Leave it at or?? Please expand on the "or".
Is the P3 a finished project "or" we ever see the ability to attach a larger
screen as was
mentioned here on the reflector. That ability was a consideration in the
original purchase.
73,
Bob
K2TK
On 10/14/2011 3:01 PM, Wayne Burdick wrote:
> We'r
It turns out that (20) DN7 or UP7 commands are not all that slow nor
inconvenient to use in a macro, in order to implement up- and down- 100 kHz
jumps... I can live with it, so please ignore my previous request. Thanks
anyway.
R,
Al W6LX
___
I got them on 20m and 17m with K3/10 and vertical. Not pure 5 W really, but
this is one of the hardest locations for QSO from here.
73, Val LZ1VB
> If it was too easy, try 5 W next time :)
>
> 73,
> Wayne
> N6KR
>
__
Elecraft mailing l
I worked on 10m SSB with 1 watt the other night. It's amazing what you can do
when the bands are open.
Rob
NV5E
> From: daleput...@hotmail.com
> To: n...@elecraft.com; w...@cox.net
> Date: Fri, 14 Oct 2011 19:32:29 -0600
> CC: elecraft@mailman.qth.net
>
There's one roofing filter option module, the KXFL3. It includes
bandwidths of 500 and 1500 Hz for CW and DATA modes, and 3000 Hz for
SSB mode.
73,
Wayne
N6KR
On Oct 14, 2011, at 8:50 PM, W7JJL wrote:
> How many roofing filters can you put into the KX3?
>
> Thanks
>
> John
> W7JJL
_
Guys;
The KRC2 Config program has problems. That is one of the reasons it is still
classified as beta. We are trying to line up the resources to fix the problems,
and will have something much better as soon as we can.
In the meantime, there is a detail that might actually help. When the Config
What's the difference between an "H" mode mixer and a ring mixer?
-
Jack WA9FVP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-H-Mode-Mixer-tp6889343p6894678.html
Sent from the Elecraft mailing list archive at Nabble.com.
_
Congrats. I have not caught them on 160 ssb or 80 ssb or rtty on those
bands. Hey you are not a real dxer until you xmit all over the DX! I
have done it. It is easy to do. Life goes on funny enough. You can
work lots of DX with 100w it takes more skill than keying up the big
amp. Have fu
Before this past week I've never operated anything but SSB. But with the
memories and decoding capabilities of the K3, plus being able to find
the holes in the pileups with the P3, I've got T32C on 19 out of the 21
slots my antenna is capable of. This setup makes it so easy.
73, Dennis NJ6G
On
How many roofing filters can you put into the KX3?
Thanks
John
W7JJL
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Filters-tp6894668p6894668.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
And you should be proud, Nate, that is a good accomplishment. Learning how, and
doing.. is a good thing.
Then doing it is best. Congratulations. And may many more get into your log too!
--... ...--
Dale - WC7S in Wy
> Date: Fri, 14 Oct 2011 22:16:19 -0500
> From: n...@n0nb.us
> To: elecraft@
And here I was proud of working them on 80m SSB around 0700z this past
Sunday morning with 100W and my low (22ft high) doublet. It took a
couple of calls but I'm in the log. I think that is my best DX on 80m
ever, not that I ever really tried before.
Let me say that the addition of the P3 makes
Hi To the Group -- I need one more KAT-100 for my second K2 -- anyone have
that they are not using--??
Let's talk --
Thanks -- Rick NU7Z
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
Congrats Jim, way to go...
and can you imagine the same kinda thrill with the same one call answer... at 5
watts, or 1 watt ?? They answer those calls too.
--... ...--
Dale - WC7S in Wy
> From: n...@elecraft.com
> To: w...@cox.net
> Date: Fri, 14 Oct 2011 18:27:30 -0700
> CC: elecraft@ma
If it was too easy, try 5 W next time :)
73,
Wayne
N6KR
On Oct 14, 2011, at 6:22 PM, Jim Sheldon wrote:
> Good grief, that was almost TOO EASY with the KPA500 on line! Heard
> them a few minutes ago on 14.182 indicating they were listening up
> 5. Hit split, cranked VFO B to 14.187. The a
Good grief, that was almost TOO EASY with the KPA500 on line! Heard them a few
minutes ago on 14.182 indicating they were listening up 5. Hit split, cranked
VFO B to 14.187. The amp was already in operate as I had just changed from 15
meter RTTY so I gave 'em a call. Green lights all over th
I agree with Johnny, this is the best work flow for these mods.
Bob
K6UJ
On Oct 14, 2011, at 5:45 PM, Johnny Siu wrote:
> Hello Phil,
>
> I would do the mods according the related portion of PCB, e.g.
>
> K3 Hardware AGC Threshold Mod Kit
> K3 Audio Line Out Mod Kit +K3 Remote I/O Board U
Neoklis,
Did you order the KXV3A option?
If yes, a resistor comes with that option. But your NEW K3 should not
need this resistor mod as it is only for older units (2009 and prior).
Please see the second mod down on the page below:
The Elecraft mods page is here:
http://www.elecraft.com/K3/k
Hello Phil,
I would do the mods according the related portion of PCB, e.g.
K3 Hardware AGC Threshold Mod Kit
K3 Audio Line Out Mod Kit +K3 Remote I/O Board Upgrade
K3 I/O Buffer Mod Kit
K3 VFO Tuning Noise Filter Kit
All the above are in the RF board. After that, do the DSP swap which is on
Phil,
I'd do the board/"plug in" mods first, then any soldering mods last if
possible. I'd only want to crack the case once, do the mods, close it
back up, then opcheck. The board mods should go very easily; the
soldering mods will depend on your skill/experience with a soldering
iron. Don't
I think I would do them all at once, opposed to doing one, rebuilding
the radio, tearing it apart etc.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/14/2011 5:59 PM, Phil Westover wrote:
> I just received the following mod kits from Elecraft:
>
>
I just received the following mod kits from Elecraft:
KPA3 12 v Sense Modification (1N4148)
K3 Hardware AGC Threshold Mod Kit
K3 Audio Line Out Mod Kit
K3 DSP Upgrade Swap
K3 I/O Buffer Mod Kit
K3 VFO Tuning Noise Filter Kit
K3 Remote I/O Board Upgrade
K3 Synth Stiffener
Question: Even though al
~
N2CQ QRP CONTEST CALENDAR
October 15 to November 13, 2011
LZ Open 80m Sprint (CW) ... QRP Category
Oct 15, z to 0400z
Rules: http://www.lzopen.com/lzocc80/index.htm
~~~
Hello ... Over the past couple of weeks I've noticed the screen on the P3 will
disappear and turn white for a split second ... It would do this every couple
of minutes.
Now the screen is blank and completely white ... none of the buttons have any
effet on the P3 .
Any suggestions ?
N4LA / Todd
Received the 250 Hz CW filter today and installed it in a short time. This is
the first time I have had the K3 open, as I bought it already assembled with a
few filters. Very nice looking inside! The filter is extremely sharp and this
is the first time I have experienced a very narrow, nicely ma
I have K2 serial number 4869 for sale. Radio works very well.
Radio has the following modules installed :
KNB2 Noise Blanker
KAT2 Antenna Tuner
K160RX 160 meter
KDSP2 DSP filter
KSB2 SSB
All manuals included. Used by a non smoker. Appearance is easy 9 out of 10.
The only reason for selling is to b
Somehow ONCE two plus years ago I managed after maybe 100 trys to
get the KRC-2 programmed to do what I wanted with it.
Now I would love to reprogram it for 6 meters but am scared to death to
attempt it. If somehow the KRC-2 does get reprogrammed but incorrectly
I fear I would never get it back
Does this problem persist with the v. 1.6 firmware that has just been released?
The
message announcing this listed "Fixed problem with serial communications when
loading
band-maps" as one of the changes.
I haven't tried it myself because I have a customized bandmap and at some point
became
u
Maybe some XP service pack changed a DLL that the program was dependent
on.
As a lark, I might try loading a 'donor' PC with an original unpatched
XP, to see if that works.
73,
-- Dave, N8SBE
> Original Message
> Subject: Re: [Elecraft] [K3]_[KRC2]_Is_there_a_KRC3_in_th e_w or
Thanks, Wayne.
Like I said, everyone at Elecraft has been super nice about this, but as
you say, priorities seem to be getting in the way of having someone look
into this.
Growing pains, I suppose. I appreciate you taking time from Pacificon
to contact me.
73,
-- Dave, N8SBE
> Origin
Sorry, Dave, the program was written in Visual Basic for an earlier PC
OS. Seems to work under XP in some but not all cases.
We're trying to line up a resource to update it. Everyone seems to be
working on the K3, or the KX3, or the KAT500, or... well, let's just
leave it at "or".
73,
Wayne
Let me pendantic here. The configuration program connects to the KRC2
when the program is started, but when I press the 'Send to KRC2' button,
it shows an error message saying it cannot connect.
I beleive this is the same behavior that some other on the mail list
have seen.
In all cases, I'm usi
To be clear, I have no issues with interfacing the KRC2 with external
devices.
The only issue I've had is using the Windows-based program provided on
the Elecraft web site to attempt to configure the behavior of the KRC2.
It always fails to connect to the KRC2, no matter what settings I try,
on b
> If you want a device that can control your bandpass filters and
> multiple antenna boxes look at the Microham Station Master. It
> gathers band data from the Aux line and looks pretty slick. If I
> needed a box that did more than just drive my bandpass filters I
> would own one!
Correction ...
I have had issues with my KRC2 much of it is the poor operations manual
and interfacing to the K3. Jack at Elecraft and Gary have been great to
work with. Many of my problems appear to have been from jumper issues.
The documentation needs some major work in the way of examples of how to
hook
Excellent news indeed!
Stephen G4SJP
On Friday, 14 October 2011, Heinz Bärtschi
wrote:
> Wayne,
>
> Excellent, many thanks!
>
> 73 es gl,
> Heinz HB9BCB
>
>
> -Ursprüngliche Nachricht-
> Von: Wayne Burdick [mailto:n...@elecraft.com]
> Gesendet: Freitag, 14. Oktober 2011 18:40
> An: Steph
It's highly likely that we'll design an adapter to allow the KX3 to
work with the P3.
73,
Wayne
N6KR
On Oct 14, 2011, at 9:12 AM, Stephen Prior wrote:
> As far as I aware Heinz, the KX3 has no IF output, so would not work
> with
> the P3.
>
> 73 Stephen G4SJP
>
> On Friday, 14 October 2011,
Hi Barry,
If you are interested in a 2T H-Mode Mixer to modify other equipment, a
different parts kit to be assembled is available.
I have studied and applied mods to different commercial equipment:.. ICOM
(IC751, 761, 765, 781, 775, YAESU (FT1000MP-MK-Field, FT920), KENWOOD
(TS850, TS940), Elecr
Robert,
It confirms that there is something damaged in the KPA100 wattmeter
circuit, which includes more than just D16 and D17.
However, D16 and D17 are the most probable failure points, so start there.
73,
Don W3FPR
On 10/14/2011 12:01 PM, Robert Clutson wrote:
> Re your advice 2 October
> Do
Don't hold your breath. I've been waiting literally for years to get
the configuration code fixed. Apparently because it works for some
folk, then it must be my fault I haven't been able to get it to work on
no less then three different computers, some with real serial ports.
I need to program i
As far as I aware Heinz, the KX3 has no IF output, so would not work with
the P3.
73 Stephen G4SJP
On Friday, 14 October 2011, Heinz Bärtschi
wrote:
> Will the KX3 communicate as well with the P3 as the K3 does?
>
> 73,
> Heinz HB9BCB
>
> _
Re your advice 2 October
Don,
Checked the output on external wattmeter at 20W power setting. Output is
100W.
Removed KPA 100 and checked K2 output on 1,2,5,10 & 15watt settings.
Output is close to setting and transmit bargraph display shows linear
changes.
Does this confirm faulty D16 and D17?
Th
Will the KX3 communicate as well with the P3 as the K3 does?
73,
Heinz HB9BCB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
T
Hi,
I just completed the first stage of my K3 kit (where now calibrations etc must
be made),
but there is a 27 Ohm 1/8 W resistor in the kit, which I haven't been able to
figure out
what its purpose is. I expect its for a mod of some kind but I have not figured
out which.
Any ideas please? I
N0OKS wrote:
>
> The price of the H mode mixer is about $193, delivered.
>
Could someone please post a link to where this mixer is offered for sale?
I'd be potentially interested in adapting it for other radios, not the K3.
Thanks & 73,
Barry N1EU
--
View this message in context:
http://el
Jim AB3CV wrote:
>
> Any suggestions for finding the last station worked in a pack?
>
One of the problems with RTTY pileups, as with the other modes, is many
people call endlessly. That makes it difficult, as you won't hear (or see)
just one signal when it's time for the caller to xmit a repor
Thank you very much for your comments.
Wayne recognized interesting results when we reported yhe MDS, DR and IP3
comparison figures. We have to appreciate his comment “A few K3 users in
extremely high-signal environments might benefit from a few extra dB of
dynamic range, at the cost of a mix
47 matches
Mail list logo