum -160 dBm with the enc

[Elecraft] Elecraft CW Net Report for August 8th & 9th, 2010

Good Evening, Twenty meters was fairly quiet yet it provided strong signals. Two CT stations both of whom sounded very good. However, I wonder where everyone else has gone? Maybe the long spate of unfavorable propagation has forced them into other endeavors. Maybe a bit of advertising dur

Re: [Elecraft] [P3] Display bug ...

Joe Subich, W4TV-4 wrote: > > > > There is a repeatable problem in the P3 display of the "bandwidth" > cursor in AFSK A and FSK D data sub-modes. In both submodes the > VFOs (correctly) display the RF frequency of the MARK (as set by > "Pitch"). However, the P3 displays the filter limits as

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

Even with the latest version of LP-BRIDGE (9.8), I continue to experience some rig time outs. All occur during periods of transmitting where one does not drop back to RX during that period. Direct connect without LP-BRIDGE shows none of these. They happen even with the K3 throttled back to 5

[Elecraft] [P3] Display bug ...

There is a repeatable problem in the P3 display of the "bandwidth" cursor in AFSK A and FSK D data sub-modes. In both submodes the VFOs (correctly) display the RF frequency of the MARK (as set by "Pitch"). However, the P3 displays the filter limits as if the mark frequency were always set to 91

Re: [Elecraft] K2 SSB ALC Problem

Hello Don, thanks a lot for taking you time! I have SSB-A set to 1 but I can get a lot ALC action very easily. My KSB2 Board is a Revision D with firmware 1.08 and there is no additional transistor around U5 on the top or the bottom side of the board. I do have an KPA100/KAT100 in an EC2 enclos

Re: [Elecraft] K2 SSB ALC Problem

Sanjin, What setting do you have for the SSBA menu parameter - for the MH2, it should be set at 1. Does your K2 have any additions to the KSB2 board, such as the KI6WX increased gain mod? If you don't know, open the K2, remove the KSB2 board and check for an additional transistor mounted on t

[Elecraft] More Fun with the P3

Watching the P3 while listening to DX operating split and using the second receiver to listen to the pile-up, for the first time, is a technique that everyone told me would be nice but I wasn't prepared for how easy and effective it turned out to be. Everyone knows how to set up the K3

[Elecraft] LEARNING CW

Yep, a few of them are still with me like: CQ and SK and TEST and RST and NAME...pretty good since the last time I operated CW for any extended time was in 1958-1959 as a novice! But you have hit on what my problem is -- No parallel processor! ;-) MY wife can rattle off at length when I am re

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

Do you know how the P3 is implementing the "transparency"? Why do you feel it necessary to prejudge? Oh, right ... 73, Ted, W2ZK On 8/8/2010 8:07 PM, Joe Subich, W4TV wrote: > > > Nevertheless, it's not transparent. > > Depends on one's definition of "transparent." It appears to work with > e

Re: [Elecraft] Power Supply

Phil: In this case, may I refer you to the hearing aid thread? Steve N4LQ - Original Message - From: "Phil Kane" To: "Elecraft" Sent: Sunday, August 08, 2010 8:06 PM Subject: Re: [Elecraft] Power Supply > On 8/8/2010 11:46 AM, Joe Planisky wrote: > >> I've resolved that I simply wil

Re: [Elecraft] recieved signals ringing

What are you running with NR, NB, what bandwidth, roofing filters, etc? 73, Guy. On Sun, Aug 8, 2010 at 5:56 PM, W2XB wrote: > > hello group, > Noticed the past couple days that when I tune on a cw signal on my K3 (all > updates) and go to the top edge of the signal its tone starts to rise until

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

> Nevertheless, it's not transparent. Depends on one's definition of "transparent." It appears to work with every application I've thrown at it except for initializing LP-Bridge. To me that implies an issue with LP-Bridge - perhaps an excessive sensitivity to timing - not an issue with the P3/K

Re: [Elecraft] Power Supply

On 8/8/2010 11:46 AM, Joe Planisky wrote: > I've resolved that I simply will not buy another piece of radio > equipment that has fans. There are "fans" and there are "FANS"! I just replaced my main computer which sounded like a vacuum cleaner when it was running with a brand-new (expensive

[Elecraft] K2 SSB ALC Problem

Hi All, I have a K2 which I bought used. I never really used it on SSB but from time to time would like to. The problem is when I transmit (Mic is the Elecraft MH2) I get very hard ALC action which jumps to full ALC scale reading. I tried to "inject" (via the Mic in a quiet room) a constant mod

Re: [Elecraft] cw recieving

Thanks Fred. Don...w2xb -- View this message in context: http://elecraft.365791.n2.nabble.com/re-cw-recieving-tp5387149p5387380.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://

Re: [Elecraft] [K3] MMTTY

> This will mostly be on XP, with occasional excursions on Win7. > What does "directly selecting the endpoint" mean? I'm real new > to Win7. When you open the "Volume Mixer" in Windows 7, the "device" box has a drop down box (down arrow to the right of "Speakers" etc.) that allows you to selec

Re: [Elecraft] Elecraft SSB Net results (8-8-10)

Couldn't hear anything but S7 noise in eastern Mass. Phil and Christina wrote: > East coast stations were not very strong today, and we had no California > check-ins. Lyle using his prototype KPA500 was S9+10 into the side of my > quad - not bad for less than 300 miles! The net only ran 20 minutes

Re: [Elecraft] cw recieving

W2XB wrote: > Hello Group, > Har! getting old is not for sissies!! I was coping cw with my "new" (first > ever) hearing aids. When they are out, rx is normal. With the aids in, its > picking up the high pitch. Sorry about the wasted bandwith. I'd normally reply direct but there has been a sporadic

Re: [Elecraft] Elecraft SSB net announcement

This is a strange "long delayed echo". I sent it yesterday morning! 73, Phil NS7P -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]on Behalf Of Phil and Christina Sent: Saturday, August 07, 2010 9:16 AM To: elecraft@mailman.qth.net Subj

[Elecraft] Elecraft SSB Net results (8-8-10)

East coast stations were not very strong today, and we had no California check-ins. Lyle using his prototype KPA500 was S9+10 into the side of my quad - not bad for less than 300 miles! The net only ran 20 minutes with 26 participants. No discussion. Here is the list of the participants. Station N

Re: [Elecraft] cw recieving

Thanks Don, will wait serveral weeks and then go in for a tune up.. boy its nice to hear again... Don...w2xb -- View this message in context: http://elecraft.365791.n2.nabble.com/re-cw-recieving-tp5387149p5387306.html Sent from the Elecraft mailing list archive at Nabble.com. __

Re: [Elecraft] cw recieving

Don, Have your audiologist give you a program setting with no noise reduction. You can use it for CW as well as listening to music. Mine default to that program and stay there until I encounter a situation where the NR helps - noisy places or if there is a lot of background noise. If these ar

[Elecraft] PS with speaker

Astron makes power supplies for the two-way radio market that have speakers. 73! Ken Kopp - K0PP elecraftcov...@rfwave.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth

Re: [Elecraft] cw recieving

Hello Group, Har! getting old is not for sissies!! I was coping cw with my "new" (first ever) hearing aids. When they are out, rx is normal. With the aids in, its picking up the high pitch. Sorry about the wasted bandwith. Thanks Don...w2xb -- View this message in context: http://elecraft.3657

[Elecraft] recieved signals ringing

hello group, Noticed the past couple days that when I tune on a cw signal on my K3 (all updates) and go to the top edge of the signal its tone starts to rise until its ringing like a very narrow filter. Going down in freq it does not do it. I am I missing a setting? Hope I explained this right

Re: [Elecraft] [K3] MMTTY

Rich, A very good explanation. I got 1.66G a couple of days ago. It's SO nice when a problem is solved. 73 Mike On 8/8/2010 2:04 PM, Richard Ferch wrote: > Mike, > > Both level controls use the MIC/SPEED knob. You can see the current > setting by tapping the knob twice (once for CW speed, onc

Re: [Elecraft] [K3] MMTTY

Thanks Joe. This will mostly be on XP, with occasional excursions on Win7. What does "directly selecting the endpoint" mean? I'm real new to Win7. I saw some 99 cent units on the estore. Maybe a bit TOO cheap. ;-) 73, Mike NF4L On 8/8/2010 1:36 PM, Joe Subich, W4TV wrote: > > Both use th

Re: [Elecraft] K3 memory editor printing

Thanks, Lee. Print is on my to do list but I wasn't planning to get very fancy. A spread sheet allows you to play with column sizing, fonts, colors, and remove columns that aren't of interest. Dick, K6KR Sent from my iPhone On Aug 8, 2010, at 12:40 PM, Lee Trout wrote: > I find that selecti

Re: [Elecraft] KXV3A Mod Question

DBellW6AQ wrote: > > Do I need to install the KXV3 RXA board or is that mod already in the > KXV3A? > No, it's in there already! 73, Bill -- View this message in context: http://elecraft.365791.n2.nabble.com/KXV3A-Mod-Question-tp5387040p5387077.html Sent from the Elecraft mailing list a

Re: [Elecraft] Power Supply

At the moment there's only about a 4x4x6" space available inside the P3 (unless you want to build something with a very odd form factor to fit around the pc boards). And that's "at the moment". IMX, Wayne has a habit of eventually occupying every cubic millimeter of space inside a cabinet with us

Re: [Elecraft] Power Supply

I presently have an Astron that does nicely. Like Phil, I don't care if it doesn't match the K3 because it's on the floor under the operating desk. It's linear and I have learned (the hard way at times) that other electronics can be adversely affected by the big magnetic field around the supply pow

[Elecraft] KXV3A Mod Question

Do I need to install the KXV3 RXA board or is that mod already in the KXV3A? Thanks in advance, Dave __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:El

Re: [Elecraft] Power Supply

Now thats what I was thinking. It would be a little expensive but I would pay a little more for an Elecraft quality design not to mention the powerpoles. I would want a linear power but I thought that was implied. I don't mind if it has a fan that is a quiet as the pair on my K3 and only comes on w

Re: [Elecraft] Power Supply

OK, IMHO,  I don't think a non ham device needs to be on the operating position.  I use a linear ASTRON with remote sensing of the voltage at the radio and a 5 Farad cap under the shelf and then the problem is solved.  Good clean DC and no noise in the shack. Mel. K6KBE --- On Sun, 8/8/10, Wil

Re: [Elecraft] Power Supply

How about auto fail-over to a battery backup, with recharge upon restoration of commercial power ? 73 K1NR K2 6k On Sun, 08 Aug 2010 09:41:41 -0700 Richard Hill wrote: > Yes, that would be interesting, especially if the options > included solar > charge controller and generator options--a gr

Re: [Elecraft] Power Supply

On 8/8/2010 8:55 PM, k2qi@gmail.com wrote: > Don't know about anyone else, but I'm perfectly satisfied with the > performance of my 25A MFJ switching PS. It's small, light, cheap, and noise > (electrical) free. The only caveat is its loud cooling fan. > > James K2QI > Sent via BlackBerry fr

Re: [Elecraft] Power Supply

Nicholas, That would be a fine addition. Start with 25A continuous, 30A ICAS, add a *good* front facing speaker, 2- 4 pair of Anderson power pole connectors in the rear, 1 binding post just because, an ammeter and a voltmeter, adjustable over-voltage protection with indicator, and you are there

Re: [Elecraft] Power Supply

All the fans in my station are overwhelmed by my air conditioner and heat pump. Sent from my iPhone On Aug 8, 2010, at 14:07, "Steve Ellington" wrote: > I believe those little fans are cheaper than a large aluminum heat sink. Did > you ever count how many fans are running in the average shack?

[Elecraft] K3 memory editor printing

I find that selecting and then copying my memory list in the editor and then pasting it into Excel, lets me massage it quite nicely (colors, fonts, etc.) for printing. It sure is a great way to manage memories. Thanks Elecraft. 73, Lee (K9CM) __

Re: [Elecraft] Power Supply

I believe those little fans are cheaper than a large aluminum heat sink. Did you ever count how many fans are running in the average shack? With 2 PCs and my rig, I count 9. I use the Astron linear supply to avoid yet another one. Steve N4LQ - Original Message - From: To: "Joe Planisk

Re: [Elecraft] Power Supply

Don't know about anyone else, but I'm perfectly satisfied with the performance of my 25A MFJ switching PS. It's small, light, cheap, and noise (electrical) free. The only caveat is its loud cooling fan. James K2QI Sent via BlackBerry from T-Mobile -Original Message- From: Joe Planisky

[Elecraft] Huntsville, AL hamfest 21,22 Aug

Anyone going? Bringing your Elecraft products? I might be able to attend, and have a banner, some literature, etc. Mike AI4NS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.

Re: [Elecraft] Power Supply

Couldn't agree more! I've resolved that I simply will not buy another piece of radio equipment that has fans. 73 -- Joe KB8AP On Aug 8, 2010, at 10:30 AM, Steve Ellington wrote: > No Fan please Figure out a way to cool it with heat sinks but > please no > more fans. > > Steve > N4LQ >

Re: [Elecraft] P3 Utility for Mac ?

A big thanks to all the developers of Mac ham radio software and utilities. I am in the midst of a move (physical) that was proceeded by a move (PC -> Mac). The hold up had been the availability of Mac Ham software. There are still some holes here (Weather related, like GR Level 3) but as I

[Elecraft] My K3 doesn't wear Prada...

On 8/8/2010 12:24 PM, Nicholas Farrar wrote: > Would anyone be interested in an Elecraft DC power supply? It would look > nice to have a powersupply that matches my K3! Maybe in two models. First a > QRP model super clean DC, the other a 25-30 amp model. Anderson Powerpoles > on the BACK so you don

Re: [Elecraft] [K3] MMTTY

Mike, Both level controls use the MIC/SPEED knob. You can see the current setting by tapping the knob twice (once for CW speed, once for the level setting). Right now mine reads MIC 21 when I tap it with the radio in a voice mode, and LINE 8 when I tap it with the radio in data mode. Adjusting eit

Re: [Elecraft] [K3] MMTTY

> Both use the MIC knob tho, right? Yes, but the mic knob is an encoder ... changes mic level in SSB and Line level in Data A/AFSK A if you are using Line In. The mic /line levels are maintained separately. > When you add another sound device, how do the Windows mixer > controls work? Depen

Re: [Elecraft] Power Supply

No Fan please Figure out a way to cool it with heat sinks but please no more fans. Steve N4LQ - Original Message - From: "Nicholas Farrar" To: "elecraft" Sent: Sunday, August 08, 2010 12:24 PM Subject: [Elecraft] Power Supply > Would anyone be interested in an Elecraft DC power s

Re: [Elecraft] K2 internal keyer problem

On 8 Aug 2010 at 12:09, Peter Wollan wrote: > This sounds like the K2's auto-detect feature, which allows connecting > both paddles and a straight key or computer, along with a couple of > diodes, at the same time and sending from either. If the paddles are > squeezed at exactly the same time, it

Re: [Elecraft] Power Supply

The issues in putting a linear supply in the P3 case are both the size of a transformer capable of handling 25A continuous/30A peak (or the cost of a special toroidal transformer) and the necessary heat sink area for the pass transistors. Switching supplies also have issues with heat sink area or

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

Nevertheless, it's not transparent. Maybe we should allow it to be translucent? :-) 73, Ted, W2ZK On 8/8/2010 12:22 PM, Joe Subich, W4TV wrote: > > >>> ... Maybe it is a nit on my >>> part but the RS-232 port on the P3 is supposed to be transparent to apps >>> connecting to the K3 via RS-23

Re: [Elecraft] K2 internal keyer problem

This sounds like the K2's auto-detect feature, which allows connecting both paddles and a straight key or computer, along with a couple of diodes, at the same time and sending from either. If the paddles are squeezed at exactly the same time, it looks like the straight key to the circuit. If I re

Re: [Elecraft] [K3] MMTTY

Rich, Both use the MIC knob tho, right? Quickmix looks good, thanks for the link. This afternoon I'm may run down to the candy store and look at sound cards, probably a USB one. When you add another sound device, how do the Windows mixer controls work? I'd guess it works for the default de

Re: [Elecraft] K2 internal keyer problem

I have seen this on occasion with my K2. Occasionally I get a very long DAH when I key as if I have mis-keyed. Tap the DIT paddle and all is well again. I only run 5W so I don't think it is RF, I suspect a bug in the firmware. But so infrequent not to worry about. 73 Dave G3YMC K2 #2498 -- Vie

Re: [Elecraft] Power Supply

I have heard a rumour of a commonly available power supply that was installed in the back of a P3. Can anyone conform or deny this? And, if confirmed, publish photos? I suspect it wouldn't be hard to put a QRP-level PS/charge controller in the KPA3 space, either. 73, doug Date: Sun, 8 Aug 20

Re: [Elecraft] Power Supply

Yes, that would be interesting, especially if the options included solar charge controller and generator options--a green Elecraft power supply system useful for various DXpedition, emergency and home uses. Rich NU6T On 8/8/2010 9:24 AM, Nicholas Farrar wrote: > Would anyone be interested in an

Re: [Elecraft] Power Supply

Would it be cheaper and better then my Astron power supplies? My Astron's do not sit next to my K3 or any of my other equipment. Therefore, whether they match the look of a K3 (or not) is not important. But, if a kit version were produced and if it was cost comparable to other non-kit power s

Re: [Elecraft] [K3] MMTTY

Mike, On the K3, MIC level and LINE level settings are independent; you can adjust the LINE level in data modes without affecting the MIC level for voice and vice versa. Regarding changing levels in different software, you might take a look at QuickMix () - this

[Elecraft] Power Supply

Would anyone be interested in an Elecraft DC power supply? It would look nice to have a powersupply that matches my K3! Maybe in two models. First a QRP model super clean DC, the other a 25-30 amp model. Anderson Powerpoles on the BACK so you dont have wires bent around the back of the powersupply.

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

>> ... Maybe it is a nit on my >> part but the RS-232 port on the P3 is supposed to be transparent to apps >> connecting to the K3 via RS-232 and it isn't - not strictly speaking >> anyway since LP-Bridge hangs while connecting to the K3 if the P3 is >> on. I figure now is the time to get Elecra

Re: [Elecraft] [K3] MMTTY

Ohhh yeah, Been bit by that too. 73, Mike On 8/8/2010 10:53 AM, Brian Alsop wrote: > And turn off all WINDOWS alterts, sounds when operating AFSK! > > 73 DE Brian/K3KO > > Richard Ferch wrote: >> Mike, >> >> I have not found this to be critical at all, once the audio and VOX levels >> are s

Re: [Elecraft] [K3] MMTTY

Thanks Rich. Turning up the vox gain did it, and I was able to turn down the computer sound card a bit to get the ALC reading correct. I didn't want to mess with the MIC gain, because it's touchy for me to set it for phone. I'd like to turn VOX off for phone only, but that's not possible y

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

> ... Maybe it is a nit on my > part but the RS-232 port on the P3 is supposed to be transparent to apps > connecting to the K3 via RS-232 and it isn't - not strictly speaking > anyway since LP-Bridge hangs while connecting to the K3 if the P3 is > on. I figure now is the time to get Elecraft to

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

Thanks Gary, I have an LP-PAN and will continue to use it even though I have the P3. It is still needed if you want to run CWSkimmer. Even if I weren't going to use LP-PAN I would still want to keep LP-Bridge running because it allows multiple programs to control the K3 - one of those things

[Elecraft] learning CW...off topic elecraft reflector...

Bill... Good advice. You may be amused to hear MY version of "reading some printed material" while listening for phrases. I spent 15 months in "west" Germany (before the re-unification) as a guest of their gov't, and took along my Kenwood TS-520 and a fold-up vertical. All of my operation

Re: [Elecraft] [K3] MMTTY

And turn off all WINDOWS alterts, sounds when operating AFSK! 73 DE Brian/K3KO Richard Ferch wrote: > Mike, > > I have not found this to be critical at all, once the audio and VOX levels > are set. First, using manual keying adjust the level out from the sound > card and the LINE input level on

Re: [Elecraft] [K3] MMTTY

Mike, I have not found this to be critical at all, once the audio and VOX levels are set. First, using manual keying adjust the level out from the sound card and the LINE input level on the K3 to just get the required 4-5 bars of ALC. Then increase the K3's MAIN:VOX GN setting until the output fro

[Elecraft] K3 # 4518 is QRV

Hello Elecrafters, K3 #4518 arrived via UPS last Tuesday afternoon and made the first contact last night. The inventory and build took me about 11 hours over the course of 4 days with lots of stopping and starting. All the checks and calibrations went smoothly. The excellent documentation a

Re: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

Hi, Ted: Yes, the LP-Bridge requires one to keep the P3 turned off until the end. LP-Bridge is not required, of course, but I had left mine in play because I originally was running the P3 and the LP-PAN in parallel and hadn't gotten around to reassigning COM ports to my logging pr

Re: [Elecraft] (no subject) SPAM ALERT!!!

 Willis 'Cookie' Cooke K5EWJ From: Dale Putnam To: ki...@dospalos.org; dstev...@alldata.net; ab...@yahoo.com; ka5...@hotmail.com; elecraft@mailman.qth.net; safetyboss2...@msn.com; e...@elecraft.com Sent: Sun, August 8, 2010 5:18:25 AM Subject: [Elecraft] (

Re: [Elecraft] Backward balun

Al, your comments about Jerry's book makes me wonder even more about what you are trying to do with a backward 4:1 balun.  With a BS in Physics and 30 years as an EE I found the book anything but a cook book.  To begin to understand what I thought previously to be a simple device I had to drag

[Elecraft] LEARNING CW

As a long time high speed CW op, let me pass on an few of what I feel are the keys to learning to receive effortlessly at QRQ levels. The goal is to get to the point where listening to CW is exactly like listening to a conversation; that is, there is no conscious translation from dits and dahs

Re: [Elecraft] K3/P3/Quadra

Hi Larry: >I have a question about hooking up the P3 to the K3 12vdc out. > >I'm using a cable of your design and it's been really great. > >I'm using that output for the 12vdc sense voltage to turn the Quadra >on and off. > >My P3 will be here Monday. > >It seems to me the that cable they supply

Re: [Elecraft] K2 internal keyer problem

Mark, That has to be either a firmware glitch (not likely), or the result of RF-in-the-shack causing it. The internal keyer routines in the firmware have been in place for a long time, and this is the first report of that behavior that I have heard. If it were a firmware problem, I would thi

Re: [Elecraft] K3 + SDR-IQ + CW Skimmer+ SpectraVue

Why not publicly? Would be helpful to others, I should think, if it is possible. -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Paul Christensen Sent: Sunday, August 08, 2010 8:16 AM To: elecraft@mailman.qth.net Subject:

[Elecraft] K3 + SDR-IQ + CW Skimmer+ SpectraVue

Anyone know if it's possible to configure all four of the above to simultaneously run CW Skimmer and SpectraVue? I have tired every possible iteration to port audio from SpectraVue to CW Skimmer with no luck. I've also tried VAC and still no luck. If there's anyone that's successfully tried t

Re: [Elecraft] Backward balun

> I think one approach to take is to use a unun to transform down to 12 ohms > and > then a conventional 1:1 balun following that to transform to a balanced > feed. > I'll try this and report back if it doesn't work. You will have trouble. Lead lengths will kill SWR (as will lengths through con

[Elecraft] (no subject)

http://kodacimo.t35.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hos